IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The --binary option, if used, causes all the binary values reported
in reporting commands to be displayed as "0" or "1" instead of descriptive
literal values (value "unknown" is still used for values that could not be
determined).
Also, add report/binary_values_as_numeric lvm.conf option with the same
functionality as the --binary option (the --binary option prevails
if both --binary cmd option and report/binary_values_as_numeric lvm.conf
option is used at the same time). The report/binary_values_as_numeric is
also profilable.
This makes it easier to use and check lvm reporting command output in scripts.
Accept --ignoreskippedcluster with pvs, vgs, lvs, pvdisplay, vgdisplay,
lvdisplay, vgchange and lvchange to avoid the 'Skipping clustered
VG' errors when requesting information about a clustered VG
without using clustered locking and still exit with success.
The messages can still be seen with -v.
Some of the names for various RAID options have been changed and the man
pages need to reflect it.
lvcreate:
from: minrecoveryrate to: [raid]minrecoveryrate
from: maxrecoveryrate to: [raid]maxrecoveryrate
* plus better clarity on what the arg to these options is
specifying
lvchange:
from: minrecoveryrate to: [raid]minrecoveryrate
from: maxrecoveryrate to: [raid]maxrecoveryrate
* plus better clarity on what the arg to these options is
specifying
from: syncaction to: [raid]syncaction
from: writebehind to [raid]writebehind
* plus change arg from BehindCount to IO/count
from: writemostly to: [raid]writemostly
* plus addition to document [:{t|n|y}] option
lvs:
from: mismatches to: raid_mismatch_count
from: sync_action to: raid_sync_action
add : raid_min|max_recovery_rate, raid_write_behind
Document following items:
configuration cascade (man lvm.conf)
--profile ProfileName (man lvm)
--detachprofile (man vgchange/lvchange)
-o vg_profile/lv_profile (man vgs/lvs)
Also document --config a bit so we can see where it fits in the
configuration cascade - will be documented more in following commit...
'lvchange' is used to alter a RAID 1 logical volume's write-mostly and
write-behind characteristics. The '--writemostly' parameter takes a
PV as an argument with an optional trailing character to specify whether
to set ('y'), unset ('n'), or toggle ('t') the value. If no trailing
character is given, it will set the flag.
Synopsis:
lvchange [--writemostly <PV>:{t|y|n}] [--writebehind <count>] vg/lv
Example:
lvchange --writemostly /dev/sdb1:y --writebehind 512 vg/raid1_lv
The last character in the 'lv_attr' field is used to show whether a device
has the WriteMostly flag set. It is signified with a 'w'. If the device
has failed, the 'p'artial flag has priority.
Example ("nosync" raid1 with mismatch_cnt and writemostly):
[~]# lvs -a --segment vg
LV VG Attr #Str Type SSize
raid1 vg Rwi---r-m 2 raid1 500.00m
[raid1_rimage_0] vg Iwi---r-- 1 linear 500.00m
[raid1_rimage_1] vg Iwi---r-w 1 linear 500.00m
[raid1_rmeta_0] vg ewi---r-- 1 linear 4.00m
[raid1_rmeta_1] vg ewi---r-- 1 linear 4.00m
Example (raid1 with mismatch_cnt, writemostly - but failed drive):
[~]# lvs -a --segment vg
LV VG Attr #Str Type SSize
raid1 vg rwi---r-p 2 raid1 500.00m
[raid1_rimage_0] vg Iwi---r-- 1 linear 500.00m
[raid1_rimage_1] vg Iwi---r-p 1 linear 500.00m
[raid1_rmeta_0] vg ewi---r-- 1 linear 4.00m
[raid1_rmeta_1] vg ewi---r-p 1 linear 4.00m
A new reportable field has been added for writebehind as well. If
write-behind has not been set or the LV is not RAID1, the field will
be blank.
Example (writebehind is set):
[~]# lvs -a -o name,attr,writebehind vg
LV Attr WBehind
lv rwi-a-r-- 512
[lv_rimage_0] iwi-aor-w
[lv_rimage_1] iwi-aor--
[lv_rmeta_0] ewi-aor--
[lv_rmeta_1] ewi-aor--
Example (writebehind is not set):
[~]# lvs -a -o name,attr,writebehind vg
LV Attr WBehind
lv rwi-a-r--
[lv_rimage_0] iwi-aor-w
[lv_rimage_1] iwi-aor--
[lv_rmeta_0] ewi-aor--
[lv_rmeta_1] ewi-aor--
New options to 'lvchange' allow users to scrub their RAID LVs.
Synopsis:
lvchange --syncaction {check|repair} vg/raid_lv
RAID scrubbing is the process of reading all the data and parity blocks in
an array and checking to see whether they are coherent. 'lvchange' can
now initaite the two scrubbing operations: "check" and "repair". "check"
will go over the array and recored the number of discrepancies but not
repair them. "repair" will correct the discrepancies as it finds them.
'lvchange --syncaction repair vg/raid_lv' is not to be confused with
'lvconvert --repair vg/raid_lv'. The former initiates a background
synchronization operation on the array, while the latter is designed to
repair/replace failed devices in a mirror or RAID logical volume.
Additional reporting has been added for 'lvs' to support the new
operations. Two new printable fields (which are not printed by
default) have been added: "syncaction" and "mismatches". These
can be accessed using the '-o' option to 'lvs', like:
lvs -o +syncaction,mismatches vg/lv
"syncaction" will print the current synchronization operation that the
RAID volume is performing. It can be one of the following:
- idle: All sync operations complete (doing nothing)
- resync: Initializing an array or recovering after a machine failure
- recover: Replacing a device in the array
- check: Looking for array inconsistencies
- repair: Looking for and repairing inconsistencies
The "mismatches" field with print the number of descrepancies found during
a check or repair operation.
The 'Cpy%Sync' field already available to 'lvs' will print the progress
of any of the above syncactions, including check and repair.
Finally, the lv_attr field has changed to accomadate the scrubbing operations
as well. The role of the 'p'artial character in the lv_attr report field
as expanded. "Partial" is really an indicator for the health of a
logical volume and it makes sense to extend this include other health
indicators as well, specifically:
'm'ismatches: Indicates that there are discrepancies in a RAID
LV. This character is shown after a scrubbing
operation has detected that portions of the RAID
are not coherent.
'r'efresh : Indicates that a device in a RAID array has suffered
a failure and the kernel regards it as failed -
even though LVM can read the device label and
considers the device to be ok. The LV should be
'r'efreshed to notify the kernel that the device is
now available, or the device should be 'r'eplaced
if it is suspected of failing.
The heading 'Copy%' is specific to PVMOVE volumes, but can be generalized
to apply to LVM mirrors also. It is a bit awkward to use 'Copy%' for
RAID 4/5/6, however - 'Sync%' would be more appropriate. This is why
RAID 4/5/6 have not displayed their sync status by any means available to
'lvs' yet.
Example (old):
[root@hayes-02 lvm2]# lvs vg
LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sy Convert
lv vg -wi-a---- 1.00g
raid1 vg rwi-a-r-- 1.00g 100.00
raid4 vg rwi-a-r-- 1.01g
raid5 vg rwi-a-r-- 1.01g
raid6 vg rwi-a-r-- 1.01g
This patch changes the heading to 'Cpy%Sync' and allows RAID 4/5/6 to print
their sync percent in this field.
Example (new):
[root@hayes-02 lvm2]# lvs vg
LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sync Convert
lv vg -wi-a---- 1.00g
raid1 vg rwi-a-r-- 1.00g 100.00
raid4 vg rwi-a-r-- 1.01g 100.00
raid5 vg rwi-a-r-- 1.01g 100.00
raid6 vg rwi-a-r-- 1.01g 100.00
A gentle reminder that anyone relying on the output of reporting commands
like lvs in scripts must use -o to guarantee they get the fields they expect.
The default sequence of fields can change from release to release.
Equally, the 'attr' fields can have new values introduced and/or characters
appended to them.
This is useful for when the snapshot is still active and merging hasn't
started yet; it shows a merge is pending. Once merging starts the
merging snapshot will be hidden but can still be displayed with 'lvs -a'
Report snapshot origin with merging snapshot as 'O' instead of 'o':
Before merge starts this shows that a merge is pending. While merging
the snapshot will be hidden, 'O' enables a user to see that there is a
snapshot merging.
Option --all is only partially documented currently, so document in all
commands. Also make {pv|vg|lv}{display|s} man pages consistent with help
output. Remove ununsed 'disk_ARG' parameter. Leave --trustcache out of
the man page output. Update --units argument to show all possible units.
Update units_to_bytes() to support (S)ectors: 500 bytes.
- 500 byte (S)ectors is of questionable value but it adds to consistency
if a user happens to use --units S. This seems better than an error.
Updated test/t-covercmd.sh to test --units [hS]
Document the units that can be displayed via --units uniformly.
- (p)etabytes and (e)xabytes were missing in pvs, vgs and lvs man pages.
Made lvreduce man page "... in units of megabytes." consistent (with the
lvextend and lvresize man pages).
http://bugzilla.redhat.com/show_bug.cgi?id=500861
- Update list of fields/columns for each command (a few missing).
- Update list order to match "-o help" output (easier to verify field list)
- Add "{pv|vg|lv}_all" description.
- Move "-o help" sentence above column/field list.
New sample man page for lvs (pvs and vgs are similar):
-o, --options
Comma-separated ordered list of columns. Precede the list with ’+’ to append to the
default selection of columns instead of replacing it.
Use -o lv_all to select all logical volume columns, and -o seg_all to select all logical
segment columns.
Use -o help to view the full list of columns available.
Column names include: lv_uuid, lv_name, lv_attr, lv_major, lv_minor, lv_read_ahead,
lv_kernel_major, lv_kernel_minor, lv_kernel_read_ahead, lv_size, seg_count, origin, ori-
gin_size, snap_percent, copy_percent, move_pv, convert_lv, lv_tags, mirror_log, modules,
segtype, stripes, stripesize, regionsize, chunksize, seg_start, seg_start_pe, seg_size,
seg_tags, seg_pe_ranges, devices.
With --segments, any "seg_" prefixes are optional; otherwise any "lv_" prefixes are
optional. Columns mentioned in vgs (8) can also be chosen.
The lv_attr bits are:
Add lvs origin_size field.
Fix linux configure --enable-debug to exclude -O2.
Still a few rough edges, but hopefully usable now:
lvcreate -s vg1 -L 100M --virtualoriginsize 1T
