1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

2407 Commits

Author SHA1 Message Date
Zdenek Kabelac
38188ff8aa Check result of lstat
If lstat returns errno different from ENOENT, do not use the content of
struct stat 'buf'.
2012-02-08 10:43:42 +00:00
Petr Rockai
c84c7ee034 What's new. 2012-02-01 20:13:44 +00:00
Alasdair Kergon
b93aa9eac4 post-release 2012-02-01 18:46:57 +00:00
Alasdair Kergon
d8e7d0e2bd pre-release 2012-02-01 15:17:04 +00:00
Zdenek Kabelac
433c583cd7 Add synchornization point in mirror log init.
Put extra sync point when mirror log is deactivated and before
it's activated for the second time.
2012-02-01 13:50:36 +00:00
Zdenek Kabelac
02f6f4902f Disable partial activation for thin LVs and LVs with all missing segments
Count number of error and existing areas and if there is no existing area
for the LV avoid its activation.

Always disable partial activatio for thin volumes.

For mirrors currently put in hack to let it pass with a special name
since current mirror code needs to activate such LV during some operations.
2012-02-01 13:47:27 +00:00
Zdenek Kabelac
90fd0f5b42 Avoid warning for small pv_min_size
Do not print warning for pv_min_size set in range between 512KB and 2MB.
2012-02-01 13:42:18 +00:00
Peter Rajnoha
56f6e9310d Clean up systemd unit ordering and requirements. 2012-02-01 13:08:39 +00:00
Zdenek Kabelac
f00a162500 User correct base dir for lcov reports
Fix problem when srcdir != builddir.
2012-02-01 10:46:45 +00:00
Alasdair Kergon
b94b757e1e Track unreserved space for all alloc policies and then permit NORMAL to place
log and data on same single PV.
2012-02-01 02:10:45 +00:00
Alasdair Kergon
8416129244 Automatically detect whether corosync clvmd needs to use confdb or cmap. (fabio) 2012-01-31 21:21:53 +00:00
Zdenek Kabelac
b329581e8e Fix data% reporting
For reading % of mapped size of thin volume use as origin for
old style snapshot '-real' device needs to be queried.
Fix log_error report given for lvs -a in this case.
2012-01-28 20:12:26 +00:00
Alasdair Kergon
09e8d81a53 post-release 2012-01-27 01:23:40 +00:00
Alasdair Kergon
f47f37485e pre-release 2012-01-26 14:02:42 +00:00
Zdenek Kabelac
baffb459d8 Test for uname result
in fail path initialize to 0.
2012-01-25 22:17:57 +00:00
Zdenek Kabelac
381deeed8f Fix missing dmt destructor
Also always initialize maj,min,patchlevel when success is returned.
2012-01-25 22:16:04 +00:00
Zdenek Kabelac
4343bc5e86 Limit alignment to 32bit values
to get the same behavior on 32/64 machines.
2012-01-25 21:52:53 +00:00
Zdenek Kabelac
5d1d269f45 Check for correctness of uint64 value if exists 2012-01-25 21:43:51 +00:00
Zdenek Kabelac
ec2012f736 Rename origin_only to more generic use_layer flag
Since now we have more layered devices i.e. thin volumes - support
selection of layer via flag.
2012-01-25 13:10:26 +00:00
Zdenek Kabelac
500806dda9 Update verbose lvs to print metadata_percent info
Update lvs  -o fields in WHATS_NEW.
2012-01-25 11:32:41 +00:00
Zdenek Kabelac
d7a3cf4744 Update lv_info whats_new 2012-01-25 09:00:57 +00:00
Zdenek Kabelac
f72b203392 Thin add lv_thin_pool_transaction_id
Easy function to get transaction_id status value.
2012-01-25 08:48:42 +00:00
Jonathan Earl Brassow
cb09dc1274 Use suspend|resume_origin_only when up-converting RAID LVs, as mirrors do.
Failure to do so results in "Performing unsafe table load while X device(s) are
known to be suspended" errors.  While fixing the problem in this way works and
is consistent with the way the mirror segment type does it, it would be nice
to find a solution that uses the generic suspend/resume calls.

Also included in this check-in are additions to the test suite that perform
conversions on RAID LVs under a snapshot.  These tests are disabled for the
time being due to a kernel bug that is yet to be tracked down.
2012-01-24 14:33:38 +00:00
Jonathan Earl Brassow
fe5199c506 Fix the way RAID meta LVs are added to the dependency tree.
Similar to the "mirror" segment type's log device, _add_dev_to_dtree should
be called and not _add_lv_to_dtree when adding metadata sub-LVs to the deptree.
Since _add_lv_to_dtree was being called, 'origin_only' could be set if a
snapshot sits on top of the RAID device.  This would cause the actual device
that needed to be added to be skipped in favor of the non-existant device,
"<foo>-real".
2012-01-23 20:56:42 +00:00
Alasdair Kergon
5aa7a0ec1c Attempt to improve clustered 'lvchange -aey' behaviour to try local node before
remote nodes and address some existing anomalies.
2012-01-21 05:29:51 +00:00
Mike Snitzer
7281c3ab01 Prompt if request is made to remove a snapshot whose "Merge failed". 2012-01-20 22:04:16 +00:00
Mike Snitzer
27393d999c Allow removal of an invalid snapshot that was to be merged on next activation.
Don't allow a user to merge an invalid snapshot.
2012-01-20 22:03:48 +00:00
Mike Snitzer
2ff68cece1 Use m and M lv_attr to indicate that a snapshot merge failed in lvs.
snapshot (m)erge failed, suspended snapshot (M)erge failed
2012-01-20 22:03:03 +00:00
Mike Snitzer
c25ad6e873 Differentiate between snapshot status of "Invalid" and "Merge failed". 2012-01-20 22:02:04 +00:00
Mike Snitzer
e756b80f56 Lookup snapshot usage percent of origin when a snapshot is merging. 2012-01-20 21:56:01 +00:00
Zdenek Kabelac
079473f10a Update lvdisplay to show more info about thin LVs
Reformat name and path how the LV is represented with lvm1 compatible option,
to switch to the old way - which had number of  problem - i.e. many links
do not exist - since for private devices we are not creating them.
Add more info about thin pools and volumes.
2012-01-20 16:59:58 +00:00
Zdenek Kabelac
a563ef56b8 Drop hack in segtype reporting
Since striped name function knows when to report 'linear' instead of
'stripe' type name - drop it from this place.

This fixes problem when reporting segtype e.g. for thin-pool which
is also using area_count=1 to store thin data device reference.

It also returns properly strduped memory instead of badly casted const char*.
2012-01-20 10:55:28 +00:00
Alasdair Kergon
cf22ba1971 . 2012-01-20 03:56:18 +00:00
Jonathan Earl Brassow
6bcd3263c2 Preserve exclusive activation of cluster mirror when converting.
This patch to the suspend code - like the similar change for resume -
queries the lock mode of a cluster volume and records whether it is active
exclusively.  This is necessary for suspend due to the possibility of
preloading targets.  Failure to check to exclusivity causes the cluster target
of an exclusively activated mirror to be used when converting - rather than
the single machine target.
2012-01-20 00:27:18 +00:00
Zdenek Kabelac
f7a26917f2 Drop unimplemented 2012-01-19 16:22:42 +00:00
Zdenek Kabelac
06849a0d6a Add support to keep info about creation time and host for each LV
Basic support to keep info when the LV was created.
Host and time is stored into LV mda section.

FIXME: Current version doesn't support configurable string via lvm.conf
and used fixed version strftime "%Y-%m-%d %T %z".
2012-01-19 15:31:45 +00:00
Alasdair Kergon
55bdb63f34 Make error message hit when preallocated memlock memory exceeded clearer. 2012-01-12 18:29:07 +00:00
Alasdair Kergon
75fe459800 Show read-only activation in display tools. 2012-01-12 16:58:43 +00:00
Alasdair Kergon
642da16c33 Add activation/read_only_volume_list to override LV permission in metadata. 2012-01-12 01:51:56 +00:00
Alasdair Kergon
661f154b66 Give priority to emcpower devices with duplicate PVIDs. 2012-01-11 20:38:42 +00:00
Zdenek Kabelac
7da3845926 Check for error code in _adjust_policy_params
If error is detected in _adjust_policy_params, break further command processing.
2012-01-09 12:31:52 +00:00
Zdenek Kabelac
51c8cf97af Support rounding of percentage upward
We want to keep this logic -
when LV is extend - extend the LV by at least given amount,
when LV is reduced - reduce the LV by at most given amount.

So for this the rounding needs to be used.
Current logic which seems to satisfy give rule is to round up all
extent values for LV resize upward except for values with '-' sign
that are round downward.

This patch also fixes the problem when  lvextend --use-polices tried
to extend LV the by i.e. 20% - but the resulting 20% were smaller
the extent size thus before this patch no extension happened.
2012-01-05 15:38:18 +00:00
Zdenek Kabelac
46a75dedb4 Use new dmeventd_lvm2_command function in dmeventd plugins.
For snapshot, prepare whole command in front into private buffer.
Add also some missing '\n' for syslog messages.
For raid and mirror only convert creation of command line string.
This should avoid any unbound growth of mempool for dm_split_names.
2011-12-22 16:37:01 +00:00
Zdenek Kabelac
c06fdae782 Add helper function dmeventd_lvm2_command().
Since this code is in all plugins - create a common helper function.
2011-12-22 15:55:21 +00:00
Zdenek Kabelac
47bc4f5191 Updated documentation for dmeventd.
Update man page style.
Mention raid and thin plugins.
Update help text printed by command to match man page.
2011-12-22 15:50:38 +00:00
Zdenek Kabelac
9e1ccf81c7 Drop extra stat before open of device
Since the !(dev->flags & DEV_REGULAR) code path just called
dev_name_confirmed() which has just called 'stat()' inside,
remove duplicate second stat() call here.
2011-12-21 13:24:24 +00:00
Zdenek Kabelac
88f8cbbb2e Do not lstat common path prefix
When both path have identical prefix i.e. /dev/disk/by-id
skip  2 x lstat() for /dev  /dev/disk /dev/disk/by-id
and directly lstat() only different part of the path.

Reduces amount of lstat calls on system with lots of devices.
2011-12-21 13:21:09 +00:00
Zdenek Kabelac
235028bf0f Add common initialization code for struct device
Avoid duplicate code and add _dev_init() where all common
member values are initialized.
2011-12-21 13:17:54 +00:00
Zdenek Kabelac
93bb35fd2b Always zalloc device structure
Since there is zalloc behind the macro, put 'z' into the name.
Make the 'use_malloc' code path also using zalloc() call,
so it also give zeroed area.
2011-12-21 13:14:54 +00:00
Zdenek Kabelac
b0f1e29335 Fix missing thread list manipulation
For manipulation with thread list to avoid race with timeout thread,
take also _timeout_mutex.
2011-12-21 13:03:06 +00:00
Zdenek Kabelac
1b9a70b6af Check lv pointer for NULL before derefence. 2011-12-21 12:59:22 +00:00
Zdenek Kabelac
2b61011439 Allow empty strings for description and creation_host config fields 2011-12-21 12:49:00 +00:00
Alasdair Kergon
14a165bf3f Reinstate support for format1 snapshots, but issue deprecated warning.
I anticipate removing support for snapshots with lvm1-formatted metadata in a
future release.
2011-12-20 00:02:18 +00:00
Alasdair Kergon
721119a388 Only use built-in stack size in clvmd - ignore lvm.conf. 2011-12-08 21:24:08 +00:00
Jonathan Earl Brassow
49d06db518 Add policy based automated repair of RAID logical volumes
The RAID plug-in for dmeventd now calls 'lvconvert --repair' to address failures
of devices in a RAID logical volume.  The action taken can be either to "warn"
or "allocate" a new device from any spares that may be available in the
volume group.  The action is designated by setting 'raid_fault_policy' in
lvm.conf - the default being "warn".
2011-12-06 19:30:15 +00:00
Jonathan Earl Brassow
80924bc9ff Don't allow two images to be split and tracked from a RAID LV at one time
Also, don't allow a splitmirror operation on a RAID LV that is already tracking
a split, unless the operation is to stop the tracking and complete the split.
Example:
~> lvconvert --splitmirrors 1 --trackchanges vg/lv /dev/sdc1
# Now tracking changes - image can be merged back or split-off for good
~> lvconvert --splitmirrors 1 -n new_name vg/lv /dev/sdc1
# ^ Completes split ^

If a split is performed on a RAID that is tracking an already split image and
PVs are provided, we must ensure that
 1) the already split LV is represented in the PVs
 2) we are careful to split only the tracked image
2011-12-01 00:21:04 +00:00
Jonathan Earl Brassow
824ec24322 Don't allow size change of RAID LV that is tracking changes for a split image
Don't allow size change of RAID sub-LVs independently
2011-12-01 00:13:16 +00:00
Jonathan Earl Brassow
64b817cbc6 Do not allow users to change the name of RAID sub-LVs or the name of the
RAID LV if it is tracking changes for a split image.
2011-12-01 00:09:34 +00:00
Jonathan Earl Brassow
37e5e5e9c2 WHATS_NEW for previous commit. 2011-12-01 00:05:40 +00:00
Jonathan Earl Brassow
02941f999c Support the ability to replace specific devices in a RAID array.
RAID is not like traditional LVM mirroring.  LVM mirroring required failed
devices to be removed or the logical volume would simply hang.  RAID arrays can
keep on running with failed devices.  In fact, for RAID types other than RAID1,
removing a device would mean substituting an error target or converting to a
lower level RAID (e.g. RAID6 -> RAID5, or RAID4/5 to RAID0).  Therefore, rather
than removing a failed device unconditionally and potentially allocating a
replacement, RAID allows the user to "replace" a device with a new one.  This
approach is a 1-step solution vs the current 2-step solution.

example> lvconvert --replace <dev_to_remove> vg/lv [possible_replacement_PVs]

'--replace' can be specified more than once.

example> lvconvert --replace /dev/sdb1 --replace /dev/sdc1 vg/lv
2011-11-30 02:02:10 +00:00
Alasdair Kergon
52a9ed70c4 Add activation/use_linear_target enabled by default. (prajnoha)
LVM metadata knows only of striped segments - not linear ones.
The activation code detects segments with a single stripe and switches
them to use the linear target.

If the new lvm.conf setting is set to 0 (e.g. in a test script), this
'optimisation' is turned off.
2011-11-28 20:37:51 +00:00
Zdenek Kabelac
57781b3c41 Cleanup test makefiles
Simplify /api makefile and use SUBDIRS target for test dir.
Properly cleanup Makefiles with distclean in /test.
Use symbolic links for shell scripts for non-srcdir compilation.
2011-11-23 12:21:41 +00:00
Alasdair Kergon
f0509623ce Move y/n prompts to stderr and repeat if response has both 'n' and 'y'.
(Note that in a future release we might make this stricter and insist
on exactly 'y' or 'n'.)
2011-11-23 01:34:38 +00:00
Petr Rockai
3ab1c64a47 More of WHATS_NEW. 2011-11-21 12:44:38 +00:00
Petr Rockai
72a4b0eada Update WHATS_NEW. 2011-11-21 12:33:56 +00:00
Alasdair Kergon
60d8256c38 Don't ignore configure --mandir and --infodir. 2011-11-20 20:52:09 +00:00
Zdenek Kabelac
4c10cc98c7 Drop pool memory allocated in lv_has_target_type
Remove FIXMES - there should not be any pool free call since
the memory pool is from device manager, and pool is detroyed
after the operation, so doing extra free here would not help here.

However lv_has_target_type() is using cmd mempool so here the extra
call for dm_pool_free makes sence.
2011-11-18 19:42:03 +00:00
Zdenek Kabelac
f8484c44cc Replace dynamic buffer allocations for PATH_MAX
Use static buffer instead of stack allocated buffer.
This reduces stack size usage of lvm tool and the
change is very simple.

Since the whole library is not thread safe - it should not
add any new problems - and if there will be some conversion
it's easy to convert this to use some preallocated buffer.
2011-11-18 19:31:09 +00:00
Zdenek Kabelac
f1f5572fbb Unlock memory for vg_write
For write we do not need to hold memory locked.
This relaxes many conditions and avoid problems when allocating
a lot of memory for writting metadata buffers.
(In case of huge MDA size this would lead to mismatch between
locked and unlocked memory region size).

Add also internal check we are not writing in critical section.
2011-11-18 19:28:00 +00:00
Zdenek Kabelac
367ae9e86d Query before removing inactive snapshots
Removal of an inactive origin removes also all related snapshots.

When we now support 'old' external snapshots with thin volumes,
removal of pool will not only drop all thin volumes, but as
a consequence also all snapshots - which might be seen a bit
unexpected for the user - so add a query to confirm such action.

lvremove -f will skip the prompt.
2011-11-18 19:25:20 +00:00
Zdenek Kabelac
a21275e1b2 Allow to activate snapshot
Add extra code to active and deactivate related
snapshots and origin when user specifies snapshot
logical volume as lvchange parameter.

Before patch:

$> lvs -a
  LV    VG   Attr     LSize  Pool Origin Snap%  Move Log Copy%  Convert
  lvol0 mvg  owi-a-s-  1.00k
  lvol1 mvg  swi-a-s- 16.00k      lvol0    0.00
  lvol2 mvg  swi-a-s- 16.00k      lvol0    0.00

$> lvchange -an mvg/lvol2; echo $?
  Can't change snapshot logical volume "lvol2".
5

After patch:

$> lvchange -an mvg/lvol2
Change of snapshot lvol2 will also change its origin lvol0 and 1 other
snapshot(s). Proceed? [y/n]: n
  Logical volume lvol2 not changed.

$> lvchange -y -an mvg/lvol2; echo $?
0

$> lvs -a
  LV    VG   Attr     LSize  Pool Origin Snap%  Move Log Copy%  Convert
  lvol0 mvg  owi---s-  1.00k
  lvol1 mvg  swi---s- 16.00k      lvol0
  lvol2 mvg  swi---s- 16.00k      lvol0
2011-11-18 19:22:49 +00:00
Zdenek Kabelac
0ae01cf29d Skip non-virtual snapshots for availability
Change the behavior of availability change.
With this patch the lvgchange returns success
when VG is properly changed.

It skips non-virtual origins from being changes when
only 'vg' is specified as lvchange -a parameter.

Before this change we had this:

$> lvs -a
  LV    VG   Attr     LSize   Pool Origin
  lvol0 mvg  owi-a-s- 128.00k
  lvol1 mvg  owi-a-s- 128.00k
  lvol2 mvg  swi-a-s-   1.25m      lvol0
  lvol3 mvg  swi-a-s-   1.25m      lvol1

$> lvchange -an mvg ; echo $?
  Can't change snapshot logical volume "lvol2".
  Can't change snapshot logical volume "lvol3".
5

$> lvs -a
  LV    VG   Attr     LSize   Pool Origin
  lvol0 mvg  owi---s- 128.00k
  lvol1 mvg  owi---s- 128.00k
  lvol2 mvg  swi---s-   1.25m      lvol0
  lvol3 mvg  swi---s-   1.25m      lvol1

$> lvchange -ay mvg ; echo $?
  Can't change snapshot logical volume "lvol2".
  Can't change snapshot logical volume "lvol3".
5

$> lvs
  LV    VG   Attr     LSize   Pool Origin
  lvol0 mvg  owi-a-s- 128.00k
  lvol1 mvg  owi-a-s- 128.00k
  lvol2 mvg  swi-a-s-   1.25m      lvol0
  lvol3 mvg  swi-a-s-   1.25m      lvol1

After commit:

$> lvs -a
  LV    VG   Attr     LSize   Pool Origin
  lvol0 mvg  owi-a-s- 128.00k
  lvol1 mvg  owi-a-s- 128.00k
  lvol2 mvg  swi-a-s-   1.25m      lvol0
  lvol3 mvg  swi-a-s-   1.25m      lvol1

$> lvchange -an mvg ; echo $?
0

$> lvs -a
  LV    VG   Attr     LSize   Pool Origin
  lvol0 mvg  owi---s- 128.00k
  lvol1 mvg  owi---s- 128.00k
  lvol2 mvg  swi---s-   1.25m      lvol0
  lvol3 mvg  swi---s-   1.25m      lvol1

$> lvchange -ay mvg ; echo $?
0

$> lvs -a
  LV    VG   Attr     LSize   Pool Origin
  lvol0 mvg  owi-a-s- 128.00k
  lvol1 mvg  owi-a-s- 128.00k
  lvol2 mvg  swi-a-s-   1.25m      lvol0
  lvol3 mvg  swi-a-s-   1.25m      lvol1
2011-11-18 19:19:22 +00:00
Zdenek Kabelac
986a6d9d85 Adjusted mirror region size only for mirrors and raids
Update region_size only for mirror and raid targets.
This fixes warning messages when vg is using small
extent size like 1KiB and no mirror/raid is created,
but the user still got the message:

$> vgcreate -s 1K vg  <pvs>
$> lvcreate -L10K vg
Using reduced mirror region size of 4 sectors
2011-11-15 17:32:12 +00:00
Zdenek Kabelac
a6d0767d3e Reorder AND test condition
Take the easiest condition for checking first since they must
apply all together, check local conditions first before doing
more expensive tests.
2011-11-15 17:27:41 +00:00
Peter Rajnoha
26ab12e69d Avoid 'mda inconsistency' by properly registering UNLABELLED_PV flag (2.02.86).
When a PV label write is deferred to a vg_write call (as introduced by a patch
in 2.02.86), the PV is flagged with the internal UNLABELLED_PV flag. However,
when calling vg_archive before vg_write, we still have the PV labelled with the
UNLABELLED_PV flag which was not recognised as a proper flag while exporting
VG metadata:

  # vgcreate vg /dev/sda
  No physical volume label read from /dev/sda
  Metadata inconsistency: Not all flags successfully exported.
  Metadata inconsistency: Not all flags successfully exported.
  Writing physical volume data to disk "/dev/sda"
  Physical volume "/dev/sda" successfully created
  Volume group "vg" successfully created
2011-11-15 11:54:15 +00:00
Alasdair Kergon
dd815a4f7b Make dmsetup.static and lvm.static build when dmeventd is disabled.
udev may also need to be disabled if you didn't build it statically too.

dmeventd.static could be fixed with some more work but I don't really see the
point: without dlopen() it's useless, and if you have dlopen(), why not support
normal shared libraries too?
2011-11-14 21:30:35 +00:00
Alasdair Kergon
b5518cb1ea Move gentoo MAKEDEV to /sbin in lvm2create_initrd. (James Le Cuirot) 2011-11-12 17:03:53 +00:00
Milan Broz
5584ecf7a2 Do not scan device if it is part of active multipath.
Add filter which tries to check if scanned device is part
of active multipath.

Firstly, only SCSI major number devices are handled in filter.

Then it checks if device has exactly one holder (in sysfs) and
if it is device-mapper device and DM-UUID is prefixed by "MPATH-".

If so, this device is filtered out.

The whole filter can be switched off by setting
mpath_component_detection in lvm.conf.

https://bugzilla.redhat.com/show_bug.cgi?id=597010

Signed-off-by: Milan Broz <mbroz@redhat.com>
2011-11-11 15:11:08 +00:00
Zdenek Kabelac
1e6910032e Update lvs man page style. 2011-11-08 12:16:53 +00:00
Zdenek Kabelac
ae6833c8fa Add missing default LVM_VG_NAME
Add support for exported shell variable LVM_VG_NAME also
for thins and snapshots.
2011-11-07 11:01:53 +00:00
Zdenek Kabelac
32227d4720 Avoid lvextend to overflow
Add extra check to extent_count overflow.
Use internal define MAX_EXTENT_COUNT instead UINT32_MAX.
2011-11-04 22:49:53 +00:00
Alasdair Kergon
b316ae6fd1 Add missing lvrename mirrored log recursion in for_each_sub_lv. 2011-11-04 01:31:23 +00:00
Zdenek Kabelac
82a46ed62c Improve lv_extend stack reporting
and some code cleanup with setting return value.
2011-10-28 20:23:24 +00:00
Zdenek Kabelac
20e6a4528a Extend virtual segment instead of adding new one
Before adding a new virtual segment to LV, check first whether
the last segment isn't already of the same type. In this case
extend last segment instead of creating the new one.

Thin volumes should have always only 1 virtual segment, but it
helps also to virtual snapshot or error segtype..
2011-10-28 20:17:55 +00:00
Zdenek Kabelac
7aa87822f7 Add last_seg
Implement a function to return the last segment in a LV.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2011-10-28 20:12:54 +00:00
Zdenek Kabelac
f542af20e2 Add find_config_tree_str_allow_empty
Add function to allow read of empty strings as valid arguments.
Add a warning message if string argument has ignored value.
2011-10-28 20:06:49 +00:00
Jonathan Earl Brassow
0fd3c2aa2b Disallow 'mirrored' log for cluster mirrors.
Git commit ID 0864378250 was meant to disallow
'mirrored' logs for cluster mirrors.  However, when add_mirror_log is used
to create the log (as is now the case when using 'lvcreate' or converting only
the log) the check is bypassed.

This patch adds the check to add_mirror_log.
2011-10-25 13:17:04 +00:00
Zdenek Kabelac
80cdb5240e Don't print char type[8] as a plain string
pvck prints 'extra' character from the label since there is no '\0'
after the struct label entry and just uint64_t follows directly.
So avoid it by limiting 8 chars to be printed.

https://www.redhat.com/archives/lvm-devel/2011-January/msg00109.html

Signed-off-by: Paul Bolle <pebolle tiscali nl>
2011-10-24 10:24:39 +00:00
Zdenek Kabelac
13cca48ddc Drop mempool parameter from read functions
Use implicit vgmem pool.
2011-10-23 16:05:45 +00:00
Zdenek Kabelac
f5aee12510 Always use vg memory pool for allocated lv segment
Remove mem pool parameter from alloc_lv_segment()
Since we should always allocate LV segment from the vg mempool.
2011-10-23 16:02:01 +00:00
Zdenek Kabelac
a675bc3d0a Reduce stack size usage in print_log
As the buf2[] and locn[] can't be used at the same time, safe 1 page from
stack memory.
2011-10-22 16:52:00 +00:00
Zdenek Kabelac
b7bbad9964 Make move_lv_segment non-static
This function could be useful for other _manip source files.

Use dm_list manipulation function for provided functionality,
which make the code more readable and avoid touching list
internal details here.
2011-10-22 16:42:10 +00:00
Alasdair Kergon
bd86888d74 Pass exclusive LV locks to all nodes in the cluster.
This was the intended behaviour, as described in the lvchange man page, so you
have complete control through volume_list in lvm.conf, but the code seems to
have been treating -ae as local-only for a very long time.
2011-10-21 15:49:45 +00:00
Zdenek Kabelac
2604d06ec8 Make units for chunksize more obvious 2011-10-21 09:53:16 +00:00
Zdenek Kabelac
90f6336f85 Improve lvcreate man page
Split syntax for thin-pool since it cannot be fully matched with snapshot.
So to avoid more confusion - take thin support into separate line.

Though still significant updates are needed for thin provisioning.
2011-10-19 16:49:13 +00:00
Petr Rockai
2a8662ce2e New. 2011-10-19 09:01:03 +00:00
Jonathan Earl Brassow
c954b73149 cmirrord now returns log name to kernel in CTR so it can be registered
Version 2 of the userspace log protocol accepts return information during the
DM_ULOG_CTR exchange.  The return information contains the name of the log
device that is being used (if there is one).  The kernel can then register the
device via 'dm_get_device'.  Amoung other things, this allows for userspace to
assemble a correct dependency tree of devices - critical for LVM handling of
suspend/resume calls.

Also, update dm-log-userspace.h to match the kernel header associated with
this protocol change.  (Includes a version inc.)
2011-10-14 14:18:49 +00:00
Zdenek Kabelac
878960cdba Fix lv_info open_count test
When verify_udev_operations was disable, code for stacking fs operation for
lvm links was completely disable - but this code was also used for collecting
information, that a new node is being created.

Add a new flag which is set when a creation of lv symlinks is requested which
should restore old behaviour of lv_info function, that has called fs_sync()
before quere for open count on device.
2011-10-14 13:23:47 +00:00
Zdenek Kabelac
e65626090b Simplify worker loop
Do not reacquire mutex several times without a real reason.
Code readability is also better.
2011-10-11 09:54:39 +00:00
Zdenek Kabelac
b39f294d02 Use barrier instead of mutex
Barrier is supposed to be used in situation like this
and replace tricky mutex usage, where mutex has been unlocked
by a different thread than the locking thread.
2011-10-11 09:26:04 +00:00
Zdenek Kabelac
584a487461 Update 2011-10-11 09:20:17 +00:00
Zdenek Kabelac
d2cd3f4b76 Update whats new 2011-10-11 09:14:51 +00:00
Zdenek Kabelac
3701873dc9 Check for refresh_filter failure
Properly detect if the filters were refreshed properly.

(May needs few more fixes ??)

Filter refresh may fail because it may be out of free file descriptors
when clvmd gets overloaded.
2011-10-11 09:09:00 +00:00
Zdenek Kabelac
fea9b4eaa3 Use condition instead of sleep
Replace usleep with pthread condition to increase speed testing
(for simplicity just 1 condition for all locks).

Use thread mutex also for unlock resource (so it wakes up awaiting
threads)

Better check some error states and return error in fail case with
unlocked mutex.
2011-10-11 09:05:20 +00:00
Zdenek Kabelac
d70b1eea5d Improve backtrace reporting
Add <backtrace> so the function appears logged for the fail path.
2011-10-11 08:59:42 +00:00
Zdenek Kabelac
0c92ec4d21 Change message severity
Using log_warn to report missing symlinks as warning, since the command
itself returns as successful, we should not produce log_error().
log_warn is better fit here.
2011-10-11 08:57:13 +00:00
Jonathan Earl Brassow
2c80ace622 Add the ability to convert LVs of "mirror" segtype to "raid1" segtype.
Example:
~> lvconvert --type raid1 vg/mirror_lv

Steps to convert "mirror" to "raid1"
1) Allocate a RAID metadata LV for each mirror image from the same PVs
   on which they are located.
2) Clear the metadata LVs.  This involves writing LVM metadata, so we don't
   change any aspects of the mirror LV before this so that the user can easily
   remove LVs from the failed convert attempt while retaining the original
   mirror.
3) Remove the mirror log, if it exists.
4) Add metadata LVs to mirror LV
5) Rename mirror sub-lvs (s/mimage/rimage/)
6) Change flags and segtype from mirror to raid1
2011-10-07 14:56:01 +00:00
Jonathan Earl Brassow
50a48b38f5 Add the ability to convert linear LVs to RAID1
Example:
~> lvconvert --type raid1 -m 1 vg/lv

The following steps are performed to convert linear to RAID1:
1) Allocate a metadata device from the same PV as the linear device
   to provide the metadata/data LV pair required for all RAID components.
2) Allocate the required number of metadata/data LV pairs for the
   remaining additional images.
3) Clear the metadata LVs.  This performs a LVM metadata update.
4) Create the top-level RAID LV and add the component devices.

We want to make any failure easy to unwind.  This is why we don't create the
top-level LV and add the components until the last step.  Should anything
happen before that, the user could simply remove the unnecessary images.  Also,
we want to ensure that the metadata LVs are cleared before forming the array to
prevent stale information from polluting the new array.

A new macro 'seg_is_linear' was added to allow us to distinguish linear LVs
from striped LVs.
2011-10-07 14:52:26 +00:00
Jonathan Earl Brassow
76ab264200 Allow 'nosync' extension of mirrors.
This patch allows a mirror to be extended without an initial resync of the
extended portion.  It compliments the existing '--nosync' option to lvcreate.
This action can be done implicitly if the mirror was created with the '--nosync'
option, or explicitly if the '--nosync' option is used when extending the device.

Here are the operational criteria:
1) A mirror created with '--nosync' should extend with 'nosync' implicitly
[EXAMPLE]# lvs vg; lvextend -L +5G vg/lv ; lvs vg
  LV   VG   Attr     LSize Pool Origin Snap%  Move Log     Copy%  Convert
  lv   vg   Mwi-a-m- 5.00g                         lv_mlog 100.00
  Extending 2 mirror images.
  Extending logical volume lv to 10.00 GiB
  Logical volume lv successfully resized
  LV   VG   Attr     LSize  Pool Origin Snap%  Move Log     Copy%  Convert
  lv   vg   Mwi-a-m- 10.00g                         lv_mlog 100.00

2) The 'M' attribute ('M' signifies a mirror created with '--nosync', while 'm'
signifies a mirror created w/o '--nosync') must be preserved when extending a
mirror created with '--nosync'.  See #1 for example of 'M' attribute.

3) A mirror created without '--nosync' should extend with 'nosync' only when
'--nosync' is explicitly used when extending.
[EXAMPLE]# lvs vg; lvextend -L +5G vg/lv; lvs vg
  LV   VG   Attr     LSize  Pool Origin Snap%  Move Log     Copy%  Convert
  lv   vg   mwi-a-m- 20.00m                         lv_mlog 100.00
  Extending 2 mirror images.
  Extending logical volume lv to 5.02 GiB
  Logical volume lv successfully resized
  LV   VG   Attr     LSize Pool Origin Snap%  Move Log     Copy%  Convert
  lv   vg   mwi-a-m- 5.02g                         lv_mlog   0.39
vs.
[EXAMPLE]# lvs vg; lvextend -L +5G vg/lv --nosync; lvs vg
  LV   VG   Attr     LSize  Pool Origin Snap%  Move Log     Copy%  Convert
  lv   vg   mwi-a-m- 20.00m                         lv_mlog 100.00
  Extending 2 mirror images.
  Extending logical volume lv to 5.02 GiB
  Logical volume lv successfully resized
  LV   VG   Attr     LSize Pool Origin Snap%  Move Log     Copy%  Convert
  lv   vg   Mwi-a-m- 5.02g                         lv_mlog 100.00

4) The 'm' attribute must change to 'M' when extending a mirror created without
'--nosync' is extended with the '--nosync' option.  (See #3 examples above.)

5) An inactive mirror's sync percent cannot be determined definitively, so it
must not be allowed to skip resync.  Instead, the extend should ask the user if
they want to extend while performing a resync.
[EXAMPLE]# lvchange -an vg/lv
[EXAMPLE]# lvextend -L +5G vg/lv
  Extending 2 mirror images.
  Extending logical volume lv to 10.00 GiB
  vg/lv is not active.  Unable to get sync percent.
Do full resync of extended portion of vg/lv?  [y/n]: y
  Logical volume lv successfully resized

6) A mirror that is performing recovery (as opposed to an initial sync) - like
after a failure - is not allowed to extend with either an implicit or
explicit nosync option.  [You can simulate this with a 'corelog' mirror because
when it is reactivated, it must be recovered every time.]
[EXAMPLE]# lvcreate -m1 -L 5G -n lv vg --nosync --corelog
  WARNING: New mirror won't be synchronised. Don't read what you didn't write!
  Logical volume "lv" created
[EXAMPLE]# lvs vg
  LV   VG   Attr     LSize Pool Origin Snap%  Move Log Copy%  Convert
  lv   vg   Mwi-a-m- 5.00g                             100.00
[EXAMPLE]# lvchange -an vg/lv; lvchange -ay vg/lv; lvs vg
  LV   VG   Attr     LSize Pool Origin Snap%  Move Log Copy%  Convert
  lv   vg   Mwi-a-m- 5.00g                               0.08
[EXAMPLE]# lvextend -L +5G vg/lv
  Extending 2 mirror images.
  Extending logical volume lv to 10.00 GiB
  vg/lv cannot be extended while it is recovering.

7) If 'no' is selected in #5 or if the condition in #6 is hit, it should not
result in the mirror being resized or the 'm/M' attribute being changed.


NOTE:  A mirror created with '--nosync' behaves differently than one created
without it when performing an extension.  The former cannot be extended when
the mirror is recovering (unless in-active), while the latter can.  This is
a reasonable thing to do since recovery of a mirror doesn't take long (at
least in the case of an on-disk log) and it would cause far more time in
degraded mode if the extension w/o '--nosync' was allowed.  It might be
reasonable to add the ability to force the operation in the future.  This
should /not/ force a nosync extension, but rather force a sync'ed extension.
IOW, the user would be saying, "Yes, yes... I know recovery won't take long
and that I'll be adding significantly to the time spent in degraded mode, but
I need the extra space right now!".
2011-10-06 15:32:26 +00:00
Jonathan Earl Brassow
1986e51928 Fix splitmirror in cluster having different DM/LVM views of storage.
This patch also does some clean-up of the splitmirrors code.

I've attempted to clean-up the splitmirrors code to make it easier to
understand with fewer operations.  I've tried to reduce the number of
metadata operations without compromising the intermediate stages which
are necessary for easy clean-up in the even of failure.

These changes now correctly handle cluster situations - including exclusive
cluster mirrors.  Whereas before, a splitmirror operation would result in
remote nodes having LVM commands report the newly split LV with a proper
name while DM commands would report the old (pre-split) names of the device.
IOW, there was a kernel/userspace mismatch.
2011-10-06 14:55:39 +00:00
Jonathan Earl Brassow
f7235e7cb4 Revert initial solution to bug 733114 - I/O error message during splitmirror
The original commit comments can be located via this git commit ID:
	7d8e615c0b

There were three possible solutions to the original problem proposed in the
initial check-in.  The one chosen was as follows:
    2) Do like _remove_mirror_images does and suspend the original, then suspend
    the sub-lv (the error target), then resume the sub-lv, and finally resume the
    original LV.  This seems like extra pointless operations to me, but it doesn't
    produce the error message (although, I'm not sure why) and it allows us to
    leave the visible flag in place.
Turns out, the cluster also views the extra suspend/resume operations as
pointless too and ignores them.  So, this solution doesn't work in a cluster.
Further, I've noticed that in addition to the remote cluster nodes still getting
I/O errors from scanning the error target, they also have a different LVM and
DM views of the same LV.  IOW, while the LVM level (gotten from the LVM metadata)
sees the correct name for the newly split LV, device-mapper still maintains the
old names.

Because the original fix failed to completely fix the problem (or work-around it)
and because a better solution must be found to address the additional cluster
issue of device renaming, I am reverting the above mentioned commit.
2011-10-06 14:49:16 +00:00
Jonathan Earl Brassow
857339758f This patch fixes issues with improper udev flags on sub-LVs.
The current code does not always assign proper udev flags to sub-LVs (e.g.
mirror images and log LVs).  This shows up especially during a splitmirror
operation in which an image is split off from a mirror to form a new LV.

A mirror with a disk log is actually composed of 4 different LVs: the 2
mirror images, the log, and the top-level LV that "glues" them all together.
When a 2-way mirror is split into two linear LVs, two of those LVs must be
removed.  The segments of the image which is not split off to form the new
LV are transferred to the top-level LV.  This is done so that the original
LV can maintain its major/minor, UUID, and name.  The sub-lv from which the
segments were transferred gets an error segment as a transitory process
before it is eventually removed.  (Note that if the error target was not put
in place, a resume_lv would result in two LVs pointing to the same segment!
If the machine crashes before the eventual removal of the sub-LV, the result
would be a residual LV with the same mapping as the original (now linear) LV.)
So, the two LVs that need to be removed are now the log device and the sub-LV
with the error segment.  If udev_flags are not properly set, a resume will
cause the error LV to come up and be scanned by udev.  This causes I/O errors.
Additionally, when udev scans sub-LVs (or former sub-LVs), it can cause races
when we are trying to remove those LVs.  This is especially bad during failure
conditions.

When the mirror is suspended, the top-level along with its sub-LVs are
suspended.  The changes (now 2 linear devices and the yet-to-be-removed log
and error LV) are committed.  When the resume takes place on the original
LV, there are no longer links to the other sub-lvs through the LVM metadata.
The links are implicitly handled by querying the kernel for a list of
dependencies.  This is done in the '_add_dev' function (which is recursively
called for each dependency found) - called through the following chain:
	_add_dev
	dm_tree_add_dev_with_udev_flags
	<*** DM / LVM divide ***>
	_add_dev_to_dtree
	_add_lv_to_dtree
	_create_partial_dtree
	_tree_action
	dev_manager_activate
	_lv_activate_lv
	_lv_resume
	lv_resume_if_active
When udev flags are calculated by '_get_udev_flags', it is done by referencing
the 'logical_volume' structure.  Those flags are then passed down into
'dm_tree_add_dev_with_udev_flags', which in turn passes them to '_add_dev'.
Unfortunately, when '_add_dev' is finding the dependencies, it has no way to
calculate their proper udev_flags.  This is because it is below the DM/LVM
divide - it doesn't have access to the logical_volume structure.  In fact,
'_add_dev' simply reuses the udev_flags given for the initial device!  This
virtually guarentees the udev_flags are wrong for all the dependencies unless
they are reset by some other mechanism.  The current code provides no such
mechanism.  Even if '_add_new_lv_to_dtree' were called on the sub-devices -
which it isn't - entries already in the tree are simply passed over, failing
to reset any udev_flags.  The solution must retain its implicit nature of
discovering dependencies and be able to go back over the dependencies found
to properly set the udev_flags.

My solution simply calls a new function before leaving '_add_new_lv_to_dtree'
that iterates over the dtree nodes to properly reset the udev_flags of any
children.  It is important that this function occur after the '_add_dev' has
done its job of querying the kernel for a list of dependencies.  It is this
list of children that we use to look up their respective LVs and properly
calculate the udev_flags.

This solution has worked for single machine, cluster, and cluster w/ exclusive
activation.
2011-10-06 14:45:40 +00:00
Jonathan Earl Brassow
29044ecb22 Fix vgsplit when there are mirrors that have mirrored logs.
The problem as reported by "ben <benscott@nwlink.com>" on lvm-devel:

vgsplit fails with mirrored mirror log

#lvs --all -o lv_name,lv_attr,devices
LV                       Attr   Devices
MyMirror                 mwi--
[MyMirror_mimage_0]      Iwi--- /dev/sdq(0)
[MyMirror_mimage_1]      Iwi--- /dev/sdo(0)
[MyMirror_mimage_2]      Iwi--- /dev/sdi(0)
[MyMirror_mlog]          mwi---
[MyMirror_mlog_mimage_0] Iwi--- /dev/sds(0)
[MyMirror_mlog_mimage_1] Iwi--- /dev/sde(0)

#vgsplit -v "TestA" "TestB" "/dev/sdq" "/dev/sdo" "/dev/sdi" "/dev/sds"
"/dev/sde"
  Checking for volume group "TestA"
  Checking for new volume group "TestB"
  Archiving volume group "TestA" metadata (seqno 213).
Can't split mirror MyMirror between two Volume Groups

AFTER FIX:

[root@bp-01 ~]# lvs -a -o name,vg_name,devices vg new
  Volume group "new" not found
  Skipping volume group new
  LV                 VG   Devices
  lv                 vg   lv_mimage_0(0),lv_mimage_1(0)
  [lv_mimage_0]      vg   /dev/sdb1(0)
  [lv_mimage_1]      vg   /dev/sdc1(0)
  [lv_mlog]          vg   lv_mlog_mimage_0(0),lv_mlog_mimage_1(0)
  [lv_mlog_mimage_0] vg   /dev/sdh1(0)
  [lv_mlog_mimage_1] vg   /dev/sdi1(0)
[root@bp-01 ~]# vgsplit vg new /dev/sd[bchi]1
  New volume group "new" successfully split from "vg"
[root@bp-01 ~]# lvs -a -o name,vg_name,devices vg new
  LV                 VG   Devices
  lv                 new  lv_mimage_0(0),lv_mimage_1(0)
  [lv_mimage_0]      new  /dev/sdb1(0)
  [lv_mimage_1]      new  /dev/sdc1(0)
  [lv_mlog]          new  lv_mlog_mimage_0(0),lv_mlog_mimage_1(0)
  [lv_mlog_mimage_0] new  /dev/sdh1(0)
  [lv_mlog_mimage_1] new  /dev/sdi1(0)
2011-10-06 14:17:45 +00:00
Alasdair Kergon
43dce243ab Clarify multi-name device filter pattern matching explanation in lvm.conf.5. 2011-10-04 20:49:24 +00:00
Zdenek Kabelac
f683063d42 Add lvm functions for sending messages.
Functions are currently only needed for thin provissioning.
2011-10-03 18:37:47 +00:00
Alasdair Kergon
e0948b5825 Introduce revert_lv for better pvmove cleanup.
(One further fix needed to remove the stray pvmove LVs left behind.)
2011-09-27 22:43:40 +00:00
Alasdair Kergon
691157a71e Replace incomplete pvmove activation failure recovery code with a message.
As it stands, the recovery code can make things worse sometimes so it's
better to insist on a proper 'pvmove --abort' cleanup.
2011-09-27 17:29:33 +00:00
Alasdair Kergon
e63febe5ec Abort if _finish_pvmove suspend_lvs fails instead of cleaning up incompletely.
Change suspend_lvs to call vg_revert internally.
Change vg_revert to void and remove superfluous calls after failed vg_commit.
2011-09-27 17:09:42 +00:00
Zdenek Kabelac
57f1027a03 Use execvp for clvmd restart
Since execve passed only NULL as environ, we had lost all environment vars on
restart - thus actually running  'different' clvmd then the one at start.

Preserving environ allows to restart clvmd with the same settings
(i.e. LD_LIBRARY_PATH)

Add test for second restart.
2011-09-26 07:51:23 +00:00
Zdenek Kabelac
bd085674b2 Restart CLVMD with same cluster manager
Add named cluster_ops to easily learn the name of the active cluster manager,
so we are able to restart singlenode manager in testing.

Add simple test for clvmd -S  (restart) and -R (refresh)
(though it needs some extensions).
2011-09-25 19:37:00 +00:00
Zdenek Kabelac
71ee4b8d25 Fix log_error() usage
Cosmetic - skip <bactrace> when error has been just printed in raid segtype.
Add missing log_error if allocation would fail for unknown segtype.
2011-09-24 21:19:30 +00:00
Zdenek Kabelac
cc12990b2f Improvements
Simplify RUN_BASE

Put .tests-stamp deps only for check target and fix its cleanup.
Fix abs_top_srcdir.
vgimportclone needs  srcdir.
Clean  api subdir.
2011-09-24 21:10:19 +00:00
Zdenek Kabelac
a6791e34ba Fix install_ocf
When builddir is different from srcdir install_ocf: has not been able to find
files for installation.
2011-09-24 21:05:03 +00:00
Zdenek Kabelac
8ed5c47ce5 CLVMD support for LVM_CLVMD_BINARY and LVM_BINARY
Read 2 environmental vars to learn about overide position for
CLVMD and LVM binaries.

We support LVM_BINARY in other script - and this way we could easily
test restart in our test-suite.
2011-09-24 20:50:35 +00:00
Zdenek Kabelac
9c2095311e CLVMD bugfix support for args -S -E
Bugfix:
Add (most probably unfinished) support for -E arg with list of exclusive
locks.  (During clvmd restart all exclusive locks would have been lost and
in fact, if there would have been an exclusive lock, usage text would be
printed and clvmd exits.)

Instead of parsing list options multiple times every time some lock UUID is
checked - put them straight into the hash table - make the code easier to
understand as well.

Remove  was_ex_lock() function (replaced with dm_hash_lookup()).

Swap return value for get_initial_state() (1 means success).

Update man pages and usage info for -E option.
2011-09-24 20:48:34 +00:00
Jonathan Earl Brassow
c6e1353c4d Add 'Volume Type' lv_attr characters for RAID and RAID_IMAGE.
RAID_META is already handled.
2011-09-23 15:17:54 +00:00
Peter Rajnoha
ef2a81b860 Add activation/retry_deactivation to lvm.conf to retry deactivation of an LV. 2011-09-22 17:39:56 +00:00
Peter Rajnoha
638409a573 Replace open_count check with holders/mounted_fs check on lvremove path.
Before, we used to display "Can't remove open logical volume" which was
generic. There 3 possibilities of how a device could be opened:
  - used by another device
  - having a filesystem on that device which is mounted
  - opened directly by an application

With the help of sysfs info, we can distinguish the first two situations.
The third one will be subject to "remove retry" logic - if it's opened
quickly (e.g. a parallel scan from within a udev rule run), this will
finish quickly and we can remove it once it has finished. If it's a
legitimate application that keeps the device opened, we'll do our best
to remove the device, but we will fail finally after a few retries.
2011-09-22 17:33:50 +00:00
Jonathan Earl Brassow
1d251c85da Disallow the creation of mirrors (mirror or raid1 segtype) with only one leg.
If you specify the segment type (e.g. --type mirror) and the mirrors argument
as zero, it would result in a mirrored LV with only one image.  While the device
may be valid in theory, it should not be allowed in practice.  It also makes it
difficult on the conversion tools, since they react badly to single-image
mirrors.
2011-09-22 15:36:21 +00:00
Zdenek Kabelac
9cd366bf2b Clvmd restart cleanup
Patch fixes Clang warnings about possible access via lv_name NULL pointer.

Replaces allocation of memory (strdup) with just pointer assignment
(since execve is being called anyway).

Checks for  !*lv_name only when lv_name is defined.
(and as I'm not quite sure what state this really is - putting a FIXME
around - as this rather looks suspicios ??).

Add debug print of passed clvmd args.
2011-09-22 09:47:34 +00:00
Zdenek Kabelac
d283be0597 Add all exclusive locks to clvmd restart option args
Fix bug when only every even lock has been passed.

Warning: currently -E causes clvmd to exit with usage text being printed.
2011-09-22 09:45:24 +00:00
Milan Broz
c7ea2c24f8 Always sent the whole command header in restart/reload clvmd commands.
(Newly added check catch this as invalid packet.)

(N.B. that code is so fragile that it need full rewrite soon:-)
2011-09-21 13:40:46 +00:00
Zdenek Kabelac
a456d3c77f Check for failing 'stat' and skip this loop iteration
(since data in statbuf are invalid).

Check whether sysconf managed to find _SC_PAGESIZE.

Report at least debug warning about failing unlink
(logging scheme here seems to be a different then in lvm).

Duplicate terminal FDs and use similar code as is made in clvmd
and cleanup warns about missing open/close tests.
FIXME: Looks like we already have 3 instancies of the same code in lvm repo.
2011-09-21 10:42:53 +00:00
Zdenek Kabelac
1a82ef4386 Add missing log_error() to lvresize command when fsadm tool fails
Also add test case
2011-09-21 10:39:47 +00:00
Zdenek Kabelac
1c088b0a2b Add support for DM_DEV_DIR
Follow other commands support this directory setting.
Useful for test suite.
2011-09-19 19:36:52 +00:00
Zdenek Kabelac
cc8b9dd973 Revert patch
Caller of exec must report log_error when rstatus is passed.
2011-09-19 18:38:43 +00:00
Zdenek Kabelac
7b3831d001 Use log_error instead of log_verbose when executed command fails 2011-09-19 14:54:23 +00:00
Zdenek Kabelac
c110bc0154 Add support for non /dev devices
Since test suite is not using /dev - add support for such dirs into fsadm.
2011-09-19 14:52:33 +00:00
Zdenek Kabelac
304c544ce5 Support different PATH setting
When fsadm is test - it needs to execute lvm and fsadm from non-standard path
setting.   So adding a support in fsadm script when user set LVM_BINARY, then
the lvm command invoced from fsadm will have the same PATH setting as before
entering  fsadm command.

Needed for testing.
2011-09-19 13:51:09 +00:00
Zdenek Kabelac
9ee3f61aee Surround all executed commands with quotes
In case someone would use filename paths with spaces when changing
this script surround commands with '"'.

With default settings there is no change in behavior.
2011-09-19 13:47:37 +00:00
Zdenek Kabelac
ff9808505b Fix missing '$' in test 2011-09-19 13:43:50 +00:00
Zdenek Kabelac
1207e7a5b1 Move debug message
so it does not look like we are executing command in the middle of
critical_section in log trace.
2011-09-19 12:48:02 +00:00
Milan Broz
747060fe19 Fix clvmd processing of invalid request on local socket. (rommer)
Code now detects small packet and wrong arglen and reply with
error intead of infinite loop.

https://bugzilla.redhat.com/show_bug.cgi?id=738484
2011-09-16 14:40:06 +00:00
Zdenek Kabelac
75394455bc Fix command line option decoding
LVM has huge set of options now - it's approaching 60 short-arg less options
and we get interesting case of misdetection for 'merge' option which has been
put into the middle of options with 'short_arg' - thus certainly past 65. (ASCII 'A').

To avoid confusion of short_arg with long_opt number - add  '128' to all such
non-short-arg options.
2011-09-16 12:10:02 +00:00
Zdenek Kabelac
b565cb3503 Update 2011-09-16 12:01:48 +00:00
Petr Rockai
adc43e35d3 Update WHATS_NEW. 2011-09-16 10:02:14 +00:00
Petr Rockai
396ebcef66 Update WHATS_NEW. 2011-09-15 20:01:21 +00:00
Milan Broz
34d290b424 Fix possible overflow of size if %FREE or %VG is used.
https://bugzilla.redhat.com/show_bug.cgi?id=737087
2011-09-15 15:26:40 +00:00
Milan Broz
8d1a933b76 Fix vgchange activation of snapshot with virtual origin. 2011-09-14 18:20:03 +00:00
Milan Broz
d9f3c324e6 Activate virtual snapshot origin exclusively (only on local node in cluster). 2011-09-14 14:20:16 +00:00
Zdenek Kabelac
3bb7050e14 LVM_WRITE and LVM_READ are 64bit constants
Revert John patch, which fixed only 1 place where ~LVM_WRITE was in use and
convert ommited LVM_READ/WRITE flags to 64bit constants as well.
(Since both 'status' flags for LV and VG are 64bit.)
2011-09-14 09:57:35 +00:00
Jonathan Earl Brassow
2c9cf3b73b Fix for bug 734252 - problem up converting striped mirror after image failure
lv_mirror_count was not able to handle mirrors of stripes properly.  When a
failed device is removed, the MIRRORED status flag is removed from the LV
conditionally based on the results of lv_mirror_count.  However, lv_mirror_count
trusted the MIRRORED flag - thinking any such LV must be mirrored.  It would
happily assign first_seg(lv)->area_count as the number of mirrors, but when
a mirrored striped LV was reduced to a simple striped LV area_count would be
the number of /stripes/ not the number of /mirrors/.  A result higher than 1
would be returned from lv_mirror_count, the MIRRORED flag would not be cleared,
and the LV would fail to be up-converted properly in lvconvert_mirrors_aux
because of it.
2011-09-14 02:45:36 +00:00
Jonathan Earl Brassow
eb0af241f1 Fix bug 733400 - Mirror down conversion when specifying the secondary leg is broke
The operation of deactivating the residual error target LV after removing a
mirror layer can cause a "device in-use" conflict with udev.  Giving udev a
poke before calling deactivate_lv eliminates the conflict.  The stick used
to poke udev is 'sync_local_dev_names'.
2011-09-13 21:13:33 +00:00
Jonathan Earl Brassow
39feace42e Fix for bug 737200 - Can't create mirrored-log mirror on a VG with small extents
Kernel requires a mirror to be at least 1 region large.  So,
if our mirror log is itself a mirror, it must be at least
1 region large.  This restriction may not be necessary for
non-mirrored logs, but we apply the rule anyway.

(The other option is to make the region size of the log
mirror smaller than the mirror it is acting as a log for,
but that really complicates things.  It's much easier to
keep the region_size the same for both.)
2011-09-13 18:42:57 +00:00
Jonathan Earl Brassow
d954a7f991 Changing RAID status flags to 64-bit broke some binary flag operations.
LVM_WRITE is a 32-bit flag.  Now that RAID[_IMAGE|_META] are 64-bit,
and'ing a RAID LV's status against LVM_WRITE can reset the higher order
flags.

A similar thing will affect thinp flags if not careful.
2011-09-13 16:33:21 +00:00
Jonathan Earl Brassow
bfd774a20a Fix for bug 737125 - unable to create mirror on 1K extent size VG
_alloc_init calculates the number of necessary log extents via
'mirror_log_extents'.  'mirror_log_extents' takes 3 arguments: region_size,
pe_size, and size of the mirror LV.  Unfortunately, _alloc_init is guessing at
the mirror size by using 'ah->new_extents / ah->area_multiple' - the number of
extents that the mirror images have.  However, this is /always/ wrong when
allocating the log separately.  Further, the log is always allocated separately
unless we are up-converting the mirror at the same time.  It was by luck alone
that a default value of '1' reflects what we want in most cases.

In order to get a decent value computed, we need to pass in the 'lv' argument
to allocate_extents.  This would normally imply a desire for cling/contiguous
allocation to the given LV, but since we are not allocating any parallel
extents and only log extents, it works fine.
2011-09-13 14:37:48 +00:00
Jonathan Earl Brassow
7d8e615c0b Fix for bug 733114.
When an image is split from a 2-way mirror, the original mirror is converted to
a linear device.  To do this, the top "layer" must be removed.  The segments
are transferred from the sub-lv to the top-level LV and the link is severed.
The former sub-lv - having its segments transferred - now contains a temporary
error target.

When the original LV is resumed, the old sub-lv that now contains an error
segment is activated and scanned.  This is what causes the I/O error messages.
There are three ways to fix this problem:

1) Do not set the sub-lv which contains the error target as "visible" before
suspending the original LV.  This way, when the original is resumed, the sub-lv
device node is not created and it is not scanned - avoiding the error messages.
 The problem with this approach is that if the machine crashes after the
resume, it leaves the *hidden* LV in place and the user has a more difficult
time noticing that it needs to be cleaned up.  Thus, this type of processing is
frowned upon.

2) Do like _remove_mirror_images does and suspend the original, then suspend
the sub-lv (the error target), then resume the sub-lv, and finally resume the
original LV.  This seems like extra pointless operations to me, but it does not
produce the error message (although, I'm not sure why) and it allows us to
leave the visible flag in place.

3) Flag the sub-lv (error target) with a "do not scan" flag.  This seems like
the cleanest approach, but I have been unable to find the method for doing
this.  LVs get tagged in such a way by _get_udev_flags, but in this case the
resume of the original LV also resumes the error target LV without running it
through _get_udev_flags (likely because they are no longer linked).  Could
there be something wrong in resume_lv?

Option #2 was chosen to fix this bug, but it seems like more of a workaround
for now.
2011-09-13 13:59:19 +00:00
Alasdair Kergon
a083187168 Add 7th lv_attr char to show the related kernel target.
Add thin volume types to lv_attr.
2011-09-08 20:55:39 +00:00
Alasdair Kergon
ad67fb4b73 Terminate pv_attr field correctly. (2.02.86) 2011-09-07 13:42:00 +00:00
Zdenek Kabelac
e6273046f4 Fix typo 2011-09-07 09:48:49 +00:00
Zdenek Kabelac
58da345e4e Improve man page style
Only reformat man pages.
2011-09-07 08:50:35 +00:00
Zdenek Kabelac
8ff2e245ac Support break for vgchange and vgrefresh operation
Allow to break some lengthy vgchange and vgrefresh operation.
2011-09-07 08:41:47 +00:00
Zdenek Kabelac
d05c996d48 Minor change for pv_create api
Switch int to unsigned type.
2011-09-07 08:34:21 +00:00
Zdenek Kabelac
867e4cfffb Replace char class :space: with explicit chars
Some major distributions are still using 'mawk' and they are not using
the latest version - we end here with hidden dependency on the latest
version of mawk (1.3.4) while i.e. Debian Lenny seems to stay with 1.3.3.
So we end with completely broken  vgimportclone script on such system.

We would need to check for proper support of :space: and abort build if
it doesn't work or simplier replace [:space:] with [ \t] which seems
sufficient to make it work (as can be seen in this patch)

A better fix would be to use command line parameter override - leaving
as FIXME comment.

This patch makes t-vgimportclone.sh test passing on Lenny.
2011-09-07 08:31:16 +00:00
Alasdair Kergon
d19192b20e Start using 64-bit status flags - most of the code already handles them.
tdata -> tpool
remove commented out definitions from metadata.h
formatting clean-ups
2011-09-06 18:49:31 +00:00
Zdenek Kabelac
054c6c890a Detect sscanf recovering_region input error
Missing check for sscanf found by static analyzer.
2011-09-06 18:24:27 +00:00
Zdenek Kabelac
ebb39e1041 Fix memory leak of allocated bitmap in error path
Found by static analyzer.
2011-09-06 18:15:43 +00:00
Zdenek Kabelac
c5120c1a7a Log unlink() error 2011-09-06 18:11:21 +00:00
Alasdair Kergon
096dbb58f9 Remove incorrect requirement for -j or -m from lvchange error message. 2011-09-05 12:54:29 +00:00
Jonathan Earl Brassow
9ab111abc0 Fix for bug 732142: Unsafe table load during mirror image split
There was a bad sequence:
*) Make changes to LV layout to split images (e.g. 4-way -> 2-way/2-way)
1) vg_write, suspend_lv(original_mirror), vg_commit
2) activate_lv(newly_split_lv)
3) resume_lv(original_mirror)

Step #2 is not allowed.  However, without it, the resume of the original
mirror will also resume its former sub-LVs - making it impossible to
activate the newly split LV due to the changes in layering, pointers, and
names that had already been made.  Additionally, the resume or the original
brings the sub-lv's online with names that differ from the metadata on disk -
also a no-no.  Thus, the split must be done in stages such that the active LVs
always reflect what is in the committed LVM metadata.

First, alter the original mirror by releasing the images.  The images are made
visible and independent as an intermediate stage.  (This way, we can have
consistency between LVM metadata and active LVs.)  The second stage collects
the recently split LVs, deactivates them, forms them into a mirror if necessary,
and then activates them.  It is a bit of a circuitous method, but it is the only
way to split a mirror from a mirror and obey these general rules:
1) Never [de]activate sub-lvs when the top-level LV is suspended
2) Avoid having active LVs that differ from the description in the LVM metadata

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
2011-09-01 19:22:11 +00:00
Zdenek Kabelac
b90e9912f1 Use size_t return type
Since these function returns buffer size - use size_t type for them.
2011-09-01 10:25:22 +00:00
Petr Rockai
4c76c264dc Mention --enable-lvmetad in WHATS_NEW. 2011-08-31 12:47:59 +00:00
Zdenek Kabelac
731c45ff37 Update for resource leak 2011-08-31 08:23:33 +00:00
Peter Rajnoha
4020e6db24 Directly allocate buffer memory in a pvck scan instead of using a mempool.
There's a very high memory usage when calling _pv_analyse_mda_raw (e.g. while
executing pvck) that can end up with "out of memory".

_pv_analyse_mda_raw scans for metadata in the MDA, iteratively increasing the
size to scan with SECTOR_SIZE until we find a probable config section or we're
at the edge of the metadata area. However, when using a memory pool, we're also
iteratively chasing for bigger and bigger mempool chunk which can't be found
and so we're always allocating a new one, consuming more and more memory...

This patch just changes the mempool to direct memory allocation in this
problematic part of the code.
2011-08-29 13:37:36 +00:00
Alasdair Kergon
fbacf137f2 Fix raid shared lib segtype registration (2.02.87). 2011-08-24 13:41:46 +00:00
Alasdair Kergon
0064f3a9a8 . 2011-08-19 23:01:20 +00:00
Alasdair Kergon
4c503ee2a6 post-release 2011-08-19 19:42:39 +00:00
Alasdair Kergon
ab52d127bb pre-release 2011-08-19 16:31:00 +00:00
Alasdair Kergon
735254fba4 _ for static fns 2011-08-19 15:59:15 +00:00
Jonathan Earl Brassow
b87604e649 Add ability to merge back a RAID1 image that has been split w/ --trackchanges
Argument layout is very similar to the merge command for snapshots.
2011-08-18 19:43:08 +00:00
Jonathan Earl Brassow
4fad401cd2 Add support for m-way to n-way up-convert in RAID1 (no linear to n-way yet)
This patch adds the ability to upconvert a raid1 array - say from 2-way to
3-way.  It does not yet support upconverting linear to n-way.

The 'raid' device-mapper target allows for individual components (images) of
an array to be specified for rebuild.  This mechanism is used when adding
new images to the array so that the new images can be resync'ed while the
rest of the images in the array can remain 'in-sync'.  (There is no
mirror-on-mirror layering required.)
2011-08-18 19:41:21 +00:00
Jonathan Earl Brassow
cc00073da7 Add the ability to split an image from the mirror and track changes.
~> lvconvert --splitmirrors 1 --trackchanges vg/lv
The '--trackchanges' option allows a user the ability to use an image of
a RAID1 array for the purposes of temporary read-only access.  The image
can be merged back into the array at a later time and only the blocks that
have changed in the array since the split will be resync'ed.  This
operation can be thought of as a partial split.  The image is never completely
extracted from the array, in that the array reserves the position the device
occupied and tracks the differences between the array and the split image via
a bitmap.  The image itself is rendered read-only and the name (<LV>_rimage_*)
cannot be changed.  The user can complete the split (permanently splitting the
image from the array) by re-issuing the 'lvconvert' command without the
'--trackchanges' argument and specifying the '--name' argument.
	~> lvconvert --splitmirrors 1 --name my_split vg/lv
Merging the tracked image back into the array is done with the '--merge'
option (included in a follow-on patch).
	~> lvconvert --merge vg/lv_rimage_<n>

The internal mechanics of this are relatively simple.  The 'raid' device-
mapper target allows for the specification of an empty slot in an array
via '- -'.  This is what will be used if a partial activation of an array
is ever required.  (It would also be possible to use 'error' targets in
place of the '- -'.)  If a RAID image is found to be both read-only and
visible, then it is considered separate from the array and '- -' is used
to hold it's position in the array.  So, all that needs to be done to
temporarily split an image from the array /and/ cause the kernel target's
bitmap to track (aka "mark") changes made is to make the specified image
visible and read-only.  To merge the device back into the array, the image
needs to be returned to the read/write state of the top-level LV and made
invisible.
2011-08-18 19:38:26 +00:00
Jonathan Earl Brassow
bd1f90fd60 Add --splitmirrors support for RAID1 (1 image only)
Users already have the ability to split an image from an LV of "mirror"
segtype.  This patch extends that ability to LVs of "raid1" segtype.

This patch only allows a single image to be split off, however.  (The
"mirror" segtype allows an arbitrary number of images to be split off.
e.g.  4-way => 3-way/linear, 2-way/2-way, linear,3-way)
2011-08-18 19:34:18 +00:00
Jonathan Earl Brassow
7058ed4431 When down-converting RAID1, don't activate sub-lvs between suspend/resume
of top-level LV.

We can't activate sub-lv's that are being removed from a RAID1 LV while it
is suspended.  However, this is what was being used to have them show-up
so we could remove them.  'sync_local_dev_names' is a sufficient and
proper replacement and can be done after the top-level LV is resumed.
2011-08-18 19:31:33 +00:00
Alasdair Kergon
4332bb3951 Add -V as short form of --virtualsize in lvcreate. 2011-08-17 15:15:36 +00:00
Alasdair Kergon
3bb841dfa1 makefile fixes 2011-08-12 13:03:35 +00:00
Alasdair Kergon
927e33104a post-release 2011-08-12 02:34:08 +00:00
Alasdair Kergon
5fd6065e99 pre-release 2011-08-12 01:34:11 +00:00
Alasdair Kergon
9a9dde2d8c pre-release fixes incl make distclean and configure --with-raid=none/shared 2011-08-11 19:18:17 +00:00
Jonathan Earl Brassow
219b1d015b Add ability to down-convert RAID1 arrays.
Also, add some simple RAID tests to testsuite.
2011-08-11 18:24:40 +00:00
Zdenek Kabelac
0e29db4a51 Update udev rules to skip DM flags decoding for removed devices
Skip decoding of DM flags when device is removed.

We currently need DM flags only for add|change events. So forking
dmsetup process for removed devices is a waste of CPU time.

Udev is already quite slow, so make it just a tiny bit faster.
2011-08-11 17:55:29 +00:00
Zdenek Kabelac
fff1723b6f Add detect_internal_vg_cache_corruption to lvm.conf
Add config option to enable crc checking of VG structures.
Currently it's disabled by default.

For the internal test-suite this check it is enabled.

Note: In the case the internal error is detected, debug build with
compile option DEBUG_ENFORCE_POOL_LOCKING helps to catch the source
of the problem.
2011-08-11 17:46:13 +00:00
Zdenek Kabelac
93cecfbfb6 Lock memory for shared VG
Use debug pool locking functionality. So the command could check,
whether the memory in the pool has not been modified.

For lv_postoder() instead of unlocking and locking for every changed
struct status member do it once when entering and leaving function.
(mprotect would trap each such memory access).
Currently lv_postoder() does not modify other part of vg structure
then status flags of each LV with flags that are reverted back to
its original state after function exit.
2011-08-11 17:34:30 +00:00
Zdenek Kabelac
7ad0d47c3c Cache and share generated VG structs
Extend vginfo cache with cached VG structure. So if the same metadata
are use, skip mda decoding in the case, the same data are in use.
This helps for operations like activation of all LVs in one VG,
where same data were decoded giving the same output result.

Patch adds 1-to-1 connection between volume_group and lvmcache_vginfo.
2011-08-11 17:24:23 +00:00
Peter Rajnoha
25f72cfd07 Fix possible format instance memory leaks and premature releases in _vg_read. 2011-08-11 16:31:40 +00:00
Peter Rajnoha
0390acff8c Suppress locking error messages in monitoring init scripts. 2011-08-11 15:27:46 +00:00
Milan Broz
48aa36a654 Never ever use uninitialised descriptors if pipe() fails
(because of maximum open count fd exceeded or so).

Better return busy message, so even clients fail in more controlled way.

Without patch,  clvmd crashes with various strange backtraces
if under heavy load of connection requests.

https://bugzilla.redhat.com/show_bug.cgi?id=698393
https://bugzilla.redhat.com/show_bug.cgi?id=697945

(It still can OOM but that's different issue.)
2011-08-11 12:57:10 +00:00
Jonathan Earl Brassow
9c3fd6948b Add dmeventd monitoring for RAID devices. 2011-08-11 05:00:20 +00:00
Jonathan Earl Brassow
c65ebf3e70 Add RAID metadata devices to considered devices in _add_lv_to_dtree.
_add_lv_to_dtree must also add RAID metadata devices.
2011-08-11 04:18:17 +00:00
Jonathan Earl Brassow
430335e24e Fix renaming of RAID logical volumes.
The function 'for_each_sub_lv', which rename uses, was not handling the
RAID metadata areas.  Thus, the metadata LVs were not being renamed.
2011-08-11 03:29:51 +00:00