IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Avoid printing lvm2 command trace, if the test finds the 'dmeventd'
was started unxpectedly during testing as the last command is hardly
ever responsible for this
Also reorder some messages when doing teardown of devices.
Do not print 'help' message from hostname command, when it does
not support option '-I'.
Add check for 'leaked' symlinks after test and trap
the case when some 'danglink' links are present.
This might be some problem with udev synchronization
or some other strange race.
All such symlinks will be also removed so they will not
influence following tests.
The df -a looks at whole system and it returns an error code in case
there's an inaccessible fs which is not even part of the testing environment.
The -a for df is not actually needed here in the lvresize-xfs test, so remove it.
With commit acbeaa7a8d we started
to use symlinks to link test suite shell scripts, however
they remained within CLEAN_TARGETS.
So when running 'make clean' within non-srcdir build dir, we
were cleaning actuall shell script in this dir.
So remove list of this script from CLEAN_TARGETS in this case.
Avoid config 'grep' with actual 'randomly' generated path name
which may eventually contain 'cc' as part the path and
causing a mismatch of the grep test.
Tricky one - as the pipe exit codes may result into whole
test failure depending on how quick/slow command exits
are within pipeline.
So get the len without piping.
Avoid possible udev race - since dmsetup create is
not using the same cookie logic as lvm2 commands,
try to avoid racing on some systems with udev scanning.
The option can be used in multiple ways (like --cachesettings):
--integritysettings key=val
--integritysettings 'key1=val1 key2=val2'
--integritysettings key1=val1 --integritysettings key2=val2
Use with lvcreate or lvconvert when integrity is first enabled
to configure:
journal_sectors
journal_watermark
commit_time
bitmap_flush_interval
allow_discards
Use with lvchange to configure (only while inactive):
journal_watermark
commit_time
bitmap_flush_interval
allow_discards
lvchange --integritysettings "" clears any previously configured
settings, so dm-integrity will use its own defaults.
lvs -a -o integritysettings displays configured settings.
Calculates expected size before/after reshapes adding/removing stripes
to/from RaidLVs with levels 4/5/6/10 and compares it with the actual
one the block layer shows. Stripes reshaped to are listed in the
tst_stripes variable. mkfs/fsck/resize2fs the respective RaidLVs
to confirm ext4 can be resized accordingly without issues.
SUSE kernels distribution enables CONFIG_PRINTK_CALLER by default.
One line of cat /dev/kmsg is like:
6,904,9506214456,-,caller=T24012;loop8: detected capacity change from 0
to 354304
If CONFIG_PRINTK_CALLER is off:
6,721,53563833,-;loop0: detected capacity change from 0 to 354304
',caller=T24012' is the redundant part needed to be handled.
Otherwise pos will be lager than buf size causing sz underflowed.
Then constructor of std::string will throw a exception to break
tests:
$ make check_local T=shell/000-basic.sh
VERBOSE=0 ./lib/runner \
--testdir . --outdir results \
--flavours ndev-vanilla --only shell/000-basic.sh --skip @
running 1 tests
running: [ndev-vanilla] shell/000-basic.sh
0:00.000Exception: basic_string::_M_create
make[1]: *** [Makefile:148: check_local] Error 1
make[1]: Leaving directory '/root/lvm2/test'
make: *** [Makefile:89: check_local] Error 2
Fix it with strchr for ';' as delimiter to get pos.
Reported-by: Su Yue <glass.su@suse.com>
Instead of using 'key state & key end' uint8_t* switch to use
void* key, & size_t keylen. This allows easier adaptation with
lvm code base with way too much casting with every use of function.
Also correctly mark const buffers to avoid compiled warnings and
casting.
Adapt the only bcache user ATM for API change.
Adapt unit test to match changed API.
When PVs are created on LVs, remove the devices file entries
for the PVs when the LVs are removed. In general, the devices
file entries should be removed with lvmdevices --deldev when
the LVs are removed (lvremove is the equivalent of detaching
a device from the system when layering PVs on LVs.)
This change is effectively an automatic lvmdevices --deldev
command that is built into lvremove when the LV has a PV on it.
lvm2 for a while already optimizes 'vgremove' operation to
a single commit when possible if all LVs can be
easily deactivated.
So the number of LVs doesn't matter much - but the tested
case 'test_delete_non_complete_job' seems to be taking
some time anyway to capture the exception.
So just reducing the running time of the test significatanly
as we don't need to create 64LVs for 4 'execution mode' runs.
