IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When command is not using lvmetad because
use_lvmetad=0 in the config, but the lvmetad
pidfile exists, print a warning (previously
this checked for the socket existing instead
of the pidfile existing.)
The lvmetad connection is created within the
init_connections() path during command startup,
rather than via the old lvmetad_active() check.
The old lvmetad_active() checks are replaced
with lvmetad_used() which is a simple check that
tests if the command is using/connected to lvmetad.
The old lvmetad_set_active(cmd, 0) calls, which
stopped the command from using lvmetad (to revert to
disk scanning), are replaced with lvmetad_make_unused(cmd).
After a device rescan that repopulates lvmetad,
if no reason for disabling lvmetad was seen
(lvm1 metadata or duplicate PVs), then clear
the disabled flag in lvmetad. This allows
commands to resume using the lvmetad cache
after the cause for disabling it has been removed.
Commands already check if the lvmetad token is valid,
and if not, they rescan devices to repopulate lvmetad
before running. Now, in addition to checking the
lvmetad token, they also check if the lvmetad disabled
flag is set. If so, they do not use the lvmetad cache
and revert to disk scanning.
A global flag in lvmetad indicates it has been disabled.
Other flags indicate the reason it was disabled.
These flags can be queried using get_global_info.
The lvmetactl debugging utility can set and clear the
disabled flag in lvmetad. Nothing else sets the
disabled flag yet.
Commands will check these flags after connecting to
lvmetad. If the disabled flag is set, the command
will not use the lvmetad cache, but revert to disk
scanning.
To test this feature:
$ lvmetactl get_global_info
response = "OK"
global_invalid = 0
global_disable = 0
disable_reason = "none"
token = "filter:3041577944"
$ vgs
(should report VGs from lvmetad)
$ lvmetactl set_global_disable 1
$ lvmetactl get_global_info
response = "OK"
global_invalid = 0
global_disable = 1
disable_reason = "DIRECT"
token = "filter:3041577944"
$ vgs
WARNING: Not using lvmetad because the disable flag was set directly.
(should report VGs without contacting lvmetad)
$ lvmetactl set_global_disable 0
$ vgs
(should report VGs from lvmetad)
Move checking the lvmetad state, and the possible rescan,
out of lvmetad_send() to the start of the command.
Previously, the token mismatch and rescan would occur
within lvmetad_send() for some other request. Now,
the token mismatch is detected earlier, so the
rescan can be done before the main command is in
progress. Rescanning deep within the processing of
another command will disturb the lvmcache state of
that other command.
A rescan already exists at the start of the command
for the case where foreign VGs are going to be read.
This same rescan is now also performed when there is
an lvmetad token mismatch (from a changed global_filter).
The commands pvscan/vgscan/lvscan/vgimport are excluded
from this preemptive checking/rescanning for lvmetad
because they want to do rescanning themselves explicitly.
If rescanning devices fails, then lvmetad has not been
correctly repopulated and should not be used, so make
the command revert to not using lvmetad.
Since we already check in few other places 'info' is not NULL,
do the same for others - however when info would be NULL
it more or less looks like internal error.
When not using lvmetad, this uses the system_id field in
the cached vginfo structs that are populated during a scan.
When using lvmetad, this requests the VG from lvmetad, and
checks the system_id field in the returned metadata.
When the command already knows both the vgid and vgname,
it should send both to lvmetad for a more exact request,
and it can save lvmetad the work of a name lookup.
Use 'mda' instead of NULL to quite Coverity warn.
However this code seems to be actually not even possible to hit.
With proper analysis it may possibly be dropped from code to
simplify logic.
When the command gets a list of alternate devices
from lvmetad, log each one directly. This is not
the same as the warnings when adding lvmcache,
which are related to which duplicate is preferred.
If lvmlockd is running, lvmetad is configured (use_lvmetad=1),
but lvmetad is not running, then commands will seg fault
when trying to send a message to lvmetad.
The difference is lvmetad being "active", not just "used".
When lvmetad_pvscan_vg() reads VG metadata from each PV,
it compares it to the last one to verify it matches.
If the VG metadata does not match on the PVs, an error
is printed and it fails to read the VG. In this error
case, use log_debug to show the differences between
the two unmatching copies of the metadata.
One host changes a VG, making the cached VG on another
host invalid. The other host then rereads the VG from
disk to get the latest copy. If the first host removed
a PV from the VG, the second host attempts to reread the
VG from old PV when rescanning. Reading the VG from the
removed PV fails, causing vg_read to return "VG not found".
The fix is to simply not fail when a VG is not found while
rereading a PV and continue without it.
(This doesn't happen if the second host happens to first
run a command like 'vgs' that triggers a global revalidation
of metadata.)
The code was expecting the wrong return value from
compare_config, which returns 0 when equal.
This is a problem for a lockd VG using multiple PVs
when the VG needs to be rescanned.
Previously, a command would only rescan a lockd VG
when lvmetad returned the "vg_invalid" flag indicating
that the cached copy was invalid (which is done by
lvmlockd.) This is still the only usual reason for
rescanning a lockd VG, but two new special cases are
added where we also do the rescan:
. When the --shared option is used to display lockd VGs
from hosts not using lvmlockd. This is the same case
as using --foreign to display foreign VGs, but --shared
was missing the corresponding bits to rescan the VGs.
. When a lockd VG is allowed to be read for displaying
after failing to acquire the lock from lvmlockd. In
this case, the usual mechanism for validating the
cache is missed, so assume the cache would have been
invalidated. (This had been a previous todo item
that was lost during other cleanup.)
These were long-standing todos that were lost track of.
pvscan autoactivation does not work for lockd VGs because
lock start is needed on a lockd VG before locking can be
done for it. Add a check to skip the attempt at autoactivate
rather than calling it, knowing it will fail.
Add a comment explaining why pvscan --cache works fine for
lockd VGs without locks, and why autoactivate is not done.
Put the change from commit #10d27998b3d2f6100e9e29e83d1d99948c55875f
back so we have working tree again for now. This code needs a bit of
a cleanup to return proper return value to check...
lib/format1/import-export.c:167: var_deref_op: Dereferencing null pointer "vg->lvm1_system_id"
lib/cache/lvmetad.c:1023: var_deref_op: Dereferencing null pointer "this"
daemons/lvmlockd/lvmlockd-core.c:2659: check_after_deref: Null-checking "act" suggests that it may be null, but it has already been dereferenced on all paths leading to the check
/daemons/lvmetad/lvmetad-core.c:1024: check_after_deref: Null-checking "pvmeta" suggests that it may be null, but it has already been dereferenced on all paths leading to the check
This is the client side handling of the global_invalid state
added to lvmetad in commit c595b50cec8a6b95c6ac4988912d1412f3cc0237.
The function added here:
. checks if the global state in lvmetad is invalid
. if so, scans disks to update the state in lvmetad
. clears the global_invalid flag in lvmetad
. updates the local udev db to reflect any changes
and update the lvmetad copy after it is reread from disk.
This is the client side handling of the vg_invalid state
added to lvmetad in commit c595b50cec8a6b95c6ac4988912d1412f3cc0237.
lvmetad_init() should not be called with open connection to the daemon.
Doing so is considered to be an internall error within lvm2 code.
Such coincidence can't occur within current code. Let's assure us it won't
ever happen.
This is an alternative/equivalent to commit
ca67cf84df
The problem (wrong label->dev after a new preferred
duplicate device is chosen) was isolated to the lvmetad
case (non-lvmetad worked fine), and this fixes the problem
by setting the new label->dev in the lvmetad-specific
code rather than in the general lvmcache code.
In process_each_{vg,lv,pv} when no vgname args are given,
the first step is to get a list of all vgid/vgname on the
system. This is exactly what lvmetad returns from a
vg_list request. The current code is doing a vg_lookup
on each VG after the vg_list and populating lvmcache with
the info for each VG. These preliminary vg_lookup's are
unnecessary, because they will be done again when the
processing functions call vg_read. This patch eliminates
the initial round of vg_lookup's, which can roughly cut in
half the number of lvmetad requests and save a lot of extra work.
