1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

535 Commits

Author SHA1 Message Date
Zdenek Kabelac
b9fe52e811 cleanup: move comment 2013-03-13 15:13:50 +01:00
Zdenek Kabelac
293a06c39a cleanup: indent 2013-03-13 15:13:42 +01:00
Jonathan Brassow
ed6f3945fd clean-up: Typo 's/should had/should have/' 2013-03-06 08:42:03 -06:00
Peter Rajnoha
386886f71c config: refer to config nodes using assigned IDs
For example, the old call and reference:

  find_config_tree_str(cmd, "devices/dir", DEFAULT_DEV_DIR)

...now becomes:

  find_config_tree_str(cmd, devices_dir_CFG)

So we're referring to the named configuration ID instead
of passing the configuration path and the default value
is taken from central config definition in config_settings.h
automatically.
2013-03-06 10:14:33 +01:00
Zdenek Kabelac
71f4934500 activation: fix pvmove partial tree creation
Do not try to add LV again into the partial tree, if it's been
already added. Otherwise we may end in endless loop.
2013-02-23 12:09:12 +01:00
Zdenek Kabelac
b73de73151 thin: lvconvert support for external origin
Add basic support for converting LV into an external origin volume.

Syntax:

lvconvert --thinpool vg/pool  --originname renamed_origin -T origin

It will convert volume  'origin' into a thin volume, which will
use 'renamed_origin' as an external read-only origin.
All read/write into origin will go via 'pool'.

renamed_origin volume is read-only volume, that could be activated
only in read-only mode, and cannot be modified.
2013-02-23 10:38:20 +01:00
Zdenek Kabelac
87331dc419 thin: add support for external origin
Add internal support for thin volume's external origin.
2013-02-23 10:36:58 +01:00
Zdenek Kabelac
3679bb1cd9 activation: simplify activation code
Reorder activation code to look similar for preload tree and
activation tree.

Its also give much better suppport for device stacking,
since now we also support activation of snapshot which might
be then used for other devices.
2013-02-23 10:30:03 +01:00
Zdenek Kabelac
0631d233d8 activation: add _add_layer_target_to_dtree
Add function for creation of simple linear mapping over layer device.
2013-02-23 10:29:08 +01:00
Zdenek Kabelac
520cc9a7f8 thin: replace _thin_layer with lv_layer()
Use consitently lv_layer function internally for thin pool layer name.
2013-02-23 10:28:04 +01:00
Zdenek Kabelac
78b23f3595 activation: extend _cached_info
Add layer string to support check of layered devices.
2013-02-23 10:28:01 +01:00
Jonathan Brassow
f5cd9c3563 clean-up: Another functiont that can use 'lv_layer'
lib/activate/dev_manager.c:dev_manager_raid_status() can also use
the new 'lv_layer' function.
2013-02-04 17:10:16 -06:00
Zdenek Kabelac
a4870c79ca thin: use noflush for obtaining transaction_id
Do not flush thin pool data, when reading transation_id status.
2013-02-04 19:05:56 +01:00
Zdenek Kabelac
8ed0b6f312 thin: replace is_active with send_messages
Since is_active is only used for thinp
replace struct member with more meaningful
send_messages flag
2013-02-04 19:01:10 +01:00
Zdenek Kabelac
4af4241ba4 use lv_layer 2013-02-04 19:01:10 +01:00
Zdenek Kabelac
ca7abbce8a activate: add lv_layer function
Add function to return layer name for LV.
2013-02-04 19:01:10 +01:00
Zdenek Kabelac
9f433e6ee3 cleanup: postpone lv_is_thin_volume check
Code move to make it easier to follow and
call _add_dev_to_dtree() in the separate if() branch
for thin volumes.
2013-02-04 19:00:19 +01:00
Jonathan Brassow
37ffe6a13a RAID: Cache previous results of lv_raid_dev_health for future use
We can avoid many dev_manager (ioctl) calls by caching the results of
previous calls to lv_raid_dev_health.  Just considering the case where
'lvs -a' is called to get the attributes of a RAID LV and its sub-lvs,
this function would be called many times.  (It would be called at least
7 times for a 3-way RAID1 - once for the health of each sub-LV and once
for the health of the top-level LV.)  This is a good idea because the
sub-LVs are processed in groups along with their parent RAID LV and in
each case, it is the parent LV whose status will be queried.  Therefore,
there only needs to be one trip through dev_manager for each time the
group is processed.
2013-02-01 11:32:18 -06:00
Jonathan Brassow
c8242e5cf4 RAID: Add RAID status accessibility functions
Similar to the way thin* accesses its kernel status, we add a method
for RAID to grab the various values in its status output without the
higher levels (LVM) having to understand how to parse the output.
Added functions include:
        - lib/activate/dev_manager.c:dev_manager_raid_status()
          Pulls the status line from the kernel

        - libdm/libdm-deptree.c:dm_get_status_raid()
          Parses status line and puts components into dm_status_raid struct

        - lib/activate/activate.c:lv_raid_dev_health()
          Accesses dm_status_raid to deliver raid dev_health string

The new structure and functions can provide a more unified way to access
status information.  ('lv_raid_percent' could switch to using these
functions, for example.)
2013-02-01 11:31:47 -06:00
Alasdair G Kergon
06abb2dd4c logging: classify log_debug messages
Place most log_debug() messages into a class.
2013-01-07 22:30:29 +00:00
Zdenek Kabelac
ec49f07b0d mirrors: fix leak in device_is_usable mirror check
Function _ignore_blocked_mirror_devices was not release
allocated strings images_health and log_health.

In error paths it was also not releasing dm_task structure.

Swaped return code of _ignore_blocked_mirror_devices and
use 1 as success.

In _parse_mirror_status use log_error if memory allocation
fails and few more errors so they are no going unnoticed
as debug messages.

On error path always clear return values and free strings.

For dev_create_file  use cache mem pool to avoid memleak.
2012-12-11 11:15:22 +01:00
Peter Rajnoha
35a4d70aad activation: don't miss the log on empty {auto_activation|read_only|}_volume_list
Addendum to previous commit...
2012-12-04 14:12:36 +01:00
Peter Rajnoha
e2be2652ad Allow empty activation/{auto_activation|read_only|}_volume_list config option.
In case we don't want to activate, autoactivate or have the
VG/LV read-only. Primarily targeted for the auto_activation_volume_list,
but it makes no harm for other settings (the part of the code
that reads these three settings is shared, but there's no
reason to separate it only for this change).
2012-12-04 10:33:54 +01:00
Zdenek Kabelac
683b1f0625 thin: detect discards for non-power-2
Check if target supports discards for chunk sizes,
that are not power of 2 (just multiple of 64K),
and enable it in case it's supported by thin kernel target.
2012-11-26 12:14:47 +01:00
Jonathan Brassow
b248ba0a39 mirror: Avoid reading mirrors with failed devices in mirrored log
Commit 9fd7ac7d03 did not handle mirrors
that contained mirrored logs.  This is because the status line of the
mirror does not give an indication of the health of the mirrored log,
as you can see here:
        [root@bp-01 lvm2]# dmsetup status vg-lv vg-lv_mlog
        vg-lv: 0 409600 mirror 2 253:6 253:7 400/400 1 AA 3 disk 253:5 A
        vg-lv_mlog: 0 8192 mirror 2 253:3 253:4 7/8 1 AD 1 core
Thus, the possibility for LVM commands to hang still persists when mirror
have mirrored logs.  I discovered this while performing some testing that
does polling with 'pvs' while doing I/O and killing devices.  The 'pvs'
managed to get between the mirrored log device failure and the attempt
by dmeventd to repair it.  The result was a very nasty block in LVM
commands that is very difficult to remove - even for someone who knows
what is going on.  Thus, it is absolutely essential that the log of a
mirror be recursively checked for mirror devices which may be failed
as well.

Despite what the code comment says in the aforementioned commit...
+ * _mirrored_transient_status().  FIXME: It is unable to handle mirrors
+ * with mirrored logs because it does not have a way to get the status of
+ * the mirror that forms the log, which could be blocked.
... it is possible to get the status of the log because the log device
major/minor is given to us by the status output of the top-level mirror.
We can use that to query the log device for any DM status and see if it
is a mirror that needs to be bypassed.  This patch does just that and is
now able to avoid reading from mirrors that have failed devices in a
mirrored log.
2012-10-25 00:42:45 -05:00
Jonathan Brassow
9fd7ac7d03 mirror: Avoid reading from mirrors that have failed devices
Addresses: rhbz855398 (Allow VGs to be built on cluster mirrors),
           and other issues.

The LVM code attempts to avoid reading labels from devices that are
suspended to try to avoid situations that may cause the commands to
block indefinitely.  When scanning devices, 'ignore_suspended_devices'
can be set so the code (lib/activate/dev_manager.c:device_is_usable())
checks any DM devices it finds and avoids them if they are suspended.

The mirror target has an additional mechanism that can cause I/O to
be blocked.  If a device in a mirror fails, all I/O will be blocked
by the kernel until a new table (a linear target or a mirror with
replacement devices) is loaded.  The mirror indicates that this condition
has happened by marking a 'D' for the faulty device in its status
output.  This condition must also be checked by 'device_is_usable()' to
avoid the possibility of blocking LVM commands indefinitely due to an
attempt to read the blocked mirror for labels.

Until now, mirrors were avoided if the 'ignore_suspended_devices'
condition was set.  This check seemed to suggest, "if we are concerned
about suspended devices, then let's ignore mirrors altogether just
in case".  This is insufficient and doesn't solve any problems.  All
devices that are suspended are already avoided if
'ignore_suspended_devices' is set; and if a mirror is blocking because
of an error condition, it will block the LVM command regardless of the
setting of that variable.

Rather than avoiding mirrors whenever 'ignore_suspended_devices' is
set, this patch causes mirrors to be avoided whenever they are blocking
due to an error.  (As mentioned above, the case where a DM device is
suspended is already covered.)  This solves a number of issues that weren't
handled before.  For example, pvcreate (or any command that does a
pv_read or vg_read, which eventually call device_is_usable()) will be
protected from blocked mirrors regardless of how
'ignore_suspended_devices' is set.  Additionally, a mirror that is
neither suspended nor blocking is /allowed/ to be read regardless
of how 'ignore_suspended_devices' is set.  (The latter point being the
source of the fix for rhbz855398.)
2012-10-23 23:10:33 -05:00
Zdenek Kabelac
cf8e1a0093 thin: origin only suspend
Skip tree creating when used with origin_only flag.
2012-10-03 15:05:55 +02:00
Zdenek Kabelac
eb08f86521 cleanup: initilize percent to INVALID
Always initialize percent to INVALID value, in case target
would have forget to setup this value somehow.
2012-08-23 14:38:48 +02:00
Zdenek Kabelac
5d0e7fb4ed activation: report error message
If the monitoring activation failed and we have not yet
reported error - give the user error message for failure reason.
2012-08-23 14:38:48 +02:00
Zdenek Kabelac
fd417db274 check: add internal errors for unexpected paths
Adding couple INTERNAL_ERROR reports for unwanted parameters:

Ensure the 'top' metadata node cannot be NULL for lvmetad.

Make obvious vginfo2 cannot be NULL.

Report internal error if handler and vg is undefined.

Check for handle in poll_vg().

Ensure seg is not NULL in dev_manager_transient().

Report missing read_ahead for _lv_read_ahead_single().

Check for report handler in dm_report_object().

Check missing VG in _vgreduce_single().
2012-08-23 14:37:52 +02:00
Zdenek Kabelac
286cd2006b cleanup: drop unneeded included header files
This headers were not resolving anything used for compiled .c files.
Remove unused util.c file.
2012-08-23 14:37:20 +02:00
Alasdair G Kergon
701b4a8363 thin: use discards as plural rather than singular
Global change from --discard to --discards, as that feels more natural.
2012-08-07 21:24:41 +01:00
Alasdair G Kergon
0650a16a22 activation: log target version present
Log (very verbose) the target version present in target_version.
2012-08-07 18:47:33 +01:00
Zdenek Kabelac
260e8f2476 thin: detect supported features from thinp target
Add shell variable to override reported min version for testing:
LVM_THIN_VERSION_MIN
2012-07-18 14:35:17 +02:00
Peter Rajnoha
ec8f377748 cleanup: static volume filter fn, lvm.conf comment
Change 'lv_passes_volumes_filter' fn back to static as it's not
actually needed in the other code (a remnant from devel version).
Fix lvm.conf comment referencing '--autoactivate' which was finally
decided to be '--activate ay'.
2012-06-29 10:28:53 +02:00
Peter Rajnoha
95ced7a7be activate: add autoactivation hooks
Define an 'activation_handler' that gets called automatically on
PV appearance/disappearance while processing the lvmetad_pv_found
and lvmetad_pv_gone functions that are supposed to update the
lvmetad state based on PV availability state. For now, the actual
support is for PV appearance only, leaving room for PV disappearance
support as well (which is a more complex problem to solve as this
needs to count with possible device stack).

Add a new activation change mode - CHANGE_AAY exposed as
'--activate ay/-aay' argument ('activate automatically').

Factor out the vgchange activation functionality for use in other
tools (like pvscan...).
2012-06-28 09:42:47 -04:00
Zdenek Kabelac
2f99e5e35a Sync filesystem for thin snapshots
Add missing lockfs option when suspend origin, before thin volume
snapshot is created
2012-06-15 14:43:07 +02:00
Alasdair Kergon
56d49cbf13 Re-enable partial activation of non-thin LVs until it can be fixed. (2.02.90)
- The test should be checking the LV as a whole, not just individual segments.
2012-05-16 12:50:14 +00:00
Alasdair Kergon
067184f32d Handle replacement of an active device that goes missing with an error device.
(E.g. lvchange --refresh --partial on striped LV if a PV disappeared.)
2012-04-24 00:51:26 +00:00
Jonathan Earl Brassow
c62f9f0b2f Unlike 'mirror' segtype, 'raid1' should perform flush on suspend.
The 'mirror' segtype and 'raid1' segtype both set the 'MIRRORED' flag.
However, due to differences in the way these device-mapper targets behave
'mirror' must be suspended with the 'noflush' option and 'raid1' does not
have to be.

This patch ensures that when the 'MIRRORED' flag is checked to see if
'noflush' is needed that it does not also set it for 'raid1' by mistake.
2012-04-20 14:17:44 +00:00
Zdenek Kabelac
2caa558e7c Update and fix monitoring of thin pool devices
Code adds better support for monitoring of thin pool devices.
update_pool_lv uses DMEVENTD_MONITOR_IGNORE to not manipulate with monitoring.
vgchange & lvchange are checking real thin pool device for existance
as we are using   _tpool  real device and visible LV pool device might not
be even active (_tpool is activated implicitely for any thin volume).
monitor_dev_for_events is another _lv_postorder like code it might be worth
to think about reusing it here - for now update the code to properly
monitory thin volume deps.
For unmonitoring add extra code to check the usage of thin pool - in case it's in use
unmonitoring of thin volume is skipped.
2012-03-23 09:58:04 +00:00
Zdenek Kabelac
e866931169 Improve thin_check option passing
Update a way we handle option passing - so we now support path and options
with space inside.
Fix dm name usage for thin pools with '-' in name.
Use new lvm.conf option thin_check_options to pass in options as string array.
2012-03-14 17:12:05 +00:00
Zdenek Kabelac
aeaec150c0 Some more missing supposedly 64bit operations.
Avoid use 32bit math for extent_size.
2012-03-05 15:05:24 +00:00
Zdenek Kabelac
975b5b42d2 Improve warning
Use thin_dump --repair suggestion in log error message
and use just warning on  deactivation path without repair info
(since node has been deactivated).

Also check whether there is not 16 args for thin_check configured.
2012-03-05 14:15:50 +00:00
Zdenek Kabelac
6c7a6c07ee Add support for thin check
Use libdm callback to execute thin_check before activation
thin pool and after deactivation as well.

Supporting thin_check_executable which may pass in extra options for
the tool.
2012-03-02 21:49:43 +00:00
Zdenek Kabelac
fbf6b89a84 Using enum types for enums
alloc_policy_t, dm_string_mangling_t, percent_range_t, sign_t
2012-02-28 14:24:57 +00:00
Zdenek Kabelac
499a161640 Use const for lv
lv_is_active doesn't needs modifiable LV struct so keep it const.

Remove lv_send_message() left bits from code -
they were never released in 2.02.89.
2012-02-23 22:41:57 +00:00
Petr Rockai
dae0822698 The lvmetad client-side integration. Only active when use_lvmetad = 1 is set in
lvm.conf *and* lvmetad is running.
2012-02-23 13:11:07 +00:00
Jonathan Earl Brassow
a30832cedd Fix bug that caused RAID devices to be unable to activate if sub-LV was missing.
Commit 02f6f4902f introduced a bug that caused
RAID devices to fail to activate if the device for a single sub-LV failed.
The special case of LVM mirror was handled, but not LVM RAID.
EXAMPLE:
[root@bp-01 ~]# devices vg
  LV            Copy%  Devices
  lv            100.00 lv_rimage_0(0),lv_rimage_1(0)
  [lv_rimage_0]        /dev/sde1(1)
  [lv_rimage_1]        /dev/sdh1(1)
  [lv_rmeta_0]         /dev/sde1(0)
  [lv_rmeta_1]         /dev/sdh1(0)
[root@bp-01 ~]# vgchange -an vg
  0 logical volume(s) in volume group "vg" now active
[root@bp-01 ~]# off.sh sdh
Turning off sdh
[root@bp-01 ~]# vgchange -ay vg --partial
  Partial mode. Incomplete logical volumes will be processed.
  Couldn't find device with uuid fbI0YO-GX7x-firU-Vy5o-vzwx-vAKZ-feRxfF.
  Cannot activate vg/lv_rimage_1: all segments missing.
  0 logical volume(s) in volume group "vg" now active

AFTER this patch:
[root@bp-01 ~]# vgchange -ay vg --partial
  Partial mode. Incomplete logical volumes will be processed.
  Couldn't find device with uuid fbI0YO-GX7x-firU-Vy5o-vzwx-vAKZ-feRxfF.
  1 logical volume(s) in volume group "vg" now active
[root@bp-01 ~]# devices vg
  Couldn't find device with uuid fbI0YO-GX7x-firU-Vy5o-vzwx-vAKZ-feRxfF.
  LV            Copy%  Devices
  lv            100.00 lv_rimage_0(0),lv_rimage_1(0)
  [lv_rimage_0]        /dev/sde1(1)
  [lv_rimage_1]        unknown device(1)
  [lv_rmeta_0]         /dev/sde1(0)
  [lv_rmeta_1]         unknown device(0)
[root@bp-01 ~]# dmsetup table vg-lv; dmsetup status vg-lv
0 1024000 raid raid1 3 0 region_size 1024 2 253:2 253:3 - -
0 1024000 raid raid1 2 AD 1024000/1024000

No WHATSNEW update necessary because this is an intrarelease fix.

 brassow
2012-02-13 17:59:21 +00:00
Alasdair Kergon
72b50d7fd2 give standard error message if lstat fails unexpectedly 2012-02-12 20:17:12 +00:00