1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

331 Commits

Author SHA1 Message Date
Zdenek Kabelac
fa6a525c2d Use cluster-wide message to request device name sync
Thanks to CLVMD_CMD_SYNC_NAMES propagation fix the message passing started
to work. So starts to send a message before the VG is unlocked.
Removing also implicit sync in VG unlock from clmvd as now the message
is delievered and processed in do_command().
Also add support for this new message into external locking
and mask this event from further processing.
2011-02-04 19:18:16 +00:00
Zdenek Kabelac
135af49da5 Increase hash table size to 1024 lv names and 64 pv uuids 2011-02-03 16:03:13 +00:00
Zdenek Kabelac
3a00204a23 Remove fs_unlock from lv_resume path
Keep it within clvmd until message for SYNC starts to work.
2011-02-03 01:58:20 +00:00
Zdenek Kabelac
fccfa9e929 Better fix for no-locking udev sync and clvmd
This is better way how to fix clustered synchronization with udev.
As the code for message passing needs fixed - put currently
fs_unlock() after every active/deactive command in clvmd to
ensure nodes are properly created in time.
2011-02-02 20:04:39 +00:00
Zdenek Kabelac
9dc3afb1fa Revert wrong fix for nolock locking missing fs_unlock
Patch was wrond and introduced recursive lock_vol
Reverting it.
2011-02-02 13:34:00 +00:00
Zdenek Kabelac
116cbc267c Fix udev synchronization for no-locking mode
Instead of implicitly syncing udev operation in clustered and
file locking code -  call synchronization directly in lock_vol() when
the operation unlocks VG

The problem is missing implicit fs_unlock() in the no_locking code.
This is used with --sysinit on read-only filesystem locking dir.
In this case vgchange -ay could exit before all udev nodes are properly
synchronised and may cause problems with accessing such node right after
vgchange --sysinint command is finished.

Add test case for vgchange --sysinit.
2011-01-31 19:52:40 +00:00
Milan Broz
679830cf58 In some versions (RHEL6) dlm_create_lockspace() always
return lockspace reference (even if lockspace already exists)
and thus increases DLM lockspace count. It means that after
clvmd restart the lockspace is still in use.

(The only way to clean environment to enable clean cluster
shutdown is call "dlm_tool leave clvmd" several times.)

Because only one clvmd can run in time, we can use simpler logic,
try to open lockspace with dlm_open_lockspace() and only if it fails
try to create new one. This way the lockspace reference doesn not
increase.

Very easily reproducible with  "clvmd -S" command.

Patch also fixes return code when clvmd_restart fails and fixes
double free if debug option was specified during restart.

Fixes https://bugzilla.redhat.com/show_bug.cgi?id=612862
2011-01-19 23:09:31 +00:00
Milan Broz
92e6277c28 Add -f (don't fork) option to clvmd and fix clvmd -d<num> description. 2011-01-17 23:13:14 +00:00
Alasdair Kergon
a8de276520 Replace fs_unlock by sync_local_dev_names to notify local clvmd. (2.02.80)
Introduce sync_local_dev_names and CLVMD_CMD_SYNC_NAMES to issue fs_unlock.
2011-01-12 20:42:50 +00:00
Zdenek Kabelac
937a21f0d2 Speedup consequent activation calls
Stop calling fs_unlock() from lv_de/activate().
Start using internal lvm fs cookie for dm_tree.
Stop directly calling dm_udev_wait() and
dm_tree_set/get_cookie() from activate code -
it's now called through fs_unlock() function.

Add lvm_do_fs_unlock()

Call fs_unlock() when unlocking vg where implicit unlock solves the
problem also for cluster - thus no extra command for clustering
environment is required - only lvm_do_fs_unlock() function is added
to call lvm's fs_unlock() while holding lvm_lock mutex in clvmd.

Add fs_unlock() also to set_lv() so the command waits until devices
are ready for regular open (i.e. wiping its begining).

Move fs_unlock() prototype to activation.h to keep fs.h private
in lib/activate dir and not expose other functions from this header.
2011-01-10 14:02:30 +00:00
Zdenek Kabelac
4522d931f6 Remove dead assignment to thisfd
Value of 'thisfd' is not read again after its assigment
2011-01-05 12:17:19 +00:00
Zdenek Kabelac
3812984422 Fix last pthread_join fix commit
Call for pthread_join() does not set errno value even though return values
looks like that. For now assign errno from return value and still use
strerror() to print some error message as this seems to be commonly used.

Add also log_sys_error() message for error close of local pipe.
2010-12-22 14:00:28 +00:00
Zdenek Kabelac
8382fc3e85 Fix memory leak in debug mode of restart_clvmd() error path 2010-12-22 12:14:11 +00:00
Zdenek Kabelac
1febdf9a37 Log error state from pthread_join operation
Value jstat is unused - so replace it with logging via log_sys_error().
2010-12-22 12:10:56 +00:00
Zdenek Kabelac
a91a9dfaf8 Replace multiple fprintf calls with one large string parameter 2010-12-20 13:48:28 +00:00
Zdenek Kabelac
bebfa29b48 Fix NULL pointer check for *buf
As ternary operator has lower priority then add operation, this check
was not doing what seemed to be expected.

So enclose the test in braces and check for NULL in *buf.
2010-12-17 12:37:49 +00:00
Peter Rajnoha
91106a4a2d Create /var/run/lvm directory during clvmd initialisation if missing.
We need to be sure that /var/run and /var/lock is always there.
(E.g. these two directories could be using tmpfs which then loose
all the content after reboot.)
2010-12-13 10:49:02 +00:00
Peter Rajnoha
7dfce0e467 Add new dm_prepare_selinux_context fn to libdevmapper and use it throughout.
Detect existence of new SELinux selabel interface during configure.
Use new dm_prepare_selinux_context instead of dm_set_selinux_context.

We should set the SELinux context before the actual file system object creation.
The new dm_prepare_selinux_context function sets this using the selabel_lookup
fn in conjuction with the setfscreatecon fn. If selinux/label.h interface
(that should be a part of the selinux library) is not found during configure,
we fallback to the original matchpathcon function instead.
2010-12-13 10:43:56 +00:00
Alasdair Kergon
2b82bd79f5 Rename vg_release to free_vg. 2010-12-08 20:50:48 +00:00
Alasdair Kergon
9d03132282 pre-release 2010-12-06 17:57:14 +00:00
Alasdair Kergon
ea7c621b0a Fix debug logging of derived flag LCK_CACHE in clvmd. 2010-12-06 17:37:09 +00:00
Zdenek Kabelac
250238d04c Log error from unlink failure 2010-12-01 12:41:49 +00:00
Zdenek Kabelac
062181292a Add logging for pipe write() and close() error
Check values from write() and close() system calls.

FIXME: Missing wrapper around 'write()'.
2010-12-01 10:46:20 +00:00
Zdenek Kabelac
a8d4cd68eb Replace snprintf with dm_snprintf
Use dm_snprintf with known error case return code (-1).
2010-11-30 22:16:25 +00:00
Zdenek Kabelac
41cf252f0b Check reallocated buffer for NULL before use
As *buf is reallocated in case CLVMD_CMD_TEST: test for NULL is needed
before printing status.
(realloc() == NULL and status != 0)
2010-11-30 22:11:26 +00:00
Zdenek Kabelac
b20e74d5d6 Remove dead assignment in wait_for_child
'pid' is not used anywhere - remove it.
2010-11-29 12:44:52 +00:00
Zdenek Kabelac
1b88184104 Remove printing of LCK_CACHE
LCK_CACHE is defined as 0x100 so it cannot be passed through
unsigned char parameter - remove it from the sprintf code.

If the LCK_CLUSTER should be printed here - lot of code need
to be reworked - so adding FIXME comment.
2010-11-29 11:05:15 +00:00
Alasdair Kergon
728074ac83 Suppress 'No PV label' message when removing several PVs without mdas. 2010-11-23 01:55:53 +00:00
Alasdair Kergon
962e678174 pre-release 2010-11-08 19:37:40 +00:00
Petr Rockai
63b8dfbde7 Alasdair correctly pointed out that if the two closes are concurrent (I haven't
checked, so they *might*), there is still a race possibility with the last
fix. This patch fixes that.
2010-10-27 11:40:14 +00:00
Petr Rockai
9b2800e861 Fix a double close in clvmd.
The management threads (main_loop, the socket thread) could close a single fd
twice in a row sometimes. At least one other thread can be running at the same
time as the threads doing the double close. That one running thread also
happens to do some IO (namely, open /proc/devices, read from it, close it). If
there was enough "demand" for the local socket, this could happen:

- a connection to clvmd is about to finish, let's say the fd is 13 (it often
  happens to be in my test script, don't ask why)
- the local_sock thread calls close(13)
- the lvm thread calls open("/proc/devices"...) and gets 13
- the main_loop thread calls close(13) [OOPS!]
- new connection arrives, and is accept'd by a (new) local_sock thread
- the accept gives an fd of 13 (since it's the lowest free fd at this point)
- the lvm thread gets around to read from it's /proc/devices handle... 13,
  again
- the lvm thread hangs forever trying to read from the socket instead of
  /proc/devices

Signed-off-by: Petr Rockai <prockai@redhat.com>
Reviewed-by: Milan Broz <mbroz@redhat.com>
2010-10-27 09:13:37 +00:00
Zdenek Kabelac
2ecd717dc4 Hotfix usage of __builtin_unreachable()
It's quite new feature which is not supported by older compilers.
So until some better macros are introduced into LVM code - hotfix current
compilation problems and compile this code only for __clang__ defining compilers.
2010-10-26 09:57:03 +00:00
Zdenek Kabelac
6426e5d3e6 Instrument compiler about code unreachability
Clang needs some instrumentation help for static code analysis.
It helps gcc and human reader as well.
2010-10-26 09:01:47 +00:00
Petr Rockai
8f1ead4640 Revert some debug statements that slipped in with last checkin. 2010-10-20 14:51:18 +00:00
Petr Rockai
d28c8ccfbd Fix a deadlock in clvmd.
The signalling code (pthread_cond_signal/pthread_cond_wait) in the
pre_and_post_thread was using the wait mutex (see man pthread_cond_wait)
incorrectly, and this could cause clvmd to deadlock when timing was
right. Detailed explanation of the problem follows.

There is a single mutex around (L for Lock, U for Unlock), a signal (S) and a
wait (W). C for pthread_create. Time flows from left to right, each arrow is a
thread.

So first the "naive" scenario, with no mutex (PPT = pre_and_post_thread, MCT =
main clvmd thread; well actually the thread that does read_from_local_sock). I
will also use X, for a moment when MCT actually waits for something to happen
that PPT was supposed to do.


MCT -----C ------S--X-----S----X----------------------S------XXXXXXXXX
         |                everything OK up to this --> <-- point...
PPT       -----WWW-----WWWW------------------------------WWWWWWWWWWWWW

Ok, so pthread API actually does not let you use W/S like that. It goes out of
its way to tell you that you need a mutex to protect the W so that the above
cannot happen. *But* if you are creative and just lock around the W's and S's,
this happens:

MCT ----C-----LSU----X-----LSU----X------------LSU------XXXXXXX
        |
PPT      ---LWWWU-------LWWWWU-----------------------LWWWWWWWWW

Ooops. Nothing changed (the above is what actually was done by clvmd before
this satch). So let's do it differently, holding L locked *all* the time in
PPT, unless we are actually in W (this is something that the pthread API does
itself, see the man page).

MCT ----C-----LSU------X---LSU---X-----LLLLLLLSU----X----
        |                             (and they live happily ever after)
PPT     L---WWWWW---------WWWW----------------W----------

So W actually ensures that L is unlocked *atomically* together with entering
the wait. That means that unless PPT is actually waiting, it cannot be
signalled by MCT. So if MCT happens to signal it too soon (it wasn't waiting
yet), it (MCT) will be blocked on the mutex (L), until PPT is actually ready to
do something.
2010-10-20 14:46:45 +00:00
Milan Broz
586b56b18c Fix wrong use of LCK_WRITE
In all top vg read functions only LCK_VG_READ/WRITE can be used.
All other vg lock definitions are low-level backend machinery.

Moreover, LCK_WRITE cannot be tested through bitmask.
This patch fixes these mistakes.

For _recover_vg() we do not need lock_flags, it can be only
two of above and we always upgrading to LCK_VG_WRITE lock there.
(N.B. that code is racy)

There is no functional change in code (despite wrong masking
it produces correct bits:-)
2010-08-19 23:26:31 +00:00
Alasdair Kergon
22149572e8 Use 'SINGLENODE' instead of 'dead' in clvmd singlenode messages.
Ignore snapshots when performing mirror recovery beneath an origin.
Pass LCK_ORIGIN_ONLY flag around cluster.
Add suspend_lv_origin and resume_lv_origin using LCK_ORIGIN_ONLY.
2010-08-17 19:25:05 +00:00
Alasdair Kergon
2d6fcbf67d Allow internal suspend and resume of origin without its snapshots. 2010-08-17 16:25:32 +00:00
Zdenek Kabelac
9f926fd060 Use void parameter for function definition. 2010-08-03 13:06:35 +00:00
Alasdair Kergon
65ce9feb72 Never use clvmd singlenode unless explicitly requested with -Isinglenode. 2010-07-28 14:01:40 +00:00
Alasdair Kergon
8bae0a1ecf Change clvmd to communicate with lvm via a socket in /var/run/lvm. (mbroz)
https://bugzilla.redhat.com/show_bug.cgi?id=614248 [CVE-2010-2526]
2010-07-28 13:55:42 +00:00
Fabio M. Di Nitto
8c4e8a185a Add dm_create_lockfile to libdm to handle pidfiles for all daemons.
Switch dmeventd to use dm_create_lockfile and drop duplicate code.
Allow clvmd pidfile to be configurable.
Switch cmirrord and clvmd to use dm_create_lockfile.
2010-07-13 13:51:01 +00:00
Milan Broz
b5243aac02 Fix another segfault in clvmd -R if no response from daemon received.
Missed the same problem in another function...
2010-07-01 21:46:09 +00:00
Milan Broz
185ac73d18 Remove superfluous suspended device counter from clvmd.
Moreover, in current mirror handling, when it calls activate
on removed but suspended detached log this counter drops below zero
and confuses debug log.
2010-07-01 21:23:47 +00:00
Petr Rockai
6472c7e11f Maintain memlock balance in clvmd.
When a mirror is being downconverted in a cluster, a series of suspends and
resumes is executed.

With the change to using UUIDs in dev_manager instead of names, the behaviour
has changed with regards to including an _mlog in the deptree of a logical
volume. In the old (pre-UUID-enabled) code, the _mlog would appear in a deptree
of any volume purely based on a name match: a linear volume foo would include
foo_mlog in its dependencies if that happened to exist. This behaviour was
fixed and the mlog is now only included for mirrors.

By a coincidence, this mlog bug had been hiding a different bug in clvmd. When
a mirror is being dismantled (and converted to a linear volume), it is first
suspended as a whole, then later resumed in parts. Nevertheless, the overall
memlock balance is maintained in this operation. The problem kicks in, because
even though the mirror log was suspended as part of the mirror, when the
dismantled mirror is resumed again, it is no longer a mirror and therefore the
mirror log stays suspended. This would not be a problem in itself, since
_delete_lv (from metadata/mirror.c) is called on it subsequently, which does an
activate/deactivate cycle and removes the LV. The activate/deactivate cycle
correctly prompts clvmd to resume the device: however, in doing this, it will
issue an unpaired resume operation (the suspend that caused the mirror log to
be suspended is paired with resuming the dismantled mirror later). We have
concluded that the path in clvmd should never affect memlock_count, since there
should never be an unmatched explicit suspend preceding this resume.
2010-06-30 21:40:27 +00:00
Alasdair Kergon
b4ee00356b Various cleanups following recent commits. 2010-06-21 15:56:57 +00:00
Milan Broz
aec39dcc34 Let running clvmd process time to reexec.
Because execve stops the command loop,
we never receive response (only socket close) for clvmd -S,
so waiting for response here makes no sense.

But if the calling process (clvmd -S)  exits too early, connection
is closed from client side, clvmd takes this as an error and
never run restart code.

Ugly hack(TM).
2010-06-21 10:45:15 +00:00
Milan Broz
d2031f6a16 Clean up cluster lock mode and flags definition.
Code is mixing up internal DLM and LVM definitions of lock
modes and flags.

OpenAIS and singlenode locking do not depend on DLM but
code currently cannot be compiled without libdlm.h!

LCK_* flags is LVM abstraction, used through all the code.
Only low-level backend (clvmd-cman etc) should use DLM definitions,
also this code should do all needed conversions.

Because there are two DLM flags used in generic code
(NOQUEUE, CONVERT) we define it similar way like lock modes.
(So all needed binary-compatible flags are on one place in locking.h)

(Further code cleaning still needed, though:-)
2010-06-17 12:48:54 +00:00
Zdenek Kabelac
cee2f123a4 Use "" instead of <> for configure.h and libdevmapper.h
Move configure.h as the first header for clvmd source files.
2010-06-15 11:00:44 +00:00
Milan Broz
4c10ab5627 Fix segfault in clvmd -R if no response from daemon received. 2010-06-07 13:52:52 +00:00
Milan Broz
8d6e0c9562 Fix restart of clvmd using -S switch
- allocate environment dynamically (still missing some limit?)
 - try to recover, if destroy failed (do not destroy lvm here) and free memory
 - check strdup() return codes
 - report failure to log
 - do not print NULL in exclusive lock loop
2010-06-04 12:59:30 +00:00
Zdenek Kabelac
b5c2529bf8 Use absolute paths in commands
clvmd restart does not work at all if clvmd binary is not in current
dir.
2010-06-03 13:50:26 +00:00
Alasdair Kergon
5cb00fe6cd typo 2010-04-30 14:51:58 +00:00
Alasdair Kergon
3ceb76089c pre-release 2010-04-30 14:49:42 +00:00
Christine Caulfield
c407d2bd11 Add -S command to clvmd, so it can restart itself and still
preserve exlusive LV locks.
2010-04-20 14:07:37 +00:00
Alasdair Kergon
3972d7a2a4 pre-release 2010-04-14 18:54:37 +00:00
Alasdair Kergon
9c29f2f509 pre-release 2010-04-14 18:53:04 +00:00
Zdenek Kabelac
6ea4f7dfc0 Add error diagnostic for setenv failure. 2010-04-13 20:54:57 +00:00
Zdenek Kabelac
b409df00a9 Use C locales and use_mlockall for clvmd.
Use same steps for clvmd as for dmeventd - using C locales to avoid reading
large mmaps and use mlockall() for threaded version.
2010-04-13 19:54:16 +00:00
Zdenek Kabelac
23b059e7b7 INSTALL rules updates
Patch is inspired by Debian's extra patch.

- removes OWNER & GROUP make vars they are parts of INSTALL command.
- adds INSTALL_PROGRAM for executable, uses $(INSTALL)
- adds INSTALL_DATA for non-executable data, uses ($INSTALL)
- adds INSTALL_WDATA for writable non-executable data, uses ($INSTALL)
- adds configure option --enable-write_install - to support
  installatin of writable files used by distribution
- replaces usage of ifeq @LIB_SUFFIX@ with $(LIB_SUFFIX)
- installs .a files from static builds without executable flag
- installs .a files to $(usrlibdir) instead of $(libdir)
- installs all static binaries to $(staticdir)
- create .so links for devel package in $(usrlibdir) instead of
  $(libdir)
- makes .so and .so.LIB_VERSION files within builddir
- removes VERSIONED_SHLIB and created versioned LIB_SHARED automagicaly
- install LIB_SHARED via install_lib_shared target
- install plugins via install_lib_shared_plugin target
- prints whole 'install' command during installation instead of less
  informative "Installing  $(something) $(somewhere)"
- install multiple man pages with one INSTALL command
- use DISTCLEAN_TARGETS instead of creating multiple distclean targets
2010-04-09 21:42:48 +00:00
Zdenek Kabelac
c737d34804 Use vpath instead of VPATH.
Usage of VPATH makes troubles when used within $(builddir).
Not only source files are being found through VPATH,
but targets as well. (make --debug=v)

Thus if user builds the code in $(srcdir) and also in some $(builddir)
he gets mangled results as some generated files (i.e. .export.sym)
are 'reused' from $(srcdir) instead of $(builddir).

This patch switches to use vpath were we could explicitly name
suffixes that should be looked via vpath - we must take care,
we do not generate files with these suffixes:
.c, .in, .po, .exported_symbols
2010-04-09 21:34:25 +00:00
Christine Caulfield
e199542bd3 Fix a thread race in clvmd that could cause lockups on very busy systems 2010-04-06 15:29:30 +00:00
Zdenek Kabelac
b7be589ed0 Fixing another set of distclean problems where we left some generated files
in clvmd, dmevend, man, tests.

Don't include dependency files for clow and cscope.out targets

Improve dependency tracking for dmeventd and liblvm2cmd sources.
2010-03-29 14:17:59 +00:00
Mike Snitzer
217cb1aa84 Use a real socket for singlenode clvmd to fix clvmd's high cpu load. 2010-03-26 15:45:36 +00:00
Mike Snitzer
7b0f529d3e Fix clvmd cluster propagation of dmeventd monitoring mode.
clvmd's do_lock_lv() already properly controls dmeventd monitoring based
on LCK_DMEVENTD_MONITOR_MODE in lock_flags -- though one small fix was
needed for this to work: _lock_for_cluster() must treat
dmeventd_monitor_mode()'s return as a tri-state value.

Also cleanup do_lock_lv() to:
- explicitly init_dmeventd_monitor() based on LCK_DMEVENTD_MONITOR_MODE
- no longer reset init_dmeventd_monitor() to default at the end of
  do_lock_lv() -- it is unnecessary
2010-03-26 15:40:13 +00:00
Mike Snitzer
4c42d18e0c Revert having clvmd consult the lvm.conf "activation/monitoring".
Correctly implementing the intent of this change requires more
analysis.
2010-03-24 22:25:11 +00:00
Mike Snitzer
a6bc975a24 Improve activation monitoring option processing
. Add "monitoring" option to "activation" section of lvm.conf
. Have clvmd consult the lvm.conf "activation/monitoring" too.
. Introduce toollib.c:get_activation_monitoring_mode().
. Error out when both --monitor and --ignoremonitoring are provided.
. Add --monitor and --ignoremonitoring support to lvcreate.  Update
  lvcreate man page accordingly.
. Clarify that '--monitor' controls the start and stop of monitoring in
  the {vg,lv}change man pages.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2010-03-23 22:30:18 +00:00
Alasdair Kergon
8b373275a2 Avoid duplicate definitions. 2010-03-23 14:35:08 +00:00
Petr Rockai
649c45078f Add infrastructure for running the functional testsuite with locking_type set
to 3, using a local (singlenode) clvmd.
2010-03-18 09:19:30 +00:00
Milan Broz
ec7a713558 Fix clvmd Makefile to not overwrite LIBS from template definition 2010-03-16 08:47:46 +00:00
Zdenek Kabelac
f30875dbc6 Pthread linking change
Create new substituted variable PTHREAD_LIBS and link this library
only with tools/libs which really needs it - i.e. dmeventd.

Check for libpthread only for builds with clvmd or dmeventd.

Remove variable LIB_PTHREAD
2010-03-04 11:21:05 +00:00
Zdenek Kabelac
f0f0b802d1 Introduce LVMINTERNAL_LIBS
Keep dependency libraries for liblvm-internal in one place.
2010-03-04 11:12:39 +00:00
Zdenek Kabelac
814aebc4e9 Use $(top_builddir) for inclusion of make.tmpl in Makefiles. 2010-03-04 09:51:37 +00:00
Christine Caulfield
9dc28ab802 Make clvmd -V return zero status rather than 1. 2010-02-02 08:54:29 +00:00
Milan Broz
9b5fd08d26 Unlock shared lock if activation calls failed.
Clvmd should unlock new lock if activation in device-mapper fails.
2010-01-26 08:00:02 +00:00
Milan Broz
7a96516819 Never scan suspended devices in clvmd.
For mirror repair (and similar tasks) it can happen that full
device rescan is issued from clvmd.

Because code can be in the middle of repair (calling suspend)
clvmd should never try to scan suspended devices
(otherwise it causes deadlock).

Also code must not change ignore_suspended_device flag when
doing refresh_filters (called from lvmcache scan code).
2010-01-19 13:25:00 +00:00
Milan Broz
0e06c92fdf Propagate commit and revert metadata event to other nodes in cluster.
This patch tries to correctly track changes in lvmcache related to commit/revert.

For vg_commit: if there is cached precommitted metadata, after successfull commit
these metadata must be tracked as committed.

For vg_revert: remote nodes must drop precommitted metadata and its flag in lvmcache.

(N.B. Patch do not touch LV locks here in any way.)

All this machinery is needed to properly solve remote node cache invalidaton which
cause several problems recently observed.
2010-01-05 16:09:33 +00:00
Milan Broz
c9118a1d20 Proper mask lock mode for vg lock.
Lock mode is int masked by LCK_TYPE_MASK, always.

Patch also remove uneccessary masking lock flag on sender side,
if masking is needed, it is don on client side already.
2010-01-05 16:07:56 +00:00
Milan Broz
d37be0b865 Add possibility to handle precommitted metadata in lvmcache.
- Add drop_precommitted flag to force drop precommitted metadata
 - add lvmcache_commit_metadata() which upgrades precommitted metadata in cache

No functional change in this patch - just preparation for following change.
2010-01-05 16:06:42 +00:00
Milan Broz
ac85c2e75b Move processing of VG locks to separate function (similar to LV locks).
And print some debugging info.

No functional change in this patch.
2010-01-05 16:05:12 +00:00
Milan Broz
d7f44761ab Properly decode flags even for VG locks.
And decode flags in humar readable form in client.
And clean some trailing whitespaces.

No functional change in this patch (only debugging messages changed).
2010-01-05 16:03:37 +00:00
Milan Broz
452bbb87a9 Fix missing include. 2009-12-09 19:30:56 +00:00
Milan Broz
27132718d4 Add memlock information to do_lock_lv debug output.
This helps a lot to detect that something strange happened.
2009-12-09 19:01:27 +00:00
Milan Broz
85fabd8116 Never ever use distributed lock for LV in non-clustered VG.
The LV locks make sense only for clustered LVs.

Properly check cluster flag and never issue cluster lock here.

There are several places in code, where it is already checked, this
patch add this check to all needed calls.

In previous code the lock behaviour was inconsistent,
for example, the pre/post callback can take lock even for local volume,
but deactivate call do not released this lock and it remains held forever.

The local LV lock request now just let run the underlying activation code
on local node, the same process like in local locking.

(Again, this is important for new mirror repair calls, here for local
mirrors but with cluster locking enabled.)
2009-12-09 19:00:16 +00:00
Milan Broz
4b3efd3537 Allow implicit lock conversion for pre/post callbacks.
This is unnoticed regression from commit 31672ff60e

The pre/post callback need to convert lock always, local node
is going to modify metadata in this case, it it fails conversion,
the call is ignored.

Also it fixes bug when the lock is not yet held, we cannot set LKF_CONVERT
in this case, it will fail because this lock do not exist.

Note that the automatic conversion is still disabled in activate
call, so the original fix (reactivation of exlusive LV) should
be still in place.
2009-12-09 18:55:53 +00:00
Milan Broz
4499aa2ea5 Allow implicit "convert" to the same lock mode.
(Code already not fail if unlocking not locked resource.)

This is needed in pre/post lock_lv call, where we can
request the same lock on local node becuase of suspend call.
2009-12-09 18:45:12 +00:00
Milan Broz
cc31b2bd3f Get rid of magic masks in cluster locking code - clvmd part.
- do_command and lock_vg expect flags (no change here)

Bug fixes:
- lock_vg should check for NONBLOCK on lock_cmd, flags have this bit masked-out

- do_pre/post_command expect do not mask flag at all, this causes that
the code inside is never run! (see following patches, these functions
expect plain command without flags)
2009-12-09 18:42:02 +00:00
Milan Broz
a4893bc377 Revert vg_read_internal change, clvmd cannot use vg_read now. (2.02.55) 2009-11-23 10:44:50 +00:00
Petr Rockai
090585a8f4 Un-export vg_read_internal. 2009-11-19 12:13:37 +00:00
Alasdair Kergon
cb63efc6f9 Fix clvmd segfault when refresh_toolcontext fails. (brassow, bz 506986) 2009-10-22 17:45:23 +00:00
Christine Caulfield
c503c83c78 Make clvmd return 0 on success rather than 1. 2009-10-12 08:33:30 +00:00
Alasdair Kergon
437219e27d More makefile cleaning up and fixing. (gentoo) 2009-10-05 13:46:00 +00:00
Alasdair Kergon
db8b5af9d9 Allow for a build directory separate from the source. 2009-10-02 19:10:31 +00:00
Christine Caulfield
29846c24a8 Stop clvmd from automatically doing lock conversions. Now, if a lock
is granted at one mode and an attempt to convert it wthout the LCK_CONVERT
flag set then it will return errno=EBUSY.

This fixes a pretty bad bug in which an LV could be activated exclusively on
one node and lvchange -ay on another would convert it to shared!

It might break some things in other areas, but I doubt it.
2009-10-01 14:14:17 +00:00
Alasdair Kergon
d0800aba01 missing (C) reminders 2009-09-15 12:51:28 +00:00
Christine Caulfield
b45e346f7a Add some code to clvmd to look in the corosync confdb to see what cluster
interface it should be using, it can still be overriden with -I.

If corosync isn't running or there is no information then the usual
checking will happen.

This code only builds if corosync is available.
2009-09-01 09:48:01 +00:00
Alasdair Kergon
a946372e50 Rewrite clvmd configuration code. 2009-08-28 19:22:05 +00:00
Christine Caulfield
defed336ae Fix compilation warning in clvmd.c 2009-08-13 10:39:41 +00:00
Christine Caulfield
ee1e49ec53 Fix locking in clvmd
The changes to remove LCK_NONBLOCK from the LVM locks broke clvmd because the
code was clearly wrong but working anyway! The constant was being masked rather
than the variable that was supposed to match against it.
2009-08-05 14:18:35 +00:00
Alasdair Kergon
c07d773e67 All LV locks are non-blocking so remove LCK_NONBLOCK from separate macros. 2009-07-24 18:15:06 +00:00