1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

576 Commits

Author SHA1 Message Date
Peter Rajnoha
c36d4632a6 conf: add log/command_log_{sort,cols} config settings 2016-06-20 11:33:40 +02:00
Peter Rajnoha
99c2a2b960 report: add CMDLOG report type
This is a preparation for new CMDLOG report type which is going to be
used for reporting LVM command log.

The new report type introduces several new fields (log_seq_num, log_type,
log_context, log_object_type, log_object_group, log_object_id, object_name,
log_message, log_errno, log_ret_code) as well as new configuration settings
to set this report type (report/command_log_sort and report/command_log_cols
lvm.conf settings).

This patch also introduces internal report_cmdlog helper function
which is a wrapper over dm_report_object to report command log via
CMDLOG report type and which is going to be used throughout the code
to report the log items.
2016-06-20 11:33:08 +02:00
David Teigland
8b7a78c728 lvmcache: improve duplicate PV handling
Wait to compare and choose alternate duplicate devices until
after all devices are scanned.  During scanning, the first
duplicate dev is kept in lvmcache, and others are kept in a
new list (_found_duplicate_devs).

After all devices are scanned, compare all the duplicates
available for a given PVID and decide which is best.

If the dev used in lvmcache is changed, drop the old dev
from lvmcache entirely and rescan the replacement dev.
Previously the VG metadata from the old dev was kept in
lvmcache and only the dev was replaced.

A new config setting devices/allow_changes_with_duplicate_pvs
can be set to 0 which disallows modifying a VG or activating
LVs in it when the VG contains PVs with duplicate devices.
Set to 1 is the old behavior which allowed the VG to be
changed.

The logic for which of two devs is preferred has changed.
The primary goal is to choose a device that is currently
in use if the other isn't, e.g. by an active LV.

. prefer dev with fs mounted if the other doesn't, else
. prefer dev that is dm if the other isn't, else
. prefer dev in subsystem if the other isn't

If neither device is preferred by these rules, then don't
change devices in lvmcache, leaving the one that was found
first.

The previous logic for preferring a device was:

. prefer dev in subsystem if the other isn't, else
. prefer dev without holders if the other has holders, else
. prefer dev that is dm if the other isn't
2016-05-06 09:00:00 -05:00
David Teigland
56c68b3476 lvmetad: preemptively check and rescan in commands
Move checking the lvmetad state, and the possible rescan,
out of lvmetad_send() to the start of the command.

Previously, the token mismatch and rescan would occur
within lvmetad_send() for some other request.  Now,
the token mismatch is detected earlier, so the
rescan can be done before the main command is in
progress.  Rescanning deep within the processing of
another command will disturb the lvmcache state of
that other command.

A rescan already exists at the start of the command
for the case where foreign VGs are going to be read.
This same rescan is now also performed when there is
an lvmetad token mismatch (from a changed global_filter).

The commands pvscan/vgscan/lvscan/vgimport are excluded
from this preemptive checking/rescanning for lvmetad
because they want to do rescanning themselves explicitly.

If rescanning devices fails, then lvmetad has not been
correctly repopulated and should not be used, so make
the command revert to not using lvmetad.
2016-04-13 14:05:42 -05:00
Peter Rajnoha
06ef7ba876 doc: describe lvmlockd/lvmpolld features as available if LVM compiled with lockd/polld support 2016-03-30 14:10:56 +02:00
David Teigland
8f01ee3035 remove unused define 2016-03-09 13:38:04 -06:00
David Teigland
2d5dc6512e dbus: add notification from commands
When a command modifies a PV or VG, or changes the
activation state of an LV, it will send a dbus
notification when the command is finished.  This
can be enabled/disabled with a config setting.
2016-03-07 10:06:09 -06:00
Peter Rajnoha
ff6e124a33 conf: add metadata/lvs_history_timeout configuration setting 2016-03-03 13:50:59 +01:00
Peter Rajnoha
ccebf3100d conf: add metadata/record_lvs_history configuration setting
The metadata/record_lvs_history is global switch which enables or
disables recording historical LVs in metadata.

If both metadata/record_lvs_history=1 lvm.conf option and
--nohistory command switch is used at the same time, the
--nohistory prevails.
2016-03-03 13:49:15 +01:00
David Teigland
57cd94b9e3 pvs: replace 'unknown device' with [unknown]
A config setting can restore the old string.
2016-03-01 11:12:03 -06:00
M.H. Tsai
3b76e9fd98 config: fix verbose type to int
'verbose' was marked as a boolean option while it
takes integer args - so it has limited usage to 0 or 1,
but we supported 0-4 at least.

Fix it by switching to corrent int type.
(Hopefully noone was trying to use this variable as true/yes/false/no
way - as the would be unsupported/undocumented).
2016-02-11 18:30:39 +01:00
Peter Rajnoha
8423be80ee conf: use use_blkid_wiping=0 if not defined in lvm.conf and support not compiled in
Normally, we generate and provide lvm.conf file where use_blkid_wiping
is set based on whether support for this is compiled in or not. This was
generated properly based on configure.

However, if lvm.conf is not used at all (someone deletes it) or the value
in lvm.conf is commented out (user edited it), we still need to use
proper default value that is based on DEFAULT_USE_BLKID_WIPING taken
from configure script - we used hardcoded value of "1" in this case
by mistake.
2016-02-10 14:53:10 +01:00
Peter Rajnoha
136fd8f2f6 conf: add metadata/check_pv_device_sizes 2016-01-22 14:16:00 +01:00
Zdenek Kabelac
fcbef05aae doc: change fsf address
Hmm rpmlint suggest fsf is using a different address these days,
so lets keep it up-to-date
2016-01-21 12:11:37 +01:00
Peter Rajnoha
939d296525 conf: fix 'the volume list' vs 'volume list' and '@*' 2016-01-13 15:47:26 +01:00
Peter Rajnoha
1417ed304b cleanup: rename 'invisible devices' to 'hidden devices' 2016-01-13 15:22:46 +01:00
Peter Rajnoha
e168b5de75 conf: add report/mark_invisible_devices 2016-01-13 12:01:10 +01:00
Peter Rajnoha
1ea8afd3ca lvmconfig: add --sinceversion for --type new
Just for convenience to display all new configuration settings
introduced since given version (before, there was only --atversion
to display settings introduced in concrete version).

For example:
	$ lvmconfig --type new --sinceversion 2.2.120
	allocation {
		# cache_mode="writethrough"
		# cache_settings {
		# }
	}
	global {
		use_lvmlockd=0
		# lvmlockd_lock_retries=3
		# sanlock_lv_extend=256
		use_lvmpolld=1
	}
	activation {
	}
	# report {
		# compact_output_cols=""
		# time_format="%Y-%m-%d %T %z"
	# }
	local {
		# host_id=0
	}
2015-11-25 14:12:12 +01:00
Zdenek Kabelac
193e7f5973 config: check vdef pointer before dereference
Coverity notices we check for v_def != NULL elsewhere, so it thinks
it may be possibly NULL also here.
2015-11-16 01:16:11 +01:00
Zdenek Kabelac
8d258c7df4 coverity: hint
Here Coverity cannot see the pointer cannot be NULL in this
code path - opened coverity case #00531860.

We could make a model to avoid seeing related reports,
but then we loose coverage for modeled function.

So decided to add minor hint for this case.
2015-11-13 11:18:27 +01:00
David Teigland
4b47ee5296 config: fix copy error in examples
The same example was copied without
changing the variable name.
2015-11-03 11:07:27 -06:00
Peter Rajnoha
a5c4c4efbd conf: clarify compact output settings 2015-10-20 11:01:09 +02:00
Peter Rajnoha
23d9b17a7b cleanup: typo in comment: compact_output_fields should be compact-output_cols 2015-10-19 09:59:05 +02:00
Peter Rajnoha
c3bfe07f2a config: add report/compact_output_cols to control which columns to compact in report output
The new report/compact_output_cols setting has exactly the same effect
as report/compact_output setting. The difference is that with the new
setting it's possible to define which cols should be compacted exactly
in contrast to all cols in case of report/compact_output.

In case both compact_output and compact_output_cols is enabled/set,
the compact_output prevails.

For example:

$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=0
compact_output_cols=""

$ lvs vg
  LV    VG   Attr       LSize Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  lvol0 vg   -wi-a----- 4.00m

---

$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=0
compact_output_cols="data_percent,metadata_percent,pool_lv,move_pv,origin"

$ lvs vg
  LV    VG   Attr       LSize Log Cpy%Sync Convert
  lvol0 vg   -wi-a----- 4.00m

---

$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=1
compact_output_cols="data_percent,metadata_percent,pool_lv,move_pv,origin"

$ lvs vg
  LV    VG   Attr       LSize
  lvol0 vg   -wi-a----- 4.00m
2015-10-16 17:05:54 +02:00
David Teigland
26da6a3e10 config: improve cache_settings description 2015-10-01 14:23:39 -05:00
Heinz Mauelshagen
be393f6722 raid: Introduce DEFAULT_RAID_MAX_IMAGES
Prepare to allow for the number of images in a raid set to be
larger than the limit for old-style dm raid1.
2015-09-28 21:38:40 +01:00
David Teigland
d08427030d config: improve description text layout
This mainly makes the description text use 80 columns.
There are a few minor adjustments to wording to help
the text layout, and a couple minor improvements to
descriptions.
2015-08-18 14:02:32 -05:00
Zdenek Kabelac
40af31729f cleanup: typo fix and drop \
Fix 'th e'  and use % directly.
2015-08-18 15:00:08 +02:00
Zdenek Kabelac
55a9262bdb cleanup: unused header files (Coverity) 2015-08-18 15:00:08 +02:00
David Teigland
dece918bc8 config: create lists of accepted values in descriptions 2015-08-17 14:50:41 -05:00
David Teigland
b091c37595 config: add empty lines around examples
When --withspaces is used, a blank line is
added before and after an Example section,
making the text less dense.
2015-08-17 13:52:34 -05:00
David Teigland
ca70770cfd config: recognize a blank comment line
Consider the comment line "#\n" to be a blank line, and
print a blank line at that position when --withspaces is set.
2015-08-17 13:52:34 -05:00
David Teigland
5243a81c29 config: explain automatic default values
Before printing a commented automatic config value,
print a line describing what it is.  Otherwise, the
commented value can look like it's a part of an
example preceding it.
2015-08-17 13:52:34 -05:00
Alasdair G Kergon
be1db6b6c1 pre-release 2015-08-17 17:20:14 +01:00
Zdenek Kabelac
80bc87e377 cache: more comments for new setting 2015-08-17 17:26:39 +02:00
Zdenek Kabelac
4b28383b1c cache: move detection code to cache_set_policy
Move code which runtime detects settings for cache_policy
out of config dir to cache seg handling code.

Also mark cache_mode as command profilable setting.
2015-08-17 15:52:06 +02:00
Alasdair G Kergon
623b46a17d device: Don't try to close config file on failure.
$file: open failed: Permission denied
Failed to load config file $file
Attempt to close device '$file' which is not open.
2015-08-17 12:57:01 +01:00
Zdenek Kabelac
d4c024c836 cache: use undefined settings for cache_policy
As cache_policy is evaluated in runtime, we no longer should use
CFG_COMMENTED, but have to switch to CFG_UNDEFINED.

So as long as the value is undefined, it's runtime evaluated.
Once it's set - it's always respected (no runtime fallback).

Also fix version of introduced settings to 2.2.128.
2015-08-17 11:25:03 +02:00
David Teigland
829384f46d config: description updates
Make the first line of every description a complete one
line sentence for the benefit of lvmconfig --withsummary.
2015-08-12 15:35:45 -05:00
Zdenek Kabelac
ece758457d cleanup: use IEC KiB units
Reduce mixing of KB, kiB and use just KiB.
2015-08-12 14:33:15 +02:00
Zdenek Kabelac
9edd2258ff config: extend definition for Allocation
Extend comment for this section.
2015-08-12 14:33:15 +02:00
Zdenek Kabelac
13c7bbf8a9 config: support longer config paths
64 bytes might not be enough, so use larger buffer size.
2015-08-12 14:33:15 +02:00
Zdenek Kabelac
feb8e9a790 cache: runtime detect default policy
When the policy is not preset in lvm.conf,
detect in runtime whether to use 'mq' or
new available 'smq'.
2015-08-12 14:11:17 +02:00
Zdenek Kabelac
8a74d1ec79 cache: detect smq policy presence
Add code to detect available cache features.
Support policy_mq & policy_smq  features which might be disabled.

Introduce global_cache_disabled_features_CFG.
2015-08-12 14:11:17 +02:00
Zdenek Kabelac
036d90bba6 cache: add cache_policy cache_settings
Add new profilable configurables:

allocation/cache_policy
allocation/cache_settings

and mark allocation/cache_pool_chunk_size as profilable as well.

Obsolete allocation/cache_pool_cachemode and
introduce new allocation/cache_mode instead.

Rename DEFAULT_CACHE_POOL_POLICY to DEFAULT_CACHE_POLICY.
2015-08-12 14:11:16 +02:00
Peter Rajnoha
8bfcefe11a config: add CFG_SECTION_NO_CHECK flag
The CFG_SECTION_NO_CHECK flag can be used to mark a section
and its whole subtree as containing settings where checks
won't be made (lvmconfig --validate).

These are setting where we don't know the names and and type
in advance and they're recognized in runtime. As we don't know
the type and name in advance, we can't do any checks here
of course.

Use this flag with great care as it disables config checks
for the whole config subtree found under such section.

This flag is going to be used by subsequent patches from
Zdenek to support some cache settings...
2015-07-22 14:25:42 +02:00
Peter Rajnoha
d10fb73f63 config: also log the value used if defined in config, not just defaults
Commit 7e728fe1a1 added a log call
directly in find_config_tree_array when defaults are used.

This patch also adds the log for the value which is found in
existing configuration and for which defaults are not used.

For example:

Defaults used:
config/config.c:1428   devices/scan not found in config: defaulting to scan = [ "/dev" ]

Value defined in configuration used:
config/config.c:1431   Setting devices/scan to scan = [ "/dev", "/mydev", "/abc" ]

This makes the logging consistent with the other find_config_tree_* functions.
2015-07-15 16:02:20 +02:00
Peter Rajnoha
7e728fe1a1 config: add "defaulting to" message in case we fall back to defaults in find_config_tree_array 2015-07-15 10:50:57 +02:00
Peter Rajnoha
ac3143c093 config: {thin,cache}_{check,repair}_options are never undefined
Require global/{thin,cache}_{check,repair}_options to be always defined.
If not defined directly by user in the configuration and if there's no
concrete default option to use, make "" (empty string) the default one -
it's then clearly visible in the "lvmconfig --type default" (and
generated lvm.conf) and also it makes its handling in the code more
straightforward so we don't need to handle undefined values.

This means, if there are no default values for these settings defined,
we end up with this generated now:
  {thin,cache}_{check,repair}_options = [ "" ]

So the value is never undefined and if it is, it's an error.

(The cache_repair_options is actually not used in the code at the moment,
but once the code using this setting is in, it will follow the same logic
as used for thin_repair_options.)
2015-07-14 10:13:41 +02:00
Peter Rajnoha
3b6840e099 config: replace find_config_tree_node with find_config_tree_array where appropriate 2015-07-08 13:03:08 +02:00
Peter Rajnoha
67a61cce1b config: add find_config_tree_array
Before, we used general find_config_tree_node function to retrieve
array values. This had a downside where if the node was not found,
we had to insert default values directly in-situ after the
find_config_tree_node call. This way, we had two copies of default
values - one in config_settings.h and the other one directly in the
code where we found out that find_config_tree_node returned NULL and
hence we needed to fall back to defaults.

With separate find_config_tree_array used for array config values,
we keep all the defaults centrally in config_settings.h because
the new find_config_tree_array automatically returns these defaults
if it can't find any value set in the configuration.

This patch just makes the behaviour exactly the same for arrays as
for any other non-array type where we call find_config_tree_<type>
already, hence making the internal interface for handling array
values consistent with the rest of the config types.
2015-07-08 12:59:22 +02:00
Alasdair G Kergon
88760141da WHATS_NEW: Update. Fix renamed config setting vsn. 2015-07-07 13:20:01 +01:00
Zdenek Kabelac
0ac20a8fdb cache: support clear-needs-check
Support newer cache tool which support new option
--clear-needs-check-flag.

Code does same as for thin_check.
2015-07-07 09:57:27 +02:00
David Teigland
633aea92fb config: remove read_only_lock_modes
It had been added as part of lvmlockd code, but it does
not seem particularly useful.
2015-07-06 11:44:28 -05:00
David Teigland
e1733a6271 lockd: remove unused code for overriding lock modes
including the allow_override_lock_modes setting.

It was not possible to override default lock modes any longer,
since the command line options had already been removed.

A mechanism will probably be required later that puts part of
this back.
2015-07-06 11:44:28 -05:00
David Teigland
114744cee1 config: rename lock_retries lvmlockd_lock_retries
Because it only applies to lvmlockd requests, but
sounded too general.
2015-07-06 11:44:28 -05:00
David Teigland
fe70b03de2 Add lvmlockd 2015-07-02 15:42:26 -05:00
Peter Rajnoha
a69ded43b0 config: report/time_format appeared in v2.02.123 2015-07-01 08:20:20 +02:00
Peter Rajnoha
89d355ea04 configure: set DEFAULT_FALLBACK_TO_LVM1 in configure and use it in config_settings.h
Just like we have DEFAULT_USE_LVMETAD (or DEFUALT_USE_LVMPOLLD), use
fallback_to_lvm1=1 lvm.conf setting if we configured lvm2 with
--enable-lvm1-fallback and use fallback_to_lvm1=0 otherwise.

Also, generate proper lvm.conf.in with unconfigured value.
2015-06-30 14:09:05 +02:00
Peter Rajnoha
77f0e7a450 cleanup: time: error out on incorrect time_format and indentation in config_settings.h 2015-06-29 16:17:33 +02:00
Peter Rajnoha
125cd06698 conf: make time format configurable
Make it possible to define format for time that is displayed.
The way the format is defined is equal to the way that is used
for strftime function, although not all formatting options as
used in strftime are available for LVM2 - the set is restricted
(e.g. we do not allow newline to be printed). The lvm.conf
comments contain the whole list that LVM2 accepts for time format
together with brief description (copied from strftime man page).

For example:
(defaults used - the format is the same as used before this patch)
$ lvs -o+time vg/lvol0 vg/lvol1
  LV    VG   Attr       LSize Time
  lvol0 vg   -wi-a----- 4.00m 2015-06-25 16:18:34 +0200
  lvol1 vg   -wi-a----- 4.00m 2015-06-29 09:17:11 +0200

(using 'time_format = "@%s"' in lvm.conf - number of seconds
since the Epoch)
$ lvs -o+time vg/lvol0 vg/lvol1
  LV    VG   Attr       LSize Time
  lvol0 vg   -wi-a----- 4.00m @1435241914
  lvol1 vg   -wi-a----- 4.00m @1435562231
2015-06-29 14:30:35 +02:00
Peter Rajnoha
844707067b lvmconfig: do not display settings with undefined default values
Do not display settings with undefined default values, but do display
these settings in case the value is defined directly in any part of
the existing config cascade.

For example, the lvmconfig --type current always displays these settings
(as it's somewhere in "current" configuration cascade that makes it defined).
The lvmconfig --type full displays these settings only if it's defined
somewhere in the cascade, but not if default value is used instead
The lvmconfig --type default never displays these settings...

More concrete example - let's have activation/volume_list directly
set in lvm.conf and activation/read_only_volume_list not set.
Both of these settings have *undefined default* values.

  $lvmconfig --type full activation/volume_list activation/read_only_volume_list
  volume_list="/dev/vg/lv"

(...only volume_list is defined, hence it's printed)

However, the comments will display more info (see also previous commit):

  $lvmconfig --type full activation/volume_list activation/read_only_volume_list --withsummary

  # Configuration option activation/volume_list.
  # Only LVs selected by this list are activated.
  # This configuration option does not have a default value defined.
  # Value defined in existing configuration has been used for this setting.
  volume_list="/dev/vg/lv"

  # Configuration option activation/read_only_volume_list.
  # LVs in this list are activated in read-only mode.
  # This configuration option does not have a default value defined.
2015-06-25 13:51:55 +02:00
Peter Rajnoha
07a34184db lvmconfig: display comment about value from existing config being used
Display comment abour value from existing config being used. For example:

$ lvmconfig --type full --withsummary report/compact_output report/buffered

 # Configuration option report/compact_output.
 # Do not print empty report fields.
 # Value defined in existing configuration has been used for this setting.
 compact_output=1

 # Configuration option report/buffered.
 # Buffer report output.
 buffered=1
2015-06-25 13:51:54 +02:00
Peter Rajnoha
c794c163b5 lvmconfig: add --type full to display full tree of settings
The lvmconfig --type full is actually a combination of --type current
and --type missing together with --mergedconfig options used.

The overall outcome is a configuration tree with settings as LVM sees
it when it looks for the values - that means, if the setting is defined
in some config source (lvm.conf, --config, lvmlocal.conf or any profile
that is used), the setting is used. Otherwise, if the setting is not
defined in any part of the config cascade, the defaults are used.

The --type full displays exactly this final tree with all the values
defined, either coming from configuration tree or from defaults.
2015-06-25 13:33:52 +02:00
Peter Rajnoha
a4724350e4 lvmconfig: add --withspaces option
We shouldn't be adding spaces by default in output as that
may be be used already in scripts and especially for the eval
in shell scripts where spaces are not allowed between key
and value!

Add --withspaces option to lvmconfig for pretty output with
more space in for readability.
2015-06-24 13:19:23 +02:00
Peter Rajnoha
63c5aaaaf2 config: devices/filter and devices/global_filter setting have 'a/.*/' as default value 2015-06-24 11:23:54 +02:00
Peter Rajnoha
c725648f6c config: allow empty values for {thin,cache}_{check,repair}_options
It's not an error to define empty values for
{thin,cache}_{check,repair}_options - such empty value means no
options are passed when these external commands are called.
2015-06-24 11:13:38 +02:00
Peter Rajnoha
20e336f21c configure: add DEFAULT_USE_BLKID_WIPING
If blkid wiping is possible, than set use_blkid_wiping=1 and
use_blkid_wiping=0 otherwise for its default value. If blkid wiping
is disabled during configure and use_blkid_wiping=1 is set by chance,
it's simply ignored - this patch is just a cleanup that makes it more
obvious for the user (we use similar logic for use_lvmetad and
use_lvmpolld settings).
2015-06-24 11:13:38 +02:00
Peter Rajnoha
6575122c63 config: display global/umask in octal form 2015-06-24 11:13:38 +02:00
Peter Rajnoha
74bf75a2f5 config: use proper unconfigured default values for use_lvmetad and use_lvmpolld settings
Default value for lvmetad and lvmpolld has hooks in configure script,
the "lvmconfig --type default --unconfigured" should display:

   use_lvmetad = @DEFAULT_USE_LVMETAD@
   use_lvmpolld = @DEFAULT_USE_LVMPOLLD@

Note that these settings are not of string type. Recent change (the
DM_CONFIG_VALUE_FMT_STRING_NO_QUOTES formatting flag) makes it
possible to recognize that the setting is not of string type and if
there's unconfigured value defined for it, the enclosing " " is
automatically removed on output.
2015-06-24 11:13:38 +02:00
Peter Rajnoha
1545ebf938 config: cleanup default values for some configuration settings with array values
Do not use "#S" (blank string) as default value as that ends up with
'key = [ "" ]' to be generated which is not what we want in most cases.

Also, fix default values for global/{thin,cache}_{check,repair}_options
and avoid assigning blank values. For example, the thin_check_options
had this set as default value previously:

  "#S" DEFAULT_THIN_CHECK_OPTION1 "#S" DEFAULT_THIN_CHECK_OPTION2

If any (or both) of DEFAULT_THIN_CHECK_OPTION* variables was set
to "", we ended up with clumsy default value generated like:

  thin_check_options = [ "-q", "" ]

With this patch, we end up with correct:

  thin_check_options = [ "-q" ]

or, if all options are undefined:

  thin_check_options = [ ]

Which is the correct way to express this.
2015-06-24 11:13:38 +02:00
Peter Rajnoha
9465963faf config: add support for config value formatting flags
There are two basic groups of formatting flags (32 bits):
  - common ones applicable for all config value types (lower 16 bits)
  - type-related formatting flags (higher 16 bits)

With this patch, we initially support four new flags that
modify the the way the config value is displayed:

  Common flags:
  =============

  DM_CONFIG_VALUE_FMT_COMMON_ARRAY - causes array config values
    to be enclosed in "[ ]" even if there's only one item
    (previously, there was no way to recognize an array with one
     item and scalar value, hence array values with one member
     were always displayed without "[ ]" which libdm accepted
     when reading, but it may have been misleading for users)

  DM_CONFIG_VALUE_FMT_COMMON_EXTRA_SPACE - causes extra spaces to
    be inserted in "key = value" (or key = [ value, value, ... ] in
    case of arrays), compared to "key=value" seen on output before.
    This makes the output more readable for users.

  Type-related flags:
  ===================

  DM_CONFIG_VALUE_FMT_INT_OCTAL - prints integers in octal form with
    "0" as a prefix (libdm's config reading code can handle this via
    strtol just fine so it's properly recognized as number in octal
    form already if there's "0" used as prefix)

  DM_CONFIG_VALUE_FMT_STRING_NO_QUOTES - makes it possible to print
    strings without enclosing " "

This patch also adds dm_config_value_set_format_flags and
dm_config_value_get_format_flags functions to set and get
these formatting flags.
2015-06-24 11:13:37 +02:00
Peter Rajnoha
a9bc53d5f3 config: fix some settings incorrectly marked as CFG_DEFAULT_COMMENTED instead of CFG_DEFAULT_UNDEFINED and causing segfault
This patch fixes segfault which was caused by incorrectly marking some
settings CFG_DEFAULT_COMMENTED instead of CFG_DEFAULT_UNDEFINED - the
ones which have NULL default value, hence they're really undefined.
A regression caused by a98ceceb1d.

For example:

$ lvmconfig log/file
file="/a"

Before this patch:

$ lvmconfig --type diff
Segmentation fault (core dumped)

With this patch applied:

$ lvmconfig --type diff
log {
	file="/a"
}

The same applies for these settings:

  log/activate_file
  global/library_dir
  global/system_id_file
  <disk_area>/disk_area_id

There were also other settings with NULL default value and marked as
CFG_DEFAULT_COMMENTED instead of CFG_DEFAULT_UNDEFINED, but they were
cfg_array config settings where the NULL value was not causing segfault
(NULL == empty array).
2015-06-17 13:34:31 +02:00
Alasdair G Kergon
0300730cc9 pre-release 2015-05-15 23:19:29 +01:00
David Teigland
463c86008b config: remove UNDEFINED from cache_pool_cachemode
Replace UNDEFINED with COMMENTED because the code
requires a value to be returned from the config.
2015-05-15 14:24:23 -05:00
David Teigland
850606e9fa config: remove UNDEFINED from thin_pool_discards and thin_pool_zero
Replace UNDEFINED with COMMENTED for these two since
undefined seems to break things.
2015-05-15 14:03:53 -05:00
David Teigland
9f0095fa2c config_settings.h: improve lvmpolld config description 2015-05-15 20:32:51 +02:00
David Teigland
c0d30da609 config: thin_pool_chunk_size_policy should be commented
It is commented in existing example.conf, so leave
that as it was.
2015-05-15 11:43:56 -05:00
David Teigland
b7db994aba config: thin_pool_chunk_size_policy is not undefined
The default policy setting does not depend on any
system/kernel values.
2015-05-15 11:37:16 -05:00
David Teigland
a98ceceb1d config: add comments to match current example.conf
Use CFG_DEFAULT_COMMENTED and CFG_DEFAULT_UNDEFINED to
replicate the existing comments in example.conf.

Fix host_list to be cfg_array.

UNDEFINED is only used if the value depends on other
system/kernel values outside of lvm.  The most common
case is when dm-thin or dm-cache have built-in default
settings in the kernel, and lvm will use those built-in
default values unless the corresponding lvm config setting
is set.

COMMENTED is used to comment out the default setting in
lvm.conf.  The effect is that if the LVM version is
upgraded, and the new version of LVM has new built-in
default values, the new defaults are used by LVM unless
the previous default value was set (uncommented) in lvm.conf.
2015-05-15 10:13:17 -05:00
David Teigland
8081ee1440 config: description can refer to etc location 2015-05-14 09:47:42 -05:00
David Teigland
cf93fe39e3 config: avoid configurable description text
It's just simpler to avoid configurable values in
the description text by rewording to avoid them.
2015-05-14 09:25:48 -05:00
Zdenek Kabelac
b7d80806b6 conf: system_id_source is referencing CONFDIR
Since we allow to configure /etc in configure and compile-in
dir for /etc we need to properly advertise this location later.
2015-05-14 10:52:55 +02:00
Ondrej Kozina
c3d351ec9b new debug class for lvmpolld client code 2015-05-12 17:16:37 +02:00
Zdenek Kabelac
725136b57e configure: use_lvmetad/polld configurable
Configure provides proper settings for
use_lvmetad  and use_lvmpolld  conf setttings.

When the build of polld & lvmetad, these settings
are enabled by default unless explicitelly disabled
with --disable-use-lvmetad/--disable-use-lvmpolld.
2015-05-11 14:36:10 +02:00
Ondrej Kozina
e587b0677b lvmpolld: Add standalone polldaemon.
See doc/lvmpolld_overview.txt
2015-05-09 00:59:18 +01:00
Peter Rajnoha
11e0dc40dc config: add CFG_DEFAULT_COMMENTED to comment out default value on output 2015-04-30 18:26:56 +02:00
Peter Rajnoha
fc65269d68 lvmconfig: add supporting code for handling deprecated settings
This patch adds supporting code for handling deprecated settings.

Deprecated settings are not displayed by default in lvmconfig output
(except for --type current and --type diff). There's a new
"--showdeprecated" lvmconfig option to display them if needed.

Also, when using lvmconfig --withcomments, the comments with info
about deprecation are displayed for deprecated settings and with
lvmconfig --withversions, the version in which the setting was
deprecated is displayed in addition to the version of introduction.

If using --atversion with a version that is lower than the one
in which the setting was deprecated, the setting is then considered
as not deprecated (simply because at that version it was not
deprecated).

For example:

$ lvmconfig --type default activation
activation {
        ...
	raid_region_size=512
        ...
}

$ lvmconfig --type default activation --showdeprecated
activation {
        ...
	mirror_region_size=512
	raid_region_size=512
        ...
}

$ lvmconfig --type default activation --showdeprecated --withversions
activation {
        ...
	# Available since version 1.0.0.
	# Deprecated since version 2.2.99.
	mirror_region_size=512
	# Available since version 2.2.99.
	raid_region_size=512
        ...
}

$ lvmconfig --type default activation --showdeprecated --withcomments
activation {
        ...
	# Configuration option activation/mirror_region_size.
	# This has been replaced by the activation/raid_region_size
	# setting.
	# Size (in KB) of each copy operation when mirroring.
	# This configuration option is deprecated.
	mirror_region_size=512

	# Configuration option activation/raid_region_size.
	# Size in KiB of each raid or mirror synchronization region.
	# For raid or mirror segment types, this is the amount of
	# data that is copied at once when initializing, or moved
	# at once by pvmove.
	raid_region_size=512
        ...
}

$ lvmconfig --type default activation --withcomments --atversion 2.2.98
activation {
       ...
       # Configuration option activation/mirror_region_size.
       # Size (in KB) of each copy operation when mirroring.
       mirror_region_size=512
       ...
}
2015-04-30 17:55:04 +02:00
Peter Rajnoha
5a0197121b config_settings: devices/cache, activation/mirror_region_size and activation/mirror_device_fault_policy are deprecated 2015-04-30 17:39:59 +02:00
Peter Rajnoha
b769183a98 config: preparation for marking configuration nodes as deprecated
A preparatory code for marking configuration nodes as deprecated:
  - struct cfg_def_item gains 2 new fields ("deprecated_since_version" and "deprecation_comment"
  - cfg* macros to handle new fields
  - related config_settings.h edits to add new fields for each item (null for all at the moment)

Patch with implementation will follow...
2015-04-30 15:39:34 +02:00
Peter Rajnoha
9c39d635b6 cleanup: config_settings.h: comments 2015-04-30 14:43:08 +02:00
Peter Rajnoha
25e7178e59 cleanup: config_settings.h: add some comments 2015-04-30 14:28:26 +02:00
Peter Rajnoha
d2c2718c11 lvmconfig: allow --withversions alone with --type list
Before this patch:

$ lvmconfig --type list --withversions --withsummary global/use_lvmetad
global/use_lvmetad - Use lvmetad to cache metadata and reduce disk scanning. [2.2.93]

$ lvmconfig --type list --withversions global/use_lvmetad
global/use_lvmetad

With this patch applied:

$ lvmconfig --type list --withversions --withsummary global/use_lvmetad
global/use_lvmetad - Use lvmetad to cache metadata and reduce disk scanning. [2.2.93]

$ lvmconfig --type list --withversions global/use_lvmetad
global/use_lvmetad - [2.2.93]
2015-04-30 14:18:14 +02:00
Peter Rajnoha
4388ab477c lvmconfig: comment out settings with proper space/tab prefix
We're commenting out settings with undefined default values.
The comment character '#' was printed at the very beginning of
the line, it should be placed just at the beginning of the setting,
after the space/tab prefix is printed.

Before this patch:

  $ lvmconfig --type default activation
  activation {
           ...
  #        volume_list=[]
           ...
  }

With this patch applied:

  $ lvmconfig --type default activation
  activation {
           ...
           # volume_list=[]
           ...
  }
2015-04-30 14:06:55 +02:00
Peter Rajnoha
8b6b90b073 config: consolidate CFG_UNSUPPORTED and CFG_ADVANCED settings
These settings are in the "unsupported" group:

devices/loopfiles
log/activate_file
metadata/disk_areas (section)
metadata/disk_areas/<disk_area> (section)
metadata/disk_areas/<disk_area>/size
metadata/disk_areas/<disk_area>/id

These settings are in the "advanced" group:

devices/dir
devices/scan
devices/types
global/proc
activation/missing_stripe_filler
activation/mlock_filter
metadata/pvmetadatacopies
metadata/pvmetadataignore
metadata/stripesize
metadata/dirs

Also, this patch causes the --ignoreunsupported and --ignoreadvanced
switches to be honoured for all config types (lvmconfig --type).

By default, the --type current and --type diff display unsupported
settings, the other types ignore them - this patch also introduces
--showunsupported switch for all these other types to display even
unsupported settings in their output if needed.
2015-04-29 16:31:47 +02:00
Peter Rajnoha
3be3eb2995 lvmconfig: add --type list and -l|--list
lvmconfig --type list displays plain list of configuration settings.
Some of the existing decorations can be used (--withsummary and
--withversions) as well as existing options/switches (--ignoreadvanced,
--ignoreunsupported, --ignorelocal, --atversion).

For example (displaying only "config" section so the list is not long):

$lvmconfig --type list config
config/checks
config/abort_on_errors
config/profile_dir

$ lvmconfig --type list --withsummary config
config/checks - If enabled, any LVM configuration mismatch is reported.
config/abort_on_errors - Abort the LVM process if a configuration mismatch is found.
config/profile_dir - Directory where LVM looks for configuration profiles.

$ lvmconfig -l config
config/checks - If enabled, any LVM configuration mismatch is reported.
config/abort_on_errors - Abort the LVM process if a configuration mismatch is found.
config/profile_dir - Directory where LVM looks for configuration profiles.

$ lvmconfig --type list --withsummary --withversions config
config/checks - If enabled, any LVM configuration mismatch is reported. [2.2.99]
config/abort_on_errors - Abort the LVM process if a configuration mismatch is found. [2.2.99]
config/profile_dir - Directory where LVM looks for configuration profiles. [2.2.99]

Example with --atversion (displaying global section):

$ lvmconfig --type list global
global/umask
global/test
global/units
global/si_unit_consistency
global/suffix
global/activation
global/fallback_to_lvm1
global/format
global/format_libraries
global/segment_libraries
global/proc
global/etc
global/locking_type
global/wait_for_locks
global/fallback_to_clustered_locking
global/fallback_to_local_locking
global/locking_dir
global/prioritise_write_locks
global/library_dir
global/locking_library
global/abort_on_internal_errors
global/detect_internal_vg_cache_corruption
global/metadata_read_only
global/mirror_segtype_default
global/raid10_segtype_default
global/sparse_segtype_default
global/lvdisplay_shows_full_device_path
global/use_lvmetad
global/thin_check_executable
global/thin_dump_executable
global/thin_repair_executable
global/thin_check_options
global/thin_repair_options
global/thin_disabled_features
global/cache_check_executable
global/cache_dump_executable
global/cache_repair_executable
global/cache_check_options
global/cache_repair_options
global/system_id_source
global/system_id_file

$ lvmconfig --type list global --atversion 2.2.50
global/umask
global/test
global/units
global/suffix
global/activation
global/fallback_to_lvm1
global/format
global/format_libraries
global/segment_libraries
global/proc
global/locking_type
global/wait_for_locks
global/fallback_to_clustered_locking
global/fallback_to_local_locking
global/locking_dir
global/library_dir
global/locking_library
2015-04-29 11:58:14 +02:00
Peter Rajnoha
0ba332e82a refactor: dumpconfig: keep --withcomments to display full comment and use --withsummary for one line summary 2015-04-29 11:14:18 +02:00
David Teigland
6cc37275ce config: improve the description of options lists
Describe
thin_check_options, thin_repair_options,
cache_check_option, scache_repair_options

as a "list of options", rather than a "string of options"
because a single string, e.g. "-q --clear-needs-check-flag"
does not work, and needs to be entered as a list,
e.g. ["-q", "--clear-needs-check-flag"]
2015-04-28 10:06:23 -05:00
Peter Rajnoha
ae0014e2df config: also evaluate default unconfigured values in runtime for 'cfg_runtime' settings
The settings which have their default value evaluated in runtime should
have their 'unconfigured' counterparts also evaluated in runtime since
those values can be constructed by using other settings.

For example, before this patch:

$ lvm dumpconfig --type default --unconfigured devices/cache_dir devices/cache
cache_dir="@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@"
cache="/etc/lvm/cache/.cache

With this patch applied:

$ lvm dumpconfig --type default --unconfigured devices/cache_dir devices/cache
cache_dir="@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@"
cache="@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@/.cache"
2015-04-28 15:36:35 +02:00
Peter Rajnoha
afcf472464 config: make it possible to set default unconfigured_value for settings of all types, not just strings
The @something@ used for unconfigured default value is not bound to
CFG_TYPE_STRING settings defined in config_settings.h, it can be
used for any other config type too.
2015-04-28 15:32:38 +02:00
Peter Rajnoha
de6deec3b8 refactor: rename struct cfg_def_item's 'unconfigured_path' to 'unconfigured_value'
It's not only path that can be used for setting's default value
in unconfigured form as @something@.
2015-04-28 15:30:48 +02:00
David Teigland
cfb0174fed config: fix a couple mistakes with defaults
for archive, archive_dir, and cache
2015-04-27 13:54:45 -05:00
David Teigland
95da21cc18 config: fix check_options array
The code used it as both a single string, and as
an array of strings in different places.  Fix it
so that it's an array of strings everywhere.
2015-04-23 10:35:34 -05:00
David Teigland
a8bdfbe959 config: thin_disabled_features default should be undefined
An array that's empty by default should be flagged as
undefined.
2015-04-23 10:19:00 -05:00
David Teigland
2e035162a1 config: thin_repair_options and cache_repair_options are undefined
By default these are empty strings, so the config settings
should be flagged as undefined, so they will be commented
out of the generated config.  Otherwise, the lines:

thin_repair_options=""
cache_repair_options=""

in the dump output cause a warning when processed since
lvm doesn't want an empty string.

Also regenerate lvm.conf.in.
2015-04-21 16:03:54 -05:00
David Teigland
9b86e8e8f4 dumpconfig: add --ignorelocal
When generating a sample lvm.conf file, we don't want to
include the "local" section, which is kept in lvmlocal.conf.
2015-04-21 14:55:03 -05:00
David Teigland
5cd6381717 dumpconfig: add --unconfigured option
Using this option, default string values that are
configurable are printed as unconfigured values,
e.g. "@CONFDIR@" instead of "/etc".
2015-04-17 11:35:34 -05:00
David Teigland
105c07d1b4 config: edit descriptions
Take some new information and wording from lvm.conf.5.
2015-04-15 14:21:20 -05:00
David Teigland
5f6ac1c812 dumpconfig: add --withfullcomments option
--withfullcomments prints all comment lines for each config option.
--withcomments prints only the first comment line, which should be
a short one-line summary of the option.
2015-04-15 10:56:42 -05:00
David Teigland
6cdab82cf3 config: edit descriptions
Rewording so the first line of the description
works as a single line summary of the option.
2015-04-14 17:00:28 -05:00
David Teigland
fa16c9b7cb config: fix description syntax errors
from previous commit
2015-04-13 13:48:01 -05:00
David Teigland
29220a181a config: update descriptions
- filter, preferred_names
2015-04-13 13:40:11 -05:00
David Teigland
b851b74cba config: editing descriptions
Update wording and formatting.
2015-04-10 16:43:38 -05:00
Peter Rajnoha
463fd954bb config: add note about 'vsn' macro use in config_settings.h 2015-04-10 09:51:08 +02:00
David Teigland
4eaa399b54 config: comments update
missing \n
2015-04-09 16:35:20 -05:00
David Teigland
303c5ba803 config: update description
Remove examples that simply replicate the default shown.
2015-04-09 16:09:53 -05:00
David Teigland
6f3f421228 config: include full comments
Comments from the sample config files are copied into
the comment field of the config settings structure.
This includes only minimal changes to the text.

With this in place, the sample config files can
be generated from 'lvm dumpconfig', and content
for an lvm.conf man page can also be generated.
2015-04-09 15:35:28 -05:00
Alasdair G Kergon
6407d184d1 cache: Store metadata size and checksum.
Refactor the recent metadata-reading optimisation patches.

Remove the recently-added cache fields from struct labeller
and struct format_instance.

Instead, introduce struct lvmcache_vgsummary to wrap the VG information
that lvmcache holds and add the metadata size and checksum to it.

Allow this VG summary information to be looked up by metadata size +
checksum.  Adjust the debug log messages to make it clear when this
shortcut has been successful.

(This changes the optimisation slightly, and might be extendable
further.)

Add struct cached_vg_fmtdata to format-specific vg_read calls to
preserve state alongside the VG across separate calls and indicate
if the details supplied match, avoiding the need to read and
process the VG metadata again.
2015-03-18 23:43:02 +00:00
Zdenek Kabelac
1260b86b2b config: use timestamp with nanosecond precision
Since kernel 2.6 we can use more precise timestamping,
so e.g. we could better recognize configs are slightly
older then generated .cache file.
2015-03-18 13:42:56 +01:00
Zdenek Kabelac
7e7411966a lib: avoid reparsing same metadata
When reading VG mda from multiple PVs - do all the validation only
when mda is seen for the first time and  when mda checksum and length
is same just return already existing VG pointer.

(i.e. using 300PVs for a VG would lead to create and destroy 300 config trees....)
2015-03-06 13:53:12 +01:00
David Teigland
06b408ecce system_id: enable the options in config file and command line 2015-03-05 09:50:43 -06:00
Peter Rajnoha
67c52a4453 config: add CFG_DISABLED flag and mark system_id settings with that flag
If configuration setting is marked in config_setting.h with CFG_DISABLED
flag, default value is always used for such setting, no matter if it's defined
by user (in --config/lvm.conf/lvmlocal.conf).

A warning message is displayed if this happens:

For example:

[1] f21/~ # lvm dumpconfig --validate
  WARNING: Configuration setting global/system_id_source is disabled. Using default value.
  LVM configuration valid.

[1] f21/~ # pvs
  WARNING: Configuration setting global/system_id_source is disabled. Using default value.
  PV         VG     Fmt  Attr PSize   PFree
  /dev/sdb          lvm2 ---  128.00m 128.00m
  ...
2015-03-04 14:08:47 +01:00
Alasdair G Kergon
2fc2928978 config: Rename allow_system_id to extra_system_ids.
Add warnings to the config file templates and briefly document
each value.
Configure lvmlocal.conf and install in /etc/lvm.
2015-02-23 22:19:08 +00:00
Alasdair G Kergon
3d406e5a8d config: Adjust system_id defaults.
Allow cmd->unknown_system_id to be cleared during toolcontext
refresh.
Set a default value of "none" for global/system_id_source.
Allow local/system_id to be empty so it's not impossible for
a later config file to remove it.
2015-02-23 21:20:51 +00:00
Alasdair G Kergon
2a1189ebc3 config: Reinstate recursive tags setting.
In 2.02.99, _init_tags() inadvertently began to ignore the
dm_config_tree struct passed to it.  "tags" sections are not
merged together, so the "tags" section in the main config file was
being processed repeatedly and other "tags" sections were ignored.
2015-02-23 17:40:58 +00:00
Alasdair G Kergon
032c9178ca conf: Set default global/etc from --with-confdir. 2015-02-13 19:10:10 +00:00
David Teigland
8cdec4c434 system_id: use for VG ownership
See included lvmsystemid(7) for full description.
2015-02-13 10:10:27 -06:00
Peter Rajnoha
cc755853c2 config: fix version of introduction for devices/external_device_info_source (v115->v116) 2015-02-12 09:30:40 +01:00
Peter Rajnoha
1c7a509bed filters: add firmware RAID filter
Just like MD filtering that detects components of software RAID (md),
add detection for firmware RAID.

We're not adding any native code to detect this - there are lots of
firmware RAIDs out there which is just out of LVM scope. However,
with current changes with which we're able to get device info from
external sources (e.g. external_device_info_source="udev"), we can
do this easily if the external device status source has this kind
of information - which is the case of "udev" source where the results
of blkid scans are stored.

This detection should cover all firmware RAIDs that blkid can detect and
which are identified as:
  ID_FS_TYPE = {adaptec,ddf,hpt45x,hpt37x,isw,jmicron,lsi_mega,nvidia,promise_fasttrack,silicon_medley,via}_raid_member
2015-01-30 13:17:12 +01:00
Peter Rajnoha
bf8943b0f6 conf: add devices/external_device_info_source to lvm.conf 2015-01-30 13:01:12 +01:00
Peter Rajnoha
bea003e94c config: improve config validation to check if setting with string value can be empty.
For example, with dmeventd/executable set to "" which is not allowed for
this setting, the config validation now ends up with:

$ lvm dumpconfig --validate
  Configuration setting "dmeventd/executable" invalid. It cannot be set to an empty value.
  LVM configuration invalid.

This check for empty values for string config settings was not
done before (we only checked empty arrays, but not scalar strings).
2015-01-21 16:44:02 +01:00
Zdenek Kabelac
2908ab3eed thin: errrorwhenfull support
Support error_if_no_space feature for thin pools.
Report more info about thinpool status:
(out_of_data (D), metadata_read_only (M), failed  (F) also as health
attribute.)
2015-01-14 14:52:05 +01:00
Peter Rajnoha
00d53d5fc1 config: add report/compact_output lvm.conf setting to enable or isable field compacting
$ lvm dumpconfig report/compact_output
compact_output=0

$ lvs vg
  LV    VG   Attr       LSize Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  lvol0 vg   owi-a-s--- 4.00m
  lvol1 vg   -wi-a----- 4.00m
  lvol2 vg   swi-a-s--- 4.00m      lvol0  0.00

$ lvm dumpconfig report/compact_output
compact_output=1

$ lvs vg
  LV    VG   Attr       LSize Origin Data%
  lvol0 vg   owi-a-s--- 4.00m
  lvol1 vg   -wi-a----- 4.00m
  lvol2 vg   swi-a-s--- 4.00m lvol0  0.00
2014-12-05 12:00:28 +01:00
Zdenek Kabelac
20b22cd023 libdm: still better API
Do not use 'any' policy name as a value in config tree - so we stick
with 'policy_settings' and extra 'policy_name' for libdm params.

Update lvm2 API as well.

Example of supported metadata:

 policy = "mq"
 policy_settings {
      migration_threshold = 2048
      sequential_threshold = 512
      random_threshold = 4
      read_promote_adjustment = 10
 }
2014-11-11 00:54:03 +01:00
Zdenek Kabelac
e0164f2188 sparse: configurable type for sparse volumes
Support compile type configurable defaults for creation
of sparse volumes.

By default now create 'thin-pools' for sparse volumes.
Use the global/sparse_segtype_default to switch back to old
snapshots if needed.

Apply the same compile logic for newly introduces mirror/raid1 options.
2014-10-30 23:58:48 +01:00
Zdenek Kabelac
11ea72cfd8 mirror: extra parsing for mirrorlog arg
Put validation of mirrorlog arg into a separate function.
2014-10-24 16:39:32 +02:00
David Teigland
17ab39f743 cache: include cache mode in vg metadata and display
The cache mode of a new cache pool is always explicitly
included in the vg metadata.  If a cache mode is not
specified on the command line, the cache mode is taken
from lvm.conf allocation/cache_pool_cachemode, which
defaults to "writethrough".

The cache mode can be displayed with lvs -o+cachemode.
2014-10-02 11:17:41 -05:00
Peter Rajnoha
f0cafc9281 conf: add allocation/physical_extent_size config option for default PE size of VGs.
Removes a need to use "vgcreate -s <desired PE size>" all the
time time just to override hardcoded default which is 4096KiB.
2014-09-12 10:09:21 +02:00
Zdenek Kabelac
3b5afac9b4 cleanup: use unsigned 1bit elements
Avoid using signed 'int' type for 1 bit size.
2014-08-26 14:13:06 +02:00
Zdenek Kabelac
e5356eeba1 cleanup: never return uninitialized buffer
Coverity noticed this function may return untouched buffer,
however in this state can't really happen, but anyway
ensure on error path the buffer will have zero lenght string.
2014-08-26 14:13:06 +02:00
Zdenek Kabelac
894eda4707 thin and cache: unify pool common code
Fix get_pool_params to only read params.
Add poolmetadataspare option to get_pool_params.
Move all profile code into update_pool_params.
Move recalculate code into pool_manip.c
2014-07-22 22:41:38 +02:00
Zdenek Kabelac
f9d80c9d31 cache: add tool support
Introducing cache tool support.
2014-07-11 12:47:35 +02:00
Peter Rajnoha
d169ff1e03 conf: add report/list_item_separator lvm.conf option
For example:

$ lvm dumpconfig report/list_item_separator
list_item_separator=","

$ lvs -o name,tags vg/lvol1
  LV    LV Tags
  lvol1 a,x,y

$ lvm dumpconfig report/list_item_separator
list_item_separator=":"

$ lvs -o name,tags vg/lvol1
  LV    LV Tags
  lvol1 ay
2014-07-10 16:18:45 +02:00
Jonathan Brassow
be75076dfc activation: Add "degraded" activation mode
Currently, we have two modes of activation, an unnamed nominal mode
(which I will refer to as "complete") and "partial" mode.  The
"complete" mode requires that a volume group be 'complete' - that
is, no missing PVs.  If there are any missing PVs, no affected LVs
are allowed to activate - even RAID LVs which might be able to
tolerate a failure.  The "partial" mode allows anything to be
activated (or at least attempted).  If a non-redundant LV is
missing a portion of its addressable space due to a device failure,
it will be replaced with an error target.  RAID LVs will either
activate or fail to activate depending on how badly their
redundancy is compromised.

This patch adds a third option, "degraded" mode.  This mode can
be selected via the '--activationmode {complete|degraded|partial}'
option to lvchange/vgchange.  It can also be set in lvm.conf.
The "degraded" activation mode allows RAID LVs with a sufficient
level of redundancy to activate (e.g. a RAID5 LV with one device
failure, a RAID6 with two device failures, or RAID1 with n-1
failures).  RAID LVs with too many device failures are not allowed
to activate - nor are any non-redundant LVs that may have been
affected.  This patch also makes the "degraded" mode the default
activation mode.

The degraded activation mode does not yet work in a cluster.  A
new cluster lock flag (LCK_DEGRADED_MODE) will need to be created
to make that work.  Currently, there is limited space for this
extra flag and I am looking for possible solutions.  One possible
solution is to usurp LCK_CONVERT, as it is not used.  When the
locking_type is 3, the degraded mode flag simply gets dropped and
the old ("complete") behavior is exhibited.
2014-07-09 22:56:11 -05:00
Peter Rajnoha
da545ce3b4 tools: add --binary arg to pvs,vgs,lvs and {pv,vg,lv}display -C and report/binary_values_as_numeric lvm.conf option
The --binary option, if used, causes all the binary values reported
in reporting commands to be displayed as "0" or "1" instead of descriptive
literal values (value "unknown" is still used for values that could not be
determined).

Also, add report/binary_values_as_numeric lvm.conf option with the same
functionality as the --binary option (the --binary option prevails
if both --binary cmd option and report/binary_values_as_numeric lvm.conf
option is used at the same time). The report/binary_values_as_numeric is
also profilable.

This makes it easier to use and check lvm reporting command output in scripts.
2014-07-04 15:40:17 +02:00
Zdenek Kabelac
86e116450e cleanup: drop unneeded initialization
Code assigns this variable right after clearing.
2014-07-04 12:31:17 +02:00
Peter Rajnoha
3208396ce5 coverity: fix issues reported by coverity 2014-06-24 14:58:53 +02:00
Peter Rajnoha
9c937e7d54 dumpconfig: add --type profilable-command/profilable-metadata, --metadataprofile/--commandprofile
The dumpconfig now understands --commandprofile/--profile/--metadataprofile

The --commandprofile and --profile functionality is almost the same
with only one difference and that is that the --profile is just used
for dumping the content, it's not applied for the command itself
(while the --commandprofile profile is applied like it is done for
any other LVM command).

We also allow --metadataprofile for dumpconfig - dumpconfig *does not*
touch VG/LV and metadata in any way so it's OK to use it here (just for
dumping the content, checking the profile validity etc.).

The validity of the profile can be checked with:
      dumpconfig --commandprofile/--profile/--metadataprofile --validate

...depending on the profile type.

Also, mention --config in the dumpconfig help string so users know
that  dumpconfig handles this too (it did even before, but it was not
documented in the help string).
2014-05-20 16:27:07 +02:00
Peter Rajnoha
9e3e4d6994 config: differentiate command and metadata profiles and consolidate profile handling code
- When defining configuration source, the code now uses separate
  CONFIG_PROFILE_COMMAND and CONFIG_PROFILE_METADATA markers
  (before, it was just CONFIG_PROFILE that did not make the
  difference between the two). This helps when checking the
  configuration if it contains correct set of options which
  are all in either command-profilable or metadata-profilable
  group without mixing these groups together - so it's a firm
  distinction. The "command profile" can't contain
  "metadata profile" and vice versa! This is strictly checked
  and if the settings are mixed, such profile is rejected and
  it's not used. So in the end, the CONFIG_PROFILE_COMMAND
  set of options and CONFIG_PROFILE_METADATA are mutually exclusive
  sets.

- Marking configuration with one or the other marker will also
  determine the way these configuration sources are positioned
  in the configuration cascade which is now:

  CONFIG_STRING -> CONFIG_PROFILE_COMMAND -> CONFIG_PROFILE_METADATA -> CONFIG_FILE/CONFIG_MERGED_FILES

- Marking configuration with one or the other marker will also make
  it possible to issue a command context refresh (will be probably
  a part of a future patch) if needed for settings in global profile
  set. For settings in metadata profile set this is impossible since
  we can't refresh cmd context in the middle of reading VG/LV metadata
  and for each VG/LV separately because each VG/LV can have a different
  metadata profile assinged and it's not possible to change these
  settings at this level.

- When command profile is incorrect, it's rejected *and also* the
  command exits immediately - the profile *must* be correct for the
  command that was run with a profile to be executed. Before this
  patch, when the profile was found incorrect, there was just the
  warning message and the command continued without profile applied.
  But it's more correct to exit immediately in this case.

- When metadata profile is incorrect, we reject it during command
  runtime (as we know the profile name from metadata and not early
  from command line as it is in case of command profiles) and we
  *do continue* with the command as we're in the middle of operation.
  Also, the metadata profile is applied directly and on the fly on
  find_config_tree_* fn call and even if the metadata profile is
  found incorrect, we still need to return the non-profiled value
  as found in the other configuration provided or default value.
  To exit immediately even in this case, we'd need to refactor
  existing find_config_tree_* fns so they can return error. Currently,
  these fns return only config values (which end up with default
  values in the end if the config is not found).

- To check the profile validity before use to be sure it's correct,
  one can use :

    lvm dumpconfig --commandprofile/--metadataprofile ProfileName --validate

  (the --commandprofile/--metadataprofile for dumpconfig will come
   as part of the subsequent patch)

- This patch also adds a reference to --commandprofile and
  --metadataprofile in the cmd help string (which was missing before
  for the --profile for some commands). We do not mention --profile
  now as people should use --commandprofile or --metadataprofile
  directly. However, the --profile is still supported for backward
  compatibility and it's translated as:

    --profile == --metadataprofile for lvcreate, vgcreate, lvchange and vgchange
                 (as these commands are able to attach profile to metadata)

    --profile == --commandprofile for all the other commands
                (--metadataprofile is not allowed there as it makes no sense)

- This patch also contains some cleanups to make the code handling
  the profiles more readable...
2014-05-20 16:21:48 +02:00
Peter Rajnoha
c5fbd2c59f config: add CFG_PROFILABLE_METADATA flag
Mark profilable settings with a separate CFG_PROFILABLE_METADATA
flag where the profile can be attached to VG/LV. This makes it possible
to differentiate global command-profilable settings (CFG_PROFILABLE flag)
and contextual metadata-profilable (per VG/LV) settings (CFG_PROFILABLE_METADATA flag).
2014-05-19 16:31:15 +02:00