1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

782 Commits

Author SHA1 Message Date
Zdenek Kabelac
ed5e5c38b5 tests: skip thin-flags test on 32bit el6 kernel
Until kernel is fixed, stop running test always hitting OOPS there.
2016-02-22 14:59:28 +01:00
Zdenek Kabelac
a89ddda1a2 tests: needs_check needs version 16
Skip part of test when driver is too old.
2016-02-18 18:11:29 +01:00
Zdenek Kabelac
bcf7f80791 tests: checking thin flags
Test various  (D/M/F) attrs for thin-pool/thin
2016-02-18 16:49:38 +01:00
Peter Rajnoha
ecfa465366 metadata: ask for confirmation before really initializing/removing PV that is marked as belonging to a VG
Ask for confirmation when using pvcreate/pvremove on a PV which is
marked as belonging to a VG, just like we do in case of a PV which
belongs to known VG:

$ pvcreate -ff /dev/sda
Really INITIALIZE physical volume "/dev/sda" that is marked as belonging to a VG [y/n]? n
  /dev/sda: physical volume not initialized

$ pvremove -ff /dev/sda
Really WIPE LABELS from physical volume "/dev/sda" that is marked as belonging to a VG [y/n]? n
  /dev/sda: physical volume label not removed
2016-02-18 14:33:54 +01:00
Peter Rajnoha
8ad93874d6 tests: fix tests checking pv_attr - there's a new bit now 2016-02-15 12:44:46 +01:00
Peter Rajnoha
a4e25f4381 tests: add pv-ext-flags.sh test
Testing PV extension flags. Currently, there's only one PV extension
flag present - the PV_EXT_USED flag (marking PV as used in a VG).
2016-02-15 12:44:46 +01:00
Peter Rajnoha
672deaebc5 man: pvresize: remove old comment about inability to resize PV with more mdas 2016-02-12 16:29:47 +01:00
Zdenek Kabelac
337aa4ca8e tests: indent
Better bash indention
2016-02-12 11:59:42 +01:00
Zdenek Kabelac
a077a64983 tests: update test
Upgrade test to count with much faster dmeventd work thanks
to low_watter_mark support.

Fix some wrong tests.
2016-02-12 10:21:07 +01:00
Zdenek Kabelac
ba111e7f4a tests: check for automated dmeventd resize
Watermark support should handle relatively quickly data LV resizes.
So check if it does what is expected.
2016-02-11 18:38:40 +01:00
Peter Rajnoha
bc8f8ac0fa tests: add pv-check-dev-size.sh 2016-01-22 14:16:00 +01:00
Zdenek Kabelac
fcbef05aae doc: change fsf address
Hmm rpmlint suggest fsf is using a different address these days,
so lets keep it up-to-date
2016-01-21 12:11:37 +01:00
Peter Rajnoha
fccb1bb276 report: make devices, metadata_devices, seg_pe_ranges and seg_metadata_le_ranges fields consistent
There are two basic groups of fields for LV segment device reporting:
  - related to LV segment's devices: devices and seg_pe_ranges
  - related to LV segment's metadata devices: metadata_devices and seg_metadata_le_ranges

The devices and metadata_devices report devices in this format:
    "device_name(extent_start)"

The seg_pe_ranges and seg_metadata_le_ranges report devices in
this format:
    "device_name:extent_start-extent_end"

This patch reverts partly what commit 7f74a99502
(v 2.02.140) introduced in this area - it added [] for
hidden devices to mark them for all four fields mentioned above.

We won't be marking hidden devices in devices and metadata_devices
fields.

The seg_metadata_le_ranges field will have hidden devices marked -
it's new enough that we don't need to care about compatibility much
yet.

The seg_pe_ranges is old enough that we shouldn't be changing this
one - so we're reverting to not marking hidden devices here.
Instead, there's going to be a new field "seg_le_ranges" which
is going to replace the seg_pe_ranges and it will mark hidden devices -
this is going to be introduced in a patch later.

So in the end we'll end up with:

   (LV segment's devices)
   devices field with "device_name(extent_start)" format, not marking hidden devices
   seg_pe_ranges field with "device_name:extent_start-extent_end" format, not marking hidden devices (deprecated, new seg_le_ranges should be used instead for standardized format)
   seg_le_ranges field with "device_name:extent_start-extent_end" format, marking hidden devices

   (LV segment's metadata devices)
   metadata_devices field with "device_name:extent_start-extent_end" format, not marking hidden devices
   seg_metadata_le_ranges field with "device_name:extent_start-extent_end" format, marking hidden devices

Also, both seg_le_ranges and seg_metadata_le_ranges will honour the
report/list_item_separator setting which can be used to configure
the delimiter used for list items.

So, to sum it up, we will recommend using the new seg_le_ranges and
seg_metadata_le_ranges fields because they display devices with
standard extent range format, they can mark hidden devices and they
honour the report/list_item_separator setting.

We'll be keeping devices,seg_pe_ranges and metadata_devices fields
for compatibility.
2016-01-19 14:30:20 +01:00
Peter Rajnoha
b82d5ee092 report: add kernel_discards report field to display thin pool discard used in kernel
Thin pool discard mode set in metadata can be different from the one
actually used if any device underneath does not support that mode. Add
kernel_discard report field to make it possible to see this difference.
2016-01-14 16:54:12 +01:00
Peter Rajnoha
1417ed304b cleanup: rename 'invisible devices' to 'hidden devices' 2016-01-13 15:22:46 +01:00
Peter Rajnoha
efab21b411 test: add report-invisible.sh test 2016-01-13 14:37:09 +01:00
Peter Rajnoha
c66a83fdc3 tests: update tests to deal with invisible devices consistently 2016-01-13 13:55:24 +01:00
Ondrej Kozina
1a3ee6402e test: conditional skip of auto-activation bg polling test
if dm-snapshot-merge target not present skip whole test
2016-01-12 13:32:23 +01:00
Ondrej Kozina
d09246a07d test: add test for autoactivation regression
add test for a regression fixed in
40701af969
2016-01-12 11:40:43 +01:00
Zdenek Kabelac
07b9147ced tests: check lvrename of stacked cache pool 2015-12-11 20:15:57 +01:00
Zdenek Kabelac
0688dbbc53 tests: fix logging
Actually  file redirection must be before stderr redir.
2015-12-10 21:01:24 +01:00
Zdenek Kabelac
fedf15ffb0 tests: extend test 2015-12-04 22:10:30 +01:00
Zdenek Kabelac
89418c1253 tests: check read-only backup archive 2015-12-03 18:17:45 +01:00
Zdenek Kabelac
a220939d9e tests: data correctness after thin-pool resize 2015-11-24 11:29:27 +01:00
Zdenek Kabelac
da50f8bee6 tests: more cache conversion checks 2015-11-19 14:40:49 +01:00
Peter Rajnoha
0a2cadf6b8 libdm: report: consolidate use of string list selection structures 2015-11-18 10:54:09 +01:00
David Teigland
7b11ef6de0 tests: update lvmcache-exercise
To handle multiple VGs with the same name.
Simply using the VG name is ambiguous, and
lvmetad requires the VG uuid be used to
specify which one is meant.
2015-11-17 12:12:17 -06:00
Zdenek Kabelac
e31f4b76f4 cache: handle older metadata format
When reading older lvm2 metadata for cache-pool - we now handle more
extended syntax - basically we want to enter most setting when
actually creating cached LV.

For this new validation code has been added. However older metadata
without new settings set is now found as invalid.

Fix it by adding default settings for  cache policy  mq
and cache mode  writethrough.
2015-11-16 01:12:57 +01:00
David Teigland
e425bce281 tests: allow lvmetad tests with duplicate VG names 2015-11-13 15:09:26 -06:00
Zdenek Kabelac
ea1814cea8 tests: without delay_dev skip some checks
When delay_dev is missing these tests are just racy.
2015-11-13 11:17:07 +01:00
Zdenek Kabelac
a0cb92cbb1 tests: handle missing delay_dev
Try to run as much of test which could run without delay_dev.
2015-11-09 19:07:53 +01:00
Zdenek Kabelac
7103012754 tests: update test to check for race better
Use  delay_dev to slow down mirror sync so we could more
easily check for race and proper reject of parallel mirror
leg addition/reduction.

Also expose fail in mirror allocation of parallel leg.
2015-11-09 12:21:17 +01:00
David Teigland
b9341e36f1 test: disable duplicate VG name test for lvmetad
Until we decide how duplicate VG names should be
handled by lvmetad, and implement that.
2015-11-06 15:58:22 -06:00
David Teigland
19feda2c95 tests: skip duplicate vg names test with lvmetad
If two PVs have different VGs with the same name
(different uuids), one of the VGs is ignored by
lvmetad.  A FIXME exists in lvmetad to find a
better response.
2015-11-03 13:25:35 -06:00
Alasdair G Kergon
15a97cc610 pre-release 2015-10-30 15:34:00 +00:00
Peter Rajnoha
5b04eda93f tests: add report-fields.sh test 2015-10-30 15:47:56 +01:00
Peter Rajnoha
9a3b64e81a tests: add test for minimum mda size 2015-10-30 10:02:00 +01:00
Zdenek Kabelac
28e54032c0 tests: update test for resize
Drop already tested 'threshold & create' which is in
lvextend-thin-full.sh

Count with now match faster 'dmeventd' wakeup on watermark
as it's now nearly instant after crossing threshold value.
2015-10-29 15:11:16 +01:00
Ondrej Kozina
bca55c9b20 tests: replace invalid use of 'fail' with 'die' 2015-10-29 13:30:29 +01:00
Zdenek Kabelac
f104a81932 tests: let pass bigger readahead
If the underlaying device has actually bigger read-ahead settings,
let it pass.
But anyway switch to 512 strip-size to get really high R-A sector count.
2015-10-29 12:39:07 +01:00
Zdenek Kabelac
3720eb63be tests: fix wrong line has been commented 2015-10-29 12:39:07 +01:00
Zdenek Kabelac
8b5525383f tests: no point in using should
lvmetad does not support lvm1 - so expect failure.
2015-10-29 12:39:07 +01:00
Zdenek Kabelac
4159680a0e tests: use more SKIP
Speed-up check_lvmpolld.
2015-10-27 16:00:09 +01:00
Zdenek Kabelac
3b5939bbbb tests: use skip flags
corrected usage of skip flags.
2015-10-27 00:45:37 +01:00
Zdenek Kabelac
b29593378f tests: snapshot now respects threshold 2015-10-26 07:38:23 +01:00
Ondrej Kozina
ef4d69f456 tests: add lvmetad shutdown on idle test 2015-10-20 15:45:28 +02:00
Ondrej Kozina
392248186e tests: add test for missing mirror in-sync info 2015-10-20 12:19:02 +02:00
Zdenek Kabelac
acc70de439 tests: more extend testing 2015-10-13 16:02:21 +02:00
Zdenek Kabelac
cf1c2da836 tests: wait for initial sync
Raid should be in-sync ATM for any gaming.
2015-10-13 16:02:21 +02:00
Peter Rajnoha
5bd63df237 tests: test vgimportclone and -n option 2015-10-12 12:55:39 +02:00
Zdenek Kabelac
4c2cc782aa tests: ensure test will not block
This test is somewhat 'stupid' and simulates mostly unsupported
situation - so avoid blocking here.
2015-10-01 16:45:14 +02:00
Zdenek Kabelac
05e7fdd5ce tests: use proper target name for check 2015-10-01 16:05:51 +02:00
Alasdair G Kergon
7097663ddd test: Cope with stripe rounding message change. 2015-09-28 12:25:31 +01:00
Zdenek Kabelac
47f623d64b tests: update removal test
Test is currently checking a very non-standard use case.
Make it a more resistent against being blocked in kernel.
2015-09-22 00:08:45 +02:00
Zdenek Kabelac
83a52c07b7 tests: check dmsetup remove --force 2015-09-18 17:45:46 +02:00
Zdenek Kabelac
7d1dd5f52d tests: use remount-ro for extfs
Avoid showing kernel warn of umounting broken fs.
2015-09-18 17:45:46 +02:00
Peter Rajnoha
b5022102bb libdm: report: make it possible to use blank value as selection for string list report field
$ lvs -o name,tags vg
  LV    LV Tags
  lvol0
  lvol1 mytag

Before this patch:
$ lvs -o name,tags vg -S 'tags=""'
  Failed to parse string list value for selection field lv_tags.
  Selection syntax error at 'tags=""'.
  Use 'help' for selection to get more help.

(and the same for -S 'tags={}' and -S 'tags=[]')

With this patch applied:
$ lvs -o name,tags vg -S 'tags=""'
  LV    LV Tags
  lvol0

(and the same for -S 'tags={}' and -S 'tags=[]')
2015-09-17 10:19:15 +02:00
Zdenek Kabelac
cee9ed2244 tests: early check for snapshot-merge 2015-09-14 20:18:54 +02:00
Zdenek Kabelac
e7e15631dd tests: lvextend of full thin pool 2015-09-14 20:18:54 +02:00
Zdenek Kabelac
226e7d7b3c tests: wait for sync before deactivation
On slower machine/disk, sync may block udev from reading and may prevent
deactivation.
2015-09-11 21:52:27 +02:00
Zdenek Kabelac
cd2e4310b3 tests: new thin tests 2015-09-11 21:52:27 +02:00
Zdenek Kabelac
54c982081f tests: check cache stripe and raid behavior
Somehow raid tests landed in plain cache - separte them out
so they properly check for  have_raid.

Check we do not support strip option with cache-pool creation.
2015-09-10 17:28:47 +02:00
Zdenek Kabelac
5911fa1d91 cache: warn if caching causes troubles
Certain stacks of cached LVs may have unexpected consequences.
So add a warning function called when LV is cached to detect
such caces and WARN user about them - the best we could do ATM.
2015-09-10 17:27:30 +02:00
Zdenek Kabelac
587fd6a0e4 tests: ensure dd flushed all data before exit 2015-09-08 15:41:34 +02:00
Zdenek Kabelac
6cb7f21e38 tests: better check for compiled version
Use install /lib files to check for expected version.
2015-09-08 15:41:34 +02:00
Zdenek Kabelac
5da497d0a8 tests: update thin test
Use slightly better values
2015-09-03 23:34:37 +02:00
Zdenek Kabelac
dc261f17e9 tests: use conv=fdatasync
Should be slightly better to flushed before dd exits
instead of using direct IO.
2015-09-03 23:34:37 +02:00
Zdenek Kabelac
d0ff35c5a6 tests: update cache tests 2015-08-26 11:24:41 +02:00
David Teigland
ba898b9ab6 tests: fix check for lvmlockd test 2015-08-21 17:00:21 -05:00
David Teigland
d827dd8b05 tests: add test for lvmlockd lock_args 2015-08-21 15:09:38 -05:00
David Teigland
1f27c9f6a4 tests: create/remove improvements for lvmlockd testing 2015-08-21 15:09:38 -05:00
David Teigland
d310e1f907 test: allow tests with lvmlockd 2015-08-21 15:09:38 -05:00
Zdenek Kabelac
1c811bfcd9 tests: check cachepolicy with lvconvert 2015-08-21 15:35:45 +02:00
David Teigland
c09dad71fb tests: fix lockd options in sanlock-prepare 2015-08-18 15:06:49 -05:00
Zdenek Kabelac
77357081c8 tests: update thin test
Since we now let pass activation of thin-pool 'off-by-one' for
plain 'vgchange -ay' update the test to use higher TID.
2015-08-17 17:07:09 +02:00
Zdenek Kabelac
a606966029 tests: Revert update for new thin pool messaging
This reverts commit 3dbb9a57ca.
Original code is back as the code restored previous TID handling.
2015-08-17 11:25:03 +02:00
Zdenek Kabelac
c2d814e78d tests: keep testing mq policy
Tests were written for 'mq' policy, so disable smq.
2015-08-12 14:33:16 +02:00
Alasdair G Kergon
c7fc06a262 test: Ignore known concurrent VG clvmd failure.
Don't abort test when clvmd processes two VGs concurrently.
  CLVMD: ioctl/libdm-iface.c:1940   Internal error: Performing unsafe table load while 3 device(s) are known to be suspended:  (253:19)
2015-07-17 12:56:52 +01:00
Zdenek Kabelac
4a33d57143 thin: fix warning for overprovisioning
When lvm.conf is properly configure for auto resize of overprovisioned
thin-pool volume, avoid showing any warning (2.02.124).
2015-07-15 13:10:21 +02:00
Zdenek Kabelac
bfd0689d64 tests: use old snapshot for huge volumes
Avoid stacking thins over thins.
2015-07-07 09:57:32 +02:00
Jonathan Brassow
4daea88516 clean-up: typos s/bellow/below/ 2015-07-06 10:15:11 -05:00
Zdenek Kabelac
3dbb9a57ca tests: update for new thin pool messaging 2015-07-03 16:13:15 +02:00
Zdenek Kabelac
622064f00f thin: check for overprovisioning 2015-07-03 16:13:14 +02:00
David Teigland
fe70b03de2 Add lvmlockd 2015-07-02 15:42:26 -05:00
Peter Rajnoha
eaa0d927a4 tests: add test for 454782f (select with synonyms for string field types) 2015-07-02 11:46:58 +02:00
Zdenek Kabelac
02767c5eb1 tests: tests needs pre 1.13 thin-pool extorg
This test is testing older style, so disable feature when present.
2015-06-26 22:16:01 +02:00
Zdenek Kabelac
03c4fee5a7 tests: deactivate before remove
Testing if this avoids udev race with removal of snapshot on some
test machines.
See: https://bugzilla.redhat.com/show_bug.cgi?id=1217819
2015-06-26 22:11:46 +02:00
Zdenek Kabelac
44c7bc0262 tests: workaround udev problem
If udev has not removed 'dir' entry - just issue TEST WARNING, clear
dir, but do not fail whole rest of test.
2015-06-24 15:19:53 +02:00
Zdenek Kabelac
4c6b3f5ec3 tests: use vgscan after enable_dev
Since our test environment runs also in non-real-udev world,
it's using  /etc/.cache file with scanned files.

So in this case it is mandatory the user runs 'vgscan'
after a device reappears in the system.

This 'first' lvm2 command then fixes metadata (just like vgs did).
2015-06-23 13:39:57 +02:00
Zdenek Kabelac
7ee3ccd826 tests: newer version needed for ext-orig 2015-06-23 11:56:42 +02:00
Zdenek Kabelac
b45e9183bc tests: external origin updates
Update test for recent updates to support unalligned sizes
and extension of reduced volume.
2015-06-19 16:33:29 +02:00
Zdenek Kabelac
a3e0d830bd thin: support unaligned size of external origin and thin pool
With thin-pool kernel target module 1.13 it's now support usage of
external origin with sizes which are not 'alligned' with chunk size
of thin-pool.

Enable lvm2 support for this and also fix reporting of data_percent
usage for case sizes are not alligned.
2015-06-18 18:50:36 +02:00
Petr Rockai
9c0049b1ce test: Ensure that outdated PVs are wiped just once. 2015-06-10 16:27:59 +02:00
Ondrej Kozina
da20e0c507 tests: add test for pvscan --cache --background
regression test for a segfault in pvscan --cache --background
bug fixed by commit:
f8bf641095
2015-05-25 10:48:45 +02:00
David Teigland
e27182249a tests: add test for duplicate pvs 2015-05-19 11:02:53 -05:00
Zdenek Kabelac
0cb9df3cec tests: fix calcucaltion
Code works properly.
2015-05-18 12:45:43 +02:00
Zdenek Kabelac
caaca15854 tests: thin_restore not needed
Few more test which could live without thin_restore.
2015-05-18 12:45:42 +02:00
Zdenek Kabelac
76cc477fba tests: no warn if test does not need thin_repair
Set LVM_TEST_THIN_REPAIR_CMD to /bin/false for test which
doesn't need it.

This way - even if on the system there is no such tool present,
test will not result with warning about missing tool.

Also remove from Makefile settings of TEST vars which are set in
through /lib/paths  - this also allows to override them in test.
2015-05-17 20:24:36 +02:00
Zdenek Kabelac
a42c1c5728 tests: respect @CONFDIR@/machine-id
Obtain location of machine-id.

NOTE: lvmconfig cannot dump 'life' value - should be fixed.
2015-05-14 10:52:55 +02:00
Zdenek Kabelac
57a16abe2c tests: do not use |&
Bash 3.2  doesn't understand this syntax (i.e. RHEL5).
And it's even better - reports syntax error and return success.
2015-05-14 10:52:55 +02:00
Ondrej Kozina
2ec51e6185 tests: remove forgotten -vvvv option 2015-05-12 17:16:54 +02:00
Zdenek Kabelac
e3ccf98023 tests: missed conversion
Assuming it should test same number as other functions.
2015-05-09 09:17:26 +02:00
Ondrej Kozina
e587b0677b lvmpolld: Add standalone polldaemon.
See doc/lvmpolld_overview.txt
2015-05-09 00:59:18 +01:00
Zdenek Kabelac
1d832aef09 tests: missing vg 2015-05-08 21:00:10 +02:00
Zdenek Kabelac
05934d2538 format_text: properly validate PV size for restore
Use 64bit arithmentic for PV size calculation (Coverity).

Also remove sector shift for compared PV size, since all
values are already held in sectors.

This fixes validatio of PV size when restoring PV
from vg metadata backup file.
2015-05-08 15:12:35 +02:00
Ondrej Kozina
5bbf083cd1 tests: do not restart lvmetad when not necessary
overlooked pvmove-restart test during cleanup
2015-05-06 15:20:11 +02:00
Zdenek Kabelac
7a5a4f952e tests: play better with mdadm
Manage mdadm devices on older distros is a challange.
2015-05-04 13:11:41 +02:00
Zdenek Kabelac
2d10a6f6ae tests: check for open_count
Instead of checking /proc/mounts check for open_count of snap device.
Parallel umount has race, so check for open_count.
2015-05-04 10:18:44 +02:00
Zdenek Kabelac
7a588bce7b tests: drop extra scsi init
Use first test also for checking the support is there -
avoid one extra unnecessary scsi_debug reload.
2015-05-04 10:17:48 +02:00
Zdenek Kabelac
c90ee0414d tests: check for clvmd process entry
Instead of checking just for pid file - rather check
for process  - since there could be slight race, the
pid file is gone, but process still exists.
2015-05-04 10:16:33 +02:00
Zdenek Kabelac
75aa3e951f tests: dd needs to fail in this case 2015-05-03 01:06:20 +02:00
Zdenek Kabelac
224e30a4b1 tests: more waits on restart
Check for socket presence (hardcoded for now)
2015-05-03 00:43:15 +02:00
Zdenek Kabelac
31f1375d23 tests: use 800ms write delay
Since this value magically worked for  pvmove-abort*
use it here as well.

Also prepate_lvmetad has better kill&reload mechanism.
2015-05-03 00:43:15 +02:00
Zdenek Kabelac
4f6660db7d tests: use odirect
Fill snaphot with odirect so we know data hits disk
before we test how full the snapshot is.
2015-05-03 00:43:15 +02:00
Zdenek Kabelac
3542fce0fb tests: more advance cleanup of running pvmove
More take down more targets and use time-limited code.
2015-05-01 22:49:38 +02:00
Zdenek Kabelac
79844b9066 tests: minor simplifications
minor updates
2015-05-01 15:07:59 +02:00
Zdenek Kabelac
a3473e60db tests: no lvmetad reload for debugless output
Introduce LVM_TEST_LVMETAD_DEBUG_OPTS to allow to override
default debug opts for lvmetad.

However could be still overloaded on command line:

make check_lvmetad LVM_TEST_LVMETAD_DEBUG_OPTS="-l all"...
2015-05-01 15:07:58 +02:00
Zdenek Kabelac
16e8006eb0 tests: rename kill_tagged_processes
Better name for aux function.
First use normal -TERM, and only after a while use -KILL
(leaving some time to correctly finish)
Print INFO about killed processes.
2015-05-01 15:07:58 +02:00
Zdenek Kabelac
0480b4743a tests: wait between remount
Let's see if this help with some races...
2015-05-01 15:07:58 +02:00
Zdenek Kabelac
4daede06e5 tests: move kernel_at_least to aux
Hide func processing and reuse existing
version_at_least().
2015-05-01 15:07:58 +02:00
Zdenek Kabelac
f48a4c391c tests: watch out for RAM size
Reduce mem-requirements on low memory boxes,
activate less volumes if machine is below 0.5G.

Also print mem size at test header.
2015-05-01 15:07:58 +02:00
Ondrej Kozina
90cbc5576f tests: try harder to kill all dangling procs
also simplify and make less prone to an error checks
for running bg processes inside a pvmove-resume tests
2015-04-28 22:31:50 +02:00
Ondrej Kozina
8c9ab2a4dd tests: simplify removal of dangling bg procs
some tests left dangling bg processes originating in
lvm2 commands being able to spawn any bg polling process
(lvchange, vgchange, pvmove, lvconvert...)

Initial fn 'add_to_kill_list' should collect processes with
specific parameters (proc's command line and parent processes ID).
After testing finishes the fn kill_listed_processes should remove these
listed by 'add_to_kill_list'.

Unfortunately it proved to be prone to an error especially in scenarios
where cmd line of initiating command contained characters required to
be espaced before passing to shell script to make it work correctly.
(Or if cmd spawned more than one bg process with same cmd line. i.e.:
vgchange or lvchange).

The new implementation is much simpler. It uses env. variable (LVM_TEST_TAG)
for marking a process desired to be killed later or during test env. teardown.
(i.e.: LVM_TEST_TAG=kill_me_$PREFIX to kill only processes related to
current test environment)
2015-04-28 22:31:40 +02:00
Zdenek Kabelac
a378e5a6dd tests: drop debug test
Remove 'debug leftover' from test.
2015-04-28 11:23:16 +02:00
Zdenek Kabelac
a7d28639eb tests: use new help in aux
Simplify tests and use aux mdadm helpers.
2015-04-25 00:40:02 +02:00
Zdenek Kabelac
a939857a63 tests: check sysfs more generically
Allow to access more files in device sysfs subtree.
2015-04-25 00:40:02 +02:00
Ondrej Kozina
d9176782fe tests: add double quotes around add_to_kill_list parms 2015-04-25 00:40:02 +02:00
Zdenek Kabelac
de0ce46361 tests: fix md raid test on real /dev
Zero raid signatures when raid is stopped - so signatures
are not requiring wipe when pvcreate follows.

Handle real /dev
2015-04-23 20:28:44 +02:00
Zdenek Kabelac
2fea720881 tests: add missing "" around dev 2015-04-22 11:18:31 +02:00
Zdenek Kabelac
14c3f9603e tests: use 800ms delay
Worked better with pvmove-abort-all so use here as well.
2015-04-22 09:09:26 +02:00
Zdenek Kabelac
191f3cf52a tests: shell-fu
Preserve quotes for devs and use  shell arrays to pass things around.
2015-04-15 15:09:45 +02:00
Zdenek Kabelac
f5466fe435 tests: preserve "" around dev 2015-04-15 13:35:42 +02:00
Zdenek Kabelac
d1a770107d tests: update pvmove tests
Put in pvmove background process into list quickly.
Update API for aux add_to_kill_list()/kill_listed_processes().
Run on 'background' (&) only non-background pvmoves.
2015-04-14 13:29:43 +02:00
Ondrej Kozina
96124c6c0b tests: [new] check pvmove resume works as expected
various methods of resuming interrupted pvmove are tested:
- pvmove
- pvmove -b
- lvchange
- vgchange

tests for commits:
- c26d81d6e6
- fe30658a4d
2015-04-13 20:53:18 +02:00
Zdenek Kabelac
391500643c tests: slowdown mirroring more
Since some of test machines are very slow, slowdown mirroring
even more.
2015-04-13 16:38:31 +02:00
Zdenek Kabelac
249d4a921c tests: extend delay
400 was appeared to be good value in pvmove-abort.sh
so use also in abort-all.
2015-04-09 13:16:53 +02:00
Zdenek Kabelac
073643c9a2 tests: slowdown write on dev3 even more 2015-04-08 23:19:38 +02:00
Zdenek Kabelac
ebde60beab tests: use single lvmconf call 2015-04-08 23:19:37 +02:00
Zdenek Kabelac
8fdca0de79 tests: check scsi_debug support opt_blks
Some older kernels (i.e. lenny) do not have such options.
2015-04-07 14:59:13 +02:00
Zdenek Kabelac
ba049e203b tests: skip clvmd testing of mirrored LV vgsplit
There is something wrong when even inactive LV can't be splitted
without cmirrord being present for clustered VG.
2015-04-03 20:14:26 +02:00
Zdenek Kabelac
87cb0a3e9f tests: change default to 30s.
Keep rather the default lower and avoid to pass it with every call.
2015-04-03 19:40:43 +02:00
Zdenek Kabelac
32a0f625a5 tests: slow down devices in outer loop
Since now we have metadata parts running with normal speed,
we could avoid reinitilising delayed dev for every test.
(Saving seconds on cookie waits...)
2015-04-03 19:40:42 +02:00
Zdenek Kabelac
c88ffbf9df tests: delay only data portion of device 2015-04-03 17:18:11 +02:00
Zdenek Kabelac
ce3c61c4af tests: delay only data area 2015-04-03 14:54:22 +02:00
Zdenek Kabelac
385457de23 tests: test update
Really wait till fsck is running (sleep 2 is not ideal)
Use new  'delay_dev'.
2015-04-03 14:54:22 +02:00
Zdenek Kabelac
308f9bcc18 tests: simplify check sysfs_queue
Pass just device name and let figure out
sysfs path inside the function.
2015-04-03 10:27:00 +02:00
Zdenek Kabelac
a701d337d4 tests: slowdown pvmove devs more
Once pvmove is running - slow it even more
since some test machines tend to be very very slow.
2015-04-02 16:02:06 +02:00
Zdenek Kabelac
1966025245 tests: split bigger test
Use separate new test and avoid teardown_devs
in the middle of single test.
2015-04-02 16:01:01 +02:00
Zdenek Kabelac
ee65528547 tests: fix test warning
We cannot print TEST WARNING within test shell script
(since it's running in debug mode and thus always prints it)

Use 'should false' trick let the string printed in this case.
So 'non cluster cases' should now end properly.
2015-04-02 13:38:41 +02:00
Zdenek Kabelac
536f5fa0a3 tests: deal with kernel and broken lcm
If the kernel has 'new lcm()' (3.19) it provides wrong
optimal_io_size value for dm device so lvm2 command cannot
create properly aligned devices.

Use 'should' for this case - so test ends with 'TEST WARNING'.
2015-04-02 13:38:41 +02:00