IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Accept -q as the short form of --quiet.
Suppress non-essential standard output if -q is given twice.
Treat log/silent in lvm.conf as equivalent to -qq.
Review all log_print messages and change some to
log_print_unless_silent.
When silent, the following commands still produce output:
dumpconfig, lvdisplay, lvmdiskscan, lvs, pvck, pvdisplay,
pvs, version, vgcfgrestore -l, vgdisplay, vgs.
[Needs checking.]
Non-essential messages are shifted from log level 4 to log level 5
for syslog and lvm2_log_fn purposes.
This patch adds support for RAID10. It is not the default at this
stage. The user needs to specify '--type raid10' if they would like
RAID10 instead of stacked mirror over stripe.
Remove the limit for major and minor number arguments used while specifying
persistent numbers via -My --major <major> --minor <minor> option which
was set to 255 before. Follow the kernel limit instead which is 12 bits
for major and 20 bits for minor number (kernel >= 2.6 and LVM formats
that does not have FMT_RESTRICTED_LVIDS - so still keep the old limit
of 255 for lvm1 format).
One can use "lvcreate --aay" to have the newly created volume
activated or not activated based on the activation/auto_activation_volume_list
this way.
Note: -Z/--zero is not compatible with -aay, zeroing is not used in this case!
When using lvcreate -aay, a default warning message is also issued that zeroing
is not done.
We're refererring to 'activation' all over the code and we're talking
about 'LVs being activated' all the time so let's use 'activation/activate'
everywhere for clarity and consistency (still providing the old
'available' keyword as a synonym for backward compatibility with
existing environments).
Fix regression in man page. The chunk size is in kilobyte units on command line
input though in the source code we work with sector size unit
so make it clear in the man page.
Update chunksize for thin pool in man page - it's max value is 1024M == 1G.
Fix warning range message to show proper max value.
If the lvcreate may decide some automagical values for a user,
try to keep the pool metadata size into 128MB range for optimal
perfomance (as suggested by Joe).
So if the pool metadata size and chunk_size were not specified,
try to select such values they would fit into 128MB size.
Move the code for poolmetadatasize operation into one place.
Report override for minimum and maximum size.
Drop _read_thin_params function its error reporting is handled elsewhere.
If no size was give the later added minimal size check efectively
disable this code. Also the argument for size now must be kept
in sector_size, so adding division by SECTOR_SIZE (moved into
a const expression)
Read lvm.conf setting for monitoring for each command. So we should not
activate monitoring if the default compilation is set to monitor during
lvconvert commnads.
Patch also removes check for clustered VG and allows to disable monitoring
for clustered VG with the assumption, the problem with monitoring and dmeventd
flag passing for INGNORE is already fixed.
We want to keep this logic -
when LV is extend - extend the LV by at least given amount,
when LV is reduced - reduce the LV by at most given amount.
So for this the rounding needs to be used.
Current logic which seems to satisfy give rule is to round up all
extent values for LV resize upward except for values with '-' sign
that are round downward.
This patch also fixes the problem when lvextend --use-polices tried
to extend LV the by i.e. 20% - but the resulting 20% were smaller
the extent size thus before this patch no extension happened.
Since we finaly recognize thin creation only after
_determine_snapshot_type() - move _read_activation_params()
after it - so we can support lvcreate -an thin snapshot.
If you specify the segment type (e.g. --type mirror) and the mirrors argument
as zero, it would result in a mirrored LV with only one image. While the device
may be valid in theory, it should not be allowed in practice. It also makes it
difficult on the conversion tools, since they react badly to single-image
mirrors.
Move the free_vg() to vg.c and replace free_vg with release_vg
and make the _free_vg internal.
Patch is needed for sharing VG in vginfo cache so the release_vg function name
is a better fit here.
Implementation described in doc/lvm2-raid.txt.
Basic support includes:
- ability to create RAID 1/4/5/6 arrays
- ability to delete RAID arrays
- ability to display RAID arrays
Notable missing features (not included in this patch):
- ability to clean-up/repair failures
- ability to convert RAID segment types
- ability to monitor RAID segment types
When I see 'seg_is_mirrored', I expect the argument to be an lv_segment.
In this case, it is lvcreate_params. Both structures, have a 'segtype'
entry which the macro dereferences. However, it just seems easier to
understand if we do 'segtype_is_mirrored' instead.
Fixing some const warnings - with API change in:
int vg_extend(struct volume_group *vg, int pv_count, const char *const *pv_names,
Change is needed - as lvm2api expects const behaviour here.
So vg_extend() is doing local strdup for unescaping.
skip_dev_dir return const char* from const char* vg_name.
Rest of the patch is cleanup of related warnings.
Also using dm_report_filed_string() API change to simplify
casting in _string_disp and _lvname_disp.
clvmd does not propagate DMEVENTD_MONITOR_IGNORE.
Update get_activation_monitoring_mode() to check if the VG that the
LV is being activated in is clustered. If so, skip it.
Any get_activation_monitoring_mode() error will cause the associated LV
(or VG) to be skipped during activation. Both vgchange_single() and
lvchange_single(), which call get_activation_monitoring_mode(), are
called by their respective process_each_..() method.
This check-in enables the 'mirrored' log type. It can be specified
by using the '--mirrorlog' option as follows:
#> lvcreate -m1 --mirrorlog mirrored -L 5G -n lv vg
I've also included a couple updates to the testsuite. These updates
include tests for the new log type, and some fixes to some of the
*lvconvert* tests.
. Add "monitoring" option to "activation" section of lvm.conf
. Have clvmd consult the lvm.conf "activation/monitoring" too.
. Introduce toollib.c:get_activation_monitoring_mode().
. Error out when both --monitor and --ignoremonitoring are provided.
. Add --monitor and --ignoremonitoring support to lvcreate. Update
lvcreate man page accordingly.
. Clarify that '--monitor' controls the start and stop of monitoring in
the {vg,lv}change man pages.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Allow the number of logical extents to be expressed (for a snapshot) as
a percentage of the total space in the Origin Logical Volume with the
suffix %ORIGIN.
Update the relevant man pages accordingly. Eliminate inconsistencies
between the man pages and tools/commands.h
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
- fix missing unlocking of VG
lvcreate -l 100%PVS -n lv1 vg_test
Please specify physical volume(s) with %PVS
Internal error: Volume Group vg_test was not unlocked
- if no PVS specified, use all available
Fix segfault if %PVS in lvresize without PVs list.
After some refactorings, we can now move the bulk of _lvcreate into the
internal library, and we can call from liblvm. In the future, we should
refactor lv_create_single further, probably by segtype, to reduce the
size of struct lvcreate_params. For now this is a reasonable refactor
and allows us to re-use the function from liblvm.
Author: Dave Wysochanski <dwysocha@redhat.com>
The main _lvcreate function should deal with extents - the 'size' parameter
is just an intermediate step.
Should be no functional change.
Author: Dave Wysochanski <dwysocha@redhat.com>
Create a new structure, lvcreate_cmdline_params, to store parameters only
relevant for the cmdline, not the library call to lvcreate.
Should be no functional change.
Author: Dave Wysochanski <dwysocha@redhat.com>
Move extents calculation adjustments into their own local functions
right after we read the vg. This calculation really is not part of
the LV create function but is rather an adjustment to the parameters
based on what is given on the cmdline. So we move it outside the main
_lvcreate.
Should be no functional change.
Author: Dave Wysochanski <dwysocha@redhat.com>
A couple simple refactorings of _lvcreate - should be no functional change.
Move tags_ARG parsing into _lvcreate_params. Also use lp->voriginsize
instread of arg_count(). These refactorings make it easier to move the
bulk of _lvcreate into the library.
Author: Dave Wysochanski <dwysocha@redhat.com>
Fix vg_read() error paths to properly release upon vg_read_error().
Note that in the iterator paths (process_each_*()), we release
inside the iterator so no individual cleanup is needed. However there
are a number of other places we missed the cleanup. Proper cleanup
when vg_read_error() is true should be calling vg_release(vg), since
there should be no locks held if we get an error (except in certain
special cases, which IMO we should work to remove from the code).
Unfortunately the testsuite is unable to detect these types of memory
leaks. Most of them can be easily seen if you try an operation
(e.g. lvcreate) with a volume group that does not exist. Error
message looks like this:
Volume group "vg2" not found
You have a memory leak (not released memory pool):
[0x1975eb8]
You have a memory leak (not released memory pool):
[0x1975eb8]
Author: Dave Wysochanski <dwysocha@redhat.com>
Sun May 3 11:40:51 CEST 2009 Petr Rockai <me@mornfall.net>
* Convert the straight instances of vg_lock_and_read to new vg_read(_for_update).
Rebased 6/26/09 by Dave W.
Sun May 3 11:40:51 CEST 2009 Petr Rockai <me@mornfall.net>
* Convert the straight instances of vg_lock_and_read to new vg_read(_for_update).
Author: Petr Rockai <prockai@redhat.com>
Committer: Dave Wysochanski <dwysocha@redhat.com>
We can temporarily violate max_lv during mirror conversion etc.
(If the operation fails, orphan mirror images are visible to administrator
for manual remove for example. Not that this should ever happen:-)
Force limit only for lvcreate (and vg merge) command.
Patch also adds simple max_lv tests into testsuite
The snapshot segment (snapshotX) is created twice
during the text metadata segment processing.
This can cause temporary violation of max_lv count.
Simplify the code, snapshot segment is properly initialized
in init_snapshot_seg function now and do not need to be replaced
by vg_add_snapshot call.
The vg_add_snapshot() is now usefull only for adding new
snapshot and it shares the same initialization function.
The snapshot name is always generated, name paramater can be
removed from function call.
Add lvs origin_size field.
Fix linux configure --enable-debug to exclude -O2.
Still a few rough edges, but hopefully usable now:
lvcreate -s vg1 -L 100M --virtualoriginsize 1T
The backup() call store metadata from memory.
But in cluster backup() call performs
remote nodes metadata backup and it reads data from disk.
For metadata backup consistency,
patch moves all backup() calls after vg_commit.
(Moreover, some tools already do that this way.)
Patch fixes these problems:
- during the snapshot creation process, it needs create 2 LVs,
one is cow, second becomes snapshot.
If the code fails in vg_add_snapshot, code lvcreate will not remove
LV cow volume.
- if max_lv is set and VG contains snapshot, it can happen that
during the activation lv_count is temporarily increased over the limit
and VG metadata are not properly processed
see https://bugzilla.redhat.com/show_bug.cgi?id=490298
- vgcfgrestore alows restore with max_lv set to lower valuer that actual
LV count. This later leads to situation that max_lv is completely ignored.
- vgck doesn't call vg_validate(). It should at least try:-)
Signed-off-by: Milan Broz <mbroz@redhat.com>
Fix missing VG unlocks in some pvchange error paths.
Add some missing validation of VG names.
Rename validate_vg_name() to validate_new_vg_name().
Change orphan lock to VG_ORPHANS.
Change format1 to use ORPHAN as orphan VG name.
log type. Previously, we had a '--corelog' argument that
would change the default type from 'disk' to 'core'. I
think that creates too much confusion - especially when
doing conversions on mirrors.
The new argument '--log' takes either "disk" or "core"
as a parameter. This could be expanded in the future
for additional logging types as well.
Examples:
# Creating a 2-way mirror
$> lvcreate -m1 ... # implicitly use default disk logging
$> lvcreate -m1 --log disk ... # explicit disk logging
$> lvcreate -m1 --log core ... # specify core logging
$> lvcreate -m1 --corelog ... # old way still works
# Conversion examples
$> lvconvert --log core ... # convert to core logging
$> lvconvert --log disk ... # convert to disk logging
$> lvconvert -mX --corelog ... # old way still works
$> lvconvert -mX ... # old way of converting to disk logging still works
Changes are reflected in the man pages.
e.g. lvcreate -l 100%FREE to create an LV using all available space.
lvextend -l 50%LV to increase an LV by 50% of its existing size.
lvcreate -l 20%VG to create an LV using 20% of the total VG size.
Add --config for overriding most config file settings from cmdline.
Quote arguments when printing command line.
Remove linefeed from 'initialising logging' message.
Add 'Completed' debug message.
Don't attempt library exit after reloading config files.
Always compile with libdevmapper, even if device-mapper is disabled.
Fix some memory leaks in error paths found by coverity.
Use C99 struct initialisers.
Move DEFS into configure.h.
Clean-ups to remove miscellaneous compiler warnings.
Clear many compiler warnings (i386) & associated bugs - hopefully without
introducing too many new bugs:-) (Same exercise required for other archs.)
Default compilation has optimisation - or else use ./configure --enable-debug
to back this out so you can do that commit, let me know. Also, if there's
an issue with the error message that's displayed, just change it in tools.h.
This causes a "device-mapper driver/module not loaded?" error message to
be displayed for the commands that require dm-mod, if the tools can't get
the driver version. It's not done for commands that don't require dm-mod.
This should clear up some problems people have had attempting to use lvm2
without rtfm'ing.
allocation policy. This can currently take one of three values:
typedef enum {
ALLOC_NEXT_FREE,
ALLOC_STRICT,
ALLOC_CONTIGUOUS
} alloc_policy_t;
Notice that 'SIMPLE' has turned into the slightly more meaningful NEXT_FREE.
ii) Put code into display.[hc] for converting one of these enums to a
text representation and back again.
ii) Updated the text format so this also has the alloc_policy field.
Lots of changes/very little testing so far => there'll be bugs!
Use 'vgcreate -M text' to create a volume group with its metadata stored
in text files. Text format metadata changes should be reasonably atomic,
with a (basic) automatic recovery mechanism if the system crashes while a
change is in progress.
Add a metadata section to lvm.conf to specify multiple directories if
you want (recommended) to keep multiple copies of the metadata (eg on
different filesystems).
e.g. metadata {
dirs = ["/etc/lvm/metadata1","/usr/local/lvm/metadata2"]
}
Plenty of refinements still in the pipeline.
from lock_vol() - otherwise it now attempts to acquire the lock and then
immediately releases it.
o Extend the id field in struct logical_volume to hold VG uuid + LV uuid
for format1. This unique lvid can be used directly when calling lock_vol().
o Add the VG uuid to vgcache to make VG uuid lookups possible. (Another
step towards using them instead of VG names internally.)
o #defines for common lock flag combinations
o Try out hyphens instead of colons in device-mapper names - does this
make messages containing filenames easier to read?
o Use first unused lv_number when creating new LV
o Use lv_number for refs to snapshots
o Update persistent minor logic after the lvcreate restructure
o Reset all parameters before use in lvcreate.
slightly different from the current LVM1 method.
lvcreate --persistent y --minor 10 (to specify when created)
lvchange --persistent n (to turn off)
lvchange --persistent y --minor 11 (to change)
--persistent uses a new LV status flag stored on disk
minor number is stored on disk the same way as LVM1 does
(but major number stored is 0; any LVM1 major/minor setting gets lost)
lvchange -ay --minor 12 (to activate using minor 12, regardless of the
on-disk setting, which doesn't get changed)
--minor == -m
--persistent == -M
