IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There are two basic groups of fields for LV segment device reporting:
- related to LV segment's devices: devices and seg_pe_ranges
- related to LV segment's metadata devices: metadata_devices and seg_metadata_le_ranges
The devices and metadata_devices report devices in this format:
"device_name(extent_start)"
The seg_pe_ranges and seg_metadata_le_ranges report devices in
this format:
"device_name:extent_start-extent_end"
This patch reverts partly what commit 7f74a99502
(v 2.02.140) introduced in this area - it added [] for
hidden devices to mark them for all four fields mentioned above.
We won't be marking hidden devices in devices and metadata_devices
fields.
The seg_metadata_le_ranges field will have hidden devices marked -
it's new enough that we don't need to care about compatibility much
yet.
The seg_pe_ranges is old enough that we shouldn't be changing this
one - so we're reverting to not marking hidden devices here.
Instead, there's going to be a new field "seg_le_ranges" which
is going to replace the seg_pe_ranges and it will mark hidden devices -
this is going to be introduced in a patch later.
So in the end we'll end up with:
(LV segment's devices)
devices field with "device_name(extent_start)" format, not marking hidden devices
seg_pe_ranges field with "device_name:extent_start-extent_end" format, not marking hidden devices (deprecated, new seg_le_ranges should be used instead for standardized format)
seg_le_ranges field with "device_name:extent_start-extent_end" format, marking hidden devices
(LV segment's metadata devices)
metadata_devices field with "device_name:extent_start-extent_end" format, not marking hidden devices
seg_metadata_le_ranges field with "device_name:extent_start-extent_end" format, marking hidden devices
Also, both seg_le_ranges and seg_metadata_le_ranges will honour the
report/list_item_separator setting which can be used to configure
the delimiter used for list items.
So, to sum it up, we will recommend using the new seg_le_ranges and
seg_metadata_le_ranges fields because they display devices with
standard extent range format, they can mark hidden devices and they
honour the report/list_item_separator setting.
We'll be keeping devices,seg_pe_ranges and metadata_devices fields
for compatibility.
The associated devices,metadata_devices,seg_pe_ranges and
seg_metadata_le_ranges are reported as genuine string lists now.
This allows for using the items separately in -S|--select
(so searching for subsets etc.) and also it allows for
configuring the separator using report/list_item_separator
which may be useful in scripts (however, we'll enable this
only for seg_le_metadata_ranges and not for devices,seg_pe_ranges
and seg_metadata_devices for compatibility reasons - see following
patch).
When reporting on LVs, take the end of the range from the size of the
underlying (hidden) LV rather than the logical size of the current
segment (that PVs use).
Existing cache_settings field displays the settings which are
saved in metadata. Add new kernel_cache_settings fields to display
the settings which are currently used by kernel, including fields
for which default values are used.
This way users have complete view of the set of cache settings
supported (and which they can set) and their values which are used
at the moment by kernel.
For example:
$ lvs -o name,cache_policy,cache_settings,kernel_cache_settings vg
LV Cache Policy Cache Settings KCache Settings
cached1 mq migration_threshold=1024,write_promote_adjustment=2 migration_threshold=1024,random_threshold=4,sequential_threshold=512,discard_promote_adjustment=1,read_promote_adjustment=4,write_promote_adjustment=2
cached2 smq migration_threshold=1024 migration_threshold=1024
cached3 smq migration_threshold=2048
Fix lvm2app to return either 0 or 1 for lvm_vg_is_{clustered,exported},
including internal functions pvseg_is_allocated and vg_is_resizeable
which are not yet exposed in lvm2app but make them consistent with the
rest.
This reverts e28e22b9e1
The problem that that commit was fixing (pytest failure)
no longer appears with the current code, so the commit is
not needed.
That commit is a problem for pvchange, because it prevents
lvmcache from retaining VG metadata even while the global
lock is held. pvchange holds the global lock to ensure
that VG metadata is kept in lvmcache throughout processing.
If the cache is not kept, a PV with zero MDAs will appear
first in its actual VG and then appear again in the orphan VG.
It wrongly appears a second time in the orphan VG only if
the actual VG is dropped from lvmcache.
Thin pool discard mode set in metadata can be different from the one
actually used if any device underneath does not support that mode. Add
kernel_discard report field to make it possible to see this difference.
Internal _alloc_init() is only called from allocate_extents(),
which already does prevent usage of virtual segments.
So mark as internal error early and do not process it any further.
Add new test for lv_is_snapshot().
Also move few other bitchecks into same place as remaining bit tests.
TODO: drop lv_is_merging_origin() and keep using lv_is_merging().
Include brackets for the name if the dev is invisible.
This change applies to all callers of _format_pvsegs fn:
- lvseg_devices (the "lvs -o devices")
- lvseg_metadata_devices (the "lvs -o metadata_devices)
- lvseg_seg_pe_ranges (the "lvs -o seg_pe_ranges")
- lvseg_seg_metadata_le_ranges (the "lvs -o seg_metadata_le_ranges")
The common lv_pool_lv fn avoids code duplication and also
the reporting part now uses _lvname_disp and _uuid_disp to display
name and uuid respectively, including brackets for the name if the
dev is invisible.
The common lv_metadata_lv fn avoids code duplication and also
the reporting part now uses _lvname_disp and _uuid_disp to display
name and uuid respectively, including brackets for the name if the
dev is invisible.
The common lv_data_lv fn avoids code duplication and also
the reporting part now uses _lvname_disp and _uuid_disp to display
name and uuid respectively, including brackets for the name if the
dev is invisible.
The common lv_mirror_log_lv fn avoids code duplication and also
the reporting part now uses _lvname_disp and _uuid_disp to display
name and uuid respectively, including brackets for the name if the
dev is invisible.
The common lv_origin_lv fn avoids code duplication and also
the reporting part now uses _lvname_disp and _uuid_disp to display
name and uuid respectively, including brackets for the name if the
dev is invisible.
The common lv_convert_lv fn avoids code duplication and also
the reporting part now uses _lvname_disp and _uuid_disp to display
name and uuid respectively, including brackets for the name if the
dev is invisible.
Use common _lvname_disp to report lv_parent. The _lvname_disp
takes care of properly marking LVs which are not visible - such
LVs are always enclosed in brackets when reported within any
other field.
For example, thin pool over RAID.
Before:
$ lvs -a -o name,lv_parent,data_lv,metadata_lv vg
LV Parent Data Meta
cache_pool [cache_pool_tdata] [cache_pool_tmeta]
[cache_pool_tdata] cache_pool
[cache_pool_tdata_rimage_0] cache_pool_tdata
[cache_pool_tdata_rimage_1] cache_pool_tdata
[cache_pool_tdata_rmeta_0] cache_pool_tdata
[cache_pool_tdata_rmeta_1] cache_pool_tdata
[cache_pool_tmeta] cache_pool
[cache_pool_tmeta_rimage_0] cache_pool_tmeta
[cache_pool_tmeta_rimage_1] cache_pool_tmeta
[cache_pool_tmeta_rmeta_0] cache_pool_tmeta
[cache_pool_tmeta_rmeta_1] cache_pool_tmeta
[lvol0_pmspare]
With this patch applied:
$ lvs -a -o name,lv_parent,data_lv,metadata_lv vg
LV Parent Data Meta
cache_pool [cache_pool_tdata] [cache_pool_tmeta]
[cache_pool_tdata] cache_pool
[cache_pool_tdata_rimage_0] [cache_pool_tdata]
[cache_pool_tdata_rimage_1] [cache_pool_tdata]
[cache_pool_tdata_rmeta_0] [cache_pool_tdata]
[cache_pool_tdata_rmeta_1] [cache_pool_tdata]
[cache_pool_tmeta] cache_pool
[cache_pool_tmeta_rimage_0] [cache_pool_tmeta]
[cache_pool_tmeta_rimage_1] [cache_pool_tmeta]
[cache_pool_tmeta_rmeta_0] [cache_pool_tmeta]
[cache_pool_tmeta_rmeta_1] [cache_pool_tmeta]
[lvol0_pmspare]
Do not mix dm_report_field_set_value and _field_set_value and
use single function call throughout for clarity. The same applies
for dm_report_field_string and _string_disp.
Fix regression caused by commit c2d4330f27
which removed the dm_pool_strdup for the cache policy name in
_cache_policy_disp report function.
This regression was hit with buffered reporting only (which is
used by default). The reason is that for buffered reporting, we're
iterating over LVs in VG (process_each_lv) while gathering
all the information that is needed for the report. In this case,
the LV's cache policy name has not been duped, but only the pointer
to the original VG buffer was stored. When the LV iteration finished,
the VG buffer was freed and any report to output called later
(dm_report_output call) accessed already freed VG data.
This didn't appear if unbuffered reporting was used (--unbuffered)
because in this case, the data were reported to output as
soon as they were processed, hence it was reported to output
before the VG data was freed.
Have commands send lvmlockd the update message
in vg_write instead of vg_commit, so that it's
not done while LVs are suspended. If the vg_write
is not committed, and the seqno sent to lvmlockd
is not used, then lvmlockd can detect this when
the next update uses the same seqno.
Use process_each_vg() to lock and read the old VG,
and then call the main vgrename code.
When real VG names are used (not a UUID in place of the
old name), the command still pre-locks the new name
(when strcmp wants it locked first), before calling
process_each_vg on the old name.
In the case where the old name is replaced with a UUID,
process_each_vg now translates that UUID into the real
VG name, which it locks and reads. In this case, we
cannot do pre-locking to maintain lock ordering because
the old name is unknown. So, in this case the strcmp
based lock ordering is suppressed and the old name is
always locked first. This opens a remote chance for
lock ordering conflict between racing vgrenames between
two names where one or both commands use the UUID.
Before commit c1f246fedf,
_get_all_devices() did a full device scan before
get_vgnameids() was called. The full scan in
_get_all_devices() is from calling dev_iter_create(f, 1).
The '1' arg forces a full scan.
By doing a full scan in _get_all_devices(), new devices
were added to dev-cache before get_vgnameids() began
scanning labels. So, labels would be read from new devices.
(e.g. by the first 'pvs' command after the new device appeared.)
After that commit, _get_all_devices() was called
after get_vgnameids() was finished scanning labels.
So, new devices would be missed while scanning labels.
When _get_all_devices() saw the new devices (after
labels were scanned), those devices were added to
the .cache file. This meant that the second 'pvs'
command would see the devices because they would be
in .cache.
Now, the full device scan is factored out of
_get_all_devices() and called by itself at the
start of the command so that new devices will
be known before get_vgnameids() scans labels.
Since we mark cache-pool as 'hidden/private' while it is in-use,
we may still allow user to change it's name.
It should not cause any harm and user may prefer better naming
for a cache-pool in use.
It's getting a bit more complex here.
Basic idea behind is - check_current_backup() should not
log error when a user is using a read-only filesystem,
so e.g. vgscan will not report any error when it tries
to take missing backup.
We still have cases when error could be reported though,
e.g. the backup this would be a symbolic link, but these
are rather misconfiguration and unexpected case.
We have to modes of 'archive()' usage -
1. compulsory - fail stops command and user may try '-An' option
to do a command.
2. non-compulsory - some fails in archiving are ignorable (i.e.
read-only filesystem where archive dir is located).
Those 2 cases needs to be properly handle - i.e. the non-compulsory
logging should not be tampering error logging message production.
So more work here is needed
Pass full buffer size to printf() function - no reason to make
buffer 1 char smaller.
Also rename locn buffer to message buffer directly since it's
not used for anything else.
TODO: we may use same buffer also for 'buf[]' since there is
no collision - so may safe 1K on stack usage.
When two different VGs with the same name exist,
they are both stored in lvmcache using the vginfo->next
list. Previously, the code would print warnings (sometimes)
when adding VGs to this list. Now the duplicate VG names
are handled by higher level code, so this list no longer
needs to print warnings about duplicate VG names being found.
After recent changes to process_each, vg_read() is usually
given both the vgname and vgid for the intended VG.
However, in some cases vg_read() is given a vgid with
no vgname, or is given a vgname with no vgid.
When given a vgid with no vgname, vg_read() uses lvmcache
to look up the vgname using the vgid. If the vgname is
not found, vg_read() fails.
When given a vgname with no vgid, vg_read() should also
use lvmcache to look up the vgid using the vgname.
If the vgid is not found, vg_read() fails.
If the lvmcache lookup finds multiple vgids for the
vgname, then the lookup fails, causing vg_read() to fail
because the intended VG is uncertain.
Usually, both vgname and vgid for the intended VG are passed
to vg_read(), which means the lvmcache translations
between vgname and vgid are not done.
When not using lvmetad, this uses the system_id field in
the cached vginfo structs that are populated during a scan.
When using lvmetad, this requests the VG from lvmetad, and
checks the system_id field in the returned metadata.
When the command already knows both the vgid and vgname,
it should send both to lvmetad for a more exact request,
and it can save lvmetad the work of a name lookup.
Remove long outstand unused code lines, which were already
been obsoleted by other code.
Statuses and snapshot tree creation is already handled differently.
Also drop some 'extra' log_error() and use only stack;
since error has already been reported.
Since we do not use dev_manager in a way we would have destroyed VG
content while in-use - we could safely keep just pointer.
So dropping strdup.
Also it seems we actually no longer use vg_name for anything
so it may possibly go away completely unless it would be useful
for debugging...
Just for convenience to display all new configuration settings
introduced since given version (before, there was only --atversion
to display settings introduced in concrete version).
For example:
$ lvmconfig --type new --sinceversion 2.2.120
allocation {
# cache_mode="writethrough"
# cache_settings {
# }
}
global {
use_lvmlockd=0
# lvmlockd_lock_retries=3
# sanlock_lv_extend=256
use_lvmpolld=1
}
activation {
}
# report {
# compact_output_cols=""
# time_format="%Y-%m-%d %T %z"
# }
local {
# host_id=0
}
Unifying terminology.
Since all the metadata in-use are ALWAYS on disk - switch
to terminology committed and precommitted.
Patch has no functional change inside.
lv preload for detached LVs started to be used also
for various other types which just happens to pass through
weak if() condition.
TODO: find here better solution to rather explicitly check
for types we really need to preload.
We do not won't to 'expose' internals of VG struct.
ATM we use lists to keep all LVs - we may want to switch
to better struct for quicker 'search'.
Since we do not need 'lists' but always actual LV,
switch find_lv_in_vg_by_lvid() to return LV,
and replaces some use case of find_lv_in_vg()
with 'better' working find_lv() which already
returns LV.
When 'lvextend -L+XX vg/thinpool' do not leave inactive table
loaded for 'wrapping' LV on top of resized thin-pool
(ATM we use linear LV for this with same size as thin-pool).
Udev recently start to 'link-in' major amount of useless libs.
(Seem to be faulty 'systemd' link-in all issue)
Anyway - avoid locking those libs in RAM.
Coverity here is a bit 'blind' here and cannot resolve which
code paths are actually able to hit this code path.
(It's using 'statistic' to resolve all possible paths,
and it's not scanning 'individual' code paths.)
This just cleans warns and add 'cheap' tests.
Use 'mda' instead of NULL to quite Coverity warn.
However this code seems to be actually not even possible to hit.
With proper analysis it may possibly be dropped from code to
simplify logic.
Skip testing target_pvs for NULL, we already
dereference it in many other places.
If check would ever be needed - it needs to be
in front of _raid_extract_images().
When reading older lvm2 metadata for cache-pool - we now handle more
extended syntax - basically we want to enter most setting when
actually creating cached LV.
For this new validation code has been added. However older metadata
without new settings set is now found as invalid.
Fix it by adding default settings for cache policy mq
and cache mode writethrough.
Here Coverity cannot see the pointer cannot be NULL in this
code path - opened coverity case #00531860.
We could make a model to avoid seeing related reports,
but then we loose coverage for modeled function.
So decided to add minor hint for this case.
The udev_device_get_is_initialized is available since libudev version
165. Older versions are still used somewhere (e.g. RHEL6). So better
check for this fn and use it only if it's available.
Udev db records are marked as not initialized (incomplete) on timeout.
Issue an error message whenever LVM finds such records so users are
aware that something's going wrong with udev db.
This is important in case we use devices/external_device_info_source="udev"
where udev database records are used to do various filtering decisions.
For example:
udev log of timed out worker:
Nov 11 13:02:25 raw.virt systemd-udevd[607]: seq 1997 '/devices/virtual/block/dm-2' is taking a long time
Nov 11 13:04:25 raw.virt systemd-udevd[607]: seq 1997 '/devices/virtual/block/dm-2' killed
Nov 11 13:04:25 raw.virt systemd-udevd[607]: worker [11221] terminated by signal 9 (Killed)
Nov 11 13:04:25 raw.virt systemd-udevd[607]: worker [11221] failed while handling '/devices/virtual/block/dm-2'
...
LVM also issues error message visibly if incomplete udev db record is found,
devices/external_device_info_source="udev" is set:
$ pvs
Udev database has incomplete information about device /dev/dm-2.
Failed to get external handle for device /dev/dm-2 [udev].
...
Coverity noticed this condition is always false and the error
path could never be visited.
So check for all mismatches of supported messages
and actually mark log_error as internal error.
