1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-09 18:03:17 +03:00
Commit Graph

659 Commits

Author SHA1 Message Date
zkabelac
6a8ba51d82 cleanup: typo premable to preamble
Correct preable, seems even unused.
2024-08-30 16:51:04 +02:00
Peter Rajnoha
30e25d0db9
config: update description for log/command_log_selection 2024-08-30 14:20:03 +02:00
Zdenek Kabelac
038760da4f gcc: single type initializers
Older gcc doesn't really like complex types (buffer, struct) to be
initialized without extra {} around such type.
So pick any other 'single type' var from a struct and set it to 0,
rest will do the compiler without emitting a warning.
2024-08-22 14:47:29 +02:00
Peter Rajnoha
3eecdcbd64 config_settings: fix typo 2024-07-24 09:50:26 +00:00
Peter Rajnoha
8281f7c111 config: use default log/command_log_report=1 for json/json_std output format
log/command_log_report config setting defaults to 1 now if json or json_std
output format is used (either by setting report/output_format config
setting or using --reportformat cmd line arg).

This means that if we use json/json_std output format, the command log
messages are then part of the json output too, not interleaved as
unstructured text mixed with the json output.

If log/command_log_report is set explicitly in the config, then we still
respect that, no matter what output format is used currently. In this
case, users can still separate and redirect the output by using
LVM_OUT_FD, LVM_ERR_FD and LVM_REPORT_FD so that the different types
do not interleave with the json/json_std output.
2024-07-24 09:50:26 +00:00
David Teigland
57e9083c90 config_file: remove unused code
config_file_read() is only used for regular files, not devices.
2024-07-02 16:24:12 -05:00
David Teigland
76bd678ce3 devices: isolate fake device setup for config file
Freeing dev-cache from dumb fake device usage.
2024-07-02 16:18:09 -05:00
Zdenek Kabelac
90c6c421cd cov: convert some more enternal field masks
Some more 'internal' masks misusing enums for bitfields.
2024-05-27 16:35:23 +02:00
Zdenek Kabelac
45c06025da cleanup: some typos
Collection of some typos or invalid uppercase or doublespace cases.
2024-05-27 15:35:57 +02:00
David Teigland
c609dedc2f Allow system.devices to be automatically created on first boot
An OS installer can create system.devices for the system and
disks, but an OS image cannot create the system-specific
system.devices.  The OS image can instead configure the
image so that lvm will create system.devices on first boot.

Image preparation steps to enable auto creation of system.devices:
- create empty file /etc/lvm/devices/auto-import-rootvg
- remove any existing /etc/lvm/devices/system.devices
- enable lvm-devices-import.path
- enable lvm-devices-import.service

On first boot of the prepared image:
- udev triggers vgchange -aay --autoactivation event <rootvg>
- vgchange activates LVs in the root VG
- vgchange finds the file /etc/lvm/devices/auto-import-rootvg,
  and no /etc/lvm/devices/system.devices, so it creates
  /run/lvm/lvm-devices-import
- lvm-devices-import.path is run when /run/lvm/lvm-devices-import
  appears, and triggers lvm-devices-import.service
- lvm-devices-import.service runs vgimportdevices --rootvg --auto
- vgimportdevices finds /etc/lvm/devices/auto-import-rootvg,
  and no system.devices, so it creates system.devices containing
  PVs in the root VG, and removes /etc/lvm/devices/auto-import-rootvg
  and /run/lvm/lvm-devices-import

Run directly, vgimportdevices --rootvg (without --auto), will create
a new system.devices for the root VG, or will add devices for the
root VG to an existing system.devices.
2024-05-21 16:29:12 -05:00
Zdenek Kabelac
0bcf2c6514 const: use arrays of strings
Such string is stored directly in '.rodata' section.
2024-05-04 01:01:57 +02:00
Zdenek Kabelac
acabc995c0 const: config items 2024-05-04 01:01:57 +02:00
Zdenek Kabelac
84b084c9b6 configure.ac: define DEFAULT_PROC_DIR in one place
Let's move proc into include/configure.h so this define can
be easily used across the source base.

Configure defines it - but ATM we do not provide any configure
option to change it - there should be no need to ever change it.
2024-04-15 13:38:44 +02:00
Zdenek Kabelac
cd9b2b32aa configure: add --with-default-event-activaion=ON
Add new configurable option for building lvm2 with enable/disable
default autoactivation setting.

Might be useful for building i.e. rpms for systems where
this event_activation is not desired.
2024-04-09 17:47:03 +02:00
Zdenek Kabelac
ac90ab7736 cov: drop some unneeded continue 2024-03-25 16:54:11 +01:00
David Teigland
d1aacae0f7 lvm.conf: update scan_lvs description
to better reflect the devices file existence, and
to mention layered autoactivation in lvm udev rules.
2024-02-21 11:08:02 -06:00
David Teigland
e59027e4f7 devices file: back up each version
Create backup copies of system.devices in /etc/lvm/devices/backup
named system.devices-YYYYMMDD.HHMMSS.NNNN.  NNNN is the version
counter from the file.

Each time that an lvm command writes a new system.devices file,
it also writes the same file in the backup directory.

A new comment line is added to system.devices with HASH=<num>
where <num> is a crc calculated from the uncommented lines in
system.devices.  This lets lvm detect if the file has been
modified outside of lvm itself.

If system.devices is edited directly, the next time a command
reads the file, the crc will not match the HASH value.  The
command will then rewrite system.devices with the correct HASH
value, and create a backup reflecting the edits.

A default limit of 50 backup files is kept, configurable by
lvm.conf devicesfile_backup_limit (set to 0 to disable backups.)
2024-02-15 11:40:37 -06:00
Andre Klärner
fe822f7043 system_id: explain the reason for choosing appmachineid over machineid
Since understanding the reason for choosing the appmachineid over the
direct use of machineid is not easily found, I extended to help text to
clarify this a bit.
2024-02-05 14:01:22 -06:00
David Teigland
921ceddebf lvmconfig: uncomment the report section
so settings can be changed without uncommenting the
start/end of the section.
2023-11-17 13:52:49 -06:00
David Teigland
35cefa50fa device_id: change default search_for_devnames to all
Problematic scenario:
. the device for a PV has no wwid, so it's identified in system.devices
  with IDTYPE=devname IDNAME=/dev/foo
. user adds/enables a wwid for the device
. on reboot, the device name changes, e.g. now /dev/bar
. the code that searches for the new device name includes an
  optimization to skip looking on devs that have a wwid, on
  the basis that a device with a wwid won't have IDTYPE=devname
. this optimization causes lvm to not look for the PV on /dev/bar
  since that device now has a wwid, so the PV is not found
. the optimization is enabled by search_for_devnames="auto"
. change the default to search_for_devnames="all" which does not
  use the problematic optimization
2023-11-02 13:00:50 -05:00
David Teigland
88aa285a79 devices: refresh device ids if the system changes
If the system changes, locate PVs that appear on different devices,
and update the device IDs in the devices file.  A system change is
detected by saving the DMI product_uuid or hostname in the devices
file, and comparing it to the current system value.  If a root PV
is restored or copied to a new system with different devices, then
the product_uuid or hostname should change, and trigger lvm to
locate PVIDs from system.devices on new devices.
2023-09-27 15:22:11 -05:00
Peter Rajnoha
14d0a9eef6
report: support printing full column names in report headings
Reuse existing report/headings config setting to make it possible to
change the type of headings to display:
  0 - no headings
  1 - column name abbreviations (default and original functionality)
  2 - full column names (column names are equal to exact names that
      -o|--options also accepts to set report output)

Also, add '--headings none|abbrev|full|0|1|2' command line option
so we are able to select the heading type for each LVM reporting
command directly.
2023-08-28 15:44:57 +02:00
Zdenek Kabelac
4d2311655b lvm-exec: refactor code
Add prepare_exec_args() for reading option list for
thin/cache_repair, thin/cache_check.
2023-07-17 12:44:23 +02:00
Zdenek Kabelac
96123b9059 cleanup: use spelling synchronize
Use single spelling form for synchronize.
2023-07-10 17:13:32 +02:00
Zdenek Kabelac
6ff65e6755 vdo: check_point_frequence is unused option
This vdo parameter existed in the early stage of integration of vdo into lvm2,
but later it's been removed from vdoformat tool - so actually if
there would be any non-zero value it would cause error on lvcreate.
Option was not stored on disk in lvm2 metadata.

Remove this vdo parameter from lvm2 sources.

(Although this vdo parameter will be still accepted on cmdline through
 --vdosettings option, but it will be ignored.)
2023-06-29 13:10:42 +02:00
Zdenek Kabelac
46fe47b8e0 debug: add backtraces 2023-06-23 18:08:03 +02:00
Zdenek Kabelac
fec3087eef thin: add cfg support for thin_restore and cache_restore
Add configurable paths for thin_restore and cache_restore.
2023-06-23 18:06:22 +02:00
Zdenek Kabelac
534269d0fb vdo: document feature option 2023-05-06 20:38:57 +02:00
Zdenek Kabelac
662020c221 cov: simplier code
Avoid coverity to contruct some abstract scenarions of 'cft'
modification and simplify the code at the same time.
2023-05-06 19:22:05 +02:00
David Teigland
8458ff9ad1 remove extra change from support 16KB page size 2023-04-07 15:57:28 -05:00
David Teigland
b443eac6ef support 16KB page size 2023-04-07 14:26:09 -05:00
Zdenek Kabelac
e3534d0f68 lvm: fix typos
Patch aec5e573af was fixing some
of typos only in generated file, but they need to be fixed in
the source files.
2023-02-10 17:50:27 +01:00
David Teigland
79e67fc5e4 device id: add new types using values from vpd_pg83
The new device_id types are: wwid_naa, wwid_eui, wwid_t10.
The new types use the specific wwid type in their name.
lvm currently gets the values for these types by reading
the device's vpd_pg83 sysfs file (this could change in the
future if better methods become available for reading the
values.)

If a device is added to the devices file using one of these
types, prior versions of lvm will not recognize the types
and will be unable to use the devices.

When adding a new device, lvm continues to first use sys_wwid
from the sysfs wwid file.  If the device has no sysfs wwid file,
lvm now attempts to use one of the new types from vpd_pg83.

If a devices file entry with type sys_wwid does not match a
given device's sysfs wwid file, the sys_wwid value will also
be compared to that device's other wwids from its vpd_pg83 file.
If the kernel changes the wwid type reported from the sysfs
wwid file, e.g. from a device's t10 id to its naa id, then lvm
should still be able to match it correctly using the vpd_pg83
data which will include both ids.
2022-10-10 11:47:29 -05:00
Zdenek Kabelac
e757965222 gcc: eliminate warnings
Gcc starts to show new warning - although unlikely to be able to hit
initialize variables to 0.
2022-09-07 14:58:01 +02:00
Peter Rajnoha
ac2c78544f config: check for possible mempool errors in _out_line_fn 2022-08-17 12:52:02 +02:00
Peter Rajnoha
8a23683a59 config: remove unnecessary copy of config line's space prefix before printing
When we wanted to insert '#' before a config line (to comment it out),
we used dm_pool_strndup to temporarily copy the space prefix first so
we can assemble the final line with:

   "<space_prefix># <key>=<value>":

out of original:

  "<space_prefix><key>=<value>".

The space_prefix copy is not necessary, we can just use fprintf's
precision modifier "%.*s" to print the exact part if we alrady
know space_prefix length.
2022-08-17 10:47:43 +02:00
Peter Rajnoha
b4cc28c2ef lvmconfig: add --valuesonly option
The new --valuesonly option causes the lvmconfig output to contain only
values without keys for each config node. This is practical mainly in
case where we use lvmconfig in scripts and we want to assign the value
to a different custom key or simply output the value itself without the
key.

For example:

  # lvmconfig --type full activation/raid_fault_policy
  raid_fault_policy="warn"

  # lvmconfig --type full activation/raid_fault_policy --valuesonly
  "warn"

  # my_var=$(lvmconfig --type full activation/raid_fault_policy --valuesonly)

  # echo $my_var
  "warn"
2022-08-17 10:47:24 +02:00
Peter Rajnoha
6cba28a335 config: recognize 'json_std' for report/output_format config setting 2022-08-11 11:10:11 +02:00
Marian Csontos
2fc52b6c41 config: add correct unconfigured value for use_devicesfile 2022-08-09 16:17:45 +02:00
Zdenek Kabelac
b5c8e591ed vdo: use defines also for configuration defines
Keep single source for most of values printed in lvm.conf
(still needs some conversion)

Correct max for logical threads to 60
(we may refuse some older configuration which might eventually
user higher numbers - but so far let's assume no user have ever set this
as it's been non-trivial and if would complicate code unnecessarily.)

Accept maximum of 4PiB for virtual size of VDO LV
(lvm2 will drop 'header borders to 0 for this case').
2022-07-11 01:18:24 +02:00
Zdenek Kabelac
f83b3962c1 asan: fix some reports from libasan
When compiled and used with:

CFLAGS="-fsanitize=address -g -O0"
ASAN_OPTIONS=strict_string_checks=1:detect_stack_use_after_return=1:check_initialization_order=1:strict_init_order=1

we have few reported issue - they where not normally spotted, since
we were still accessing our own memory - but ouf of buffer-range.

TODO: there is still something to enhance with handling of #orphan vgids
2022-02-07 20:02:11 +01:00
David Teigland
ee8fb0310c remove static autoactivation
event based autoactivation is now the only method that lvm
provides for autoactivation.

Setting lvm.conf event_activation=0 can still be used to disable
event based autoactivation commands, but doing so will no longer
enable static autoactivation.
2022-01-27 16:43:11 -06:00
Zdenek Kabelac
09a4b56895 hash: raise hash table size
With slightly bigger hash tables, there is considerable
less hash collisions.
2021-12-20 16:13:28 +01:00
David Teigland
726dd25969 add hints interface to the pvs_online file information
The information in /run/lvm/pvs_online/<pvid> files can
be used to build a list of devices for a given VG.

The pvscan -aay command has long used this information to
activate a VG while scanning only devices in that VG, which
is an important optimization for autoactivation.

This patch implements the same thing through the existing
device hints interface, so that the optimization can be
applied elsewhere.  A future patch will take advantage of
this optimization in vgchange -aay, which is now used in
place of pvscan -aay for event activation.
2021-11-04 10:58:16 -05:00
Zdenek Kabelac
b73e1cd4b3 configure: updates 2021-10-14 23:34:11 +02:00
David Teigland
062ea3c418 fix syslog setting
Just setting lvm.conf level=N should not send messages to
syslog (now the journal by default.)

Sending messages to syslog should require setting lvm.conf
log { syslog=1 level=N }.
2021-10-11 17:11:01 -05:00
David Teigland
bbf8e7db74 logging: to the systemd journal
Configure via lvm.conf log/journal or command line --journal.

Possible values:
"command" records command information.
"output" records default command output.
"debug" records full command debugging.

Multiple values can be set in lvm.conf as an array.
One value can be set in --journal which is added to
values set in lvm.conf
2021-10-07 12:06:49 -05:00
David Teigland
3e1316bb09 system_id: new appmachineid option
The new system_id_source="appmachineid" will cause
lvm to use an lvm-specific derivation of the machine-id,
instead of the machine-id directly.  This is now
recommended in place of using machineid.
2021-10-07 12:06:49 -05:00
David Teigland
6c22392a3f config: change default use_devicesfile to 1 2021-10-07 12:06:49 -05:00
David Teigland
02626cbd33 config: comment all default settings 2021-10-07 12:06:49 -05:00