IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The vgchange/lvchange activation commands read the VG, and
don't write it, so they acquire a shared VG lock from lvmlockd.
When other commands fail to acquire a shared VG lock from
lvmlockd, a warning is printed and they continue without it.
(Without it, the VG metadata they display from lvmetad may
not be up to date.)
vgchange/lvchange -a shouldn't continue without the shared
lock for a couple reasons:
. Usually they will just continue on and fail to acquire the
LV locks for activation, so continuing is pointless.
. More importantly, without the sh VG lock, the VG metadata
used by the command may be stale, and the LV locks shown
in the VG metadata may no longer be current. In the
case of sanlock, this would result in odd, unpredictable
errors when lvmlockd doesn't find the expected lock on
disk. In the case of dlm, the invalid LV lock could be
granted for the non-existing LV.
The solution is to not continue after the shared lock fails,
in the same way that a command fails if an exclusive lock fails.
A segfault was reported when extending an LV with a smaller number of
stripes than originally used. Under unusual circumstances, the cling
detection code could successfully find a match against the excess
stripe positions and think it had finished prematurely leading to an
allocation being pursued with a length of zero.
Rename ix_offset to num_positional_areas and move it to struct
alloc_state so that _is_condition() can obtain access to it.
In _is_condition(), areas_size can no longer be assumed to match the
number of positional slots being filled so check this newly-exposed
num_positional_areas directly instead. If the slot is outside the
range we are trying to fill, just ignore the match for now.
(Also note that the code still only performs cling detection against
the first segment of the LV.)
Keep policy name separate from policy settings and avoid
to mangling and demangling this string from same config tree.
Ensure policy_name is always defined.
There are two different failure conditions detected in
access_vg_lock_type() that should have different error
messages. This adds another failure flag so the two
cases can be distinguished to avoid printing a misleading
error message.
There are at least a couple instances where
the lock_args check does not work correctly,
(listed in the comment), so disable the
NULL check for lock_args until those are
resolved.
Existing messaging intarface for thin-pool has a few 'weak' points:
* Message were posted with each 'resume' operation, thus not allowing
activation of thin-pool with the existing state.
* Acceleration skipped suspend step has not worked in cluster,
since clvmd resumes only nodes which are suspended (have proper lock
state).
* Resume may fail and code is not really designed to 'fail' in this
phase (generic rule here is resume DOES NOT fail unless something serious
is wrong and lvm2 tool usually doesn't handle recovery path in this case.)
* Full thin-pool suspend happened, when taken a thin-volume snapshot.
With this patch the new method relocates message passing into suspend
state.
This has a few drawbacks with current API, but overal it performs
better and gives are more posibilities to deal with errors.
Patch introduces a new logic for 'origin-only' suspend of thin-pool and
this also relates to thin-volume when taking snapshot.
When suspend_origin_only operation is invoked on a pool with
queued messages then only those messages are posted to thin-pool and
actual suspend of thin pool and data and metadata volume is skipped.
This makes taking a snapshot of thin-volume lighter operation and
avoids blocking of other unrelated active thin volumes.
Also fail now happens in 'suspend' state where the 'Fail' is more expected
and it is better handled through error paths.
Activation of thin-pool is now not sending any message and leaves upto a tool
to decided later how to finish unfinished double-commit transaction.
Problem which needs some API improvements relates to the lvm2 tree
construction. For the suspend tree we do not add target table line
into the tree, but only a device is inserted into a tree.
Current mechanism to attach messages for thin-pool requires the libdm
to know about thin-pool target, so lvm2 currently takes assumption, node
is really a thin-pool and fills in the table line for this node (which
should be ensured by the PRELOAD phase, but it's a misuse of internal API)
we would possibly need to be able to attach message to 'any' node.
Other thing to notice - current messaging interface in thin-pool
target requires to suspend thin volume origin first and then send
a create message, but this could not have any 'nice' solution on lvm2
side and IMHO we should introduce something like 'create_after_resume'
message.
Patch also changes the moment, where lvm2 transaction id is increased.
Now it happens only after successful finish of kernel transaction id
change. This change was needed to handle properly activation of pool,
which is in the middle of unfinished transaction, and also this corrects
usage of thin-pool by external apps like Docker.
Make it possible to define format for time that is displayed.
The way the format is defined is equal to the way that is used
for strftime function, although not all formatting options as
used in strftime are available for LVM2 - the set is restricted
(e.g. we do not allow newline to be printed). The lvm.conf
comments contain the whole list that LVM2 accepts for time format
together with brief description (copied from strftime man page).
For example:
(defaults used - the format is the same as used before this patch)
$ lvs -o+time vg/lvol0 vg/lvol1
LV VG Attr LSize Time
lvol0 vg -wi-a----- 4.00m 2015-06-25 16:18:34 +0200
lvol1 vg -wi-a----- 4.00m 2015-06-29 09:17:11 +0200
(using 'time_format = "@%s"' in lvm.conf - number of seconds
since the Epoch)
$ lvs -o+time vg/lvol0 vg/lvol1
LV VG Attr LSize Time
lvol0 vg -wi-a----- 4.00m @1435241914
lvol1 vg -wi-a----- 4.00m @1435562231
Synchronize with udev logic before reusing device as snapshot.
This patch tries to fix the problem with udev, where we manage
to 'active' LV for clearing, then we deactivate such device and
active again as member of 'origin&snapshot' tree all in 1 step.
There needs to be a sync point where udev has time to remove all links,
otherwise we race with scans and we may end-up with mysterious 'free'
links in the system pointing to wrong dm names.
This patch tries to fix failing topology cluster tests..
With thin-pool kernel target module 1.13 it's now support usage of
external origin with sizes which are not 'alligned' with chunk size
of thin-pool.
Enable lvm2 support for this and also fix reporting of data_percent
usage for case sizes are not alligned.
Just as 'e' means activation with an exclusive lock,
add an 's' to mean activation with a shared lock.
This allows the existing but implicit behavior of '-ay'
of clvm LVs to be specified explicitly. For local VGs,
asy simply means ay, just like aey means ay.
For local VGs, ay == aey == asy
For clvm VGs, ay == asy, aey == aey, asy == asy
In process_each_{vg,lv,pv} when no vgname args are given,
the first step is to get a list of all vgid/vgname on the
system. This is exactly what lvmetad returns from a
vg_list request. The current code is doing a vg_lookup
on each VG after the vg_list and populating lvmcache with
the info for each VG. These preliminary vg_lookup's are
unnecessary, because they will be done again when the
processing functions call vg_read. This patch eliminates
the initial round of vg_lookup's, which can roughly cut in
half the number of lvmetad requests and save a lot of extra work.
When kernel target reports sync status as 0% it might as well mean
it's 100% in sync, just the target is in some race inconsistent
state - so reread once again and take a more optimistic value ;)
Patch tries to work around:
https://bugzilla.redhat.com/show_bug.cgi?id=1210637
When performing initial allocation (so there is nothing yet to
cling to), use the list of tags in allocation/cling_tag_list to
partition the PVs. We implement this by maintaining a list of
tags that have been "used up" as we proceed and ignoring further
devices that have a tag on the list.
https://bugzilla.redhat.com/983600
Add A_PARTITION_BY_TAGS set when allocated areas should not share tags
with each other and allow _match_pv_tags to accept an alternative list
of tags. (Not used yet.)
Do not keep dangling LVs if they're removed from the vg->lvs list and
move them to vg->removed_lvs instead (this is actually similar to already
existing vg->removed_pvs list, just it's for LVs now).
Once we have this vg->removed_lvs list indexed so it's possible to
do lookups for LVs quickly, we can remove the LV_REMOVED flag as
that one won't be needed anymore - instead of checking the flag,
we can directly check the vg->removed_lvs list if the LV is present
there or not and to say if the LV is removed or not then. For now,
we don't have this index, but it may be implemented in the future.
This avoids a problem in which we're using selection on LV list - we
need to do the selection on initial state and not on any intermediary
state as we process LVs one by one - some of the relations among LVs
can be gone during this processing.
For example, processing one LV can cause the other LVs to lose the
relation to this LV and hence they're not selectable anymore with
the original selection criteria as it would be if we did selection
on inital state. A perfect example is with thin snapshots:
$ lvs -o lv_name,origin,layout,role vg
LV Origin Layout Role
lvol1 thin,sparse public,origin,thinorigin,multithinorigin
lvol2 lvol1 thin,sparse public,snapshot,thinsnapshot
lvol3 lvol1 thin,sparse public,snapshot,thinsnapshot
pool thin,pool private
$ lvremove -ff -S 'lv_name=lvol1 || origin=lvol1'
Logical volume "lvol1" successfully removed
The lvremove command above was supposed to remove lvol1 as well as
all its snapshots which have origin=lvol1. It failed to do so, because
once we removed the origin lvol1, the lvol2 and lvol3 which were
snapshots before are not snapshots anymore - the relations change
as we're processing these LVs one by one.
If we do the selection first and then execute any concrete actions on
these LVs (which is what this patch does), the behaviour is correct
then - the selection is done on the *initial state*:
$ lvremove -ff -S 'lv_name=lvol1 || origin=lvol1'
Logical volume "lvol1" successfully removed
Logical volume "lvol2" successfully removed
Logical volume "lvol3" successfully removed
Similarly for all the other situations in which relations among
LVs are being changed by processing the LVs one by one.
This patch also introduces LV_REMOVED internal LV status flag
to mark removed LVs so they're not processed further when we
iterate over collected list of LVs to be processed.
Previously, when we iterated directly over vg->lvs list to
process the LVs, we relied on the fact that once the LV is removed,
it is also removed from the vg->lvs list we're iterating over.
But that was incorrect as we shouldn't remove LVs from the list
during one iteration while we're iterating over that exact list
(dm_list_iterate_items safe can handle only one removal at
one iteration anyway, so it can't be used here).
Refactor the recent metadata-reading optimisation patches.
Remove the recently-added cache fields from struct labeller
and struct format_instance.
Instead, introduce struct lvmcache_vgsummary to wrap the VG information
that lvmcache holds and add the metadata size and checksum to it.
Allow this VG summary information to be looked up by metadata size +
checksum. Adjust the debug log messages to make it clear when this
shortcut has been successful.
(This changes the optimisation slightly, and might be extendable
further.)
Add struct cached_vg_fmtdata to format-specific vg_read calls to
preserve state alongside the VG across separate calls and indicate
if the details supplied match, avoiding the need to read and
process the VG metadata again.
