IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If a RaidLV mapping is required to be refreshed as a result of temporarily failed
and recurred RAID leg device (pairs) caused by writes to the LV during failure,
the requirement is reported by volume health character r' in position 9 of the
LV's attribute field (see 'man lvs' about additional volume health characters).
As this character can be overlooked, this patch adds messages to the top
of the lvs command output informing the user explicitely about the fact.
Fix typos in previous commit 3589e515d.
Both commands default [raid_](min|max)recoveryrate to 0 but ensure
min_recovery_rate is not larger than max_recoveryrate. This results
in command failure without requesting the user to also define
max_recovery_rate >= min_recovery_rate.
Fix both commands by defining max_recovery_rate = min_recoveryrate
in case "lvcreate/lvchange --minrecoveryrate Size ..." requests a
larger value than current maxrecoveryrate without also giving option
Both commands default [raid_](min|max)recoveryrate to 0 but ensure
min_recovery_rate is not larger than max_recoveryrate. This results
in command failure without requestinng the user to also define
max_recovery_rate >= min_recovery_rate.
Fix both commands by defining max_recovery_rate = min_recoveryrate
in case "lvcreate/lvchange --minrecoveryrate Size ..." requests a
larger value than current maxrecoveryrate without also giving option
"--maxrecoveryrate Size ..." with a size greater or equal than min.
pvs -A|--allpvs
Show PVs that would otherwise be excluded by the devices file.
pvscan -A|--allpvs
Show PVs that would otherwise be excluded by the devices file.
For those devices that are included by the devices file,
their device ID is displayed in place of the usual "lvm2"
format and size.
(pvs -a|--all is unchanged, and shows devices not formatted as PVs.)
A pvid string read from system.devices could be less
then ID_LEN since system.devices fields can be edited.
Ensure the pvid buffer is ID_LEN+1 even if the string
read from the file is shorter.
- add new comparison between old and new entries, and use this
as the basis for new dedicated output for check and update
- add new --refresh option to search for missing PVIDs on all
devices, and possibly update the device ID
- internally, only use the term "refresh" for cases where a
new device ID may be found and assigned for a missing PVID
Since LVM 2.02 it appears that compiling LVM on a platform which
lacks a shared library linker/loader will fail to produce any
binaries (dmsetup, lvm2, etc).
Adds support for the standard --disable-shared flag, and
use it to disable attempts at building shared libraries.
Modified-by: zkabelac
Fix some interactions between device IDs and hints. Hints
may limit the scanned devices which should not always trigger
a search for the PVs that were intentionally not scanned.
Hints should also be invalidated if they contain a device
that's become excluded by an internal filter such as the
device_id filter.
Fix commit 847f1dd99c
"device_id: rewrite validation of devname entries"
which began calling device_ids_refresh() in cases where it
was unnecessary, leading to extra PV searches and warnings.
Specifically, a command like "lvs <vg>" would use the hints
file to scan only devices for the named VG. This means that
scanning other PVs would be skipped, and device IDs of those
PVs could not be validated because there are no PVID values
to verify. This missing info would cause messages about
the missing info, and would cause device_ids_refresh to
search for the PVs that had been intentionally skipped.
If the system changes, locate PVs that appear on different devices,
and update the device IDs in the devices file. A system change is
detected by saving the DMI product_uuid or hostname in the devices
file, and comparing it to the current system value. If a root PV
is restored or copied to a new system with different devices, then
the product_uuid or hostname should change, and trigger lvm to
locate PVIDs from system.devices on new devices.
Make a local copy of the 'idx' string to avoid
overlapping during the rebuild of name.
This fixes cases where users specified raid
component LVs for moving.
Reported-by: kotarou3@github.com
When creating thin pool or check pool there is allocated LV
for metadata and for such allocation user should be able to
specify list of PVs on cmdline.
Also fix unused passed list of PV for thick to thin conversion,
where the code was using whole PV set from a VG (but since it's
been not enabled on cmdline, user could not hit this issue).
Also remove unneeded initialization of use_pvh.
Reuse existing report/headings config setting to make it possible to
change the type of headings to display:
0 - no headings
1 - column name abbreviations (default and original functionality)
2 - full column names (column names are equal to exact names that
-o|--options also accepts to set report output)
Also, add '--headings none|abbrev|full|0|1|2' command line option
so we are able to select the heading type for each LVM reporting
command directly.
Set the lock_args string in addition to doing initialization.
lvconvert calls lockd_init_lv_args() directly, skipping
the normal lockd_init_lv() which usually sets lock_args.
lvmlockd locking for swapmetadata adjusted for commit
ac36153e99 lvconvert: preserve UUID for swapped metadata
Now that the LV uuid is swapped between LVs, the lvmlockd lock can
simply be moved between them, and the same lock can continue to be
used for the LV outside of the pool.
Once lvm2 repairs pool's metadata LV and preserves the original metadata LV
with unmodified metadata, for such LV in VG use newly created UUID for new
_pmspare and actually preserve UUID for this hidden _pmspare (if it
exists).
The lockd lock needs to be freed for the LV that is becoming
the new metadata LV, and a new lockd lock needs to be created
for the old metadata LV that is becoming an independent LV.
Fixes b3e45219c2
Use cachepool name for create name for metadata backup LV.
(so we do not generate 2 'sequences' of metadata filenames.)
Move path preparion before handling _pmspare.
Also drop extra call to sync_local_dev_names() as it's
already got in sync with call of exec_cmd().
When repair thinpool or cachepool, lvm2 leaves original metadata
volume backup. To avoid potential damage of those data, mark such
volume as 'read-only' and also allow user to use --setactivationskip
option for this volume.
TODO: likely better default would be to automatically skip, but
that might need some more thinking about recovery reporting doc.
Replace the use of internal /dev/mapper names with the use of
public LV names /dev/vg/lv for use with repair tools.
For this make the activation of _pmspare LV to be handled as
a component activation with public name.
Metadata is already atomatically activated this way (as readonly).
So if there is any 'error' happening, we leave public LVs in
system.
