IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When LV gets cached and uses cache-pool - such cache-pool
will now get _cpool suffix automatically.
Thus 'Pool' column for cached LV will now show either _cvol
or _cpool LV.
Since code is using -cdata and -cmeta UUID suffixes, it does not need
any new 'extra' ID to be generated and stored in metadata.
Since introduce of new 'segtype' cache+CACHE_USES_CACHEVOL we can
safely assume 'new' cache with cachevol will now be created
without extra metadata_id and data_id in metadata.
For backward compatibility, code still reads them in case older
version of metadata have them - so it still should be able
to activate such volumes.
Bonus is lowered size of lv structure used to store info about LV
(noticable with big volume groups).
Enhance activation of cached devices using cachevol.
Correctly instatiace cachevol -cdata & -cmeta devices with
'-' in name (as they are only layered devices).
Code is also a bit more compacted (although still not ideal,
as the usage of extra UUIDs stored in metadata is troublesome
and will be repaired later).
NOTE: this patch my brink potentially minor incompatiblity for 'runtime' upgrade
For wiping we activate and clear 'regular' devices,
since in case of whole process interuption (i.e. kill -9)
we leave metadata & DM table and workable state all the time.
Enhance 'activation' experience for VDO pool to more closely match
what happens for thin-pools where we do use a 'fake' LV to keep pool
running even when no thinLVs are active. This gives user a choice
whether he want to keep thin-pool running (wihout possibly lenghty
activation/deactivation process)
As we do plan to support multple VDO LVs to be mapped into a single VDO,
we want to give user same experience and 'use-patter' as with thin-pools.
This patch gives option to activate VDO pool only without activating
VDO LV.
Also due to 'fake' layering LV we can protect usage of VDO pool from
command like 'mkfs' which do require exlusive access to the volume,
which is no longer possible.
Note: VDO pool contains 1024 initial sectors as 'empty' header - such
header is also exposed in layered LV (as read-only LV).
For blkid we are indentified as LV with UUID suffix - thus private DM
device of lvm2 - so we do not need to store any extra info in this
header space (aka zero is good enough).
When lvm2 is activating layered pool LV (to basically keep pool opened,
the other function used to be 'locking' be in sync with DM table)
use this LV in read-only mode - this prevents 'write' access into
data volume content of thin-pool.
Note: since EMPTY/unused thin-pool is created as 'public LV' for generic
use by any user who i.e. wish to maintain thin-pool and thins himself.
At this moment, thin-pool appears as writable LV. As soon as the 1st.
thinLV is created, layer volume will appear is 'read-only' LV from this moment.
Support internal removal of 'cache origin' volume - which we
do not normally expose to a user - however internal processing
loops may hit this condition (depending on order of list LVs).
So when this operation is internally requested - we automatically
try to remove it's 'holding' LV (cache LV) - which will also
remove the origin.
Resuming of 'error' table entry followed with it's dirrect removal
is now troublesame with latest udev as it may skip processing of
udev rules for already 'dropped' device nodes.
As we cannot 'synchronize' with udev while we know we have devices
in suspended state - rework 'cleanup' so it collects nodes
for removal into pending_delete list and process the list with
synchronization once we are without any suspended nodes.
Between 'resume' and 'remove' we need to wait for udev to synchronize,
otherwise udev may 'skip' resume event processing if the udev node
is already gone.
When pvmove is finished, we do a tricky operation since we try to
resume multiple different device that were all joined into 1 big tree.
Currently we use the infromation from existing live DM table,
where we can get list of all holders of pvmove device.
We look for these nodes (by uuid) in new metadata, and we do now a full
regular device add into dm tree structure. All devices should be
already PRELOAD with correct table before entering suspend state,
however for correctly working readahead we need to put correct info
also into RESUME tree. Since table are preloaded, the same table
is skip and resume, but correct read ahead is now set.
The OPTIONS+="event_timeout" is Unsupported since systemd/udev version 216,
that is ~5 years ago.
Since systemd/udev version 243, there's a new message printed if unsupported
OPTIONS value is used:
Invalid value for OPTIONS key, ignoring: 'event_timeout=180'
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1740666
Recent kernel version from kernel commit:
de7180ff908b2bc0342e832dbdaa9a5f1ecaa33a
started to report in cache status line new flag:
no_discard_passdown
Whenever lvm spots unknown status it reports:
Unknown feature in status:
So add reconginzing this feature flag and also report this with
'lvs -o+kernel_discards'
When no_discard_passdown is found in status 'nopassdown' gets reported
for this field (roughly matching what we report for thin-pools).
To avoid tiny race on checking arrival of signal and entering select
(that can latter remain stuck as signal was already delivered) switch
to use pselect().
If it would needed, we can eventually add extra code for older systems
without pselect(), but there are probably no such ancient systems in
use.
We already used Conflicts=shutdown target to stop LVM2 services on shutdown.
But we still missed the ordering - the shutdown.target should be reached
only after all the services are really stopped.
Reported here: https://github.com/lvmteam/lvm2/issues/17
When data are growing, adapt also size of metadata.
As we get way too many reports from users doing huge growths of
data portion while keep metadata small and avoiding using monitoring.
So to enhance the user-experience in case user requests grown of
thin-pool (without passing PV list for growth) - lvm2 will automaticaly
grown also the metadata part of thin-pool (if possible).
Udev is running udev-rule action upon 'resume'.
However lvm2 in special case is doing replacement of
'soon-to-be-removed' device with 'error' target for resuming
and then follows actual removal - the sequence is usually quick,
so when udev start action - it can result in 'strange' error
message in kernel log like:
Process '/usr/sbin/dmsetup info -j 253 -m 17 -c --nameprefixes --noheadings --rows -o name,uuid,suspended' failed with exit code 1.
To avoid this - we need to ensure there is synchronization wait for udev
between 'resume' and 'remove' part of this process.
However existing code put strict requirement to avoid synchronizing with
udev inside critical section - but this originally came from requirement
to not do anything special while there could be devices in
suspend-state. Now we are able to see differnce between critical section
with or without suspended devices. For udev synchronization only
suspended devices are prohibited to be there - so slightly relax
condition and allow calling and using 'fs_sync()' even inside critical
section - but there must not be any suspended device.
Allow using caching with VDO.
User can either cache a single vdopool or
a vdo LV - difference when the caching is put-in depends on a use-case
and it's upto user to decide which kind of speed is expected.
Internal detection of SCSI device being in-use by DM mpath has been
performed several times for each component device - this could be
eventually racy - so instead when we do remember 1st. checked result
for device being mpath and use it consistenly over the filter runtime.
Move DM usage into dev_manager.c source file.
Also convert STATUS to INFO ioctl - as that's enough
to obtain UUID - this also avoid issuing unwanted flush on checked DM
device for being mpath.
Whenever thin-pool chunk size is unspecified and left for lvm calculation
try to select the size as nearest highest power-of-2 instead of
just being a multiple of 64KiB.
Now with newer VDO kvdo target we can start to use standard mechanism
to enable resize of VDO volumes.
VDO pool can be grown.
Virtual volume grows on top of VDO pool when is not big enough.
Reduced VDOLV is calling discard for reduced areas - this can
take long time!
TODO: implement some pollable mechanism for out-of-lock TRIM.
When using 'lvcreate -l100%VG' and there is big disproportion between
real available space and requested setting - automatically fallback
to 100%FREE.
Difference can be seen when VG is big and already most space was
allocated, so the requestion 100%VG can end (and by spec for % modifier
it's correct) as LV with size of 1%VG. Usually this is not a big
problem - buit in some cases - like cache-pool allocation, this
can result a big difference for chunksize selection.
With this patch it's more closely match common-sense logic without
the need of reitteration of too big changes in lvm2 core ATM.
TODO: in the future there should be allocator solving all allocations
in a single call.
When using caches with BIG pool size (>TB) there is required
to use relatively huge chunk size. Once the chunksize has
got over 1MiB - kernel cache target stopped writing such chunks
back on this if the migration_threshold remained on default 1MiB
(2048 sectors) size.
This patch ensure, DM layer will not let pass table line which
has not big enough migration threshold that can let pass
at least 8 chunks (independently of lvm2 metadata).
lvm uses 'minimum_io_size' name to exactly match VDO naming here,
however in all common cases _size is using 'sector/512b' unit.
But in this case the value is in bytes and can have only 2 values:
either 512 or 4096.
It's probably not worth to rename it internaly, so we can just
drop comment - instead of using 1 or 8.
Thought let's think about it....
The systemd generators are executed very early during the switch
from initramfs to system partition and the syslog is not yet fully
operational - it may cause blocking, if some debug logging is enabled
at the same time in /etc/lvm/lvm.conf log{} section.
To avoid timeouting and killing this generator - rather enhance lvm
code to suppress any syslog communication when LVM_SUPPRESS_SYSLOG
envvar is set.
Use of this envvar is needed since the parsing of i.e. cmdline options
that could eventually override lvm.conf setting happens in this case
way too late and number of lines could have been already streamed to
syslog.
Fix a scenario where global/event_activation setting is not found. In
this case we need to take default value just like lvm tools do when
executed. So use "lvmconfig --type full".
Also, if we fail to execute lvmconfig for whatever reason, fallback to
generating the activation units as failsafe action.
Reported by: Bastian Blank <waldi debian org>
Drop very old original format of VDO target and focus on V2 version.
So some variables were renamed or replaced.
There is no compatibility preserved (with assumption so far this is
experimental feature and there is no real user).
Note - version currently VDO calls this version 6.2.
Scenario: Given an existed LV `lvol0`, I want to create another LV
on the PVs used by `lvol0`.
I use `build_parallel_areas_from_lv()` to obtain the `pv_list` of each segments.
However, the returned `pv_list` is not properly initialized, which causes
segfault in subsequent operations.
There's a small window during creation of a new RaidLV when
rmeta SubLVs are made visible to wipe them in order to prevent
erroneous discovery of stale RAID metadata. In case a crash
prevents the SubLVs from being committed hidden after such
wiping, the RaidLV can still be activated with the SubLVs visible.
During deactivation though, a deadlock occurs because the visible
SubLVs are deactivated before the RaidLV.
The patch adds _check_raid_sublvs to the raid validation in merge.c,
an activation check to activate.c (paranoid, because the merge.c check
will prevent activation in case of visible SubLVs) and shares the
existing wiping function _clear_lvs in raid_manip.c moved to lv_manip.c
and renamed to activate_and_wipe_lvlist to remove code duplication.
Whilst on it, introduce activate_and_wipe_lv to share with
(lvconvert|lvchange).c.
Resolves: rhbz1633167
Thin plugin started to use configuble setting to allow to configure
usage of external scripts - however to read this value it needed to
execute internal command as dmeventd itself has no access to lvm.conf
and the API for dmeventd plugin has been kept stable.
The call of command itself was not normally 'a big issue' until users
started to use higher number of monitored LVs and execution of command
got stuck because other monitored resource already started to execute
some other lvm2 command and become blocked waiting on VG lock.
This scenario revealed necesity to somehow avoid calling lvm2 command
during resource registration - but this requires bigger changes - so
meanwhile this patch tries to minimize the possibility to hit this race
by obtaining any configurable setting just once - such patch is small
and covers majority of problem - yet better solution needs to be
introduced likely with bigger rework of dmeventd.
TODO: avoid blocking registration of resource with execution of lvm2
commands since those can get stuck waiting on mutexes.
Allow "lvconvert --type linear RaidLV" on a raid4 LV
providing convenient interim steps to convert to linear.
Add respective new test
lvconvert-raid-takeover-raid4_to_linear.sh
and
lvconvert-raid-takeover-linear_to_raid4.sh
for linear to raid4 once on it.
When converting from striped/raid0/raid0_meta
to raid6 with > 2 stripes, allow possible
direct conversion (to raid6_n_6).
In case of 2 stripes, first convert to raid5_n to restripe
to at least 3 data stripes (the raid6 minimum in lvm2) in
a second conversion before finally converting to raid6_n_6.
As before, raid6_n_6 then can be converted
to any other raid6 layout.
Enhance lvconvert-raid-takeover.sh to test the
2 stripes conversions to raid6.
Resolves: rhbz1624038
Add "lvm2-activation-generator: " prefix for all kmsg messages written by
lvm2-activation-generator so we can identify the message in global system log.
We need to have Ceph RBD devices mapped first before use in a stack
where LVM is on top so make sure rbdmap.service is called before
generated lvm2-activation-net.service.
On shutdown, we need to stop blk-availability first before we stop the
rbdmap.service.
Resolves: rhbz1623479
This is the number of concurrent async io requests that
the scan layer will submit to the bcache layer. There
will be an open fd for each of these, so it is best to
keep this well below the default limit for max open files
(1024), otherwise lvm may get EMFILE from open(2) when
there are around 1024 devices to scan on the system.
"lvconvert --type linear RaidLV" on striped and raid4/5/6/10
have to provide the convenient interim layouts. Fix involves
a cleanup to the convenience type function.
As a result of testing, add missing sync waits to
lvconvert-raid-reshape-linear_to_raid6-single-type.sh.
Resolves: rhbz1447809
Conversion to striped from raid0/raid0_meta is directly possible.
Fix a regression setting superfluous interim raid5_n conversion type
introduced by commit bd7cdd0b09.
Add new test script lvconvert-raid0-striped.sh.
Resolves: rhbz1608067
With improved mirror activation code --splitmirror issue poppedup
since there was missing proper preload code and deactivation
for splitted mirror leg.
Amound of linked libraries grows.
Most of them we don't need to lock in, since we are not using
them in locked section, so skip locking them in memory.
When pvmoving LV - the target for LV is a mirror so the validation
that checked the type is matching was incorrect.
While we need a more generic enhancment of LVS output for pvmoved LVs,
for now at least stop showing internal errors and 'X' symbols in attrs.
In case "lvconvert -mN RaidLV" was used on a degraded
raid1 LV, success was returned instead of an error.
Provide message to inform about the need to repair first
before changing number of mirrors and exit with error.
Add new lvconvert-m-raid1-degraded.sh test.
Resolves: rhbz1573960
