1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

17978 Commits

Author SHA1 Message Date
David Teigland
e88163ceac fix lvmcache_add log_debug pvid
from previous cleanup
2021-10-13 17:30:21 -05:00
David Teigland
6fb497ef42 toollib: remove all devices list from process_each_pv
Reporting non-PVs / "all devices" is only done by
pvs -a or pvdisplay -a, so avoid the work managing
a list of all devices in process_each_pv.
In the case when it's needed, use the results of
label_scan which already determines which devs
are not PVs.
2021-10-13 17:29:32 -05:00
David Teigland
272d1ccac8 devices file: unmatching system id should just be warning
there are likely more cases than not where the systemid
does not match and the command should still run.
2021-10-13 13:42:04 -05:00
David Teigland
062ea3c418 fix syslog setting
Just setting lvm.conf level=N should not send messages to
syslog (now the journal by default.)

Sending messages to syslog should require setting lvm.conf
log { syslog=1 level=N }.
2021-10-11 17:11:01 -05:00
Marian Csontos
ca38251b10 make: generate 2021-10-07 12:42:44 -05:00
Vojtech Trefny
61bd5e5023 lvmdbusd: Use ID_FS_TYPE UDev property in udevwatch
'.ID_FS_TYPE_NEW' is a custom property added by an LVM UDev rule
which is now being removed and 'ID_FS_TYPE' has the same value.

Signed-off-by: Vojtech Trefny <vtrefny@redhat.com>
2021-10-07 12:42:44 -05:00
Marian Csontos
5ac4b662df configure: update 2021-10-07 12:42:43 -05:00
David Teigland
67722b3123 new udev autoactivation
new udev rule 69-dm-lvm.rules replaces
69-dm-lvm-meta.rules and lvm2-pvscan.service

udev rule calls pvscan directly on the added device

pvscan output indicates if a complete VG can be activated

udev env var LVM_VG_NAME_COMPLETE is used to pass complete
VG name from pvscan to the udev rule

udev rule uses systemd-run to run vgchange -aay <vgname>
2021-10-07 12:42:31 -05:00
David Teigland
bbf8e7db74 logging: to the systemd journal
Configure via lvm.conf log/journal or command line --journal.

Possible values:
"command" records command information.
"output" records default command output.
"debug" records full command debugging.

Multiple values can be set in lvm.conf as an array.
One value can be set in --journal which is added to
values set in lvm.conf
2021-10-07 12:06:49 -05:00
David Teigland
0b6782fa01 pvscan: add options listlvs listvg checkcomplete
pvscan --cache <dev>
    . read only dev
    . create online file for dev

pvscan --listvg <dev>
    . read only dev
    . list VG using dev

pvscan --listlvs <dev>
    . read only dev
    . list VG using dev
    . list LVs using dev

pvscan --cache --listvg [--checkcomplete] <dev>
    . read only dev
    . create online file for dev
    . list VG using dev
    . [check online files and report if VG is complete]

pvscan --cache --listlvs [--checkcomplete] <dev>
    . read only dev
    . create online file for dev
    . list VG using dev
    . list LVs using dev
    . [check online files and report if VG is complete]
    . [check online files and report if LVs are complete]

[--vgonline]
can be used with --checkcomplete, to enable use of a vg online
file.  This results in only the first pvscan command to see
the complete VG to report 'VG complete', and others will report
'VG finished'.  This allows the caller to easily run a single
activation of the VG.

[--udevoutput]
can be used with --cache --listvg --checkcomplete, to enable
an output mode that prints LVM_VG_NAME_COMPLETE='vgname' that
a udev rule can import, and prevents other output from the
command (other output causes udev to ignore the command.)

The list of complete LVs is meant to be passed to lvchange -aay,
or the complete VG used with vgchange -aay.

When --checkcomplete is used, lvm assumes that that the output
will be used to trigger event-based autoactivation, so the pvscan
does nothing if event_activation=0 and --checkcomplete is used.

Example of listlvs
------------------

$ lvs -a vg -olvname,devices
  LV     Devices
  lv_a   /dev/loop0(0)
  lv_ab  /dev/loop0(1),/dev/loop1(1)
  lv_abc /dev/loop0(3),/dev/loop1(3),/dev/loop2(1)
  lv_b   /dev/loop1(0)
  lv_c   /dev/loop2(0)

$ pvscan --cache --listlvs --checkcomplete /dev/loop0
  pvscan[35680] PV /dev/loop0 online, VG vg incomplete (need 2).
  VG vg incomplete
  LV vg/lv_a complete
  LV vg/lv_ab incomplete
  LV vg/lv_abc incomplete

$ pvscan --cache --listlvs --checkcomplete /dev/loop1
  pvscan[35681] PV /dev/loop1 online, VG vg incomplete (need 1).
  VG vg incomplete
  LV vg/lv_b complete
  LV vg/lv_ab complete
  LV vg/lv_abc incomplete

$ pvscan --cache --listlvs --checkcomplete /dev/loop2
  pvscan[35682] PV /dev/loop2 online, VG vg is complete.
  VG vg complete
  LV vg/lv_c complete
  LV vg/lv_abc complete

Example of listvg
-----------------

$ pvscan --cache --listvg --checkcomplete /dev/loop0
  pvscan[35684] PV /dev/loop0 online, VG vg incomplete (need 2).
  VG vg incomplete

$ pvscan --cache --listvg --checkcomplete /dev/loop1
  pvscan[35685] PV /dev/loop1 online, VG vg incomplete (need 1).
  VG vg incomplete

$ pvscan --cache --listvg --checkcomplete /dev/loop2
  pvscan[35686] PV /dev/loop2 online, VG vg is complete.
  VG vg complete
2021-10-07 12:06:49 -05:00
David Teigland
3e1316bb09 system_id: new appmachineid option
The new system_id_source="appmachineid" will cause
lvm to use an lvm-specific derivation of the machine-id,
instead of the machine-id directly.  This is now
recommended in place of using machineid.
2021-10-07 12:06:49 -05:00
David Teigland
6c22392a3f config: change default use_devicesfile to 1 2021-10-07 12:06:49 -05:00
David Teigland
02626cbd33 config: comment all default settings 2021-10-07 12:06:49 -05:00
Zdenek Kabelac
3cf97a737b cleanup: use dm_list_empty
Instant check for 'dm_list_size() == 0' without any size calc.
2021-10-06 15:43:31 +02:00
Zdenek Kabelac
197f6aaad7 cleanup: skip zeroing buffer overwritten by memcpy
Since the buffer is going to be overwritten by memcpy, reset only last
char to 0.

Also more use of DM_LIST_INIT list.h macro.
2021-10-06 15:43:31 +02:00
Zdenek Kabelac
79e65a3596 cleanup: all lvmcache_add users pass char with 0
No local copy needed, both users submit zero-end string as pv/vgid.
2021-10-06 15:43:31 +02:00
Zdenek Kabelac
5ccb373d86 cleanup: always initialize historical ptr
Set ptr for all paths.
2021-10-06 15:43:31 +02:00
Zdenek Kabelac
a841babaf7 cleanup: remove unused code 2021-10-06 15:43:31 +02:00
Zdenek Kabelac
5ea426e656 archiving: refactor code to allocate less memory
Do not store full path with each archived name reduces memory usage if
the directory has thousands of entries and just add 'dir' path when
needed.

Also emit info print message to a user if the total size of archived
files for a VG is more then 128MiB or 8192 files.

TODO: Consider wheather adding a new 'lvm.conf  archive{option}' to support
trimming these wild archive sizes can make situation better.
We already support retain_min && retain_days  - but if user is
generating too many and too large archives with minutes - maybe archiving
should be disabled by a user - as it's not producing anything largely usable
and just slows-down command ??
If we add 'retain_max & retain_max_size' the condition will go against
each other and we need to chose priorities.

mm
2021-10-06 15:42:53 +02:00
Zdenek Kabelac
98c57f7ce4 metadata: enhance internal error
Consider missing config tree from vg read to be an internal error
since we do not want to 'regenerate' this one in expesive parsing way.

Also if there is any failure on recreating committed VG, make it also
a 'vg_write' error.
2021-10-06 15:39:58 +02:00
Zdenek Kabelac
b7e9ec0cbf debug: fix stack tracing
Emit stack trace only on log_error path, and avoid on 'expected'
not-found path.
2021-10-06 15:39:58 +02:00
Zdenek Kabelac
e30f3c8410 metadata: simplify code 2021-10-06 15:39:58 +02:00
David Teigland
8e62cbb18e device_id: update stacked PVs for vgchange uuid
If a VG uuid is changed, update the device_id of any
PVs stacked on LVs in the changed VG.
2021-10-04 16:54:44 -05:00
David Teigland
939b4bc587 handle bad metadata text in vg_read path
Corrupt metadata text (with good mda header) was being handled
in the label_scan phase, but not in the vg_read phase.  This
was sufficient because metadata areas would always be read and
checksummed during label_scan (metadata parsing was skipped
previously as an optimization.)

This changed with the optimization in
commit 61a6f9905e
"metadata: optimize reading metadata copies in scan"

Now, some metadata areas will not be read and checksummed
at all during the label_scan phase, only during the vg_read
phase.  This means that bad metadata text may first be detected
in the vg_read phase.  So, add equivalent bad metadata handling
to the vg_read path to match the label_scan path.
2021-09-28 15:17:43 -05:00
Zdenek Kabelac
e3b4c365a4 debug: shorter code 2021-09-27 18:56:14 +02:00
Zdenek Kabelac
f74d30d411 cleanup: use already known lv size 2021-09-27 18:56:14 +02:00
Zdenek Kabelac
a8a958cc04 cleanup: reuse existing code for free path 2021-09-27 18:56:14 +02:00
Zdenek Kabelac
9668427fe8 cleanup: use first parameter uint
Easier with struct zeroing and matching assing of type uint.
2021-09-27 18:56:14 +02:00
Zdenek Kabelac
614d150a8c cov; matching enum type 2021-09-27 18:56:14 +02:00
Zdenek Kabelac
bf0d558067 cov: ignoring 2021-09-27 18:56:14 +02:00
Zdenek Kabelac
dab4acb8f8 make: build without versionsort
Reported-by: adamboardman of gemian
2021-09-27 18:56:14 +02:00
Zdenek Kabelac
df70dca995 make: opened can be needed for either defines case
Reported-by: adamboardman of gemian
2021-09-27 18:56:14 +02:00
Zdenek Kabelac
9971459d19 make: replace legacy use rindex with strrchr
Seems already dropped by some systems.

Reported-by: adamboardman of gemian
2021-09-27 18:56:14 +02:00
Zdenek Kabelac
e585c10fad make: fix compilation for undefined RAID_INTERNAL
Reported-by: adamboardman of gemian
2021-09-27 18:56:14 +02:00
Zdenek Kabelac
6c85ea50de make: fix compilation for some compiler
Reported-by: adamboardman of gemian
2021-09-27 18:56:14 +02:00
Zdenek Kabelac
ef21ed78ae utils: define macro for ffs
Provide ffs() macro using __builtin_ffs(), when there is missing
ffs() implementation in header file.

Reported-by: adamboardman of gemian
2021-09-27 18:56:14 +02:00
Zdenek Kabelac
6a186dd1e8 configure: replace AC_HELP_STRING with AS_
Upgrade to newer autoconf setup is approaching...
Will cause large set of configure changes.
2021-09-27 18:56:13 +02:00
Zdenek Kabelac
ff788ef19c configure: check ffs __builtin_ffs versionsort
Check for presence of ffs(), __builtin_ffs() and versionsort().
2021-09-27 18:56:13 +02:00
Zdenek Kabelac
27eef1b964 cov: make more obvious buffer is zero ended 2021-09-27 18:56:13 +02:00
Zdenek Kabelac
3a3aabb832 metadata: avoid excessive check of /etc/localtime
With larger metadata, decoding 'localtime()' for hinting time creation
of every LV may cause excessive check of /etc/localtime file.
Set TZ to ":/etc/localtime" so glibc reads this file just once
instead of check everytime if there has anything changed.
2021-09-27 18:56:13 +02:00
Zdenek Kabelac
61a6f9905e metadata: optimize reading metadata copies in scan
While being in lockless scanning phase, we can avoid reading and checking
matching metadata copies if we already know them from other PV
and just rely on matching metadata header information.

These copies will be examined later during locked metadata read/write
access.

This patch may postpone discovering some read failures to locked phase.
2021-09-27 18:56:13 +02:00
Zdenek Kabelac
24e90f9594 metadata: remember parsing size of VG metadata
When creating lvm2 metadata for VG, lvm2 allocate some buffer,
and if buffer is not big enough, the buffer is 'reallocated' bigger,
and whole metadata creation is repeated until metadata fits.
We can try to use 'previous' metadata size as hint to reduce looping
here.
2021-09-27 18:49:41 +02:00
Zdenek Kabelac
a42ea349f6 metadata: remember crc32 when writing vg metadata
Preserve computed crc32 check from first written PV, just like we
preserve generated metadata.

Also there is no need to call crc32 twice on wrapping buffer with 2 calcs,
result must be always the same as with single crc32 checking.
2021-09-27 18:49:41 +02:00
Zdenek Kabelac
a3352f08f6 dmsetup: fix measure handling
Previous patch f853a1bc7a enabled
ima measurement unconditionally for every status call,
but it needs to be set only for 'dmsetup measure' command.
2021-09-27 18:45:25 +02:00
David Teigland
e62a71f3dd lvmlockd: update error message
refer specifically to the "use_lvmlockd" setting in lvm.conf
2021-09-24 15:40:20 -05:00
Zdenek Kabelac
a1cb33b633 devicemapper: in sync with libdm 2021-09-23 16:49:58 +02:00
Alasdair G Kergon
f853a1bc7a libdm: dmsetup measure support for IMA
Add support for DM_IMA_MEASUREMENT_FLAG with
DM_TABLE_STATUS_CMD.

This feature requires DM version 4.45  (5.15+ kernels)
2021-09-23 16:49:28 +02:00
Zdenek Kabelac
707e7d762e devicemapper: add DM_NAME_LIST_FLAG
Match libdm part
2021-09-23 16:49:16 +02:00
Zdenek Kabelac
566c2f1828 libdm: support DM_NAME_LIST_FLAG
Kernel patch 8b638081bd4520f63db1defc660666ec5f65bc15
introduced support to return UUID in DM_LIST_DEVICES_CMD.

Useful when asking for UUID of each device where the list
could be now returned directly with NAME && UUID for each device.

Returning UUID is done in backward-compatible way. There's one unused
32-bit word value after the event number. This patch sets the bit
DM_NAME_LIST_FLAG_HAS_UUID if UUID is present and
DM_NAME_LIST_FLAG_DOESNT_HAVE_UUID if it isn't (if none of these bits is
set, then we have an old kernel that doesn't support returning UUIDs). The
UUID is stored after this word. The 'next' value is updated to point after
the UUID, so that old version of libdevmapper will skip the UUID without
attempting to interpret it.
2021-09-23 16:49:14 +02:00
Zdenek Kabelac
ee15065a0f gcc: match types 2021-09-22 17:18:50 +02:00