IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Convert fields into using a single status ioctl call per LV.
This is a bit tricky since when there are more complicated
stacks, at this moment its undefined which values should be shown.
It's clear we need to cache more then single ioctl per LV,
but also we need to define more explicitely relation between
reported values for snapshots.
This patch is not a final state, rather a transitional step.
It should not be giving more 'worst' values then previous
many-ioctl-calls-per-lv solution.
When there are duplicate devices for a PV, one device
is preferred and chosen to exist in the VG. The other
devices are not used by lvm, but are displayed by pvs
with a new PV attr "d", indicating that they are
unchosen duplicate PVs.
The "duplicate" reporting field is set to "duplicate"
when the PV is an unchosen duplicate, and that field
is blank for the chosen PV.
Specifying an output width of 0 now leads to a default minimum width
taken from the width of the column heading. (Most fields should use
this.)
Components of field names are generally separated by underscores (which
are optional at run-time). (Dropped 3 duplicate fields now covered by
this rule.)
Each field heading must be unique and generally doesn't have spaces
between words (which get capitalised) unless they are already short and
the fields are normally longer or clarity demands it.
The lv_full_ancestors reporting field is just like the existing
lv_ancestors field but it also takes into account any history and
indirect relations recorded.
The lv_historical reporting field is a simple binary field that reports
whether an LV is historical one ("historical" value or value of "1" displayed)
or not (blank string "" or value of "0" displayed).
Pair kernel_cache_settings with kernel_cache_policy.
There is very small chance in error case that the value in table
might be differnet from the value stored in metadata
so make it 'checkable'.
Fix reporting of Fail thin-pool target status
as attr[8] letter 'F'.
Report 'needs_check' status from thin-pool target via
attr field [4] (letter 'c'/'C'), and also via CheckNeeded field.
TODO: think about better name here?
TODO: lots of prop_not_implemented_set
For example:
$ pvs -o pv_name,vg_name,pv_in_use
PV VG InUse
/dev/sda vg used
/dev/sdb
/dev/sdc used
(sda is part of vg - it's used
sdb is not part of vg - it's not used
sdc is part of vg, but MDAs missing - it's used)
The associated devices,metadata_devices,seg_pe_ranges and
seg_metadata_le_ranges are reported as genuine string lists now.
This allows for using the items separately in -S|--select
(so searching for subsets etc.) and also it allows for
configuring the separator using report/list_item_separator
which may be useful in scripts (however, we'll enable this
only for seg_le_metadata_ranges and not for devices,seg_pe_ranges
and seg_metadata_devices for compatibility reasons - see following
patch).
Existing cache_settings field displays the settings which are
saved in metadata. Add new kernel_cache_settings fields to display
the settings which are currently used by kernel, including fields
for which default values are used.
This way users have complete view of the set of cache settings
supported (and which they can set) and their values which are used
at the moment by kernel.
For example:
$ lvs -o name,cache_policy,cache_settings,kernel_cache_settings vg
LV Cache Policy Cache Settings KCache Settings
cached1 mq migration_threshold=1024,write_promote_adjustment=2 migration_threshold=1024,random_threshold=4,sequential_threshold=512,discard_promote_adjustment=1,read_promote_adjustment=4,write_promote_adjustment=2
cached2 smq migration_threshold=1024 migration_threshold=1024
cached3 smq migration_threshold=2048
Thin pool discard mode set in metadata can be different from the one
actually used if any device underneath does not support that mode. Add
kernel_discard report field to make it possible to see this difference.
We already have pv_count to report number of PVs that a VG has based
on metadata.
This patch exposes the information about how many of these PVs are
missing which is also useful information for a VG. Wwe could count
the sum of pv_missing reporting fields for each PV in the VG before,
but the new field is practical when reporting VG as a whole and there's
no need to process each PV from VG alone.
Add metadata_devices and seg_metadata_le_ranges report fields.
Currently only defined for raid, but should probably be extended
to all other segment types that don't report all their device
usage in the 'devices' field.
This patch adds support for time values used in reporting fields.
The raw values are always stored as number of seconds since epoch.
The support that comes with this patch is the basic one which allows
only for recognition of strictly formatted date and time in selection
criteria (the format follows a subset of formats defined by ISO 8601):
date time timezone
date:
YYYY-MM-DD (or shortly YYYYMMDD)
YYYY-MM (shortly YYYYMM), auto DD=1
YYYY, auto MM=01 and DD=01
time:
hh:mm:ss (or shortly hhmmss)
hh:mm (or shortly hhmm), auto ss=0
hh (or shortly hh), auto mm=0, auto ss=0
timezone (always with + or - sign):
+hh:mm or -hh:mm (or shortly +hhmm or -hhmm)
+hh or -hh
Or directly the time (number of seconds) since Epoch (1970-01-01 00:00:00 UTC)
when the number value is prefixed by "@":
@number_of_seconds_since_epoch
This patch also adds aliases for comparison operators
used together with time values which are more intuitive
to use:
since (as alias for >=)
after (as alias for >)
until (as alias for <=)
before (as alias for <)
For example:
$ lvmconfig --type full report/time_format
time_format="%Y-%m-%d %T %z %Z [%s]"
$ lvs -o name,time vg
LV Time
lvol0 2015-06-28 21:25:41 +0200 CEST [1435519541]
lvol1 2015-06-30 03:25:43 +0200 CEST [1435627543]
lvol2 2015-04-26 14:52:20 +0200 CEST [1430052740]
lvol3 2015-06-30 14:52:23 +0200 CEST [1435668743]
$ lvs vg -o name,time -S 'time since "2015-04-26 15:00" && time until "2015-06-30"'
LV Time
lvol0 2015-06-28 21:25:41 +0200 CEST [1435519541]
lvol1 2015-06-30 03:25:43 +0200 CEST [1435627543]
lvol3 2015-06-30 14:52:23 +0200 CEST [1435668743]
$ lvs vg -o name,time -S 'time since "2015-04-26 15:00" && time until "2015-06-30 6:00"'
LV Time
lvol0 2015-06-28 21:25:41 +0200 CEST [1435519541]
lvol1 2015-06-30 03:25:43 +0200 CEST [1435627543]
$ lvs vg -o name,time -S 'time since @1435519541'
LV Time
lvol0 2015-06-28 21:25:41 +0200 CEST [1435519541]
lvol1 2015-06-30 03:25:43 +0200 CEST [1435627543]
lvol3 2015-06-30 14:52:23 +0200 CEST [1435668743]
This is basic time recognition support that is directly a part of
libdevmapper. Recognition of more free-form expressions will be a
part of subsequent patches.
Currently lvm2app properties have the following structure:
typedef struct lvm_property_value {
uint32_t is_settable:1;
uint32_t is_string:1;
uint32_t is_integer:1;
uint32_t is_valid:1;
uint32_t padding:28;
union {
const char *string;
uint64_t integer;
} value;
} lvm_property_value_t;
which assumes that numerical values were in the range of 0 to 2**64-1. However,
some of the properties were 'signed', like LV major/minor numbers and some
reserved values for properties that represent percentages. Thus when the
values were retrieved they were in two's complement notation. So for a -1
major number the API user would get a value of 18446744073709551615. The
API user could cast the returned value to an int64_t to handle this, but that
requires the API developer to look at the source code and determine when it
should be done.
This change modifies the return property structure to:
typedef struct lvm_property_value {
uint32_t is_settable:1;
uint32_t is_string:1;
uint32_t is_integer:1;
uint32_t is_valid:1;
uint32_t is_signed:1;
uint32_t padding:27;
union {
const char *string;
uint64_t integer;
int64_t signed_integer;
} value;
} lvm_property_value_t;
With this addition the API user can interrogate that the value is numerical,
(is_integer = 1) and subsequently check if it's signed (is_signed = 1) too.
If signed, then the API developer should use the union's signed_integer to
avoid casting.
This change maintains backwards compatibility as the structure size remains
unchanged and integer value remains unchanged. Only the additional bit
taken from the pad is utilized.
Bugzilla reference:
https://bugzilla.redhat.com/show_bug.cgi?id=838257
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Show full chain of ancestors and descendants for snapshots
(both thick and thin - in case of thick, the "ancestor" field
is actually equal to "origin" field as snapshots can't be
chained for thick snapshots).
These fields display current state as it is, they do not
display any history! If the snapshot chain is broken in
the middle, we don't report the historical origin (this
is going to be a part of another patch and a different
set of fields or just a switch for existing fields to
show ancestors and descendants with history included).
For example:
(origin --> snapshot)
lvol1 --> lvol2 --> lvol3 --> lvol4
\
--> lvol5 --> lvol6 --> lvol7 --> lvol8
$ lvs -o name,pool_lv,origin,ancestors,descendants vg
LV Pool Origin Ancestors Descendants
lvol1 pool lvol2,lvol3,lvol4,lvol5,lvol6,lvol7,lvol8
lvol2 pool lvol1 lvol1 lvol3,lvol4,lvol5,lvol6,lvol7,lvol8
lvol3 pool lvol2 lvol2,lvol1 lvol4
lvol4 pool lvol3 lvol3,lvol2,lvol1
lvol5 pool lvol2 lvol2,lvol1 lvol6,lvol7,lvol8
lvol6 pool lvol5 lvol5,lvol2,lvol1 lvol7,lvol8
lvol7 pool lvol6 lvol6,lvol5,lvol2,lvol1 lvol8
lvol8 pool lvol7 lvol7,lvol6,lvol5,lvol2,lvol1
Move the lvm1 sys ID into vg->lvm1_system_id and reenable the #if 0
LVM1 code. Still display the new-style system ID in the same
reporting field, though, as only one can be set.
Add a format feature flag FMT_SYSTEM_ON_PVS for LVM1 and disallow
access to LVM1 VGs if a new-style system ID has been set.
Treat the new vg->system_id as const.
This makes a difference when using selection criteria based on
these fields - if those fields are defined as DM_REPORT_FIELD_TYPE_SIZE
(in contrast to DM_REPORT_FIELD_TYPE_NUMBER), units are also
recognize in selection clause.
For example:
$ lvs -o+seg_start vg1/lv2
LV VG Attr LSize Start
lv2 vg1 -wi-a----- 12.00m 0
lv2 vg1 -wi-a----- 12.00m 8.00m
Before this patch:
$ lvs -o+seg_start --select 'seg_start=8m'
Found size unit specifier but numeric value expected for selection field seg_start.
Selection syntax error at 'seg_start=8m'.
Use 'help' for selection to get more help.
With this patch applied:
$lvs -o+seg_start --select 'seg_start=8m'
LV VG Attr LSize Start
lv2 vg1 -wi-a----- 12.00m 8.00m
(the same applies for ba_start and vg_free fields)
Rename original lv_error_when_full field to lv_when_full and also
convert it from binary field to string field displaying three
possible values: "error", "queueu" or "" (blank for undefined).
$ lvs vg/pool vg/pool1 vg/linear_lv -o+lv_when_full
LV VG Attr LSize Data% Meta% WhenFull
linear_lv vg -wi-a----- 4.00m
pool vg twi-aotz-- 4.00m 0.00 0.98 queue
pool1 vg twi-a-tz-- 4.00m 0.00 0.88 error
For -S|--select these synonyms are recognized:
"error" -> "error when full", "error if no space"
"queue" -> "queue when full", "queue if no space"
"" -> "undefined"
Add separate LVSINFOSTATUS field type for fields which display both
dm info-like and dm status-like information.
The internal interface is there with the introduction of LVSSTATUS
field type which can cope with the combination of LVSSTATUS
and LVSINFO field types (several fields).
However, till now, we considered that *single* field can display
either LVSINFO or LVSSTATUS, but not both at the same time.
Till now, we haven't had single field which needs both - hence
add LVSINFOSTATUS field type for such fields as we currently
need this for the lv_attr field which requires combination of
info and status.
This patch just adds interface for an ability to register such fields
(the code that copes with this is already in).
Recently the single 'status' code has been used for number of cache
features.
Extend the API a little bit to allow usage also for lv_attr_dup.
As the function itself is used in lvm2api - add a new function:
lv_attr_dup_with_info_and_seg_status() that is able to use
grabbed info & status information.
report_init() is now using directly passed lvdm struct pointer
which holds the infomation whether lv_info() was correctly obtained or
there was some error when trying to read it.
Move 'healt' attribute to status.
TODO convert raid function to use the already known status.
Support error_if_no_space feature for thin pools.
Report more info about thinpool status:
(out_of_data (D), metadata_read_only (M), failed (F) also as health
attribute.)
The cache mode of a new cache pool is always explicitly
included in the vg metadata. If a cache mode is not
specified on the command line, the cache mode is taken
from lvm.conf allocation/cache_pool_cachemode, which
defaults to "writethrough".
The cache mode can be displayed with lvs -o+cachemode.
The 'lv_type' field name was a bit misleading. Better one is 'lv_role'
since this fields describes what's the actual use of the LV currently -
its 'role'.
The lv_layout and lv_type fields together help with LV identification.
We can do basic identification using the lv_attr field which provides
very condensed view. In contrast to that, the new lv_layout and lv_type
fields provide more detialed information on exact layout and type used
for LVs.
For top-level LVs which are pure types not combined with any
other LV types, the lv_layout value is equal to lv_type value.
For non-top-level LVs which may be combined with other types,
the lv_layout describes the underlying layout used, while the
lv_type describes the use/type/usage of the LV.
These two new fields are both string lists so selection (-S/--select)
criteria can be defined using the list operators easily:
[] for strict matching
{} for subset matching.
For example, let's consider this:
$ lvs -a -o name,vg_name,lv_attr,layout,type
LV VG Attr Layout Type
[lvol1_pmspare] vg ewi------- linear metadata,pool,spare
pool vg twi-a-tz-- pool,thin pool,thin
[pool_tdata] vg rwi-aor--- level10,raid data,pool,thin
[pool_tdata_rimage_0] vg iwi-aor--- linear image,raid
[pool_tdata_rimage_1] vg iwi-aor--- linear image,raid
[pool_tdata_rimage_2] vg iwi-aor--- linear image,raid
[pool_tdata_rimage_3] vg iwi-aor--- linear image,raid
[pool_tdata_rmeta_0] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_1] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_2] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_3] vg ewi-aor--- linear metadata,raid
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
[pool_tmeta_rimage_0] vg iwi-aor--- linear image,raid
[pool_tmeta_rimage_1] vg iwi-aor--- linear image,raid
[pool_tmeta_rmeta_0] vg ewi-aor--- linear metadata,raid
[pool_tmeta_rmeta_1] vg ewi-aor--- linear metadata,raid
thin_snap1 vg Vwi---tz-k thin snapshot,thin
thin_snap2 vg Vwi---tz-k thin snapshot,thin
thin_vol1 vg Vwi-a-tz-- thin thin
thin_vol2 vg Vwi-a-tz-- thin multiple,origin,thin
Which is a situation with thin pool, thin volumes and thin snapshots.
We can see internal 'pool_tdata' volume that makes up thin pool has
actually a level10 raid layout and the internal 'pool_tmeta' has
level1 raid layout. Also, we can see that 'thin_snap1' and 'thin_snap2'
are both thin snapshots while 'thin_vol1' is thin origin (having
multiple snapshots).
Such reporting scheme provides much better base for selection criteria
in addition to providing more detailed information, for example:
$ lvs -a -o name,vg_name,lv_attr,layout,type -S 'type=metadata'
LV VG Attr Layout Type
[lvol1_pmspare] vg ewi------- linear metadata,pool,spare
[pool_tdata_rmeta_0] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_1] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_2] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_3] vg ewi-aor--- linear metadata,raid
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
[pool_tmeta_rmeta_0] vg ewi-aor--- linear metadata,raid
[pool_tmeta_rmeta_1] vg ewi-aor--- linear metadata,raid
(selected all LVs which are related to metadata of any type)
lvs -a -o name,vg_name,lv_attr,layout,type -S 'type={metadata,thin}'
LV VG Attr Layout Type
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
(selected all LVs which hold metadata related to thin)
lvs -a -o name,vg_name,lv_attr,layout,type -S 'type={thin,snapshot}'
LV VG Attr Layout Type
thin_snap1 vg Vwi---tz-k thin snapshot,thin
thin_snap2 vg Vwi---tz-k thin snapshot,thin
(selected all LVs which are thin snapshots)
lvs -a -o name,vg_name,lv_attr,layout,type -S 'layout=raid'
LV VG Attr Layout Type
[pool_tdata] vg rwi-aor--- level10,raid data,pool,thin
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
(selected all LVs with raid layout, any raid layout)
lvs -a -o name,vg_name,lv_attr,layout,type -S 'layout={raid,level1}'
LV VG Attr Layout Type
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
(selected all LVs with raid level1 layout exactly)
And so on...
