IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Since we take a lock inside vg_lock_newname() and we do a full
detection of presence of vgname inside all scanned labels,
there is no point to do this for second time to be sure
there is no such vg.
The only side-effect of such call would be a full validation of
some already exising VG metadata - but that's not the task for
vgcreate when create a new VG.
This call noticable reduces number of scans during 'vgcreate'.
Use similar logic as with text_vg_import_fd() and avoid repeated
parsing of same mda and its config tree for vgname_from_mda().
Remember last parsed vgname, vgid and creation_host in labeller
structure and if the metadata have the same size and checksum,
return this stored info.
TODO: The reuse of labeller struct is not ideal, some lvmcache API for
this functionality would be nicer.
When reading VG mda from multiple PVs - do all the validation only
when mda is seen for the first time and when mda checksum and length
is same just return already existing VG pointer.
(i.e. using 300PVs for a VG would lead to create and destroy 300 config trees....)
Previous versions of lvm will not obey the restrictions
imposed by the new system_id, and would allow such a VG
to be written. So, a VG with a new system_id is further
changed to force previous lvm versions to treat it as
read-only. This is done by removing the WRITE flag from
the metadata status line of these VGs, and putting a new
WRITE_LOCKED flag in the flags line of the metadata.
Versions of lvm that recognize WRITE_LOCKED, also obey the
new system_id. For these lvm versions, WRITE_LOCKED is
identical to WRITE, and the rules associated with matching
system_id's are imposed.
A new VG lock_type field is also added that causes the same
WRITE/WRITE_LOCKED transformation when set. A previous
version of lvm will also see a VG with lock_type as read-only.
Versions of lvm that recognize WRITE_LOCKED, must also obey
the lock_type setting. Until the lock_type feature is added,
lvm will fail to read any VG with lock_type set and report an
error about an unsupported lock_type. Once the lock_type
feature is added, lvm will allow VGs with lock_type to be
used according to the rules imposed by the lock_type.
When both system_id and lock_type settings are removed, a VG
is written with the old WRITE status flag, and without the
new WRITE_LOCKED flag. This allows old versions of lvm to
use the VG as before.
The seg_monitor did not display monitored status for thick snapshots
and mirrors (with mirror log *not* mirrored). The seg monitor did work
correctly even before for other segtypes - thins and raids.
Before (mirrors and snapshots, only mirrors with mirrored log properly displayed monitoring status):
[0] f21/~ # lvs -a -o lv_name,lv_layout,lv_role,seg_monitor vg
LV Layout Role Monitor
mirror mirror public
[mirror_mimage_0] linear private,mirror,image
[mirror_mimage_1] linear private,mirror,image
[mirror_mlog] linear private,mirror,log
mirror_with_mirror_log mirror public monitored
[mirror_with_mirror_log_mimage_0] linear private,mirror,image
[mirror_with_mirror_log_mimage_1] linear private,mirror,image
[mirror_with_mirror_log_mlog] mirror private,mirror,log monitored
[mirror_with_mirror_log_mlog_mimage_0] linear private,mirror,image
[mirror_with_mirror_log_mlog_mimage_1] linear private,mirror,image
thick_origin linear public,origin,thickorigin
thick_snapshot linear public,snapshot,thicksnapshot
With this patch applied (monitoring status displayed for all mirrors and snapshots):
[0] f21/~ # lvs -a -o lv_name,lv_layout,lv_role,seg_monitor vg
LV Layout Role Monitor
mirror mirror public monitored
[mirror_mimage_0] linear private,mirror,image
[mirror_mimage_1] linear private,mirror,image
[mirror_mlog] linear private,mirror,log
mirror_with_mirror_log mirror public monitored
[mirror_with_mirror_log_mimage_0] linear private,mirror,image
[mirror_with_mirror_log_mimage_1] linear private,mirror,image
[mirror_with_mirror_log_mlog] mirror private,mirror,log monitored
[mirror_with_mirror_log_mlog_mimage_0] linear private,mirror,image
[mirror_with_mirror_log_mlog_mimage_1] linear private,mirror,image
thick_origin linear public,origin,thickorigin
thick_snapshot linear public,snapshot,thicksnapshot monitored
If configuration setting is marked in config_setting.h with CFG_DISABLED
flag, default value is always used for such setting, no matter if it's defined
by user (in --config/lvm.conf/lvmlocal.conf).
A warning message is displayed if this happens:
For example:
[1] f21/~ # lvm dumpconfig --validate
WARNING: Configuration setting global/system_id_source is disabled. Using default value.
LVM configuration valid.
[1] f21/~ # pvs
WARNING: Configuration setting global/system_id_source is disabled. Using default value.
PV VG Fmt Attr PSize PFree
/dev/sdb lvm2 --- 128.00m 128.00m
...
Though vgremove operates per VG by definition, internally, it
actually means iterating over each LV it contains to do the
remove.
So we need to direct selection a bit in this case so that the
selection is done per-VG, not per-LV.
That means, use processing handle with void_handle.internal_report_for_select=0
for the process_each_lv_in_vg that is called later in vgremove_single fn.
We need to disable internal selection for process_each_lv_in_vg
here as selection is already done by process_each_vg which calls
vgremove_single. Otherwise selection would be done per-LV and not
per-VG as we intend!
An intra-release fix for commit 00744b053f.
Set ACCESS_NEEDS_SYSTEM_ID VG status flag whenever there is
a non-lvm1 system_id set. Prevents concurrent access from
older LVM2 versions.
Not set on VGs that bear a system_id only due to conversion
from lvm1 metadata.
Export _lvm1_system_id as generate_lvm1_system_id and call it in
vg_setup() so it is set before writing the metadata to disk
and not missing from the initial metadata backup file.
format_text processes both lvm2 on-disk metadata and metadata read
from other sources such as backup files. Add original_fmt field
to retain the format type of the original metadata.
Before this patch, /etc/lvm/archives would contain backups of
lvm1 metadata with format = "lvm2" unless the source was lvm1 on-disk
metadata.
The vg->lvm1_systemd_id needs to be initialized as all the code around
counts with that. Just like we initialize lvm1_system_id in vg_create
(no matter if it's actually LVM1 or LVM2 format), this patch adds this
init in alloc_vg as well so the rest of the code does not segfaul
when trying to access vg->lvm1_system_id.
In log messages refer to it as system ID (not System ID).
Do not put quotes around the system_id string when printing.
On the command line use systemid.
In code, metadata, and config files use system_id.
In lvmsystemid refer to the concept/entity as system_id.
Two new functions added in the init script: rh_status and rh_status_q.
First one to be used in status() and second one to be used in start(),
stop(), force_stop(). Check for 'dmeventd' added and print list of
lvs being monitored in status().
"!dev_cache_get(argv[i], cmd->full_filter) && !rescan_done" --> "!rescan_done && !dev_cache_get(argv[i], cmd->full_filter)
Check the simple condition first (variable), then the function return value
(which in this case certainly takes more time to evaluate) - save some time.
Two problems fixed by this patch:
- PV tags were not recognized at all when using them with pvs
report that has only label fields (regression since 2.02.105)
- incorrect persistent .cache file to be generated after pvs
report that has only label fields (regression since 2.02.106)
These bugs come from the transition from process_each_pv to
process_each_label introduced by commit
67a7b7a87d and commit
490226fc47 and related.
Commands that can never use foreign VGs begin with
cmd->error_foreign_vgs = 1. This tells the vg_read
lib layer to print an error as soon as a foreign VG
is read.
The toollib process_each layer also prints an error if a
foreign VG is read, but is more selective about it. It
won't print an error if the command did not explicitly
name the foreign VG. We want to silently ignore foreign VGs
unless a command attempts to use one explicitly.
So, foreign VG errors are printed from two different layers:
vg_read (lower layer) and process_each (upper layer).
Commands that use toollib process_each, only want errors from
the process_each layer, not from both layers. So, process_each
disables the lower layer vg_read error message by setting
error_foreign_vgs = 0.
Commands that do not use toollib process_each, want errors
from the vg_read layer, otherwise they would get no error
message. The original cmd->error_foreign_vgs setting
enables this error.
(Commands that are allowed to operate on foreign VGs always
begin with cmd->error_foreign_vgs = 0, and all the commands
in this group use toollib process_each with the selective
error reporting.)
If an LV is already rw but still ro in the kernel, allow -prw to issue a
refresh to try to change the kernel state to rw.
Intended for use after clearing activation/read_only_volume_list in
lvm.conf.
