IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Systemd preloads file descriptors for us and passes them in for
newly spawned daemon when using on-demand fifo (or socket)
based activation.
This patch adds checks for file descriptors preloaded by
systemd and uses them instead of opening the FIFOs again
to properly support on-demand FIFO-based activation.
(We'll change FIFOs to sockets soon - but still this
part of the code will stay almost the same.)
The filename to adjust the oom score was changed in 2.6.36.
We should use oom_score_adj instead of oom_adj (which is still
there under /proc, but it's scheduled for removal in August 2012).
New oom_score_adj uses a range from -1000 (OOM_SCORE_ADJ_MIN,
disable oom killing) to 1000 (OOM_SCORE_ADJ_MAX).
very reasonable amount of parallel access, although the hash tables may become
a point of contention under heavy loads. Nevertheless, there should be orders
of magnitude less contention on the hash table locks than we currently have on
block device scanning.
are affected by the move. (Currently it's possible for I/O to become
trapped between suspended devices amongst other problems.
The current fix was selected so as to minimise the testing surface. I
hope eventually to replace it with a cleaner one that extends the
deptree code.
Some lvconvert scenarios still suffer from related problems.
allocates these buffers in such way it adds memory page for each such buffer
and size of unlock memory check will mismatch by 1 or 2 pages.
This happens when we print or read lines without '\n' so these buffers are
used. To avoid this extra allocation, use setvbuf to set these bufffers ahead.
Signed-off-by: Zdenek Kabelac <zkabelac@redhat.com>
Reviewed-by: Milan Broz <mbroz@redhat.com>
Reviewed-by: Petr Rockai <prockai@redhat.com>
'a small step' towards cleaner shutdown sequence.
Normally clvmd doens't care about unreleased memory on exit -
but for valgrind testing it's better to have them cleaned all.
So - few things are left on exit path - this patch starts to remove
just some of them.
1. lvm_thread_fs is made as a thread which could be joined on exit()
2. memory allocated to local_clien_head list is released.
(this part is somewhat more complex if the proper reaction is
needed - and as it requires some heavier code moving - it will
be resolved later.
Fix 2 more functions sending cluster messages to avoid passing uninitilised bytes
and compensate 1 extra byte attached to the message from the clvm_header.args[1]
member variable.
Fixing few issues:
struct clvm_header contains 'char args[1]' - so adding '+ 1' here
for message length calculation is 1 byte off.
Message with last byte uninitialized is then passed to write function.
Update also related arglen.
Initialise xid and clintid to 0.
Memory allocation is checked for NULL
- returned char not needed to be explicitly const
- warn if pipe() fails in clvmd (more fixes here needed for error paths...)
- assign (and ignore) read() output in drain buffer
Fixing some const warnings - with API change in:
int vg_extend(struct volume_group *vg, int pv_count, const char *const *pv_names,
Change is needed - as lvm2api expects const behaviour here.
So vg_extend() is doing local strdup for unescaping.
skip_dev_dir return const char* from const char* vg_name.
Rest of the patch is cleanup of related warnings.
Also using dm_report_filed_string() API change to simplify
casting in _string_disp and _lvname_disp.
New strategy for memory locking to decrease the number of call to
to un/lock memory when processing critical lvm functions.
Introducing functions for critical section.
Inside the critical section - memory is always locked.
When leaving the critical section, the memory stays locked
until memlock_unlock() is called - this happens with
sync_local_dev_names() and sync_dev_names() function call.
memlock_reset() is needed to reset locking numbers after fork
(polldaemon).
The patch itself is mostly rename:
memlock_inc -> critical_section_inc
memlock_dec -> critical_section_dec
memlock -> critical_section
Daemons (clmvd, dmevent) are using memlock_daemon_inc&dec
(mlockall()) thus they will never release or relock memory they've
already locked memory.
Macros sync_local_dev_names() and sync_dev_names() are functions.
It's better for debugging - and also we do not need to add memlock.h
to locking.h header (for memlock_unlock() prototyp).
results in clvmd deadlock
When a logical volume is activated exclusively in a cluster, the
local (non-cluster-aware) target is used. However, when creating
a snapshot on the exclusive LV, the resulting suspend/resume fails
to load the appropriate device-mapper table - instead loading the
cluster-aware target.
This patch adds an 'exclusive' parameter to the pertinent resume
functions to allow for the right target type to be loaded.
activated.
In order to achieve this, we need to be able to query whether
the origin is active exclusively (a condition of being able to
add an exclusive snapshot).
Once we are able to query the exclusive activation of an LV, we
can safely create/activate the snapshot.
A change to 'hold_lock' was also made so that a request to aquire
a WRITE lock did not replace an EX lock, which is already a form
of write lock.
Remove temporaly added fs_unlock() calls to fix clmvd usablity.
Now when the message passing is properly working - they are no longer needed.
Simplify no_locking check for VG unlock - as message is always send
for all targets - clustered & non-clustered.
Thanks to CLVMD_CMD_SYNC_NAMES propagation fix the message passing started
to work. So starts to send a message before the VG is unlocked.
Removing also implicit sync in VG unlock from clmvd as now the message
is delievered and processed in do_command().
Also add support for this new message into external locking
and mask this event from further processing.
This is better way how to fix clustered synchronization with udev.
As the code for message passing needs fixed - put currently
fs_unlock() after every active/deactive command in clvmd to
ensure nodes are properly created in time.
Instead of implicitly syncing udev operation in clustered and
file locking code - call synchronization directly in lock_vol() when
the operation unlocks VG
The problem is missing implicit fs_unlock() in the no_locking code.
This is used with --sysinit on read-only filesystem locking dir.
In this case vgchange -ay could exit before all udev nodes are properly
synchronised and may cause problems with accessing such node right after
vgchange --sysinint command is finished.
Add test case for vgchange --sysinit.
return lockspace reference (even if lockspace already exists)
and thus increases DLM lockspace count. It means that after
clvmd restart the lockspace is still in use.
(The only way to clean environment to enable clean cluster
shutdown is call "dlm_tool leave clvmd" several times.)
Because only one clvmd can run in time, we can use simpler logic,
try to open lockspace with dlm_open_lockspace() and only if it fails
try to create new one. This way the lockspace reference doesn not
increase.
Very easily reproducible with "clvmd -S" command.
Patch also fixes return code when clvmd_restart fails and fixes
double free if debug option was specified during restart.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=612862
Stop calling fs_unlock() from lv_de/activate().
Start using internal lvm fs cookie for dm_tree.
Stop directly calling dm_udev_wait() and
dm_tree_set/get_cookie() from activate code -
it's now called through fs_unlock() function.
Add lvm_do_fs_unlock()
Call fs_unlock() when unlocking vg where implicit unlock solves the
problem also for cluster - thus no extra command for clustering
environment is required - only lvm_do_fs_unlock() function is added
to call lvm's fs_unlock() while holding lvm_lock mutex in clvmd.
Add fs_unlock() also to set_lv() so the command waits until devices
are ready for regular open (i.e. wiping its begining).
Move fs_unlock() prototype to activation.h to keep fs.h private
in lib/activate dir and not expose other functions from this header.
Variable 'ret' assigned from _do_event() was actually not used and replaced with next
assignment without any read of the returned value.
Code is reformated - so the error path is put in the if() branch and normal
code is put after the 'if' together with FIXME comment.
FIXME lowprio: logging needs to be fixed in this code,
- multiple log_errors are printed, stacks are missing...
Call for pthread_join() does not set errno value even though return values
looks like that. For now assign errno from return value and still use
strerror() to print some error message as this seems to be commonly used.
Add also log_sys_error() message for error close of local pipe.
