1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

1973 Commits

Author SHA1 Message Date
Alasdair G Kergon
80bcdb93ff filters: check for mpath before opening devs
Split out the partitioned device filter that needs to open the device
and move the multipath filter in front of it.

When a device is multipathed, sending I/O to the underlying paths may
cause problems, the most obvious being I/O errors visible to lvm if a
path is down.

Revert the incorrect <backtrace> messages added when a device doesn't
pass a filter.

Log each filter initialisation to show sequence.

Avoid duplicate 'Using $device' debug messages.
2013-08-13 23:26:58 +01:00
Petr Rockai
0da72743ca vgck: Fix #894136, notice on-disk corruption in spite of lvmetad. 2013-08-13 23:25:49 +02:00
Alasdair G Kergon
1a1d3a10ff vgchange: require confirmation with -c and no VGs
Too many people have been running 'vgchange -cy' by mistake
so add a confirmation prompt.  Use --yes to bypass this.
2013-08-13 18:20:11 +01:00
Jonathan Brassow
bb457adbb6 RAID: Fix bug making lvchange unable to change recovery rate for RAID
Commit ID 8615234c0f failed to include
the actual code changes that were made to fix the bug.  Instead, all
tests went in to validate the bug fix.  This patch adds the missing
code changes.
2013-08-12 12:43:47 -05:00
Jonathan Brassow
8615234c0f RAID: Fix bug making lvchange unable to change recovery rate for RAID
1) Since the min|maxrecoveryrate args are size_kb_ARGs and they
   are recorded (and sent to the kernel) in terms of kB/sec/disk,
   we must back out the factor multiple done by size_kb_arg.  This
   is already performed by 'lvcreate' for these arguments.
2) Allow all RAID types, not just RAID1, to change these values.
3) Add min|maxrecoveryrate_ARG to the list of 'update_partial_unsafe'
   commands so that lvchange will not complain about needing at
   least one of a certain set of arguments and failing.
4) Add tests that check that these values can be set via lvchange
   and lvcreate and that 'lvs' reports back the proper results.
2013-08-09 17:09:47 -05:00
Zdenek Kabelac
e583ff3d2c thin: thin pool can't be external origin
Avoid trying to convert thin-pool to external origin.
2013-08-09 23:04:30 +02:00
Jonathan Brassow
b15278c3dc Mirror/RAID1: When up|down-converting default to segtype of current LV
If there is no RAID support in the kernel but the default mirror
segtype is "raid1", converting legacy mirrors can be problematic.
For example, changing the log type or converting a mirror to a linear
LV does not require the RAID modules to be present.  However, because
lp->segtype is set to be RAID1 by the configuration file, the command
fails.

We should only be setting lp->segtype when converting mirrors if it is
going to change (e.g. to linear or between mirror types).
2013-08-07 16:01:45 -05:00
Zdenek Kabelac
139a62fc0b thin: use pipe_open instead of popen
Use new function to directly exec command and read its output.
2013-08-06 16:19:31 +02:00
Peter Rajnoha
41e64b72ab thin: chunk_size check already part of get_profilable_pool_params fn 2013-08-06 11:46:48 +02:00
Peter Rajnoha
e195b5227e thin: apply VG profile if creating a new thin pool
When creating a new thin pool and there's no profile requested
via "lvcreate --profile ...", inherit any VG profile if it's attached.

Currently this applies to these settings:
  allocation/thin_pool_chunk_size
  allocation/thin_pool_discards
  allocation/thin_pool_zero
2013-08-06 11:42:40 +02:00
Zdenek Kabelac
de0cba0e2d thin: initial --repair support for pools
Initial basic support for repair.
It currently takes pool metadata spare volume, which
is used for recovery.  New spare is created if the volume
is successfuly repaired.

After the operation the previous _tmeta volume is moved
into  _tmeta%d volume and if everything is ok, this volume
could be removed.
New _tmeta needs to be pvmoved to proper place and also
converted to i.e. mirror if it should be mirrored.

Later version will try to automate some steps here.
2013-07-31 15:32:36 +02:00
Alasdair G Kergon
d13e87b9ef cleanup: comments and a message 2013-07-24 22:10:37 +01:00
Zdenek Kabelac
da5284a500 thin: lvconvert cannot convert pool to mirror
Suggest to use _tdata and _tmeta devices for that.
This fixes regression from too relaxed change in
f1d5f6ae81

Without this patch there are some empty LVs created before
mirror code recognizes it cannot continue.

(in release fix)
2013-07-24 17:17:19 +02:00
Jonathan Brassow
d00d45a8b6 Clean-up: Addressing a few FIXME's
Three fixme's addressed in this commit:
1) lib/metadata/lv_manip.c:_calc_area_multiple() - this could be
   safely changed to a comment explaining that currently because
   RAID10 can only have a 2-way mirror, we don't need to know the
   number of stripes.  However, we will need to know that in the
   future if RAID10 is to support more than 2-way mirroring.

2) lib/metadata/mirror.c:_delete_lv() - should have been calling
   _activate_lv_like_model() with 'mirror_lv'.  This is because
   'mirror_lv' is the LV that the overall operation is being
   performed on.  We need to use this LV as the basis for
   determining whether to activate locally, or across the
   cluster, etc.

3) tools/lvcreate.c:_lvcreate_params() - Minor clean-up.  If
   '-m 0' is given, treat it as though the mirroring argument
   was not given (i.e. as though the requested segment type
   was 'stripe' and not mirror).
2013-07-23 14:46:22 -05:00
Peter Rajnoha
31de670318 lvconvert: add more checks for lvconvert --type
The --type mirror requires -m/--mirrrors:

  lvconvert --type mirror vg/lvol0
    --type mirror requires -m/--mirrors
    Run `lvconvert --help' for more information.

The --type raid* is allowed (the checks already existed):

  lvconvert --type raid10 vg/lvol0
    Converting the segment type for vg/lvol0 from linear to raid10 is not yet supported.

The --type snapshot is a synonym to -s/--snapshot:

  lvconvert -s vg/lvol0 vg/lvol1
    Logical volume lvol1 converted to snapshot.

  lvconvert --type snapshot vg/lvol0 vg/lvol1
    Logical volume lvol1 converted to snapshot.

All the other segment types are not supported, e.g.:

  lvconvert --type zero vg/lvol0
    Conversion using --type zero is not supported.
    Run `lvconvert --help' for more information.
2013-07-23 17:13:54 +02:00
Alasdair G Kergon
3670fe92ba cleanup: suppress compiler warning 2013-07-23 13:32:47 +01:00
Petr Rockai
3fdb45d040 pvscan: Respect lvmetad (global) filter in --cache w/ a device. 2013-07-22 15:05:39 +02:00
Zdenek Kabelac
f1d5f6ae81 lvconvert: drop limit on thin pool conversion 2013-07-22 12:41:22 +02:00
Zdenek Kabelac
c394c2a624 dumpconfig: check conf tree was created
Missing error path.
2013-07-22 12:41:21 +02:00
Alasdair G Kergon
ccc29f17b6 cmdline: support ARG_GROUPABLE in merge_synonym 2013-07-19 20:37:43 +01:00
Alasdair G Kergon
90a09559ed commandline: add prefix aliases for raid options
Accept --raidwritemostly as well as --writemostly etc.
2013-07-19 19:24:54 +01:00
Zdenek Kabelac
ef3a1a0f8a thin: vgsplit and vgmerge spare support
When spliting a VG with spare, update to which VG it will belong.

When merging and both VGs have spare, unmark the smaller one first.
2013-07-18 18:22:44 +02:00
Zdenek Kabelac
aab53f46ee thin: add lvconvert pool metadata spare
Support poolmetadataspare when convering volumes into thin pool.
Same rules applied as with lvcreate.
2013-07-18 18:22:44 +02:00
Zdenek Kabelac
3075784955 thin: add spare lvcreate support
Add --poolmetadataspare option and creates and handles
pool metadata spare lv when thin pool is created.
With default setting 'y' it tries to ensure, spare has
at least the size of created LV.
2013-07-18 18:22:44 +02:00
Zdenek Kabelac
460d0254eb thin: add pool metadata spare lv support
Add support for pool's metadata spare volume.
2013-07-18 18:22:43 +02:00
Zdenek Kabelac
20187fc190 cleanup: use dm_list_empty
Check for empty list directly.
2013-07-18 18:22:42 +02:00
Zdenek Kabelac
9ba7783350 cleanup: update comments
Add and indent.
2013-07-15 15:40:46 +02:00
Peter Rajnoha
ab789c1bcf tools: add --setactivationskip and --ignoreactivationskip to vgchange/lvchange
The lvchange has both -k/--setactivationskip and
-K/--ignoreactivationskip option available for use.

The vgchange has only -K/--ignoreactivationskip, but
not the -k/--setactivationskip as the ACTIVATION_SKIP
flag is an LV property, not a VG one and so we change it
only by using the lvchange...
2013-07-12 20:49:57 +02:00
Peter Rajnoha
7dc8c84b18 activation: add support for skipping activation of selected LVs
Also add -k/--setactivationskip y/n and -K/--ignoreactivationskip
options to lvcreate.

The --setactivationskip y sets the flag in metadata for an LV to
skip the LV during activation. Also, the newly created LV is not
activated.

Thin snapsots have this flag set automatically if not specified
directly by the --setactivationskip y/n option.

The --ignoreactivationskip overrides the activation skip flag set
in metadata for an LV (just for the run of the command - the flag
is not changed in metadata!)

A few examples for the lvcreate with the new options:

  (non-thin snap LV => skip flag not set in MDA + LV activated)
  raw/~ $ lvcreate -l1 vg
    Logical volume "lvol0" created
  raw/~ $ lvs -o lv_name,attr vg/lvol0
    LV    Attr
    lvol0 -wi-a----

  (non-thin snap LV + -ky => skip flag set in MDA + LV not activated)
  raw/~ $ lvcreate -l1 -ky vg
    Logical volume "lvol1" created
  raw/~ $ lvs -o lv_name,attr vg/lvol1
    LV    Attr
    lvol1 -wi------

  (non-thin snap LV + -ky + -K => skip flag set in MDA + LV activated)
  raw/~ $ lvcreate -l1 -ky -K vg
    Logical volume "lvol2" created
  raw/~ $ lvs -o lv_name,attr vg/lvol2
    LV    Attr
    lvol2 -wi-a----

  (thin snap LV => skip flag set in MDA (default behaviour) + LV not activated)
  raw/~ $ lvcreate -L100M -T vg/pool -V 1T -n thin_lv
    Logical volume "thin_lv" created
  raw/~ $ lvcreate -s vg/thin_lv -n thin_snap
    Logical volume "thin_snap" created
  raw/~ $ lvs -o name,attr vg
    LV        Attr
    pool      twi-a-tz-
    thin_lv   Vwi-a-tz-
    thin_snap Vwi---tz-

  (thin snap LV + -K => skip flag set in MDA (default behaviour) + LV activated)
  raw/~ $ lvcreate -s vg/thin_lv -n thin_snap -K
    Logical volume "thin_snap" created
  raw/~ $ lvs -o name,attr vg/thin_lv
    LV      Attr
    thin_lv Vwi-a-tz-

  (thins snap LV + -kn => no skip flag in MDA (default behaviour overridden) + LV activated)
  [0] raw/~ # lvcreate -s vg/thin_lv -n thin_snap -kn
    Logical volume "thin_snap" created
  [0] raw/~ # lvs -o name,attr vg/thin_snap
    LV        Attr
    thin_snap Vwi-a-tz-
2013-07-12 20:39:07 +02:00
Peter Rajnoha
4d19fa9582 lvchange: backup VG after changing profile 2013-07-11 12:25:10 +02:00
Peter Rajnoha
953a438e93 dumpconfig: add --type profilable
The --type profilable shows all config settings that
are customizable by profiles:

  raw/~ $ lvm dumpconfig --type profilable
  allocation {
	  thin_pool_zero=1
	  thin_pool_discards="passdown"
	  thin_pool_chunk_size=64
  }
  activation {
	  thin_pool_autoextend_threshold=100
	  thin_pool_autoextend_percent=20
  }
2013-07-09 10:00:47 +02:00
Alasdair G Kergon
f56a1819e9 tools: remove metadata-exported.h
metadata-exported.h is included by tools.h
2013-07-09 03:07:55 +01:00
Alasdair G Kergon
9d5bdc91ca tools: remove metadata.h 2013-07-09 02:51:24 +01:00
Alasdair G Kergon
1280a3c7ed tools: remove metadata.h from pvresize/vgck 2013-07-09 02:41:56 +01:00
Alasdair G Kergon
8adddbf101 pvcreate: remove metadata.h header
Files in tools/ should only use metadata-exported.h not metadata.h.
Rename pvcreate_locked to pvcreate_single.
2013-07-09 02:37:56 +01:00
Alasdair G Kergon
dd302daf64 report: remove LV_CREATE_PARAMS report type
Remove LV_CREATE_PARAMS from lib/report as it is not a type of metadata.
Added by 4d5de8322b
2013-07-09 02:06:29 +01:00
Peter Rajnoha
5ed7d0cf1d dumpconfig: add --mergedconfig option
Normally, the lvm dumpconfig processes only the configuration tree
that is at the top of the cascade. Considering the cascade is:

  CONFIG_STRING -> CONFIG_PROFILE -> CONFIG_MERGED_FILES/CONFIG_FILE

...then:

  (dumpconfig of lvm.conf only)
  raw/~ $ lvm dumpconfig allocation
  allocation {
	  maximise_cling=1
	  mirror_logs_require_separate_pvs=0
	  thin_pool_metadata_require_separate_pvs=0
	  thin_pool_chunk_size=64
  }

  (dumpconfig of selected profile configuration only)
  raw/~ $ lvm dumpconfig --profile test allocation
  allocation {
	  thin_pool_chunk_size=8
	  thin_pool_discards="passdown"
	  thin_pool_zero=1
  }

  (dumpconfig of given --config configuration only)
  raw/~ $ lvm dumpconfig --config 'allocation{thin_pool_chunk_size=16}' allocation
  allocation {
	  thin_pool_chunk_size=16
  }

The --mergedconfig option causes the configuration cascade to be
merged before processing it with dumpconfig:

  (dumpconfig of merged selected profile and lvm.conf)
  raw/~ $ lvm dumpconfig --profile test allocation --mergedconfig
  allocation {
	  maximise_cling=1
	  thin_pool_zero=1
	  thin_pool_discards="passdown"
	  mirror_logs_require_separate_pvs=0
	  thin_pool_metadata_require_separate_pvs=0
	  thin_pool_chunk_size=8
  }

  (dumpconfig merged given --config and selected profile and lvm.conf)
  raw/~ $ lvm dumpconfig --profile test --config 'allocation{thin_pool_chunk_size=16}' allocation --mergedconfig
  allocation {
	  maximise_cling=1
	  thin_pool_zero=1
	  thin_pool_discards="passdown"
	  mirror_logs_require_separate_pvs=0
	  thin_pool_metadata_require_separate_pvs=0
	  thin_pool_chunk_size=16
  }

Hence with the --mergedconfig, we are able to see the
configuration that is actually used when processing any
LVM command while using any combination of --config/--profile
options together with lvm.conf file.
2013-07-08 16:05:56 +02:00
Peter Rajnoha
661406a417 config: fix use of last config check status if creating CFG_DEF_TREE_MISSING tree
When CFG_DEF_TREE_MISSING is created, it needs to know the status
of the check done on the tree used (the CFG_USED flag).

This bug was introduced with f1c292cc38
"make it possible to run several instances of configuration check at
once". This patch separated the CFG_USED and CFG_VALID flags in
a separate 'status' field in struct cft_check_handle.

However, when creating some trees, like CFG_DEF_TREE_MISSING,
we need this status to do a comparison with full config definition
to determine which items are missing and for which default values
were used. Otherwise, all items would be considered missing.

So, pass this status in a new field called 'check_status' in
struct config_def_tree_spec that defines how the (dumpconfig) tree
should be constructed (and this struct is passed to
config_def_create_tree fn then).
2013-07-08 15:57:49 +02:00
Peter Rajnoha
f5584d4203 cleanup: cleanup dumpconfig code 2013-07-08 15:46:19 +02:00
Zdenek Kabelac
edf5cae679 pvremove: stack trace
Stack trace error.
Remove unused var.
2013-07-08 14:01:41 +02:00
Zdenek Kabelac
ccf3dd60f2 cleanup: remove tab 2013-07-08 14:01:41 +02:00
Zdenek Kabelac
c5d253f315 cleanup: use arg value
Use defined ARG_COUNT for the last element
2013-07-08 14:01:41 +02:00
Alasdair G Kergon
7c6526aae2 lvresize: separate validation from action
Start separating the validation from the action in the basic lvresize
code moved to the library.
Remove incorrect use of command line error codes from lvresize library
functions.  Move errors.h to tools directory to reinforce this,
exporting public versions of the error codes in lvm2cmd.h for dmeventd
plugins to use.
2013-07-06 03:28:21 +01:00
Zdenek Kabelac
a0ce432829 lvconvert: fix last commit
Condition needs to check for passed in pool_metadata_lv_name
which needs to be renamed to _tmeta, for !pool_metadata_lv_name
it's already created with correct _tmeta name.
2013-07-04 14:02:27 +02:00
Zdenek Kabelac
969c87fa5b thin: swap if branch
Move shorter if branch in front.
Use buffer for _tmeta and _tdata names so too long name
of LV is earlier detected.
2013-07-04 13:33:41 +02:00
Zdenek Kabelac
f88f5a1ca3 thin: move alloc_pool_metadata
Move function from /tool to /lib to thin_manip.c
Since lvm2api will need to move many things into /lib anyway.
2013-07-04 13:33:41 +02:00
Zdenek Kabelac
6f335ffa35 sigint: improve logic on for sigint reaction
Fix and improve handling on sigint.

Always check for signal presence *before* calling of command,
so it will not call the command when break was hit.

If the command has been finished succesfully there is
no problem to mark the command ok and not report interrupt at all.

Fix cuple related stack; reports and assignments.
2013-07-03 14:46:42 +02:00
Zdenek Kabelac
eeb164b50f lvconvert: use proper error path
VG needs to be released in this error path
2013-07-03 14:44:51 +02:00
Mike Snitzer
fe09d84668 lvconvert: Rename _swap_lv to _swap_lv_identifiers and move to allow an additional user 2013-07-02 17:02:25 -04:00
Mike Snitzer
f9e0adcce5 snapshot: Rename snapshot segment returning methods from find_*_cow to find_*_snapshot
find_cow -> find_snapshot, find_merging_cow -> find_merging_snapshot.
Will thin snapshot code to reuse these methods without confusion.
2013-07-02 16:26:03 -04:00
Tony Asleson
50db109e20 liblvm: Moved additional pv resize code
The pv resize code required that a lvm_vg_write be done
to commit the change.  When the method to add the ability
to list all PVs, including ones that are not assocated with
a VG we had no way for the user to make the change persistent.
Thus additional resize code was move and now liblvm calls into
a resize function that does indeed write the changes out, thus
not requiring the user to explicitly write out he changes.

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2013-07-02 14:24:34 -05:00
Tony Asleson
6d6ccded35 lib2app: Added PV create. V2
V2: Correct call to lock_vol

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2013-07-02 14:24:34 -05:00
Tony Asleson
e33ac7b1ed lvm2app: Implement lvm_pv_remove V2
Code move and changes to support calling code from
command line and from library interface.

V2 Change lock_vol call

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2013-07-02 14:24:34 -05:00
Tony Asleson
c43ce46ba7 lvm2app: Move core lv re-size code (v6)
Moved to allow use from command line and for library use.

v3,v4,v5,v6: rebase changes

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2013-07-02 14:24:33 -05:00
Tony Asleson
9d550cfc36 lvm2app: Rework argument handling for lv resize
Extend the lv resize parameter structure to contain everything
the re-size functions need so that the command line does not
need to be present for lower level calls when we call from
library functions.

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2013-07-02 14:24:33 -05:00
Tony Asleson
60c78e6aef lvm2app: Move percent_of_extents to lvm-percent.[h|c]
Signed-off-by: Tony Asleson <tasleson@redhat.com>
2013-07-02 14:24:33 -05:00
Tony Asleson
4d5de8322b lvm2app: Add thin and thin pool lv creation V5
Add thin and thin pool lv creation support to lvm library

This is Mohan's thinp patch, re-worked to include suggestions
from Zdenek and Mohan.

V2: Remove const lvm_lv_params_create_thin
    Add const lvm_lv_params_skip_zero_get

V3: Changed get/set to use generic functions like current
    property

V4: Corrected macro in properties.c

V5: Fixed a bug in liblvm/lvm_lv.c function lvm_lv_create.
    incorrectly used pool instead of lv_name when doing the
    find_lv_in_vg call.

Based on work done by M. Mohan Kumar <mohan@in.ibm.com>

Signed-off-by: Tony Asleson <tasleson@redhat.com>
2013-07-02 14:24:33 -05:00
Peter Rajnoha
24a84549a8 thin: make selected thinp settings profilable
These settins are customizable by profiles:

	allocation/thin_pool_zero
	allocation/thin_pool_discards
	allocation/thin_pool_chunk_size
	activation/thin_pool_autoextend_threshold
	activation/thin_pool_autoextend_percent
2013-07-02 15:22:11 +02:00
Peter Rajnoha
f1c292cc38 config: make it possible to run several instances of configuration check at once
Before, the status of the configuration check (config_def_check fn call)
was saved directly in global configuration definitinion array (as part
of the cfg_def_item_t/flags)

This patch introduces the "struct cft_check_handle" that defines
configuration check parameters as well as separate place to store
the status (status here means CFG_USED and CFG_VALID flags, formerly
saved in cfg_def_item_t/flags). This struct can hold config check
parameters as well as the status for each config tree separately,
thus making it possible to run several instances of config_def_check
without interference.
2013-07-02 15:22:11 +02:00
Peter Rajnoha
8769033e07 toolcontext: add a few comments for struct cmd_context and rename config_valid -> config_initialized
Just to make it more clear and also not to confuse
config_valid with check against config definition
(and its 'valid' flag within the config defintion tree).
2013-07-02 15:22:11 +02:00
Peter Rajnoha
0cd4794735 tools: add support for changing configuration profile for existing volumes (vgchange/lvchange)
The command to change the profile for existing VG/LV:
	"vgchange/lvchange --profile <profile_name>"

The command to detach any existing profile from VG/LV:
	"vgchange/lvchange --detachprofile"
2013-07-02 15:22:10 +02:00
Peter Rajnoha
e21e38cf74 metadata: add support for storing profile name in metadata (during vgcreate/lvcreate)
If "vgcreate/lvcreate --profile <profile_name>" is used, the profile
name is automatically stored in metadata for making it possible to
load it automatically next time the VG/LV is used.
2013-07-02 15:19:09 +02:00
Peter Rajnoha
d6a91da4be config: add profile arg to find_config_tree_bool 2013-07-02 15:19:09 +02:00
Peter Rajnoha
50bf2c0db1 config: add profile arg to find_config_tree_int 2013-07-02 15:19:09 +02:00
Peter Rajnoha
06dd66af54 config: add profile arg to find_config_tree_str 2013-07-02 15:19:09 +02:00
Peter Rajnoha
bfde83eb34 config: add override_config_tree_from_profile fn to add the profile to a configuration cascade
When placing the profile in a configuration cascade, this sequence is
used exactly:

CONFIG_STRING -> CONFIG_PROFILE -> CONFIG_FILE/MERGED_FILES

So if the profile is used, it overloads the lvm.conf (and any
existing tag configs). However, if "--config" is used to define
a custom configuration on command line, this overloads even the
profile config!
2013-07-02 15:19:08 +02:00
Peter Rajnoha
ebc236d085 config: add support for loading profiles
This patch adds --profile arg to lvm cmds and adds config/profile_dir
configuration setting to select the directory where profiles are stored
By default it's /etc/lvm/profile.

The profiles are added by using new "add_profile" fn and then loaded
using the "load_profile" fn. All profiles are stored in a cmd context
within the new "struct profile_params":

struct profile_params {
  const char *dir;
  struct profile *global_profile;
  struct dm_list profiles_to_load;
  struct dm_list profiles;
};

...where "dir" is the directory with profiles, "global_profile" is
the profile that is set globally via the --profile arg (IOW, not
set per VG/LV basis based on metadata record) and the "profiles"
is the list with loaded profiles.
2013-07-02 15:19:08 +02:00
Peter Rajnoha
da3ea66a96 config: add config_source_t type to identify configuration source
A helper type that helps with identification of the configuration source
which makes handling the configuration cascade a bit easier, mainly
removing and adding configuration trees to cascade dynamically.

Currently, the possible types are:

  CONFIG_UNDEFINED - configuration is not defined yet (not initialized)
  CONFIG_FILE - one file configuration
  CONFIG_MERGED_FILES - configuration that is a result of merging more files into one
  CONFIG_STRING - configuration string typed on cmd line directly
  CONFIG_PROFILE - profile configuration (the new type of configuration, patches will follow...)

Also, generalize existing "remove_overridden_config_tree" to work with
configuration type identification in a cascade. Before, it was just
the CONFIG_STRING we used. Now, we need some more to add in a
cascade (like the CONFIG_PROFILE). So, we have:

  struct dm_config_tree *remove_config_tree_by_source(struct cmd_context *cmd, config_source_t source);
  config_source_t config_get_source_type(struct dm_config_tree *cft);

... for removing the tree by its source type from the cascade and
simply getting the source type.
2013-07-02 15:19:08 +02:00
Zdenek Kabelac
bdf0594aa8 cleanup: swap initial assignment
Easier to read code.
2013-07-01 23:12:36 +02:00
Zdenek Kabelac
47419d21ac cleanup: stack usage
Shortening code with macros return_0, return_NULL.
Add some missing stack prints in error paths.
2013-07-01 23:11:14 +02:00
Zdenek Kabelac
b90450b8a0 cleanup: introduce return_ECMD_FAILED macro
Use shortening macro for common code sequence
stack;
return ECMD_FAILED;
2013-07-01 23:10:33 +02:00
Zdenek Kabelac
4d9ed81075 vg/lvchange: drop local archived handling
Drop code handling archived flag now handled implicitely.
2013-07-01 23:10:33 +02:00
Zdenek Kabelac
a4d6f7939c thin: check for creation of pool 2013-06-25 13:47:39 +02:00
Zdenek Kabelac
d46588c2d7 cleanup: add dot to lvchange message 2013-06-25 13:47:39 +02:00
Zdenek Kabelac
19b064a309 cleanup: move mirror check code closer
Group a bit more code related to mirrors.
2013-06-25 13:47:39 +02:00
Zdenek Kabelac
09dc590b67 cleanup: code swap
Use easier to read positive query and indent line.
2013-06-25 13:47:39 +02:00
Jonathan Brassow
88288ab433 cleanup: Remove message used for development
Failed to clean out all messages used during development.
2013-06-24 06:16:39 -05:00
Jonathan Brassow
a6d13308ec RAID/MIRROR: Honor mirror_segtype_default when upconverting linear LVs
If the user would upconvert a linear LV to a mirror without specifying
the segment type ("--type mirror" vs "--type raid1"), the "mirror"
segment type would be chosen without consulting the 'default_mirror_segtype'
setting in lvm.conf.  This is now used as the basis for determining
which should be used if left unspecified.
2013-06-19 17:50:10 -05:00
Zdenek Kabelac
4d2aa6a7aa cleanup: use parsed yes_no_arg
Do not parse yes_no_arg inside tools code and use already
available result as uint.
2013-06-18 22:13:42 +02:00
Zdenek Kabelac
450ac7be42 cleanup: move string in the use-place 2013-06-16 00:07:33 +02:00
Zdenek Kabelac
036d4f2982 cleanup: tab 2013-06-13 14:51:02 +02:00
Zdenek Kabelac
fe22089edf thin: vgsplit support for thins
Support vgsplit for VGs with thin pools and thin volumes.
In case the thin data and thin metadata volumes are moved to a new VG,
move there also all related thin volumes and check that external origins
are also present in this new VG.
2013-06-13 14:51:00 +02:00
Zdenek Kabelac
bb70b38021 lvresize: improve poolmetadatasize
Fix the usecase when only PV list is specified.
With --poolmetadatasize PV list is used for metadata extents.
Without --poolmetadatasize PV list is used for 100% extension of LV.
Handle the case, when nothing could be resized (i.e. in dmeventd)
2013-06-11 19:46:42 +02:00
Zdenek Kabelac
6ff8b6d754 lvresize: fix pvh handling
Fix bug in previous patch - if only PVs are specified -
it's like if user would have specified size.
2013-06-11 14:55:32 +02:00
Zdenek Kabelac
c888c925b8 thin: enable resize for thin pool metadata LV
Support 'clasic' way of resizing of metadata LV.
Normally we disallow to work with internal 'invisible' devices.
But in this case we can make an exception and if user has some
special needs how to extend thin pool metadata LV - support it.

After resize of metadata LV, the pool will be suspended and resumed,
to be notified of this change.
2013-06-11 14:07:51 +02:00
Zdenek Kabelac
87aca628d6 thin: lvresize supports pool metadata resize
Add support for lvresize of thin pool metadata device.

lvresize --poolmetadatasize +20   vgname/thinpool_lv

or

lvresize -L +20 vgname/thinpool_lv_tmeta

Where the second one allows all the args for resize (striping...)
and the first option resizes accoding to the last metadata lv segment.
2013-06-11 14:05:20 +02:00
Zdenek Kabelac
272f5ae208 snapshots: check for active state
Fix testing if the snapshot could be resized and use lv_is_active()
to get correct answer in cluster.
2013-06-11 13:57:18 +02:00
Zdenek Kabelac
1cdb6ca2b2 cleanup: skip test if already tested for SIGN_PLUS 2013-06-11 13:55:26 +02:00
Zdenek Kabelac
d0def236d6 cleanup: move lv assignment
Use shorter  lv->.
2013-06-11 13:55:26 +02:00
Petr Rockai
f65dd341a5 locking: Make it possible to pass down an LV to activation code.
Previously, we have relied on UUIDs alone, and on lvmcache to make getting a
"new copy" of VG metadata fast. If the code which triggers the activation has
the correct VG metadata at hand (the version which is currently on disk), it can
now hand it to the activation code directly.
2013-06-10 17:26:38 +02:00
Zdenek Kabelac
e5baaf4ac9 lvcreate: update thin validation
Merge duplicate code that was validating lvcreate args
for creation of thin and snapshot.

Keep most of thin checks in _check_thin_parameters().

Update couple error messages.
2013-05-31 21:40:07 +02:00
Zdenek Kabelac
e01fbd9d8d lvcreate: update snapshot test
With last commit, there has been missing test for valid setting
of extents - there is no need to test max size when creating
thin snapshots.
2013-05-31 21:30:44 +02:00
Jonathan Brassow
562c678ee2 DM RAID: Add ability to throttle sync operations for RAID LVs.
This patch adds the ability to set the minimum and maximum I/O rate for
sync operations in RAID LVs.  The options are available for 'lvcreate' and
'lvchange' and are as follows:
  --minrecoveryrate <Rate> [bBsSkKmMgG]
  --maxrecoveryrate <Rate> [bBsSkKmMgG]
The rate is specified in size/sec/device.  If a suffix is not given,
kiB/sec/device is assumed.  Setting the rate to 0 removes the preference.
2013-05-31 11:25:52 -05:00
Zdenek Kabelac
6f9366696c cleanup: fix tabs 2013-05-30 17:56:41 +02:00
Zdenek Kabelac
b08c346489 lvresize: drop monitoring of 100% covered origin 2013-05-30 17:35:23 +02:00
Zdenek Kabelac
3ced1bf694 lvresize: check for max snapshot size
As for lvcreate, lvresize also doesn't need to grow bigger then needed.
2013-05-30 17:35:23 +02:00
Zdenek Kabelac
bd3ece0128 lvcreate: reduce too large cow
Detect maximum usable size of snapshot COW device,
and do not waste more space for such LV then needed.
2013-05-30 17:35:14 +02:00
Zdenek Kabelac
56779c32c5 snapshot: fix resize of 100% full cow
When the COW area is using all the available space (100%) it can be still
a valid snapshot which may need a resize. So support it.
2013-05-30 17:26:20 +02:00
Zdenek Kabelac
99f0483580 args: do not accept >=16EiB sizes
Instead of seeing wierd overflows inside the lvm code,
giving false error messages, kill the user experiment in the begining.

Who needs to use more then 16EiB with lvm2 and 64bit anyway...
2013-05-30 17:23:51 +02:00
Peter Rajnoha
732859d21f refactor: rename embedding area -> bootloader area 2013-05-28 12:37:22 +02:00