IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If a command begins repopulating the lvmetad cache,
and fails part way through, it should set the disabled
state in lvmetad so other commands don't use bad data.
If a subsequent scan succeeds, the disabled state is
cleared.
When duplicate PVs are detected, set the disabled
flag so that commands will disable use of lvmetad.
This duplicate detection is done by lvmetad itself
when it's told about a single new PV with a PVID
that matches an existing PV on another device.
(This is different from the case where the command
is scanning all devices and detects the duplicate.)
Remove the "altdev" logic that attempted to keep
track of multiple devices for a single PV. It
is no longer used since lvmetad is disabled in
this case.
A global flag in lvmetad indicates it has been disabled.
Other flags indicate the reason it was disabled.
These flags can be queried using get_global_info.
The lvmetactl debugging utility can set and clear the
disabled flag in lvmetad. Nothing else sets the
disabled flag yet.
Commands will check these flags after connecting to
lvmetad. If the disabled flag is set, the command
will not use the lvmetad cache, but revert to disk
scanning.
To test this feature:
$ lvmetactl get_global_info
response = "OK"
global_invalid = 0
global_disable = 0
disable_reason = "none"
token = "filter:3041577944"
$ vgs
(should report VGs from lvmetad)
$ lvmetactl set_global_disable 1
$ lvmetactl get_global_info
response = "OK"
global_invalid = 0
global_disable = 1
disable_reason = "DIRECT"
token = "filter:3041577944"
$ vgs
WARNING: Not using lvmetad because the disable flag was set directly.
(should report VGs without contacting lvmetad)
$ lvmetactl set_global_disable 0
$ vgs
(should report VGs from lvmetad)
Move checking the lvmetad state, and the possible rescan,
out of lvmetad_send() to the start of the command.
Previously, the token mismatch and rescan would occur
within lvmetad_send() for some other request. Now,
the token mismatch is detected earlier, so the
rescan can be done before the main command is in
progress. Rescanning deep within the processing of
another command will disturb the lvmcache state of
that other command.
A rescan already exists at the start of the command
for the case where foreign VGs are going to be read.
This same rescan is now also performed when there is
an lvmetad token mismatch (from a changed global_filter).
The commands pvscan/vgscan/lvscan/vgimport are excluded
from this preemptive checking/rescanning for lvmetad
because they want to do rescanning themselves explicitly.
If rescanning devices fails, then lvmetad has not been
correctly repopulated and should not be used, so make
the command revert to not using lvmetad.
To help out with debug, when an exception is thrown in the dbus service we
will dump all the information we have on the last 16 commands that were
executed along with the stack strace.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
While running on F24 a number of warnings were being emitted from using the
deprecated GObject instead of GLib. Tested on python 3.4 and 3.5.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Python 3.5 in F24 was throwing the following exception:
Traceback (most recent call last):
File "/usr/lib/python3.5/site-packages/lvmdbusd/main.py", line 73, in process_request
req.run_cmd()
File "/usr/lib/python3.5/site-packages/lvmdbusd/request.py", line 73, in run_cmd
self.register_error(-1, st)
File "/usr/lib/python3.5/site-packages/lvmdbusd/request.py", line 123, in register_error
self._reg_ending(None, error_rc, error)
File "/usr/lib/python3.5/site-packages/lvmdbusd/request.py", line 115, in _reg_ending
self.cb_error(self._rc_error)
File "/usr/lib64/python3.5/site-packages/dbus/service.py", line 669, in <lambda>
keywords[error_callback] = lambda exception: _method_reply_error(connection, message, exception)
File "/usr/lib64/python3.5/site-packages/dbus/service.py", line 293, in _method_reply_error
exception))
File "/usr/lib64/python3.5/traceback.py", line 136, in format_exception_only
return list(TracebackException(etype, value, None).format_exception_only())
File "/usr/lib64/python3.5/traceback.py", line 442, in __init__
if (exc_value and exc_value.__cause__ is not None
AttributeError: 'str' object has no attribute '__cause__'
This was caused because we were calling the dbus error callback with a
string instead of an actual exception. On python 3.4 this was apparently
OK, but not with 3.5. Corrected to pass the exception to error callback.
Change tested on both python 3.4 and 3.5.
Reported-by: Vratislav Podzimek <vpodzime@redhat.com>
Signed-off-by: Tony Asleson <tasleson@redhat.com>
When we use udev or have lvm call back into the dbus service when a
change occurs, even if that change originated from the dbus service
we end up refreshing the state of the system twice which is not
needed or wanted. This change handles this case by removing any
pending refreshes in the worker queue if the state of the system
was just updated.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Use #define instead, since we do not require actually buffer needs
to exists to eliminated new gcc6 warning:
clvm.h:53:19: warning: ‘CLVMD_SOCKNAME’ defined but not used
[-Wunused-const-variable]
export LVMDBUSD_SESSION=True to run on the session bus instead
of the system bus so that we can run the unit test without
installing the dbus conf file.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
It appears that the output of lvconvert --merge can vary some. The code
was blowing up as it was trying to parse a line of stdout to retrieve the
% complete, but the line did not have the needed format and an execption
was thrown. The uncaught exception caused the background thread to exit
without updating the job object, which caused the client to hang forever
waiting. Added a default exception handler to prevent unhandled execptions
causing hangs and removed the parameter skip_first_line as it's no longer
needed. The code checks to see if the line can be parsed before doing so.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
After the lockspace has been successfully removed,
invalidate the name field in the lockspace struct.
The struct remains on the list of lockspaces until
the struct can be freed later. Until the struct is
freed, its name will prevent another new lockspace
from being created with the same name.
Since commit 2fc126b00d, the library
code requires udev to be initialised for device scanning and
clvmd can fail to find VGs if devices/external_device_info_source
is set to "udev".
Make the lvb validation rules for convert match
those for unlock (even though it would be very
unlikely or impossible for convert to deal with
zero lvb.)
Have commands send lvmlockd the update message
in vg_write instead of vg_commit, so that it's
not done while LVs are suspended. If the vg_write
is not committed, and the seqno sent to lvmlockd
is not used, then lvmlockd can detect this when
the next update uses the same seqno.
Use process_each_vg() to lock and read the old VG,
and then call the main vgrename code.
When real VG names are used (not a UUID in place of the
old name), the command still pre-locks the new name
(when strcmp wants it locked first), before calling
process_each_vg on the old name.
In the case where the old name is replaced with a UUID,
process_each_vg now translates that UUID into the real
VG name, which it locks and reads. In this case, we
cannot do pre-locking to maintain lock ordering because
the old name is unknown. So, in this case the strcmp
based lock ordering is suppressed and the old name is
always locked first. This opens a remote chance for
lock ordering conflict between racing vgrenames between
two names where one or both commands use the UUID.
If an existing fifo has the wrong attributes it cannot be trusted
so we must unlink it and recreate it correctly.
(Replaces 2c8d6f5c90: if the other end of
the fifo already got opened while its mode was insecure, delaying the
chmod isn't going to make any difference!)
Reinstate and extend checks removed by e1b111b02a.
The code has always assumed that only root has access to the directory
containing the fifos and that they are under the complete control of
dmeventd code. If anything is found not to be as expected, then open()
should certainly not be attempted!
In lookup, return a count of entries with the
same key rather than the value from a second
entry with the same key.
Using some slightly different names.
