IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When setting up a toolcontext, the lib init function
was detecting an error when there was none, and then
it was returning an incompletely initialized cmd struct
instead of NULL. The effect was that the lib would try
to use the uninitialized cmd struct and segfault.
This would happen if a non-fatal error occurred during
cmd setup, e.g. user permission failed on lvmetad socket,
causing cmd to fall back to scanning and not use lvmetad.
The only real error condition is when create_toolcontext
returns NULL. If cmd is returned, the lib can use it.
If lvmetad is running, and a command opts to not use it
(--config global/use_lvmetad=0), and the command changes
metadata, then the metadata change is not visible to
lvmetad. Subsequent commands using lvmetad to change
metadata may cause corruption based on the invalid
lvmetad state.
Eventually we can set the disabled state in lvmetad
to prevent this problem, but for now print a warning
about the possibility.
When command is not using lvmetad because
use_lvmetad=0 in the config, but the lvmetad
pidfile exists, print a warning (previously
this checked for the socket existing instead
of the pidfile existing.)
The lvmetad connection is created within the
init_connections() path during command startup,
rather than via the old lvmetad_active() check.
The old lvmetad_active() checks are replaced
with lvmetad_used() which is a simple check that
tests if the command is using/connected to lvmetad.
The old lvmetad_set_active(cmd, 0) calls, which
stopped the command from using lvmetad (to revert to
disk scanning), are replaced with lvmetad_make_unused(cmd).
When a command modifies a PV or VG, or changes the
activation state of an LV, it will send a dbus
notification when the command is finished. This
can be enabled/disabled with a config setting.
'verbose' was marked as a boolean option while it
takes integer args - so it has limited usage to 0 or 1,
but we supported 0-4 at least.
Fix it by switching to corrent int type.
(Hopefully noone was trying to use this variable as true/yes/false/no
way - as the would be unsupported/undocumented).
The regex filter (controlled by devices/filter lvm.conf setting) was
evaluated as the very last filter. However, this is not optimal when
it comes to restricting disk access - users define devices/filter
as well as devices/global_filter to avoid this.
The devices/global_filter is already positioned at the beginning of the
filter chain. We need to do the same for devices/filter.
Filter chains before this patch:
A: when lvmetad is not used:
persistent_filter -> sysfs_filter -> global_regex_filter ->
type_filter -> usable->filter -> mpath_component_filter ->
partition_filter -> md_component_filter -> fw_raid_filter ->
regex_filter
B: when lvmetad is used:
B1: to update lvmetad:
sysfs_filter -> global_regex_filter -> type_filter ->
usable_filter -> mpath_component_filter -> partition_filter ->
md_component_filter -> fw_raid_filter
B2: to retrieve info from lvmetad:
persistent_filter -> usable_filter -> regex_filter
From the chain list above we can see that particularly in case when
lvmetad is not used, the regex filter is the very last one that is
processed. If lvmetad is used, it doesn't matter much as there's
the global_regex_filter which is used instead when updating lvmetad
and when retrieving info from lvmetad, putting regex_filter in front
of usable_filter wouldn't change much since usabled_filter is not
reading disks directly.
This patch puts the regex filter to the front even in case lvmetad
is not used, hence reinstating the state as it was before commit
a7be3b12df (which moved the regex_filter
position in the chain). Still, the arguments for the commit
a7be3b12df still apply and they're
still satisfied since component filters (MD, mpath...) are evaluated
first just before updating lvmetad.
So with this patch, we end up with:
A: when lvmetad is not used:
persistent_filter -> sysfs_filter -> global_regex_filter ->
regex_filter -> type_filter -> usable->filter ->
mpath_component_filter -> partition_filter ->
md_component_filter -> fw_raid_filter
B: when lvmetad is used:
B1: to update lvmetad:
sysfs_filter -> global_regex_filter -> type_filter ->
usable_filter -> mpath_component_filter -> partition_filter ->
md_component_filter -> fw_raid_filter
B2: to retrieve info from lvmetad:
persistent_filter -> regex_filter -> usable_filter
This way, specifying the regex_filter in non-lvmetad case causes
the devices to be filtered based on regex first before processing
any other filters which can access disks (like md_component_filter).
This patch also streamlines the code for better readability.
Use refresh_filters instead of destroy_filters and init_filters
in refresh_toolcontext fn which deals with cmd->initialized.filters
correctly on refresh.
Make it possible to decide whether we want to initialize connections and
filters together with toolcontext creation.
Add "filters" and "connections" fields to struct
cmd_context_initialized_parts and set these in cmd_context.initialized
instance accordingly.
(For now, all create_toolcontext calls do initialize connections and
filters, we'll change that in subsequent patch appropriately.)
Move original lvmetad and lvmpolld initialization code from
_process_config fn to their own functions _init_lvmetad and
_init_lvmpolld (both covered with single _init_connections fn).
Add struct cmd_context_initialized_parts to wrap up information
about which cmd context pieces are initialized and add variable
of this struct type into struct cmd_context.
Also, move existing "config_initialized" variable that was directly
part of cmd_context into the new cmd_context.initialized wrapper.
We'll be adding more items into the struct cmd_context_initialized_parts
with subsequent patches...
Use find_config_tree_array for all config arrays. Also, add
INTERNAL_ERROR in case there should have been at least default
value defined for a setting but it was not returned for some
reason (either config_settings.h misconfiguration or other config
tree error printed by functions called by find_config_tree_array).
Before, we used general find_config_tree_node function to retrieve
array values. This had a downside where if the node was not found,
we had to insert default values directly in-situ after the
find_config_tree_node call. This way, we had two copies of default
values - one in config_settings.h and the other one directly in the
code where we found out that find_config_tree_node returned NULL and
hence we needed to fall back to defaults.
With separate find_config_tree_array used for array config values,
we keep all the defaults centrally in config_settings.h because
the new find_config_tree_array automatically returns these defaults
if it can't find any value set in the configuration.
This patch just makes the behaviour exactly the same for arrays as
for any other non-array type where we call find_config_tree_<type>
already, hence making the internal interface for handling array
values consistent with the rest of the config types.
Make it possible to define format for time that is displayed.
The way the format is defined is equal to the way that is used
for strftime function, although not all formatting options as
used in strftime are available for LVM2 - the set is restricted
(e.g. we do not allow newline to be printed). The lvm.conf
comments contain the whole list that LVM2 accepts for time format
together with brief description (copied from strftime man page).
For example:
(defaults used - the format is the same as used before this patch)
$ lvs -o+time vg/lvol0 vg/lvol1
LV VG Attr LSize Time
lvol0 vg -wi-a----- 4.00m 2015-06-25 16:18:34 +0200
lvol1 vg -wi-a----- 4.00m 2015-06-29 09:17:11 +0200
(using 'time_format = "@%s"' in lvm.conf - number of seconds
since the Epoch)
$ lvs -o+time vg/lvol0 vg/lvol1
LV VG Attr LSize Time
lvol0 vg -wi-a----- 4.00m @1435241914
lvol1 vg -wi-a----- 4.00m @1435562231
In log messages refer to it as system ID (not System ID).
Do not put quotes around the system_id string when printing.
On the command line use systemid.
In code, metadata, and config files use system_id.
In lvmsystemid refer to the concept/entity as system_id.
Move the lvm1 sys ID into vg->lvm1_system_id and reenable the #if 0
LVM1 code. Still display the new-style system ID in the same
reporting field, though, as only one can be set.
Add a format feature flag FMT_SYSTEM_ON_PVS for LVM1 and disallow
access to LVM1 VGs if a new-style system ID has been set.
Treat the new vg->system_id as const.
Allow cmd->unknown_system_id to be cleared during toolcontext
refresh.
Set a default value of "none" for global/system_id_source.
Allow local/system_id to be empty so it's not impossible for
a later config file to remove it.
In a file containing a system ID:
Any whitespace at the start of a line is ignored;
Blank lines are ignored;
Any characters after a # are ignored along with the #.
The system ID is obtained by processing the first line with
non-ignored characters.
If further lines with non-ignored characters follow, a warning is
issued.
Add WARNING messages if there are problems setting the requested
system ID.
Ban "localhost" as a prefix regardless of the system_id_source.
Use cmd->hostname instead of calling uname again.
Make system_id_source values case-insensitive (as with new settings like
log_debug_classes) and also accept machine-id to match the filename.
Require system ID to begin with an alphanumeric character.
Rename fn to make clear it's only validation for systemid
and always terminate result rather than imposing this on the caller.
In 2.02.99, _init_tags() inadvertently began to ignore the
dm_config_tree struct passed to it. "tags" sections are not
merged together, so the "tags" section in the main config file was
being processed repeatedly and other "tags" sections were ignored.
Just like MD filtering that detects components of software RAID (md),
add detection for firmware RAID.
We're not adding any native code to detect this - there are lots of
firmware RAIDs out there which is just out of LVM scope. However,
with current changes with which we're able to get device info from
external sources (e.g. external_device_info_source="udev"), we can
do this easily if the external device status source has this kind
of information - which is the case of "udev" source where the results
of blkid scans are stored.
This detection should cover all firmware RAIDs that blkid can detect and
which are identified as:
ID_FS_TYPE = {adaptec,ddf,hpt45x,hpt37x,isw,jmicron,lsi_mega,nvidia,promise_fasttrack,silicon_medley,via}_raid_member
Composite filter is a filter that can put several filters in one set.
This patch adds a switch when creating the composite filter which will
enable or disable external device info handles for all the filters
the composite filter encompasses.
We want to use this external device info for majority of the filters
which are in the "lvmetad filter chain" (or the respective part if
we're not using lvmetad).
Following patches will use the enabled external device handle in
concrete filters from the composite filter...
There are actually three filter chains if lvmetad is used:
- cmd->lvmetad_filter used when when scanning devices for lvmetad
- cmd->filter used when processing lvmetad responses
- cmd->full_fiilter (which is just cmd->lvmetad_filter + cmd->filter chained together) used
for remaining situations
This patch adds the third one - "cmd->full_filter" - currently this is
used if device processing does not fall into any of the groups before,
for example, devices which does not have the PV label yet and we're just
creating a new one or we're processing the devices where the list of the
devices (PVs) is not returned by lvmetad initially.
Currently, the cmd->full_filter is used exactly in these functions:
- lvmcache_label_scan
- _pvcreate_check
- pvcreate_vol
- lvmdiskscan
- pvscan
- _process_each_label
If lvmetad is used, then simply cmd->full_filter == cmd->filter because
cmd->lvmetad_filter is NULL in this case.
We need to use proper filter chain when we disable lvmetad use
explicitly in the code by calling lvmetad_set_active(0) while
overriding existing configuration. We need to reinitialize filters
in this case so proper filter chain is used. The same applies
for the other way round - when we enable lvmetad use explicitly in
the code (though this is not yet used).
With this change, the filter chains used look like this now:
A) When *lvmetad is not used*:
- persistent filter -> regex filter -> sysfs filter ->
global regex filter -> type filter ->
usable device filter(FILTER_MODE_NO_LVMETAD) ->
mpath component filter -> partitioned filter ->
md component filter
B) When *lvmetad is used* (two separate filter chains):
- the lvmetad filter chain used when scanning devs for lvmetad update:
sysfs filter -> global regex filter -> type filter ->
usable device filter(FILTER_MODE_PRE_LVMETAD) ->
mpath component filter -> partitioned filter ->
md component filter
- the filter chain used for lvmetad responses:
persistent filter -> usable device filter(FILTER_MODE_POST_LVMETAD) ->
regex filter
