IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Currently the code creates the log separately after allocating space for
the data and as no data allocation is needed this second time,
total_extents ends up holding zero so use new_extents directly instead.
Now with correctly functioning dmeventd enable usage of
low_water_mark for faster reaction on pool's threshold.
When user select e.g. 80% as a threshold value,
dmeventd doesn't need to wait 10 seconds till monitoring
timer expires, but nearly instantly resizes thin-pool
to fit bellow threshold.
The former patch(dab3ebce4c) is a little bit strict. For example, it is
OK to create PV on unpartitioned DASD devices with LDL formatted. So
after lvm version containing the patch, LVs created on those devices
could not be found.
Signed-off-by: Lidong Zhong <lzhong@suse.com>
Recognize the target only 'extends' and do not enforce
'flush' in this case. Only the size reduction
still requires flush (so disables usage of no_flush flag).
If some other targets do require flush before suspend,
they have to explicitly ask for it.
While the activation code tries to evaluate which target
really needs flush with suspend and which may go without flush,
it has stayed effectively disabled by original commit:
33f732c5e9 since here
it only allows to pass non-pvmoving 'mirrors'.
So remove check for mirror LV type and only disable
no_flush for 'pvmove'..
TODO: Looking into history - it also seemed like raid target
would have always required flushing but it's been later
removed without clean explanation.
If some more targets really do need 'no_flush' it should
been handle at their 'level' - since we now stack multiple
targets over itself.
Use single code to evaluate if the percentage value has
crossed threshold.
Recalculate amount value to always fit bellow
threshold so there are not need any extra reiterations
to reach this state in case policy amount is too small.
Since plugin's percentage compare has been fixed,
it's now revealed wrong compare here.
The logic for threshold is - to allow to go as high
as given value e.g. 80% - so if pool is exactlu 80%
full it's still allowed to use it (dmeventd will not
resize it).
When lvmetad is used and lvmcache update function (lvmcache_update_vgname_and_id)
was called to update existing lvmcache records, a condition was met
which made to retun from the update function immediately, effectively
making it NOOP.
It seems there's no reason for such condition and lvmcache should be
update appropriately even when lvmetad used as lvmcache may be reused,
most notably in lvm shell.
It's possible this is a remnant of the lvmetad development code which
didn't get removed for some reason and the bug didn't get spotted
because lvm shell is not used often (the condition dates back to 2012
or so).
Example, lvmetad and lvm shell used:
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/sda vg lvm2 a-- 124.00m 124.00m
Before this patch:
==================
lvm> vgremove vg
Volume group "vg" successfully removed
lvm> pvs
With this patch applied:
========================
lvm> vgremove vg
Volume group "vg" successfully removed
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/sda lvm2 --- 128.00m 128.00m
The lvmcache info might be resued, most notably in lvm shell.
We need to be sure that even lvmcache_info marked as invalid
is removed from the lvmcache so it does not confuse any subsequent
code/commands executed later on.
Problematic example with the lvm shell:
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/sda lvm2 --- 128.00m 128.00m
Before this patch (/dev/sda still displayed in a way):
======================================================
lvm> pvremove /dev/sda
Labels on physical volume "/dev/sda" successfully wiped
(without lvmetad)
lvm> pvs
No physical volume label read from /dev/sda
(with lvmetad)
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/sda lvm2 --- 128.00m 128.00m
With this patch applied:
========================
lvm> pvremove /dev/sda
Labels on physical volume "/dev/sda" successfully wiped
(without lvmetad)
lvm> pvs
(with lvmetad)
lvm> pvs
CONVERTING status flag is a tricky one. It's not set when converting
a non-mirror LV type to the mirror type, i.e.: linear -> two leg mirror.
Also the conversion itself is instant and doesn't require to be polled.
When mirror reaches sync state there's no final update on VG metadata
for lvmpolld to be made thereby report_progress in fact doesn't report
percentage of mirror being converted but percentage of mirror
being in sync. Perhaps we should reword the lvconvert output here.
On the other hand CONVERTING is set while we upconvert the mirror
from i.e. two leg mirror to four leg mirror. In such case the operation
is required to be polled so that lvmpolld can cleanup temporary
conversion log when the conversion is over.
Ignore CONVERTING lv_type for the moment and match LVs only by uuids
during 'mirror conversion'/'waiting for a sync to finish'.
The new report/compact_output_cols setting has exactly the same effect
as report/compact_output setting. The difference is that with the new
setting it's possible to define which cols should be compacted exactly
in contrast to all cols in case of report/compact_output.
In case both compact_output and compact_output_cols is enabled/set,
the compact_output prevails.
For example:
$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=0
compact_output_cols=""
$ lvs vg
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lvol0 vg -wi-a----- 4.00m
---
$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=0
compact_output_cols="data_percent,metadata_percent,pool_lv,move_pv,origin"
$ lvs vg
LV VG Attr LSize Log Cpy%Sync Convert
lvol0 vg -wi-a----- 4.00m
---
$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=1
compact_output_cols="data_percent,metadata_percent,pool_lv,move_pv,origin"
$ lvs vg
LV VG Attr LSize
lvol0 vg -wi-a----- 4.00m
This reverts commit 1b1c01a27b.
This caused messages to get dropped instead of logged into the log file.
(The log file and log function are independent at the moment.)
Some signatures are spread around the disk in several copies, mainly for
backup. Make libblkid to detect these extra copies - there was missing
"blkid_probe_step_back" fn call after successful wipe of previous signature
copy.
An example with FAT table which has copies:
$ mkfs.vfat /dev/sda1
Before this patch:
$ pvcreate /dev/sda1
WARNING: vfat signature detected on /dev/sda1 at offset 54. Wipe it? [y/n]: y
Wiping vfat signature on /dev/sda1.
Physical volume "/dev/sda1" successfully created
With this patch applied:
$ pvcreate /dev/sda1
WARNING: vfat signature detected on /dev/sda1 at offset 54. Wipe it? [y/n]: y
Wiping vfat signature on /dev/sda1.
WARNING: vfat signature detected on /dev/sda1 at offset 0. Wipe it? [y/n]: y
Wiping vfat signature on /dev/sda1.
WARNING: vfat signature detected on /dev/sda1 at offset 510. Wipe it? [y/n]: y
Wiping vfat signature on /dev/sda1.
Physical volume "/dev/sda1" successfully created
$ vgcreate vgA /dev/sda
Volume group "vgA" successfully created
$ dd if=/dev/sda of=/dev/sdb bs=1M
$ dd if=/dev/sda of=/dev/sdc bs=1M
(the new VG name is prefix of existing VG name)
$ vgimportclone -n vg /dev/sdb
(the new VG name is suffix of existing VG name)
$ vgimportclone -n gA /dev/sdc
Before this patch:
------------------
(we end up with "vg1" and "gA1" names with the "1" suffix which is not needed)
$ vgs -o vg_name
VG
gA1
vg1
vgA
With this patch applied:
------------------------
(we end up with "vg" and "gA" names as they're unique already and no extra suffix is added)
$ # vgs -o vg_name
VG
gA
vg
vgA
Of course, if the name supplied is not unique, the number is added correctly:
$ dd if=/dev/sda of=/dev/sdb bs=1M
$ vgimportclone -n vgA /dev/sdb
$ vgs -o vg_name
VG
vgA
vgA1
We can replace the expressions with awk/grep/cut/tr with --select now and
more suitable reporting options and modes. Also, we don't need to check
the temporary lvm.conf generated within vgimportclone script since we're
generating it ourselves now using lvmconfig, not using sed anymore like
it was before (so we can be pretty sure it's correct - we use lvmconfig
now even for generating the lvm.conf itself).
We already have pv_count to report number of PVs that a VG has based
on metadata.
This patch exposes the information about how many of these PVs are
missing which is also useful information for a VG. Wwe could count
the sum of pv_missing reporting fields for each PV in the VG before,
but the new field is practical when reporting VG as a whole and there's
no need to process each PV from VG alone.
Before this patch:
$ lvs -a -o name,layout,role test/lvmlock
LV Layout Role
[lvmlock] linear public
With this patch applied:
$ lvs -a -o name,layout,role test/lvmlock
LV Layout Role
[lvmlock] linear private,lockd,sanlock
Add metadata_devices and seg_metadata_le_ranges report fields.
Currently only defined for raid, but should probably be extended
to all other segment types that don't report all their device
usage in the 'devices' field.
We want most of our units to be started before any local/remote mount
points are mounted - we used {local,remote}-fs.target for this purpose
before, but it was not 100% correct as there's even {local,remote}-fs-pre.target
special systemd unit reserved for this exact purpose.
See also man 7 systemd.special and "local-fs-pre.target"/"remote-fs-pre.target"
description.
When using lvm shell, some structures which are cached in memory may be
reused. This happens for the struct label (a part of lvmcache_info
structure) when lvmetad is used in which case the PV scan is not
done that would normally overwrite these label structures in memory
and making them up-to-date.
This is all consequence of the fact that struct lvmcache_info and
struct label are not always assigned in the same part of the code.
For example, if lvmetad *is not* used, parts of the struct label are
reassigned in label_read fn while struct lvmcache_info is created
elsewhere. No part of the code reused struct label (and its "dev"
field) before calling label_read fn. That's why the real bug is
hidden when using lvm shell without lvmetad.
However, with lvmetad and lvm shell, the situation is a bit different.
The label_read fn is not called if lvmetad *is* used, hence the
struct label may have ended up not initialized properly.
There was missing assignment for the dev field in struct label
in _text_pv_write fn which caused this problem to appear in
lvm shell with lvmetad, for example:
Before this patch:
lvm> pvcreate /dev/sda
Physical volume "/dev/sda" successfully created
lvm> pvs /dev/sda
PV VG Fmt Attr PSize PFree
unknown device lvm2 --- 128.00m 128.00m
With this patch applied:
lvm> pvcreate /dev/sda
Physical volume "/dev/sda" successfully created
lvm> pvs /dev/sda
PV VG Fmt Attr PSize PFree
/dev/sda lvm2 --- 128.00m 128.00m
Also, this problem had not appeared before changes introduced
by commits e1a63905d1 through
3a6f91d713 which, among other
things, added proper label field type reporting. Before, label
reporting was the same as using struct physical_volume which
has its own dev field assigned and so this problem was not exposed.
Commit 00b36ef06a had a typo
and missed '{' for shell variable, thus command used slightly
different 'tmp' dir name for cache dir (with extra '}').
Such change was unnoticed until a recent fix in persistent
filter, lvm2 missed to update cache file when --config
was specified.
The result was, /tmp dir was accumulating snap.XXXXX} dirs when
running vgimportclose script.
Since we may want to swap names when LVs are complex types, we cannot
avoid doing full renames on both LV stacks.
Temporarily use 'pvmove_tmeta' as unused name to prevent validation troubles.
