IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Native disk scanning is now both reduced and
async/parallel, which makes it comparable in
performance (and often faster) when compared
to lvm using lvmetad.
Autoactivation now uses local temp files to record
online PVs, and no longer requires lvmetad.
There should be no apparent command-level change
in behavior.
There are likely more bits of code that can be removed,
e.g. lvm1/pool-specific bits of code that were identified
using FMT flags.
The vgconvert command can likely be reduced further.
The lvm1-specific config settings should probably have
some other fields set for proper deprecation.
Avoid adding -g more then once for debug builds.
Avoid enabling DEBUG_MEM when we build multithreaded tools.
Link executables with -fPIE -pie and --export-dynamic LDFLAGS
Introduce PROGS_FLAGS to add option to pass flags for external libs.
Link lvm2 internally library only when really used.
Link DAEMON_LIBS with daemons.
Pass VALGRIND_CFLAGS internally
Set shell failure mode on couple places.
When a command modifies a PV or VG, or changes the
activation state of an LV, it will send a dbus
notification when the command is finished. This
can be enabled/disabled with a config setting.
The former patch(dab3ebce4c) is a little bit strict. For example, it is
OK to create PV on unpartitioned DASD devices with LDL formatted. So
after lvm version containing the patch, LVs created on those devices
could not be found.
Signed-off-by: Lidong Zhong <lzhong@suse.com>
Ensure make clean cleans any left-over file from their previous
location so they are not in conflict with new ones.
Also hide error message when .commands file is not present.
Relocate generated configure.h and lvm-version.h outside
of compilable .c source tree.
The reason is behind - when compiling in builddir != srcdir
the generated file in lib/misc/configure.h was used for all compiled
source file except ones located in lib/misc dir - those would have used
configure.h file located in this dir - if there have existed one (i.e.
from some other build)
This problem was only visible, when srcdir == buildir was used before
trying to use srcdri != builddir (as configure.h appeared then in
srcdir).
Just like MD filtering that detects components of software RAID (md),
add detection for firmware RAID.
We're not adding any native code to detect this - there are lots of
firmware RAIDs out there which is just out of LVM scope. However,
with current changes with which we're able to get device info from
external sources (e.g. external_device_info_source="udev"), we can
do this easily if the external device status source has this kind
of information - which is the case of "udev" source where the results
of blkid scans are stored.
This detection should cover all firmware RAIDs that blkid can detect and
which are identified as:
ID_FS_TYPE = {adaptec,ddf,hpt45x,hpt37x,isw,jmicron,lsi_mega,nvidia,promise_fasttrack,silicon_medley,via}_raid_member
Usable device filter is responsible for filtering out unusable DM devices.
The filter has 3 modes of operation:
- FILTER_MODE_NO_LVMETAD:
When this mode is used, we check DM device usability by looking:
- whether device is empty
- whether device is blocked
- whether device is suspended (only on devices/ignore_suspended_devices=1)
- whether device uses an error target
- whether device name/uuid is reserved
- FILTER_MODE_PRE_LVMETAD:
When this mode is used, we check DM device usability by looking:
- whether device is empty
- whether device is suspended (only on devices/ignore_suspended_devices=1)
- whether device uses an error target
- whether device name/uuid is reserved
- FILTER_MODE_POST_LVMETAD:
When this mode is used, we check DM device usability by looking:
- whether device is blocked
- whether device is suspended (only on devices/ignore_suspended_devices=1)
These modes will be used by subsequent patch to create different
instances of this filter, depending on lvmetad use.
A cache LV - from LVM's perpective - is a user accessible device that
links the cachepool LV and the origin LV. The following functions
were added to facilitate the creation and removal of this top-level
LV:
1) 'lv_cache_create' - takes a cachepool and an origin device and links
them into a new top-level LV of 'cache' segment type. No allocation
is necessary in this function, as the sub-LVs contain all of the
necessary allocated space. Only the top-level layer needs to be
created.
2) 'lv_cache_remove' - this function removes the top-level LV of a
cache LV - promoting the cachepool and origin sub-LVs to top-level
devices and leaving them exposed to the user. That is, the
cachepool is unlinked and free to be used with another origin to
form a new cache LV; and the origin is no longer cached.
(Currently, if the cache needs to be flushed, it is done in this
function and the function waits for it to complete before proceeding.
This will be taken out in a future patch in favor of polling.)
This patch adds the new cachepool segment type - the first of two
necessary to eventually create 'cache' logical volumes. In addition
to the new segment type, updates to makefiles, configure files, the
lv_segment struct, and some necessary libdevmapper flags.
The cachepool is the LV and corresponding segment type that will hold
all information pertinent to the cache itself - it's size, cachemode,
cache policy, core arguments (like migration_threshold), etc.
Functions that handle set-up, tear-down and creation of thin pool
volumes will be more generally applicable when more targets exist
that make use of device-mapper's persistent data format. One of
these targets is the dm-cache target. I've selected some functions
that will be useful for the cache segment type to be moved, since
they will no longer be thin pool specific but are more broadly
useful to any segment type that makes use of a 'pool' LV.
Split out the partitioned device filter that needs to open the device
and move the multipath filter in front of it.
When a device is multipathed, sending I/O to the underlying paths may
cause problems, the most obvious being I/O errors visible to lvm if a
path is down.
Revert the incorrect <backtrace> messages added when a device doesn't
pass a filter.
Log each filter initialisation to show sequence.
Avoid duplicate 'Using $device' debug messages.
The common bits from lib/report/properties.[c|h] have
been moved to lib/properties/prop_common.[c|h] to allow
re-use of property handling functionality without
polluting the report handling functionality.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Add filter which tries to check if scanned device is part
of active multipath.
Firstly, only SCSI major number devices are handled in filter.
Then it checks if device has exactly one holder (in sysfs) and
if it is device-mapper device and DM-UUID is prefixed by "MPATH-".
If so, this device is filtered out.
The whole filter can be switched off by setting
mpath_component_detection in lvm.conf.
https://bugzilla.redhat.com/show_bug.cgi?id=597010
Signed-off-by: Milan Broz <mbroz@redhat.com>
Implementation described in doc/lvm2-raid.txt.
Basic support includes:
- ability to create RAID 1/4/5/6 arrays
- ability to delete RAID arrays
- ability to display RAID arrays
Notable missing features (not included in this patch):
- ability to clean-up/repair failures
- ability to convert RAID segment types
- ability to monitor RAID segment types
This patch is similar to the other patches for pv and vg
functionality, and separates lv functionality into separate
files, concentrating on reporting fields and simple functions.
