IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Move check for presence of raid4 into the right place
so there is no way how to hit activation of any LV
with raid4 on kernel which does not support it.
When reshape space is allocated anew, an update and reload is needed to
promote the new size to the cluster node with the exclusively active RaidLV
or reloading the RaidLV will fail with a size related error. Additionally,
store "data_offset <sectors>" with the RaidLV in the lvm2 metadata so that
it can be retrieved on cluster nodes.
Process allocation of reshape space on a 2-legged raid4/5 (interim layout
to convert from/to linear via raid1) properly in the cluster.
Resolves: rhbz1461562
Resolves: rhbz1448116
Relative to last comit ddf2a1d656:
adjust the dm-raid target version to 1.12.0 which shows
mandatory kernel MD deadlock fixes related to reshaping
are presant in the kernel.
Related: rhbz1443999
Two of the sync actions performed by the kernel (aka MD runtime) are
"resync" and "recover". The "resync" refers to when an entirely new array
is going through the process of initializing (or resynchronizing after an
unexpected shutdown). The "recover" is the process of initializing a new
member device to the array. So, a brand new array with all new devices
will undergo "resync". An array with replaced or added sub-LVs will undergo
"recover".
These two states are treated very differently when failures happen. If any
device is lost or replaced while "resync", there are no worries. This is
because any writes created from the inception of the array have occurred to
all the devices and can be safely recovered. Even though non-initialized
portions will still be resync'ed with uninitialized data, it is ok. However,
if a pre-existing device is lost (aka, the original linear device in a
linear -> raid1 convert) during a "recover", data loss can be the result.
Thus, writes are errored by the kernel and recovery is halted. The failed
device must be restored or removed. This is the correct behavior.
Unfortunately, we were treating an up-convert from linear as a "resync"
when we should have been treating it as a "recover". This patch
removes the special case for linear upconvert. It allows each new image
sub-LV to be marked with a rebuild flag and treats the array as 'in-sync'.
This has the correct effect of causing the upconvert to be treated as a
"recover" rather than a "resync". There is no need to flag these two states
differently in LVM metadata, because they are already considered differently
by the kernel RAID metadata. (Any activation/deactivation will properly
resume the "recover" process and not a "resync" process.)
We make this behavior change based on the presense of dm-raid target
version 1.9.0+.
This reverts commit 1e4462dbfb
in favour of an enhanced solution avoiding changes in liblvm
completetly by checking the target versions in libdm and emitting
the respective parameter lines.
The libdevmapper interface compares existing table line retrieved from
the kernel to new table line created to decide if it can suppress a reload.
Any difference between input and output of the table line is taken to be a
change thus causing a table reload.
The dm-raid target started to misorder the raid parameters (e.g. 'raid10_copies')
starting with dm-raid target version 1.9.0 up to (excluding) 1.11.0. This causes
runtime failures (limited to raid10 as of tests) and needs to be reversed to allow
e.g. old lvm2 uspace to run properly.
Check for the aforementioned version range and adjust creation of the table line
to the respective (mis)ordered sequence inside and correct order outside the range
(as described for the raid target in the kernels Documentation/device-mapper/dm-raid.txt).
Starting with dm-raid target version 1.9.0 shrinking of mapped devices is supported.
Check for support being present in lvresize and lvreduce.
Related: rhbz1394048
Recently added check for reshaping in this function called for
a cleanup to avoid proliferating it with more explicit conditionals.
Base the reshaping check on the given _features array.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Commit 27384c52cf lowered the maximum number of devices
back to 64 for compatibility.
Because more members have been added to the API in
'struct dm_tree_node_raid_params *', we have to version
the public libdm RAID API to not break any existing users.
Changes:
- keep the previous 'struct dm_tree_node_raid_params' and
dm_tree_node_add_raid_target_with_params()/dm_tree_node_add_raid_target()
in order to expose the already released public RAID API
- introduce 'struct dm_tree_node_raid_params_v2' and additional functions
dm_tree_node_add_raid_target_with_params_v2()/dm_tree_node_add_raid_target_v2()
to be used by the new lvm2 lib reshape extentions
With this new API, the bitfields for rebuild/writemostly legs in
'struct dm_tree_node_raid_params_v2' can be raised to 256 bits
again (253 legs maximum supported in MD kernel).
Mind that we can limit the maximum usable number via the
DEFAULT_RAID{1}_MAX_IMAGES definition in defaults.h.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces more local infrastructure to raid_manip.c
used by followup patches.
Changes:
- add lv_raid_data_copies returning raid type specific number;
needed for raid10 with more than 2 data copies
- remove _shift_and_rename_image_components() constraint
to support more than 10 raid legs
- add function to calculate total rimage length used by out-of-place
reshape space allocation
- add out-of-place reshape space alloc/relocate/free functions
- move _data_rimages_count() used by reshape space alloc/realocate functions
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces infrastructure prerequisites to be used
by raid_manip.c extensions in followup patches.
This base is needed for allocation of out-of-place
reshape space required by the MD raid personalities to
avoid writing over data in-place when reading off the
current RAID layout or number of legs and writing out
the new layout or to a different number of legs
(i.e. restripe)
Changes:
- add members reshape_len to 'struct lv_segment' to store
out-of-place reshape length per component rimage
- add member data_copies to struct lv_segment
to support more than 2 raid10 data copies
- make alloc_lv_segment() aware of both reshape_len and data_copies
- adjust all alloc_lv_segment() callers to the new API
- add functions to retrieve the current data offset (needed for
out-of-place reshaping space allocation) and the devices count
from the kernel
- make libdm deptree code aware of reshape_len
- add LV flags for disk add/remove reshaping
- support import/export of the new 'struct lv_segment' members
- enhance lv_extend/_lv_reduce to cope with reshape_len
- add seg_is_*/segtype_is_* macros related to reshaping
- add target version check for reshaping
- grow rebuilds/writemostly bitmaps to 246 bit to support kernel maximal
- enhance libdm deptree code to support data_offset (out-of-place reshaping)
and delta_disk (legs add/remove reshaping) target arguments
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
Add:
- support for segment types raid6_{ls,rs,la,ra}_6
(striped raid with dedicated last Q-Syndrome SubLVs)
- conversion support from raid5_{ls,rs,la,ra} to/from raid6_{ls,rs,la,ra}_6
- setting convenient segtypes on conversions from/to raid4/5/6
- related tests to lvconvert-raid-takeover.sh factoring
out _lvcreate,_lvconvert funxtions
Related: rhbz1366296
Add:
- support for segment type raid6_n_6 (striped raid with dedicated last parity/Q-Syndrome SubLVs)
- conversion support from striped/raid0/raid0_meta/raid4 to/from raid6_n_6
- related tests to lvconvert-raid-takeover.sh
Related: rhbz1366296
Add:
- support for segment type raid5_n (striped raid with dedicated last parity SubLVs)
- conversion support from striped/raid0/raid0_meta/raid4 to/from raid5_n
- related tests to lvconvert-raid-takeover.sh
Related: rhbz1366296
RAID is LV property
TODO: only 2 flags are seg->status: PVMOVE & MERGING
At least the second one should be soon elimanted as again
we merge LV not a segment.
Check for dm-raid target version with non-standard raid4 mapping expecting the dedicated
parity device in the last rather than the first slot and prohibit to create, activate or
convert to such LVs from striped/raid0* or vice-versa in order to avoid data corruption.
Add related tests to lvconvert-raid-takeover.sh
Resolves: rhbz1388962
Now we reference segment name via lvseg_name() and
we can drop default implementation and leave its
function pointer to be NULL.
Default give us 'return seg->segtype->name'.
We are not using already defined segement type names where we could.
There is a lot of other places in device-mapper and LVM2 we have those
hardcoded so we should better finally have a common interface in
libdevmapper to avoid this.
Test raid10 availability as a target feature (instead of doing
it in all the places where raid10 should be checked).
TODO: activation needs runtime validation - so metadata with raid10
are skipped from activation in user-friendly way in lvm2.
