IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The systemd generators are executed very early during the switch
from initramfs to system partition and the syslog is not yet fully
operational - it may cause blocking, if some debug logging is enabled
at the same time in /etc/lvm/lvm.conf log{} section.
To avoid timeouting and killing this generator - rather enhance lvm
code to suppress any syslog communication when LVM_SUPPRESS_SYSLOG
envvar is set.
Use of this envvar is needed since the parsing of i.e. cmdline options
that could eventually override lvm.conf setting happens in this case
way too late and number of lines could have been already streamed to
syslog.
In few cases error paths from initialization were returned as
'success == 1'.
Also assing num_mb with single compare checking valid sector_size.
For dumb compiler make num_mb always defined.
Drop very old original format of VDO target and focus on V2 version.
So some variables were renamed or replaced.
There is no compatibility preserved (with assumption so far this is
experimental feature and there is no real user).
Note - version currently VDO calls this version 6.2.
This is a followup patch to commit edb72cb70c
to support related lvm2 test suite tests.
A 'global/support_mirrored_mirror_log' bool configuration variable gets
introduced allowing the creation of, or conversion to mirrored 'mirror'
logs if set. The capability to create these in turn allows the rest of
the tests to perform activation of such existing LVs and their conversions
to disk/core 'mirror' logs.
Display a disclaimer warning if enabled that this is not for regular use.
Add definition of the enabled config option to respective test scripts.
Related: rhbz1643562
Scenario: Given an existed LV `lvol0`, I want to create another LV
on the PVs used by `lvol0`.
I use `build_parallel_areas_from_lv()` to obtain the `pv_list` of each segments.
However, the returned `pv_list` is not properly initialized, which causes
segfault in subsequent operations.
Ensure configure.h is always 1st. included header.
Maybe we could eventually introduce gcc -include option, but for now
this better uses dependency tracking.
Also move _REENTRANT and _GNU_SOURCE into configure.h so it
doesn't need to be present in various source files.
This ensures consistent compilation of headers like stdio.h since
it may produce different declaration.
There's a small window during creation of a new RaidLV when
rmeta SubLVs are made visible to wipe them in order to prevent
erroneous discovery of stale RAID metadata. In case a crash
prevents the SubLVs from being committed hidden after such
wiping, the RaidLV can still be activated with the SubLVs visible.
During deactivation though, a deadlock occurs because the visible
SubLVs are deactivated before the RaidLV.
The patch adds _check_raid_sublvs to the raid validation in merge.c,
an activation check to activate.c (paranoid, because the merge.c check
will prevent activation in case of visible SubLVs) and shares the
existing wiping function _clear_lvs in raid_manip.c moved to lv_manip.c
and renamed to activate_and_wipe_lvlist to remove code duplication.
Whilst on it, introduce activate_and_wipe_lv to share with
(lvconvert|lvchange).c.
Resolves: rhbz1633167
In RHEL7 we marked mirrored mirror logs as deprecated and
added a related message. This patch prohibits creating new
'mirror' LVs with that log type or converting existing LVs
to have one.
Existing LVs with mirrored mirror log can be activated
and converted to disk/core logs.
Avoid double deprecation message when running lvconvert.
Resolves: rhbz1643562
commit de28637
scan: use full md filter when md 1.0 devices are present
missed the fact that md superblock version 0.90 also puts
metadata at the end of the device, so the full md filter
needs to be used when either 0.90 or 1.0 is present.
. When using default settings, this commit should change
nothing. The first PE continues to be placed at 1 MiB
resulting in a metadata area size of 1020 KiB (for
4K page sizes; slightly smaller for larger page sizes.)
. When default_data_alignment is disabled in lvm.conf,
align pe_start at 1 MiB, based on a default metadata area
size that adapts to the page size. Previously, disabling
this option would result in mda_size that was too small
for common use, and produced a 64 KiB aligned pe_start.
. Customized pe_start and mda_size values continue to be
set as before in lvm.conf and command line.
. Remove the configure option for setting default_data_alignment
at build time.
. Improve alignment related option descriptions.
. Add section about alignment to pvcreate man page.
Previously, DEFAULT_PVMETADATASIZE was 255 sectors.
However, the fact that the config setting named
"default_data_alignment" has a default value of 1 (MiB)
meant that DEFAULT_PVMETADATASIZE was having no effect.
The metadata area size is the space between the start of
the metadata area (page size offset from the start of the
device) and the first PE (1 MiB by default due to
default_data_alignment 1.) The result is a 1020 KiB metadata
area on machines with 4KiB page size (1024 KiB - 4 KiB),
and smaller on machines with larger page size.
If default_data_alignment was set to 0 (disabled), then
DEFAULT_PVMETADATASIZE 255 would take effect, and produce a
metadata area that was 188 KiB and pe_start of 192 KiB.
This was too small for common use.
This is fixed by making the default metadata area size a
computed value that matches the value produced by
default_data_alignment.
The pvscan systemd service for autoactivation was
mistakenly dropped along with the lvmetad related
services.
The activation generator program now looks at the new
lvm.conf setting "event_activation" (default 1) to
switch between event activation and direct activation.
Previously, the old use_lvmetad setting was used to
switch between event and direct activation.
fix lseek error check
fix read/write error checks
handle zero return from read and write
don't return an error for short io
fix partial read/write loop
io_setup() for aio may fail if a system has reached the
aio request limit. In this case, fall back to using
sync io. Also, lvm use of aio can be disabled entirely
with config setting global/use_aio=0.
The system limit for aio requests can be seen from
/proc/sys/fs/aio-max-nr
The current usage of aio requests can be seen from
/proc/sys/fs/aio-nr
The system limit for aio requests can be increased by
setting fs.aio-max-nr using sysctl.
Also add last-byte limit to the sync io code.
Commit 813347cf84 added extra validation,
however in this particular we do want to trim suffix out so rather ignore
resulting error code here intentionaly.
If a single, standard LV is specified as the cache, use
it directly instead of converting it into a cache-pool
object with two separate LVs (for data and metadata).
With a single LV as the cache, lvm will use blocks at the
beginning for metadata, and the rest for data. Separate
dm linear devices are set up to point at the metadata and
data areas of the LV. These dm devs are given to the
dm-cache target to use.
The single LV cache cannot be resized without recreating it.
If the --poolmetadata option is used to specify an LV for
metadata, then a cache pool will be created (with separate
LVs for data and metadata.)
Usage:
$ lvcreate -n main -L 128M vg /dev/loop0
$ lvcreate -n fast -L 64M vg /dev/loop1
$ lvs -a vg
LV VG Attr LSize Type Devices
main vg -wi-a----- 128.00m linear /dev/loop0(0)
fast vg -wi-a----- 64.00m linear /dev/loop1(0)
$ lvconvert --type cache --cachepool fast vg/main
$ lvs -a vg
LV VG Attr LSize Origin Pool Type Devices
[fast] vg Cwi---C--- 64.00m linear /dev/loop1(0)
main vg Cwi---C--- 128.00m [main_corig] [fast] cache main_corig(0)
[main_corig] vg owi---C--- 128.00m linear /dev/loop0(0)
$ lvchange -ay vg/main
$ dmsetup ls
vg-fast_cdata (253:4)
vg-fast_cmeta (253:5)
vg-main_corig (253:6)
vg-main (253:24)
vg-fast (253:3)
$ dmsetup table
vg-fast_cdata: 0 98304 linear 253:3 32768
vg-fast_cmeta: 0 32768 linear 253:3 0
vg-main_corig: 0 262144 linear 7:0 2048
vg-main: 0 262144 cache 253:5 253:4 253:6 128 2 metadata2 writethrough mq 0
vg-fast: 0 131072 linear 7:1 2048
$ lvchange -an vg/min
$ lvconvert --splitcache vg/main
$ lvs -a vg
LV VG Attr LSize Type Devices
fast vg -wi------- 64.00m linear /dev/loop1(0)
main vg -wi------- 128.00m linear /dev/loop0(0)
The lvmlock LV size was not adjusted correctly for 512 vs 4K
sector sizes which influence the lease size used by sanlock.
When lvmlock was automatically extended, the zeroing through
bcache wasn't working.
lvm uses a bcache block size of 128K. A bcache block
at the end of the metadata area will overlap the PEs
from which LVs are allocated. How much depends on
alignments. When lvm reads and writes one of these
bcache blocks to update VG metadata, it can also be
reading and writing PEs that belong to an LV.
If these overlapping PEs are being written to by the
LV user (e.g. filesystem) at the same time that lvm
is modifying VG metadata in the overlapping bcache
block, then the user's updates to the PEs can be lost.
This patch is a quick hack to prevent lvm from writing
past the end of the metadata area.
This reverts commit 16ae968d24.
We need to come up with a better fix, because we fall short
wiping all known signatures when not using the wipe_lv API.
lvm metadata writes, commits and activations are performed
for (newly) allocated RAID metadata SubLVs to wipe any preexisiting
data thus avoid false raid superblock positives on RaidLV activation.
This process can be interrupted by command or system crashs
thus leaving stale SubLVs in the lvm metadata as a problem.
Because we hold an exclusive lock in this metadata SubLV wiping
process, we can address this problem by avoiding aforementioned
commits/writes/activations altogether wiping the respective first
sector of the first physical extent allocated to any metadata SubLV
directly via the existing dev_set() API.
Succeeds all LVM RAID tests.
Related: rhbz1633167
When persistent_filter_create() fails, the existing passed filter
should be preserved, so it could be properly deleted on
error path - so new pfilter is assigned instead.
Previously the size was limited by checking if the
old and new copies of the metadata overlapped.
This generally limited the size to about half of
the total space, but it could be larger given the
size differences between old and new. Now add a
direct check to limit the size to half the space.
Remove another instance of an invalid check for metadata
overflow during read. The previous instance was removed
in commit 5fb15b193.
This was checking for metadata that that overflowed the
circular disk metadata buffer during read, but such metadata
cannot be written, so it shouldn't be possible to find see.
Also, the check was incorrect and could trigger when there
was no overflow.
This fixes a problem in commit e6bb780d24, in which the
back compat handling for the old locking_type=4 was
incorrectly translated to mean the same thing as --readonly,
which prevented activation because activation uses an
exclusive vg lock. Previously, locking_type=4 allowed
activation.
If we see locking_type 4 in an old config, translate it to
the new combination of --readonly and --sysinit, which we
now define to mean the --readonly behavior with an exception
to allow activation.
The vg_write/vg_commit code was imprecise, uncommented, and
hard to understand. Rewrite it with clearer, cleaner code,
extensive comments, descriptions of how it works, and add
more info in debugging output.
The minor changes in behavior are to things that were
either incorrect or probably unintended:
- vg_write/vg_commit no longer check that the current vgname at
the start of the text metadata matches the vgname being written.
This has already been done at least twice by the time they are
called, and repeating it again against the same cached data has
no use.
- A fragment of old removed code had been left behind that checked
if the old unused alignment policy would wrap. It was still
being checked to decide if the metadata area was full, which
could possibly cause an incorrect full metadata failure.
- vg_remove now clears both the raw_locns in the mda_header that
point to committed metadata (raw_locn slot 0) and precommitted
metadata (raw_locn slot 1). Previously it fully cleared the
committed slot, and would only clear the offset field in the
precommitted slot if it saw a problem with the metadata in the
vg being removed.
- read_metadata_location_summary was wrongly comparing the number
of wrapped bytes with an offset to report an error about the
metadata being too large. This wrong check is removed, it
could have resulted in erroneous errors.
Allow "lvconvert --type linear RaidLV" on a raid4 LV
providing convenient interim steps to convert to linear.
Add respective new test
lvconvert-raid-takeover-raid4_to_linear.sh
and
lvconvert-raid-takeover-linear_to_raid4.sh
for linear to raid4 once on it.
When converting from striped/raid0/raid0_meta
to raid6 with > 2 stripes, allow possible
direct conversion (to raid6_n_6).
In case of 2 stripes, first convert to raid5_n to restripe
to at least 3 data stripes (the raid6 minimum in lvm2) in
a second conversion before finally converting to raid6_n_6.
As before, raid6_n_6 then can be converted
to any other raid6 layout.
Enhance lvconvert-raid-takeover.sh to test the
2 stripes conversions to raid6.
Resolves: rhbz1624038
devices/scan_lvs (default 1) determines whether lvm
will scan LVs for layered PVs. The lvm behavior has
always been to scan LVs, but it's rare for LVs to have
layered PVs, and much more common for there to be many
LVs that substantially slow down scanning with no benefit.
This is implemented in the usable filter, and has the
same effect as listing all LVs in the global_filter.
This is the number of concurrent async io requests that
the scan layer will submit to the bcache layer. There
will be an open fd for each of these, so it is best to
keep this well below the default limit for max open files
(1024), otherwise lvm may get EMFILE from open(2) when
there are around 1024 devices to scan on the system.
"lvconvert --type linear RaidLV" on striped and raid4/5/6/10
have to provide the convenient interim layouts. Fix involves
a cleanup to the convenience type function.
As a result of testing, add missing sync waits to
lvconvert-raid-reshape-linear_to_raid6-single-type.sh.
Resolves: rhbz1447809
Conversion to striped from raid0/raid0_meta is directly possible.
Fix a regression setting superfluous interim raid5_n conversion type
introduced by commit bd7cdd0b09.
Add new test script lvconvert-raid0-striped.sh.
Resolves: rhbz1608067
With improved mirror activation code --splitmirror issue poppedup
since there was missing proper preload code and deactivation
for splitted mirror leg.
If a mirror LV is listed in read_only_volume_list, it would
still be activated rw. The activation would initially be
readonly, but the monitoring function would immediately
change it to rw. This was a regression from commit
fade45b1d1 mirror: improve table update
The monitoring function needs to copy the read_only setting
into the new set of mirror activation options it uses.
When vgcreate does an automatic pvcreate, it opens the
dev with O_EXCL to ensure no other subsystem is using
the device. This exclusive fd remained in bcache and
prevented activation parts of lvm from using the dev.
This appeared with vgcreate of a sanlock VG because of
the unique combination where the dev is not yet a PV,
so pvcreate is needed, and the vgcreate also creates
and activates an internal LV for sanlock.
Fix this by closing the exclusive fd after it's used
by pvcreate so that it won't interfere with other
bits of lvm that may try to use the device.
The 'lvconvert LV' command def has caused multiple problems
for command matching because it matches the required options
of any lvconvert command. Any lvconvert with incorrect options
ends up matching 'lvconvert LV', which then produces an error
about incorrect options being used for 'lvconvert LV'. This
prevents suggestions from nearest-command partial command matches.
Add a special case for 'lvconvert LV' so that it won't be used
as a partial match for a command that has options specified.
Native disk scanning is now both reduced and
async/parallel, which makes it comparable in
performance (and often faster) when compared
to lvm using lvmetad.
Autoactivation now uses local temp files to record
online PVs, and no longer requires lvmetad.
There should be no apparent command-level change
in behavior.
When lvmetad is not used, use temporary files to record
which PVs have appeared. Use these temp files to determine
when a VG is complete, to trigger autoactivation.
This change allows us to remove lvmetad while keeping the
same autoactivation behavior that lvmetad provides.
The temp files are created in /run/lvm/pvs_online/ and are
named for the PVID of the PV. The files contain the
major:minor of the device the PV was read from.
e.g. if VG foo has dev1 and dev2, then:
. pvscan --cache -aay dev1
reads vg metadata from dev1
creates /run/lvm/pvs_online/<pvid-of-dev1>
checks if all vg->pvs are online: no
. pvscan --cache -aay dev2
reads vg metadata from dev2
creates /run/lvm/pvs_online/<pvid-of-dev2>
checks if all vg->pvs are online: yes
autoactivates vg
A 'pvscan --cache dev' (without -aay) still records that
dev is online.
A 'pvscan --cache --major X --minor Y' after a device is
gone will remove the temp file for it.
A 'pvscan --cache [-aay]' (no devs) resets the state of
temp files by removing them all, then scanning all devs
and creating temp files for PVs that are found.
If no online files exist, the first pvscan --cache scans
all devs and creates temp files for any PVs found.
The scope of the temp files is only pvscan, and they are only
used for pvscan-based autoactivation. No other commands are
concerned with or aware of these temp files. When lvm creates
or removes PVs, no attempt is made to update the temp files.
Support vgchange usage with VDO segtype.
Also changing extent size need small update for vdo virtual extent.
TODO: API needs enhancements so it's not about adding ifs() everywhere.
When user create vdo-pool - use different automatic name.
So unlike with traditional LVs using lvol0, lvol1
use vpool0, vpool1...
TODO: apply similar for thin-pool & cache-pool...
To support autoloading of VDO dm target driver loading of 'kvdo'
kernel module is needed - ATM it's not using 'dm-vdo' name.
So to support this strange name - add temporarily solution to
autoload kvdo kernel module in this case.
When lvm2 command is executed in test mode, discard ioctl is skipped.
This may cause even data-loose in case, issuing discard for released
areas was enabled and user 'tested' lvreduce.
When allocating thin-pool with more then 1 device - try to
allocate 'metadataLV' with reuse of log-type allocation for mirror LV.
It should be naturally place on other device then 'dataLV'.
However due to somewhat hard to follow allocation logic code,
it's been rejected allocation in cases where there was not
enough space for data or metadata on single PV, thus to successed,
usage of segments was mandatory.
While user may use:
allocation/thin_pool_metadata_require_separate_pvs=1
to enforce separe meta and data LV - on default settings, this is not
enable thus segment allocation is meant to work.
NOTE:
As already said - the original intention of this whole 'if()' is unclear,
so try to split this test into multiple more simple tests that are more readable.
TODO: more validation.
Allow creation of any virtual segment type with just --virtualsize
specified without any real extent size give.
TODO: likely --type error,zero might be later enhanced to use -V
(along with -L) - but since those targets do not allocate real
space, supporting -V makes sense with them.
Amound of linked libraries grows.
Most of them we don't need to lock in, since we are not using
them in locked section, so skip locking them in memory.
It's important to lock memory beforo running SUSPEND ioctl - but whole
lvm preload runs in memory unlocked environment - as in this phase
memory allocation is allowed and is meant to happen.
Once all targets are preload and ready (confirmed from all targets)
we start suspending tree - and here the memory allocation (or i.e.
opening files) is no longer allowed - as it may cause kernel deadlock.
udev creates a train wreck of events if we open devices
with RDWR. Until we can fix/disable/scrap udev, work around
this by opening RDONLY and then closing/reopening RDWR when
a write is needed. This invalidates the bcache blocks for
the device before writing so it can trigger unnecessary
rereading.
It's no longer needed. Clustered VGs are now handled in
the same way as foreign VGs, and as shared VGs that
can't be accessed:
- A command processing all VGs sees a clustered VG,
prints a message ("Skipping clustered VG foo."),
skips it, and does not fail.
- A command where the clustered VG is explicitly
named on the command line, prints a message and fails.
"Cannot access clustered VG foo, see lvmlockd(8)."
The option is listed in the set of ignored options for
the commands that previously accepted it. (Removing it
entirely would cause commands/scripts to fail if they
set it.)
The md filter can operate in two native modes:
- normal: reads only the start of each device
- full: reads both the start and end of each device
md 1.0 devices place the superblock at the end of the device,
so components of this version will only be identified and
excluded when lvm uses the full md filter.
Previously, the full md filter was only used in commands
that could write to the device. Now, the full md filter
is also applied when there is an md 1.0 device present
on the system. This means the 'pvs' command can avoid
displaying md 1.0 components (at the cost of doubling
the i/o to every device on the system.)
(The md filter can operate in a third mode, using udev,
but this is disabled by default because there have been
problems with reliability of the info returned from udev.)
The previous method for forcibly changing a clustered VG
to a local VG involved using -cn and locking_type 0.
Since those options are deprecated, replace it with
the same command used for other forced lock type changes:
vgchange --locktype none --lockopt force.
vgreduce, vgremove and vgcfgrestore were acquiring
the orphan lock in the midst of command processing
instead of at the start of the command. (The orphan
lock moved to being acquired at the start of the
command back when pvcreate/vgcreate/vgextend were
reworked based on pvcreate_each_device.)
vgsplit also needed a small update to avoid reacquiring
a VG lock that it already held (for the new VG name).
A few places were calling a function to check if a
VG lock was held. The only place it was actually
needed is for pvcreate which wants to do its own
locking (and scanning) around process_each_pv.
The locking/scanning exceptions for pvcreate in
process_each_pv/vg_read can be enabled by just passing
a couple of flags instead of checking if the VG is
already locked. This also means that these special
cases won't be enabled unknowingly in other places
where they shouldn't be used.
