IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The device-mapper directory now holds a copy of libdm source. At
the moment this code is identical to libdm. Over time code will
migrate out to appropriate places (see doc/refactoring.txt).
The libdm directory still exists, and contains the source for the
libdevmapper shared library, which we will continue to ship (though
not neccessarily update).
All code using libdm should now use the version in device-mapper.
As we start refactoring the code to break dependencies (see doc/refactoring.txt),
I want us to use full paths in the includes (eg, #include "base/data-struct/list.h").
This makes it more obvious when we're breaking abstraction boundaries, eg, including a file in
metadata/ from base/
The clvmd saved_vg data is independent from the normal lvm
lvmcache vginfo data, so separate saved_vg from vginfo.
Normal lvm doesn't need to use save_vg at all, and in clvmd,
lvmcache changes on vginfo can be made without worrying
about unwanted effects on saved_vg.
I don't like having this in a common header because it means you end
up including too much and causing unneccessary dependencies. eg,
lib/misc/lib.h includes libdevmapper.h, internationalisation, and
logging stuff.
There are likely more bits of code that can be removed,
e.g. lvm1/pool-specific bits of code that were identified
using FMT flags.
The vgconvert command can likely be reduced further.
The lvm1-specific config settings should probably have
some other fields set for proper deprecation.
Recent changes allow some major simplification of the way
lvmcache works and is used. lvmcache_label_scan is now
called in a controlled fashion at the start of commands,
and not via various unpredictable side effects. Remove
various calls to it from other places. lvmcache_label_scan
should not be called from anywhere during a command, because
it produces an incorrect representation of PVs with no MDAs,
and misclassifies them as orphans. This has been a long
standing problem. The invalid flag and rescanning based on
that is no longer used and removed. The 'force' variation is
no longer needed and removed.
We can't let clvmd keep all scanned devs open,
which prevents them from being removed. So
drop the bcache data (and close fds) affter
doing a label scan.
Also set up bcache before the clvm-specific
vg_read (which needs to rescan the vg's devs
using bcache) and destroy the bcache after.
Since this function is called with 'fd == -1', but Coverity can't see
this path can't be visited with this argument, add explicit check for
valid descriptor.
When dmeventd thin plugin forks a configurable script, switch to use
execvp to pass whole environment present to dmeventd - so all configured
paths present at dmeventd startup are visible to script.
This was likely not a problem for common user enviroment,
however in test suite case variable like LVM_SYSTEM_DIR were
not actually used from test itself but rather from
a system present lvm.conf and this may have cause strange
behavior of a testing script.
Avoid using same return code for reporting 2 different things
and stricly report error code by return value and add new
parameter for reporting monitoring status.
This makes easier to recognize which error we got from dm_event
and continue only with ENOENT.
lvmdbusd executable script must use python3 interpreter detected by
configure script, as site-packages directory used for library is only
used by that interpreter.
When sanlock or dlm lock managers return an error number
that we don't recognize, replace it with a generic -ELMERR
which is defined in the set of special lvmlockd error
numbers. Otherwise, an unknown lock manager error number
could be misinterpreted for something else if it happened
to overlap another set of error numbers (which they have
not thus far.)
These less common errors returned from sanlock should
also cause sanlock to retry the lock acquire:
- i/o timeout occurs during sanlock_acquire().
other i/o on the same disk as the leases can cause
sanlock i/o timeouts.
- low level disk paxos contention between hosts naturally
causes one host to not acquire the lease. There are a
couple special error numbers associated with these cases
that should just be recognized as a normal failure to
acquire the lease.
In HA cluster, we have "clvm" resource agent to manage clvmd daemon.
The agent invokes clvmd like: "clvmd -T90 -d0", which always prints
a scaring error message:
"""
local socket: connect failed: No such file or directory
"""
When specifed with "-d" option, clvmd tries to check if an instance
of the clvmd daemon is already running through a testing connection.
The connect() will fail with this ENOENT error in such case, so supress
the error message in such case.
TODO: add missing error reaction code - since ofter log_error, program
is not supposed to continue running (log_error() is for reporting
stopping problems).
Signed-off-by: Eric Ren <zren@suse.com>
When dmeventd receives SIGTERM/INT/HUP/QUIT it validates if exit is possible.
If there was any device still monitored, such exit request used to
be ignored/refused. This 'usually' worked reasonably well, however if there
is very short time period between last device is unmonitored and signal
reception - there was possibility such EXIT was ignored, as dmeventd has
not yet got into idle state even commands like 'vgchange -an' has already
finished.
This patch changes logic towards scheduling EXIT to the nearest
point when there is no monitored device.
EXIT is never forgotten.
NOTE: if there is only a single monitored device and someone sends
SIGTERM and later someone uses i.e. 'lvchange --refresh' after
unmonitoring dmeventd will exit and new instance needs to be
started.
If you send a SIGUSR1 (10) to the daemon it will dump all the
threads current stacks to stdout. This will be useful when the
daemon is apparently hung and not processing requests.
eg.
$ sudo kill -10 <daemon pid>
Make sure that any and all code that executes in the main thread is
wrapped with a try/except block to ensure that at the very least
we log when things are going wrong.
In some cases we are seeing where there are no VGs, but the data returned from
lvm shows that the PVs have the following for the VG:
"vg_name":"[unknown]", "vg_uuid":""
The code was only checking for the exitence of the VG name and we called into
the function get_object_path_by_uuid_lvm_id which requires both the VG name and
the LV name to exist (asserts this) which results in the following stack trace:
Traceback (most recent call last):
File "/home/tasleson/lvm2/daemons/lvmdbusd/utils.py", line 563, in runner
obj._run()
File "/home/tasleson/lvm2/daemons/lvmdbusd/utils.py", line 584, in _run
self.rc = self.f(*self.args)
File "/home/tasleson/lvm2/daemons/lvmdbusd/fetch.py", line 26, in
_main_thread_load
cache_refresh=False)[1]
File "/home/tasleson/lvm2/daemons/lvmdbusd/pv.py", line 48, in load_pvs
emit_signal, cache_refresh)
File "/home/tasleson/lvm2/daemons/lvmdbusd/loader.py", line 37, in common
objects = retrieve(search_keys, cache_refresh=False)
File "/home/tasleson/lvm2/daemons/lvmdbusd/pv.py", line 40, in
pvs_state_retrieve
p["pv_attr"], p["pv_tags"], p["vg_name"], p["vg_uuid"]))
File "/home/tasleson/lvm2/daemons/lvmdbusd/pv.py", line 84, in __init__
vg_uuid, vg_name, vg_obj_path_generate)
File "/home/tasleson/lvm2/daemons/lvmdbusd/objectmanager.py", line 318,
in get_object_path_by_uuid_lvm_id
assert uuid
AssertionError
When executing in the main thread, if we encounter an exception we
will bypass the notify_all call on the condition and the calling thread
never wakes up.
@staticmethod
def runner(obj):
# noinspection PyProtectedMember
Exception thrown here
----> obj._run()
So the following code doesn't run, which causes calling thread to hang
with obj.cond:
obj.function_complete = True
obj.cond.notify_all()
Additionally for some unknown reason the stderr is lost.
Best guess is it's something to do with scheduling a python function
into the GLib.idle_add. That made finding issue quite difficult.
