IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
'lvm dumpconfig' now does a lot more than just dumping configuration
information and is no longer only a support tool. Users now need
to run it to find out about configuration information that has been
removed from the lvm.conf man page so we need to promote this to full
command line status as 'lvmconfig'. Also accept 'lvm config' and mention
it in the usage information of lvmconf (which should also get merged in
eventually).
Add support for 2 new envvars for internal lvm2 test suite
(though it could be possible usable for other cases)
LVM_LOG_FILE_EPOCH
Whether to add 'epoch' extension that consist from
the envvar 'string' + pid + starttime in kernel units
obtained from /proc/self/stat.
LVM_LOG_FILE_UNLINK_STATUS
Whether to unlink the log depending on return status value,
so if the command is successful the log is automatically
deleted.
API is still for now experimental to catch various issue.
In log messages refer to it as system ID (not System ID).
Do not put quotes around the system_id string when printing.
On the command line use systemid.
In code, metadata, and config files use system_id.
In lvmsystemid refer to the concept/entity as system_id.
The only realistic way for a host to have active LVs in a
foreign VG is if the host's system_id (or system_id_source)
is changed while LVs are active.
In this case, the active LVs produce an warning, and access
to the VG is implicitly allowed (without requiring --foreign.)
This allows the active LVs to be deactivated.
In this case, rescanning PVs for the VG offers no benefit.
It is not possible that rescanning would reveal an LV that
is active but wasn't previously in the VG metadata.
A foreign VG should be silently ignored by a reporting/display
command like 'vgs'. If the reporting/display command specifies
a foreign VG by name on the command line, it should produce an
error message.
Scanning commands pvscan/vgscan/lvscan are always allowed to
read and update caches from all PVs, including those that belong
to foreign VGs.
Other non-report/display/scan commands always ignore a foreign
VG, or report an error if they attempt to use a foreign VG.
vgimport should always invalidate the lvmetad cache because
lvmetad likely holds a pre-vgexported copy of the VG.
(This is unrelated to using foreign VGs; the pre-vgexported
VG may have had no system_id at all.)
Add --foreign to the remaining reporting and display commands plus
vgcfgbackup.
Add a NEEDS_FOREIGN_VGS flag for vgimport to always set --foreign.
If lvmetad is being used with --foreign, scan foreign VGs (currently
implemented as a full PV scan).
Handle these things centrally in lvmcmdline.c.
Also allow lvchange and vgchange -an/-aln to deactivate any foreign
LVs that happen to be active if something went wrong.
Remember to set the system ID when creating a new VG in vgsplit.
Once LVM_COMMAND_PROFILE environment variable is specified, the profile
referenced is used just like it was specified using "<lvm command> --commandprofile".
If both --commandprofile cmd line option and LVM_COMMAND_PROFILE env
var is used, the --commandprofile cmd line option gets preference.
New size_mb_arg_with_percent is able to read size_mb_arg
but also it's able to read % values.
Percent parsing is share with int_arg_with_sign_and_percent.
If root has locales with different decimal point then '.'
(i.e. Czech with ',') lets be tolerant and retry with
"C" locales in the case '.' is found during parse of number.
Locales are then restored back.
Fix lvm_split that is called when cmd line string is separated into
argv fields to recognize quote chars ('\'" and '"') properly and
when these quotes are used, consider the text within quotes as one
argument, do not separate it based on space characters inside.
The lvm_split is used during processing lvm shell command line or
when calling lvm commands through cmdlib (e.g. dmeventd plugins).
For example, the lvm shell scenario:
Before this patch:
$lvm
lvm> lvs --config 'global{ suffix=0 }'
Parse error at byte 9 (line 1): unexpected token
Failed to set overridden configuration entries.
With this patch applied:
$lvm
lvm> lvs --config 'global{ suffix=0 }'
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
root fedora -wi-ao---- 9.00g
swap fedora -wi-ao---- 512.00m
(Exactly the same problem is hit when calling LVM commands with
quoted arguments via lvm2cmd lib in dmeventd plugins.)
We need to use proper filter chain when we disable lvmetad use
explicitly in the code by calling lvmetad_set_active(0) while
overriding existing configuration. We need to reinitialize filters
in this case so proper filter chain is used. The same applies
for the other way round - when we enable lvmetad use explicitly in
the code (though this is not yet used).
Currently, there are 5 things that device_is_usable function checks
(for DM devices only, of course):
- is device empty?
- is device blocked? (mirror)
- is device suspended?
- is device composed of an error target?
- is device name/uuid reserved?
If answer to any of these questions is "yes", then the device is not usable.
This patch just adds possibility to choose what to check for exactly - the
device_is_usable function now accepts struct dev_usable_check_params make
this selection possible. This is going to be used by subsequent patches.
Do not let fly metadata with just 'minor' set
(since they would not be readable on older version)
Be permissive with invalid major/minor number and
just report them as problem, but allow to use
such metadata with default major:minor.
Move common code for reading and processing
of --persistent arguments for lvcreate and lvchange
into lvmcmdline.
Reuse validate_major_minor() routine for validation.
Don't blindly activate LVs after change in cluster
and instead only local reactivation is supported.
(we have now many limited targets now).
Dropping 'sigint_caught()' handling, since
prompt() is resolving this case itself.
This message should be printed only for activation commands,
however since the handling of this flag is not correct
(rhbz 1140029) and will require further changes,
do now just a minor change and switch message into log_debug
(so it's not printed i.e. with every 'lvs -v')
Revert logic and rename new arg_ functions to:
arg_from_list_is_set()
arg_outside_list_is_set()
When err_found is given, log_error message is automaticaly
printed.
Currently, we have two modes of activation, an unnamed nominal mode
(which I will refer to as "complete") and "partial" mode. The
"complete" mode requires that a volume group be 'complete' - that
is, no missing PVs. If there are any missing PVs, no affected LVs
are allowed to activate - even RAID LVs which might be able to
tolerate a failure. The "partial" mode allows anything to be
activated (or at least attempted). If a non-redundant LV is
missing a portion of its addressable space due to a device failure,
it will be replaced with an error target. RAID LVs will either
activate or fail to activate depending on how badly their
redundancy is compromised.
This patch adds a third option, "degraded" mode. This mode can
be selected via the '--activationmode {complete|degraded|partial}'
option to lvchange/vgchange. It can also be set in lvm.conf.
The "degraded" activation mode allows RAID LVs with a sufficient
level of redundancy to activate (e.g. a RAID5 LV with one device
failure, a RAID6 with two device failures, or RAID1 with n-1
failures). RAID LVs with too many device failures are not allowed
to activate - nor are any non-redundant LVs that may have been
affected. This patch also makes the "degraded" mode the default
activation mode.
The degraded activation mode does not yet work in a cluster. A
new cluster lock flag (LCK_DEGRADED_MODE) will need to be created
to make that work. Currently, there is limited space for this
extra flag and I am looking for possible solutions. One possible
solution is to usurp LCK_CONVERT, as it is not used. When the
locking_type is 3, the degraded mode flag simply gets dropped and
the old ("complete") behavior is exhibited.
The --binary option, if used, causes all the binary values reported
in reporting commands to be displayed as "0" or "1" instead of descriptive
literal values (value "unknown" is still used for values that could not be
determined).
Also, add report/binary_values_as_numeric lvm.conf option with the same
functionality as the --binary option (the --binary option prevails
if both --binary cmd option and report/binary_values_as_numeric lvm.conf
option is used at the same time). The report/binary_values_as_numeric is
also profilable.
This makes it easier to use and check lvm reporting command output in scripts.
LVM has restricter character set that is allowed for VG-LV names
and the dm names constructed do not contain any blacklisted characters
that would require name mangling.
Also, when any other device-mapper device is scanned that could
possibly contain such blacklisted characters, we reference the
device by its major:minor instead of dm name (e.g. _device_is_usable fn).
- When defining configuration source, the code now uses separate
CONFIG_PROFILE_COMMAND and CONFIG_PROFILE_METADATA markers
(before, it was just CONFIG_PROFILE that did not make the
difference between the two). This helps when checking the
configuration if it contains correct set of options which
are all in either command-profilable or metadata-profilable
group without mixing these groups together - so it's a firm
distinction. The "command profile" can't contain
"metadata profile" and vice versa! This is strictly checked
and if the settings are mixed, such profile is rejected and
it's not used. So in the end, the CONFIG_PROFILE_COMMAND
set of options and CONFIG_PROFILE_METADATA are mutually exclusive
sets.
- Marking configuration with one or the other marker will also
determine the way these configuration sources are positioned
in the configuration cascade which is now:
CONFIG_STRING -> CONFIG_PROFILE_COMMAND -> CONFIG_PROFILE_METADATA -> CONFIG_FILE/CONFIG_MERGED_FILES
- Marking configuration with one or the other marker will also make
it possible to issue a command context refresh (will be probably
a part of a future patch) if needed for settings in global profile
set. For settings in metadata profile set this is impossible since
we can't refresh cmd context in the middle of reading VG/LV metadata
and for each VG/LV separately because each VG/LV can have a different
metadata profile assinged and it's not possible to change these
settings at this level.
- When command profile is incorrect, it's rejected *and also* the
command exits immediately - the profile *must* be correct for the
command that was run with a profile to be executed. Before this
patch, when the profile was found incorrect, there was just the
warning message and the command continued without profile applied.
But it's more correct to exit immediately in this case.
- When metadata profile is incorrect, we reject it during command
runtime (as we know the profile name from metadata and not early
from command line as it is in case of command profiles) and we
*do continue* with the command as we're in the middle of operation.
Also, the metadata profile is applied directly and on the fly on
find_config_tree_* fn call and even if the metadata profile is
found incorrect, we still need to return the non-profiled value
as found in the other configuration provided or default value.
To exit immediately even in this case, we'd need to refactor
existing find_config_tree_* fns so they can return error. Currently,
these fns return only config values (which end up with default
values in the end if the config is not found).
- To check the profile validity before use to be sure it's correct,
one can use :
lvm dumpconfig --commandprofile/--metadataprofile ProfileName --validate
(the --commandprofile/--metadataprofile for dumpconfig will come
as part of the subsequent patch)
- This patch also adds a reference to --commandprofile and
--metadataprofile in the cmd help string (which was missing before
for the --profile for some commands). We do not mention --profile
now as people should use --commandprofile or --metadataprofile
directly. However, the --profile is still supported for backward
compatibility and it's translated as:
--profile == --metadataprofile for lvcreate, vgcreate, lvchange and vgchange
(as these commands are able to attach profile to metadata)
--profile == --commandprofile for all the other commands
(--metadataprofile is not allowed there as it makes no sense)
- This patch also contains some cleanups to make the code handling
the profiles more readable...
When cmd refresh is called, we need to move any already loaded profiles
to profiles_to_load list which will cause their reload on subsequent
use. In addition to that, we need to take into account any change
in config/profile configuration setting on cmd context refresh
since this setting could be overriden with --config.
Also, when running commands in the shell, we need to remove the
global profile used from the configuration cascade so the profile
is not incorrectly reused next time when the --profile option is
not specified anymore for the next command in the shell.
This bug only affected profile specified by --profile cmd line
arg, not profiles referenced from LVM metadata.
Since commit f12ee43f2e call destroy,
it start to check all VGs are unlocked. However when we become_daemon,
we simply reset locking (since lock is still kept by parent process).
So implement a simple 'reset' flag.
Accept --ignoreskippedcluster with pvs, vgs, lvs, pvdisplay, vgdisplay,
lvdisplay, vgchange and lvchange to avoid the 'Skipping clustered
VG' errors when requesting information about a clustered VG
without using clustered locking and still exit with success.
The messages can still be seen with -v.
Udev daemon has recently introduced a limit on the number of udev
processes (there was no limit before). This causes a problem
when calling pvscan --cache -aay in lvmetad udev rules which
is supposed to activate the volumes. This activation is itself
synced with udev and so it waits for the activation to complete
before the pvscan finishes. The event processing can't continue
until this pvscan call is finished.
But if we're at the limit with the udev process count, we can't
instatiate any more udev processes, all such events are queued
and so we can't process the lvm activation event for which the
pvscan is waiting.
Then we're in a deadlock since the udev process with the
pvscan --cache -aay call waits for the lvm activation udev
processing to complete, but that will never happen as there's
this limit hit with the number of udev processes.
The process with pvscan --cache -aay actually times out eventually
(3min or 30sec, depends on the version of udev).
This patch makes it possible to run the pvscan --cache -aay
in the background so the udev processing can continue and hence
we can avoid the deadlock mentioned above.
Just to make it more clear and also not to confuse
config_valid with check against config definition
(and its 'valid' flag within the config defintion tree).
When placing the profile in a configuration cascade, this sequence is
used exactly:
CONFIG_STRING -> CONFIG_PROFILE -> CONFIG_FILE/MERGED_FILES
So if the profile is used, it overloads the lvm.conf (and any
existing tag configs). However, if "--config" is used to define
a custom configuration on command line, this overloads even the
profile config!
This patch adds --profile arg to lvm cmds and adds config/profile_dir
configuration setting to select the directory where profiles are stored
By default it's /etc/lvm/profile.
The profiles are added by using new "add_profile" fn and then loaded
using the "load_profile" fn. All profiles are stored in a cmd context
within the new "struct profile_params":
struct profile_params {
const char *dir;
struct profile *global_profile;
struct dm_list profiles_to_load;
struct dm_list profiles;
};
...where "dir" is the directory with profiles, "global_profile" is
the profile that is set globally via the --profile arg (IOW, not
set per VG/LV basis based on metadata record) and the "profiles"
is the list with loaded profiles.
