IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
It's possible for a dev-cache entry to remain after all
paths for it have been removed, and other parts of the
code expect that a dev always has a name. A better fix
may be to remove a device from dev-cache after all paths
to it have been removed.
When either logical block size or physical block size is 4K,
then lvmlockd creates sanlock leases based on 4K sectors,
but the lvm client side would create the internal lvmlock LV
based on the first logical block size it saw in the VG,
which could be 512. This could cause the lvmlock LV to be
too small to hold all the sanlock leases. Make the lvm client
side use the same sizing logic as lvmlockd.
dm-integrity stores checksums of the data written to an
LV, and returns an error if data read from the LV does
not match the previously saved checksum. When used on
raid images, dm-raid will correct the error by reading
the block from another image, and the device user sees
no error. The integrity metadata (checksums) are stored
on an internal LV allocated by lvm for each linear image.
The internal LV is allocated on the same PV as the image.
Create a raid LV with an integrity layer over each
raid image (for raid levels 1,4,5,6,10):
lvcreate --type raidN --raidintegrity y [options]
Add an integrity layer to images of an existing raid LV:
lvconvert --raidintegrity y LV
Remove the integrity layer from images of a raid LV:
lvconvert --raidintegrity n LV
Settings
Use --raidintegritymode journal|bitmap (journal is default)
to configure the method used by dm-integrity to ensure
crash consistency.
Initialization
When integrity is added to an LV, the kernel needs to
initialize the integrity metadata/checksums for all blocks
in the LV. The data corruption checking performed by
dm-integrity will only operate on areas of the LV that
are already initialized. The progress of integrity
initialization is reported by the "syncpercent" LV
reporting field (and under the Cpy%Sync lvs column.)
Example: create a raid1 LV with integrity:
$ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo
Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB.
Logical volume "rr_rimage_0_imeta" created.
Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB.
Logical volume "rr_rimage_1_imeta" created.
Logical volume "rr" created.
$ lvs -a foo
LV VG Attr LSize Origin Cpy%Sync
rr foo rwi-a-r--- 1.00g 4.93
[rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02
[rr_rimage_0_imeta] foo ewi-ao---- 12.00m
[rr_rimage_0_iorig] foo -wi-ao---- 1.00g
[rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45
[rr_rimage_1_imeta] foo ewi-ao---- 12.00m
[rr_rimage_1_iorig] foo -wi-ao---- 1.00g
[rr_rmeta_0] foo ewi-aor--- 4.00m
[rr_rmeta_1] foo ewi-aor--- 4.00m
When vdopool is activated standalone - we use a wrapping linear device
to hold actual vdo device active - for this we can set-up read-only
device to ensure there cannot be made write through this device to
actual pool device.
Creating a snapshot was using a persistent LV lock
on the origin, so if the origin LV was inactive at
the time of the snapshot the LV lock would remain.
(Running lvchange -an on the inactive LV would
clear the LV lock.) Use a transient LV lock so it
will be dropped if it was not locked previously.
When formating VDO volume, the calculated amound of bits
for 'vdoformat --slab-bits' parameter was shifted by 2 bits
(calculated size was making 2MiB vdo_slab_size_mb value appear like if
user would be specifying only 512KiB)
Fixed by properly converting internal size_mb value to KiB.
Fix the anoying kernel message reported:
device-mapper: cache: 253:2: metadata operation 'dm_cache_commit' failed: error = -5
which has been reported while cachevol has been removed.
Happened via confusing variable - so switch the variable to commonly user '_size'
which presents a value in sector units and avoid 'scaling' this as extent length
by vg extent size when placing 'error' target on removal path.
Patch shouldn't have impact on actual users data, since at this moment
of removal all date should have been already flushed to origin device.
m
The previous patch improved read of pipe when lvm2 was looking
for default logical size, but we clearly must read pipe also
for -V case, when the logical size is already defined.
Still the place can be better to block only particular reshape
operations which ATM cause kernel problems.
We check if the new number of images is higher - and prevent to take
conversion if the volume is in use (i.e. thin-pool's data LV).
clang: it's supposedly impossible path to hit, as we should always
have origin_lv defined when running this path, but adding protection
isn't a big issue to make this obvious to analyzer.
Since _reserve_area() may fail due to error allocation failure,
add support to report this already reported failure upward.
FIXME: it's log_error() without causing direct command failure.
Although we expect min_chunk_size to be 32bit value, for
large size of caches it might be useful to do calcs 64bit.
So to avoid doing shift as signed 32bit - use unsigned 64bit
from the start.
reporting fields (-o) directly from kernel:
writecache_total_blocks
writecache_free_blocks
writecache_writeback_blocks
writecache_error
The data_percent field shows used cache blocks / total cache blocks.
Until we resolve reshape for 'stacked' devices, we need to disable it.
So users can no longer reshape i.e. thin-pool data volumes, causing
ATM bad thin-pool problems.
After the VG lock is taken for vg_read, reread the mda_header
and compare the metadata text offset and checksum to what was
seen during label scan. If it is unchanged, then the metadata
has not changed since the label scan, and the metadata does not
need to be reread under the lock for command processing.
For commands that do not make changes (e.g. reporting), the
mda_header is reread and checked on one mda to decide if the
full metadata rereading can be skipped. For other commands
(e.g. modifying the vg) the mda_header is reread and checked
from all PVs. (These could probably just check one mda also.)
When pvcreate/pvremove prompt the user, they first release
the global lock, then acquire it again after the prompt,
to avoid blocking other commands while waiting for a user
response. This release/reacquire changes the locking
order with respect to the hints flock (and potentially other
locks). So, to avoid deadlock, use a nonblocking request
when reacquiring the global lock.
Avoid mem leaking hint on every loop continue and
allocate hint only when it's going to be added into list.
Switch to use 'dm_strncpy()' and validate sizes.
For dev_in_device_list() != 0 allocated 'devl' was
actually leaking - so instead allocate 'devl' only
when !dev_in_device_list() and indent code around.
Since we check for NULL pointers earlier we need
to be consistent across function - since the NULL
would applies across whole function.
When dropping 'mda' check - we are actually
already dereferencing it before - so it can't
be NULL at that places (and it's validated
before entering _read_mda_header_and_metadata).
dev_unset_last_byte() must be called while the fd is still valid.
After a write error, dev_unset_last_byte() must be called before
closing the dev and resetting the fd.
In the write error path, dev_unset_last_byte() was being called
after label_scan_invalidate() which meant that it would not unset
the last_byte values.
After a write error, dev_unset_last_byte() is now called in
dev_write_bytes() before label_scan_invalidate(), instead of by
the caller of dev_write_bytes().
In the common case of a successful write, the sequence is still:
dev_set_last_byte(); dev_write_bytes(); dev_unset_last_byte();
Signed-off-by: Zhao Heming <heming.zhao@suse.com>
When resizing 2 volumes like thin-pool and it's metadata and they
would be of a different type - command would be actually expecting
both LVs being of a same segtype - and would throw an error in
case they are different.
This patch fixes is by setting a new segtype from last segment of
2nd. extented device.
Also it fixes the possible 'percentage' extension setup that
might have been used for 'primary' volume - while the 'secondary'
LV always goes with direct size - as we do not support 'percentage'
setup for them
This affects maily usage of thin-pool where the extension of
thin-pool data size may also lead to extension of metadata size.
Instead of checking all LVs in a VG - do just a direct copy of LVs
from the existing list ->segs_using_thin_lv.
TODO: maybe it could be better to expose seg_list to /tools...
Enhance lv_info with lv_info_with_name_check.
This 'variant' not only check existance if UUID in DM table
but also compares its DM name whether it's matching expected LV name.
Otherwise activation may 'skip' activation with rename in case the
DM UUID already exists, just device is different name.
This change make fairly easier manipulation with i.e. detached mirror
leg which ATM is using same UUID - just the LV name have been changed.
Used code was not able to run 'activation' (and do a rename) and just
skipped the call. So the code used to do a workaround and 'tried'
to deactivate such LV firts - this however work only in non-clvmd case,
as cluster was not having the lock for deactivated LV.
With this extended lv_info code will run 'activation' and will
synchronize the name to match expected LV name.
Patch extends _lv_info() with new paramter 'with_name_check',
which is later translated into 'name_check' argument for
_info_run() which in case of name mismatch evaluates the
check as if device does not exists.
Such call is only used in one place _lv_activate() which then
let activation run. All other invocation of _info() calls
are left intact.
TODO: fix mirror table manipulation (and raid)....
The return value from bcache_invalidate_fd() was not being checked.
So I've introduced a little function, _invalidate_fd() that always
calls bcache_abort_fd() if the write fails.
The resume of 'released' 'COW' should preceed the resume of origin.
The fact we need to do the sequence differently for merge was
cause by bugs fixed in 2 previous commits - so we no longer need
to recognize 'merging' and we should always go with single
sequence.
The importance of this order is - to properly remove '-real' device
from origin LV. When COW is activated as 2nd. '-real' device is
kept in table as it cannot be removed during 1st. resume of origin,
and later activation of COW LV no longer builds tree associated
with origin LV.
When checking device id of a thin device that is just being
merged - the snapshot actually could have been already finished
which means '-real' suffix for the LV is already gone and just LV
is there - so check explicitely for this condition and use
correct UUID for this case.
When a cachevol LV is attached, have the LV keep it's lock
allocated. The lock on the cachevol won't be used while
it's attached. When the cachevol is split a new lock does
not need to be allocated. (Applies to cachevol usage by
both dm-cache and dm-writecache.)
When LV gets cached and uses cache-pool - such cache-pool
will now get _cpool suffix automatically.
Thus 'Pool' column for cached LV will now show either _cvol
or _cpool LV.
