IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Moved out from lib/display and a little documentation added.
It's tuned to LVM's requirements historically and its behaviour
might not always be what you would expect.
Move the DEBUG_MEM decision inside libdevmapper.so instead of exposing
it in libdevmapper.h which causes failures if the binary and library
were compiled with opposite debugging settings.
... Using uninitialized value "lockd_state" when calling "lockd_vg"
(even though lockd_vg assigns 0 to the lockd_state, but it looks at
previous state of lockd_state just before that so we need to have
that properly initialized!)
libdm/libdm-report.c:2934: uninit_use_in_call: Using uninitialized value "tm". Field "tm.tm_gmtoff" is uninitialized when calling "_get_final_time".
daemons/lvmlockd/lvmlockctl.c:273: uninit_use_in_call: Using uninitialized element of array "r_name" when calling "format_info_r_action". (just added FIXME as this looks unfinished?)
Existing messaging intarface for thin-pool has a few 'weak' points:
* Message were posted with each 'resume' operation, thus not allowing
activation of thin-pool with the existing state.
* Acceleration skipped suspend step has not worked in cluster,
since clvmd resumes only nodes which are suspended (have proper lock
state).
* Resume may fail and code is not really designed to 'fail' in this
phase (generic rule here is resume DOES NOT fail unless something serious
is wrong and lvm2 tool usually doesn't handle recovery path in this case.)
* Full thin-pool suspend happened, when taken a thin-volume snapshot.
With this patch the new method relocates message passing into suspend
state.
This has a few drawbacks with current API, but overal it performs
better and gives are more posibilities to deal with errors.
Patch introduces a new logic for 'origin-only' suspend of thin-pool and
this also relates to thin-volume when taking snapshot.
When suspend_origin_only operation is invoked on a pool with
queued messages then only those messages are posted to thin-pool and
actual suspend of thin pool and data and metadata volume is skipped.
This makes taking a snapshot of thin-volume lighter operation and
avoids blocking of other unrelated active thin volumes.
Also fail now happens in 'suspend' state where the 'Fail' is more expected
and it is better handled through error paths.
Activation of thin-pool is now not sending any message and leaves upto a tool
to decided later how to finish unfinished double-commit transaction.
Problem which needs some API improvements relates to the lvm2 tree
construction. For the suspend tree we do not add target table line
into the tree, but only a device is inserted into a tree.
Current mechanism to attach messages for thin-pool requires the libdm
to know about thin-pool target, so lvm2 currently takes assumption, node
is really a thin-pool and fills in the table line for this node (which
should be ensured by the PRELOAD phase, but it's a misuse of internal API)
we would possibly need to be able to attach message to 'any' node.
Other thing to notice - current messaging interface in thin-pool
target requires to suspend thin volume origin first and then send
a create message, but this could not have any 'nice' solution on lvm2
side and IMHO we should introduce something like 'create_after_resume'
message.
Patch also changes the moment, where lvm2 transaction id is increased.
Now it happens only after successful finish of kernel transaction id
change. This change was needed to handle properly activation of pool,
which is in the middle of unfinished transaction, and also this corrects
usage of thin-pool by external apps like Docker.
Add support for sending message in suspend tree for thin-pools.
When this operation is requested whole subtree suspend is then skipped.
This is experimantal support for new lvm2 code for sending message
in suspend phase where 'thin-pool origin-only suspend' will send
messages instead of really suspending thin-pool tree.
When suspening thin volume origin-only - only thin volume is suspended,
then messages are posted and thin-pool suspend is skipped.
Recognize date and time specification within selection criteria
that is formulated in a more free-form way besides to the original
basic YYYY-MM-DD HH:MM format that libdevmapper supports.
Currently, this free-form format is recognized for lv_time field.
Users are able to use expressions from this set:
- weekday names ("Sunday" - "Saturday" or abbreviated as "Sun" - "Sat")
- labels for points in time ("noon", "midnight")
- labels for a day relative to current day ("today", "yesterday")
- points back in time with relative offset from today (N is a number)
( "N" "seconds"/"minutes"/"hours"/"days"/"weeks"/"years" "ago")
( "N" "secs"/"mins"/"hrs" ... "ago")
( "N" "s"/"m"/"h" ... "ago")
- time specification either in hh:mm:ss format or with AM/PM suffixes
- month names ("January" - "December" or abbreviated as "Jan" - "Dec")
For example:
$ date
Fri Jul 3 10:11:13 CEST 2015
$ lvmconfig --type full report/time_format
time_format="%a %Y-%m-%d %T %z %Z [%s]"
$ lvs
LV VG Time
lvol0 vg Fri 2014-08-22 21:25:41 +0200 CEST [1408735541]
lvol2 vg Sun 2015-04-26 14:52:20 +0200 CEST [1430052740]
root fedora Wed 2015-05-27 08:09:21 +0200 CEST [1432706961]
swap fedora Wed 2015-05-27 08:09:21 +0200 CEST [1432706961]
lvol1 vg Tue 2015-06-30 03:25:43 +0200 CEST [1435627543]
lvol3 vg Tue 2015-06-30 14:52:23 +0200 CEST [1435668743]
lvol6 vg Wed 2015-07-01 13:35:56 +0200 CEST [1435750556]
lvol4 vg Thu 2015-07-02 12:12:02 +0200 CEST [1435831922]
lvol5 vg Thu 2015-07-02 14:30:32 +0200 CEST [1435840232]
$ lvs -S 'time=yesterday'
LV VG Time
lvol4 vg Thu 2015-07-02 12:12:02 +0200 CEST [1435831922]
lvol5 vg Thu 2015-07-02 14:30:32 +0200 CEST [1435840232]
$ lvs -S 'time since "June 30"'
LV VG Time
lvol1 vg Tue 2015-06-30 03:25:43 +0200 CEST [1435627543]
lvol3 vg Tue 2015-06-30 14:52:23 +0200 CEST [1435668743]
lvol6 vg Wed 2015-07-01 13:35:56 +0200 CEST [1435750556]
lvol4 vg Thu 2015-07-02 12:12:02 +0200 CEST [1435831922]
lvol5 vg Thu 2015-07-02 14:30:32 +0200 CEST [1435840232]
$ lvs -S 'time since "noon June 30"'
LV VG Time
lvol3 vg Tue 2015-06-30 14:52:23 +0200 CEST [1435668743]
lvol6 vg Wed 2015-07-01 13:35:56 +0200 CEST [1435750556]
lvol4 vg Thu 2015-07-02 12:12:02 +0200 CEST [1435831922]
lvol5 vg Thu 2015-07-02 14:30:32 +0200 CEST [1435840232]
$ lvs -S 'time since "2 July 9AM"'
LV VG Time
lvol4 vg Thu 2015-07-02 12:12:02 +0200 CEST [1435831922]
lvol5 vg Thu 2015-07-02 14:30:32 +0200 CEST [1435840232]
$ lvs -S 'time since "2 July 1PM"'
LV VG Time
lvol5 vg Thu 2015-07-02 14:30:32 +0200 CEST [1435840232]
...and so on.
Wire the dm_report_reserved_handler instance call in reporting/selection
infrastructure to handle reserved value actions (currently only
DM_REPORT_RESERVED_PARSE_FUZZY_NAME and DM_REPORT_RESERVED_GET_DYNAMIC_VALUE
actions).
With fuzzy names we mean the names for which it's hard or even impossible
to enumerate all possible variations of the name - the name needs to
be evaluated. An example of fuzzy name is a name which has a base
(substring) which matches and it can contain arbitrary variations
around this base. We can cover human language better with fuzzy
names as people may use several different names (or sentences) to
denote the same thing.
With dynamic values we mean the values which are not constants
and they need to be evaluated in runtime. An example of dynamic
value is a value which depends on current system state (e.g. time,
current configuration or any other state which may change and it
needs runtime evaluation).
There's a handler that can be registered with reporting/selection
using dm_report_reserved_handler instance. This is a central point
in which the computation/evaluation happens when processing reserved
values. Currently, there are two actions declared:
DM_REPORT_RESERVED_PARSE_FUZZY_NAME
(translates fuzzy name into canonical name)
DM_REPORT_RESERVED_GET_DYNAMIC_VALUE
(gets value for canonical name)
The handler is then registered as value in struct
dm_report_reserved_value (see explaining comments besided
the struct dm_report_reserved_value in libdevmapper.h).
Also, this patch provides support for simple caching of values
used during report/selection via dm_report_value_cache_{set,get}.
This is supposed to be used mainly in the dm_report_reserved_handler
instances to save values among calls so all the handler calls work
with the same base value used in computation/evaluation and/or
possibly to save resources if the evaluation is more time-consuming.
The cache is attached to the dm_report handle and so the cache is
dropped one dm_report is dropped.
Generic numbers and time values share some operators so make sure
we have the flags correctly adjusted based on expected type if
we're using reserved values.
_node_name() prepares into dm_tree internal buffer device
name and it (major:minor) for easy usage for debug messages.
To avoid any allocation a small buffer in struct dm_tree is preallocated
to store this message.
This patch adds support for time values used in reporting fields.
The raw values are always stored as number of seconds since epoch.
The support that comes with this patch is the basic one which allows
only for recognition of strictly formatted date and time in selection
criteria (the format follows a subset of formats defined by ISO 8601):
date time timezone
date:
YYYY-MM-DD (or shortly YYYYMMDD)
YYYY-MM (shortly YYYYMM), auto DD=1
YYYY, auto MM=01 and DD=01
time:
hh:mm:ss (or shortly hhmmss)
hh:mm (or shortly hhmm), auto ss=0
hh (or shortly hh), auto mm=0, auto ss=0
timezone (always with + or - sign):
+hh:mm or -hh:mm (or shortly +hhmm or -hhmm)
+hh or -hh
Or directly the time (number of seconds) since Epoch (1970-01-01 00:00:00 UTC)
when the number value is prefixed by "@":
@number_of_seconds_since_epoch
This patch also adds aliases for comparison operators
used together with time values which are more intuitive
to use:
since (as alias for >=)
after (as alias for >)
until (as alias for <=)
before (as alias for <)
For example:
$ lvmconfig --type full report/time_format
time_format="%Y-%m-%d %T %z %Z [%s]"
$ lvs -o name,time vg
LV Time
lvol0 2015-06-28 21:25:41 +0200 CEST [1435519541]
lvol1 2015-06-30 03:25:43 +0200 CEST [1435627543]
lvol2 2015-04-26 14:52:20 +0200 CEST [1430052740]
lvol3 2015-06-30 14:52:23 +0200 CEST [1435668743]
$ lvs vg -o name,time -S 'time since "2015-04-26 15:00" && time until "2015-06-30"'
LV Time
lvol0 2015-06-28 21:25:41 +0200 CEST [1435519541]
lvol1 2015-06-30 03:25:43 +0200 CEST [1435627543]
lvol3 2015-06-30 14:52:23 +0200 CEST [1435668743]
$ lvs vg -o name,time -S 'time since "2015-04-26 15:00" && time until "2015-06-30 6:00"'
LV Time
lvol0 2015-06-28 21:25:41 +0200 CEST [1435519541]
lvol1 2015-06-30 03:25:43 +0200 CEST [1435627543]
$ lvs vg -o name,time -S 'time since @1435519541'
LV Time
lvol0 2015-06-28 21:25:41 +0200 CEST [1435519541]
lvol1 2015-06-30 03:25:43 +0200 CEST [1435627543]
lvol3 2015-06-30 14:52:23 +0200 CEST [1435668743]
This is basic time recognition support that is directly a part of
libdevmapper. Recognition of more free-form expressions will be a
part of subsequent patches.
This patch allows for registration and recognition of reserved
values which are ranges, so they're composed of two values actually
to denote the lower and upper bound for the range (stored as an array
with exactly two items to define the boundaries).
Also, this patch allows for flagging reserved values as named-only
which means that such values are not strictly reserved. The strictly
reserved values are reserved values as used before this patch.
Distinction between strictly-reserved and named-only values
is clearly visible with comparisons. Normally, strictly reserved
value is not accounted for if we do "greater than" or "lower than"
comparisons, for example:
1 2 3 ....
|
abc
- we have "abc" as reserved value for field with value "2"
- the value reported for the field is "abc" (or "2", it doesn't matter here)
- the selection we're processing is -S 'field < abc'
- the result of the selection gives nothing as "abc" is strictly
reserved value (bound to "2") and there's no order defined for
it and it would only match if we directly compared the value
(so -S 'field = abc' would match)
With named-only values, the "abc" is named-only value for "2",
so selection -S 'field < abc" is the same as using -S 'field < 2'.
The "abc" is just an alias for some value so the value or its
assigned name can be used equally in selection criteria.
There are two basic groups of formatting flags (32 bits):
- common ones applicable for all config value types (lower 16 bits)
- type-related formatting flags (higher 16 bits)
With this patch, we initially support four new flags that
modify the the way the config value is displayed:
Common flags:
=============
DM_CONFIG_VALUE_FMT_COMMON_ARRAY - causes array config values
to be enclosed in "[ ]" even if there's only one item
(previously, there was no way to recognize an array with one
item and scalar value, hence array values with one member
were always displayed without "[ ]" which libdm accepted
when reading, but it may have been misleading for users)
DM_CONFIG_VALUE_FMT_COMMON_EXTRA_SPACE - causes extra spaces to
be inserted in "key = value" (or key = [ value, value, ... ] in
case of arrays), compared to "key=value" seen on output before.
This makes the output more readable for users.
Type-related flags:
===================
DM_CONFIG_VALUE_FMT_INT_OCTAL - prints integers in octal form with
"0" as a prefix (libdm's config reading code can handle this via
strtol just fine so it's properly recognized as number in octal
form already if there's "0" used as prefix)
DM_CONFIG_VALUE_FMT_STRING_NO_QUOTES - makes it possible to print
strings without enclosing " "
This patch also adds dm_config_value_set_format_flags and
dm_config_value_get_format_flags functions to set and get
these formatting flags.
There are reports of unexplained ioctl failures when using dmeventd.
An explanation might be that the wrong value of errno is being used.
Change libdevmapper to store an errno set by from dm ioctl() directly
and provide it to the caller through a new dm_task_get_errno() function.
[Replaced f9510548667754d9209b232348ccd2d806c0f1d8]
More exact clean of library exported symbols files.
Also use $(firstword) test to check for empty string
so 'make clean' has now cleaner condensed look.
Clean also created include links.
Introduce new implmentation of dm_task_get_info() function
with support for reading internal_suspend.
.
This time it is done in a 'versioned' way.
We keep the old fashion dm_task_get_info(Base) to implement
the old behavior of 1.02.95 libdm code.
libdm version 1.02.96 introduced 'macro' wrapper
dm_task_get_info_with_deferred_remove with new implementation
of dm_task_get_info() - we cannot do anything else then to
provide compatible version of this symbol.
Now in version 1.02.97 we add new versioned implementation of
dm_task_get_info(DM_1_02_97) symbol.
This has the effect that i.e. rpm build will finaly resolve proper
dependency on a new symbol - so it will be no longer possible,
to build a new binary and use old library
(rpm -q --provides will show libdevmapper.so.1.02(DM_1_02_97)(64bit))
Also the history is now tracked. If a new function is added (or
reimplemented), it needs to be placed in proper file,
so it could be exported with right versioning symbol.
File .exported_symbols.Base should and any existing older DM
should be treated as read-only after a release.
Also - only libdm has been currently enhanced with versioned .Base
file, as soon as other libs (liblvm, libdevmapper-event) needs changes
they should also get their exported symbol files - meanwhile
make.tmpl handles both cases.
Scenario:
$ vgs -o+vg_mda_copies
VG #PV #LV #SN Attr VSize VFree #VMdaCps
fedora 1 2 0 wz--n- 9.51g 0 unmanaged
vg 16 9 0 wz--n- 1.94g 1.83g 2
$ lvs -o+read_ahead vg/lvol6 vg/lvol7
LV VG Attr LSize Pool Origin Data% Rahead
lvol6 vg Vwi-a-tz-- 1.00g pool lvol5 0.00 auto
lvol7 vg Vwi---tz-k 1.00g pool lvol6 256.00k
Before this patch:
$vgs -o vg_name,vg_mda_copies -S 'vg_mda_copies < unmanaged'
VG #VMdaCps
vg 2
Problem:
Reserved values can be only used with exact match = or !=, not <,<=,>,>=.
In the example above, the "unamanaged" is internally represented as
18446744073709551615, but this should be ignored while not comparing
field directly with "unmanaged" reserved name with = or !=. Users
should not be aware of this internal mapping of the reserved value
name to its internal value and hence it doesn't make sense for such
reserved value to take place in results of <,<=,> and >=.
There's no order defined for reserved values!!! It's a special
*reserved* value that is taken out of the usual value range
of that type.
This is very similar to what we have already fixed with
2f7f6932dc, but it's the other way round
now - we're using reserved value name in selection criteria now
(in the patch 2f7f693, we had concrete value and we compared it
with the reserved value). So this patch completes patch 2f7f693.
This patch also fixes this problem:
$ lvs -o+read_ahead vg/lvol6 vg/lvol7 -S 'read_ahead > 32k'
LV VG Attr LSize Pool Origin Data% Rahead
lvol6 vg Vwi-a-tz-- 1.00g pool lvol5 0.00 auto
lvol7 vg Vwi---tz-k 1.00g pool lvol6 256.00k
Problem:
In the example above, the internal reserved value "auto" is in the
range of selection "> 32k" - it shouldn't match as well. Here the
"auto" is internally represented as MAX_DBL and of course, numerically,
MAX_DBL > 256k. But for users, the reserved value should be uncomparable
to any number so the mapping of the reserved value name to its interna
value is transparent to users. Again, there's no order defined for
reserved values and hence it should never match if using <,<=,>,>=
operators.
This is actually exactly the same problem as already described in
2f7f6932dc, but that patch failed for
size field types because of incorrect internal representation used.
With this patch applied, both problematic scenarios mentioned
above are fixed now:
$ vgs -o vg_name,vg_mda_copies -S 'vg_mda_copies < unmanaged'
(blank)
$ lvs -o+read_ahead vg/lvol6 vg/lvol7 -S 'read_ahead > 32k'
LV VG Attr LSize Pool Origin Rahead
lvol7 vg Vwi---tz-k 1.00g pool lvol6 256.00k
Dop unused value assignments.
Unknown is detected via other combination
(!linear && !striped).
Also change the log_error() message into a warning,
since the function is not really returning error,
but still keep the INTERNAL_ERROR.
Ret value is always set later.
The new dm_report_object_is_selected fn makes it possible to opt whether the
object reported should be displayed on output or not. Also, in addition to
that, it makes it possible to save the result of selection (either 0 or 1).
So dm_report_object_is_selected is simply more general form of object
reporting fn - combinations now allow for:
dm_report_object_is_selected(rh, object, 1, NULL):
This is exactly the original dm_report_object fn and it's fully equal
to it.
dm_report_object_is_selected(rh, object, 0, selected):
Do not display the result on output, but save info whether the object
is selected or not in 'selected' variable.
dm_report_object_is_selected(rh, object, 1, selected):
Display the result on output (if it passes selection criteria) and save
whether the object is selected or not in 'selected' variable.
dm_report_object(rh, object, 0, NULL):
This combination is not allowed - it will end up with internal error.
We're either interested in selection status or we want to display the
result on output or both, but never nothing of the two.
Support error_if_no_space feature for thin pools.
Report more info about thinpool status:
(out_of_data (D), metadata_read_only (M), failed (F) also as health
attribute.)
API for seg reporting is breaking internal lvm coding - it cannot
use vgmem mem pool for allocation of reported value.
So use separate pool instead of 'vgmem' for non vg related allocations
Add consts for many function params - but still many other are left
for now as non-const - needs deeper level of change even on libdm side.
We only checked global per-report-type reserved values for compatibility
with selection code. This patch also adds a check for per-report-field
reserved values. This avoids problems where unsupported report type is
used as reserved value which could cause hard to debug problems
otherwise. So this additional check stops from registering unsupported
and unhandled per-field reserved values.
Registerting such unsupported reserved value is a programmatic error,
so report internal error in this case to stop us from making a mistake
here in the future or even today where STR_LIST fields can't have
reserved values yet.
Under certain circumstances, the selection code can segfault:
$ vgs --select 'pv_name=~/dev/sda' --unbuffered vg0
VG #PV #LV #SN Attr VSize VFree
vg0 6 3 0 wz--n- 744.00m 588.00m
Segmentation fault (core dumped)
The problem here is the use of --ubuffered together with regex used in
selection criteria. If the report output is not buffered, each row is
discarded as soon as it is reported. The bug is in the use of report
handle's memory - in the example above, what happens is:
1) report handle is initialized together with its memory pool
2) selection tree is initialized from selection criteria string
(using the report handle's memory pool!)
2a) this also means the regex is initialized from report handle's mem pool
3) the object (row) is reported
3a) any memory needed for output is intialized out of report handle's mem pool
3b) selection criteria matching is executed - if the regex is checked the
very first time (for the very first row reported), some more memory
allocation happens as regex allocates internal structures "on-demand",
it's allocating from report handle's mem pool (see also step 2a)
4) the report output is executed
5) the object (row) is discarded, meaning discarding all the mem pool
memory used since step 3.
Now, with step 5) we have discarded the regex internal structures from step 3b.
When we execute reporting for another object (row), we're using the same
selection criteria (step 3b), but tihs is second time we're using the regex
and as such, it's already initialized completely. But the regex is missing the
internal structures now as they got discarded in step 5) from previous
object (row) reporting (because we're using "unbuffered" reporting).
To resolve this issue and to prevent any similar future issues where each
object/row memory is discarded after output (the unbuffered reporting) while
selection tree is global for all the object/rows, use separate memory pool
for report's selection.
This patch replaces "struct selection_node *selection_root" in struct
dm_report with new struct selection which contains both "selection_root"
and "mem" for separate mem pool used for selection.
We can change struct dm_report this way as it is not exposed via libdevmapper.
(This patch will have even more meaning for upcoming patches where selection
is used even for non-reporting commands where "internal" reporting and
selection criteria matching happens and where the internal reporting is
not buffered.)
