IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Failure on pipe kills lv command and produces memory stacktrace.
Add 'true' for empty grep/sed to avoid generating stacktrace.
This should help with long time (7min) for this test on Lenny testing maching
(mimage was filler with stacktrace and each word was used as LV name).
This lvconvert is now able to complete operation automatically without question.
So remove 'echo y |' - it's breaking pipe on some bash versions.
i.e.:
+ echo y
./t-lvconvert-mirror-basic.sh: line 104: echo: write error: Broken pipe
while command has completed this operation succesfully
Currently the test are not properly working with new code.
Use settings for the previous behaviour.
FIXME: update tests to properly test new allocation policies.
Add a small fix that preserves pe_start for lvm1 PVs when being converted.
(this fix needs to be replaced with something more clever, but let's have this working now)
Add configurable option to define minimal size of
of block device usable as a PV.
pv_min_size() is added to lvm-globals and it's being
initialized through _process_config.
Macro PV_MIN_SIZE is unused and removed.
New define DEFAULT_PV_MIN_SIZE_KB is added to lvm-global
and unlike PV_MIN_SIZE it uses KB units.
Should help users with various slow devices attached to the system,
which cannot be easily filtered out (like FDD on /dev/sdX):
https://bugzilla.redhat.com/show_bug.cgi?id=644578
Instead of implicitly syncing udev operation in clustered and
file locking code - call synchronization directly in lock_vol() when
the operation unlocks VG
The problem is missing implicit fs_unlock() in the no_locking code.
This is used with --sysinit on read-only filesystem locking dir.
In this case vgchange -ay could exit before all udev nodes are properly
synchronised and may cause problems with accessing such node right after
vgchange --sysinint command is finished.
Add test case for vgchange --sysinit.
As the option 'set -e -o pipefail' is very sensite on pipe breaking
stop using '-q' for grep commands.
Otherwise this command (with large enough table) would fail:
dmsetup table | egrep -q
with exit code 141 (128 + SIGPIPE)
As Peter suggested, he prefers to keep '-o pipefail' - so make sure all
piped commands will read the whole output and will not exit too early.
Instead of checking $LOCAL_CLVMD set during some 'aux' execution which
doesn't seem to be propagated to this shell - check for existance of pid
file of clvmd process - so this test is skipped in singlenode cluster test.
Harness seems to be able to busyloop in while cycle and not moving forward
for certain buffer - so check whethere there was some progress.
This fix allows to continue after failed cluster test.
Fix gcc warning for hiding global variable 's' -> sig.
- somewhat neater, more consistent and more readable output
- possible to set any lvm.conf value: aux lvmconf "section/key = value"
- LVM_TEST_NODEBUG to suppress the (lengthy) "## DEBUG" output
- back-substitution on test output ($TESTDIR/$PREFIX -> @TESTDIR@/@PREFIX@)
- support code moved from test/ to test/lib/ --> less clutter
to lvm.conf in the activation section: 'snapshot_autoextend_threshold' and
'snapshot_autoextend_percent', that define how to handle automatic snapshot
extension. The former defines when the snapshot should be extended: when its
space usage exceeds this many percent. The latter defines how much extra space
should be allocated for the snapshot, in percent of its current size.
Current lvm1 allocation code seems to not properly
map segments on missing PVs.
For now disable this functionality.
(It never worked and previous commit just introduced segfault here.)
So the partial mode in lvm1 can only process missing PVs
with no LV segments only.
Also do not use random PV UUID for missing part but use fixed
string derived from VG UUID (to not confuse clvmd tests).
If some lvm1 device is missing, lvm fails on all operations
# vgcfgbackup -f bck -P vg_test
Partial mode. Incomplete volume groups will be activated read-only.
3 PV(s) found for VG vg_test: expected 4
PV segment VG free_count mismatch: 152599 != 228909
PV segment VG extent_count mismatch: 152600 != 228910
Internal error: PV segments corrupted in vg_test.
Volume group "vg_test" not found
Allow loading of lvm1 partial VG by allocating "new" missing PV,
which covers lost space. Also this fake mising PV inform code
that it is partial VG.
https://bugzilla.redhat.com/show_bug.cgi?id=501390
For now force it in lvm.conf (otherwise it fails on older systems like RHEL5
where are these options disabled by default).
FIXME: it should test and detect both versions.
detected alignment.
NOTE: lvm2 doesn't detect MD 1.2 metadata (now the default on RHEL6) so
for now I'm forcing 1.0 metadata. This was needed to be able to reuse
the existing loop devices but recreate the md device with different
raid0 striping.
The new standard in the storage industry is to default alignment of data
areas to 1MB. fdisk, parted, and mdadm have all been updated to this
default.
Update LVM to align the PV's data area start (pe_start) to 1MB. This
provides a more useful default than the previous default of 64K (which
generally ended up being a 192K pe_start once the first metadata area
was created).
Before this patch:
# pvs -o name,vg_mda_size,pe_start
PV VMdaSize 1st PE
/dev/sdd 188.00k 192.00k
After this patch:
# pvs -o name,vg_mda_size,pe_start
PV VMdaSize 1st PE
/dev/sdd 1020.00k 1.00m
The heuristic for setting the default alignment for LVM data areas is:
- If the default value (1MB) is a multiple of the detected alignment
then just use the default.
- Otherwise, use the detected value.
In practice this means we'll almost always use 1MB -- that is unless:
- the alignment was explicitly specified with --dataalignment
- or MD's full stripe width, or the {minimum,optimal}_io_size exceeds
1MB
- or the specified/detected value is not a power-of-2
Introduce --norestorefile to allow user to override the new requirement.
This can also be overridden with "devices/require_restorefile_with_uuid"
in lvm.conf -- however the default is 1.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Test the auto-repair capability when we fail committing to an mda
on a new pv adding to a vg. This test should fail until we fix
the auto-repair in this case.
Now that we have both --pvmetadatacopies and --vgmetadatacopies,
we need to make sure --metadatacopies gets interpreted correctly.
For pv commands, --metadatacopies should imply --pvmetadatacopies,
and for vg commands, --vgmetadatacopies.
Note: this will change the behavior of vgcreate with --metadatacopies
to be a synonym for --vgmetadatacopies. Previously, --metadatacopies
would apply to any PVs given with vgcreate that needed an implicit
pvcreate. As a result, one small change is needed to one of the nightly
tests - t-vgcreate-usage.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
to a file using log/file, with log/overwrite set and dump this file in
STACKTRACE. The overall effect is that only the command that ran last before
the failure has been triggered will get its debug output logged. This is
similar to how we treat coredumps.
lvconvert testing is now in its own test, t-lvconvert-mirror-basic ... it
doesn't do anything fancy but it does run lvconvert through a lot of
combinations.
I have also merged the remaining t-mirror-lvconvert tests into
t-lvconvert-mirror and abolished the former. The latter will be split again
later into more thematic divisions. (The previous split was rather arbitrary,
may I even say random...)
fails, the test will carry on but will issue a warning. The harness detects
such warnings from tests and marks tests that passed with warnings with a
special status.
is active and while it is in-active.
+for i in $(seq 0 4); do
+ for j in $(seq 0 4); do
+ for k in core disk mirrored; do
+ for l in core disk mirrored; do
The testing code still needs some improvement. I'd like to add
the ability to test specifying the PVs to be added/removed during
a convert. It will also be important to test partial PV
specification during down converts (i.e. request to remove more
mirror images than we have provided PVs for).
Allow lv_remove_with_dependencies() to know the top-level LV that was
requested to be removed (otherwise it recurses and we lose context).
A merging snapshot cannot be removed directly but the associated origin
can be. Disallow removal of a merging snapshot unless the associated
origin is also being removed.
1) Test that the primary mirror image cannot be removed while
the mirror set is sync'ing.
2) Test that you cannot start a second mirror up-convert while
one is already in progress.
The trouble is that if the sync/conversion finishes before the
tests occur, the tests will fail by why of success where there
should have been failure. This means the sync/conversion must
happen very quickly, but this is possible because the test
mirrors we are creating are so small.
In order to decrease the likelyhood of these test failing (or
more correctly, failing to test the right thing), I've increase
the size of the mirrors. It will still be remotely possible that
the tests will fail (by way of failing to test the right thing).
If this continues to happen, more involved mechanisms will need
to be put in place. (Perhaps these will still be created, but
this change should be a remedy until that time.)
