IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We need to use "--verifyudev" for dmsetup mangle command used in
the name-mangling test since without the --verifyudev, we'd end up
with the failed rename.
Also, add direct check for the dev nodes - node with old name must
be gone and node with new name must be present. Before, we checked
just the output of the command.
One bug popped up here when renaming with udev and libdevmapper
fallback checking the udev when target mangle mode is "none"
(fixme added in the libdevmapper's node rename code).
Use separate files for raid1, raid456, raid10.
They need different target versions to work, so support
more precise test selection.
Optimize duplicate tests of target avalability and skip
unsupported test cases sooner.
In cases where PV appears on a new device without disappearing from an old one
first, the device->pvid pointers could become ambiguous. This could cause the
ambiguous PV to be lost from the cache when a different PV comes up on one of
the ambiguous devices.
This is probably not optimal, but makes the lvmetad case mimic non-lvmetad code
more closely. It also fixes vgremove of a partially corrupt VG with lvmetad, as
_vg_write_raw (and consequently, entire vg_write) currently panics when it
encounters a corrupt MDA. Ideally, we'd be able to explicitly control when it is
safe to ignore them.
%FREE allocation has been broken for RAID. At 100%FREE, there is
still an extent left for certain tests. For now, change the test
to warn rather than completely fail.
Condition was swapped - however since it's been based on 'random'
memory content it's been missed as attribute has not been set.
So now we have quite a few possible results when testing.
We have old status without separate metadata and
we have kernels with fixed snapshot leak bug.
(in-release update)
Code uses target driver version for better estimation of
max size of COW device for snapshot.
The bug can be tested with this script:
VG=vg1
lvremove -f $VG/origin
set -e
lvcreate -L 2143289344b -n origin $VG
lvcreate -n snap -c 8k -L 2304M -s $VG/origin
dd if=/dev/zero of=/dev/$VG/snap bs=1M count=2044 oflag=direct
The bug happens when these two conditions are met
* origin size is divisible by (chunk_size/16) - so that the last
metadata area is filled completely
* the miscalculated snapshot metadata size is divisible by extent size -
so that there is no padding to extent boundary which would otherwise
save us
Signed-off-by:Mikulas Patocka <mpatocka@redhat.com>
While stripe size is twice the physical extent size,
the original code will not reduce stripe size to maximum
(physical extent size).
Signed-off-by: Zhiqing Zhang <zhangzq.fnst@cn.fujitsu.com>
Switch to use ext2 to make it usable on older systems.
Previous test has not been able to catching problem.
Multiple tests are now put in.
FIXME: validate what is doing kernel target when
the header is undeleted and same chunk size is used.
It seems snapshot target successfully resumes and
just complains COW is not big enough:
kernel: dm-8: rw=0, want=40, limit=24
kernel: attempt to access beyond end of device
When chunk size is different it fails instantly.
For checking this with lvm2 and this test case use this patch:
--- a/tools/lvcreate.c
+++ b/tools/lvcreate.c
@@ -769,7 +769,7 @@ static int _read_activation_params(struct
lvcreate_params *lp,
lp->permission = arg_uint_value(cmd, permission_ARG,
LVM_READ | LVM_WRITE);
- if (lp->snapshot) {
+ if (0 && lp->snapshot) {
/* Snapshot has to zero COW header */
lp->zero = 1;
lp->wipe_signatures = 0;
---
and switch to use -c 4 for both snapshots
When read-only snapshot was created, tool was skipping header
initialization of cow device. If it happened device has been
already containing header from some previous snapshot, it's
been 'reused' for a newly created snapshot instead of being cleared.
Skip over LVs that have a cache LV in their tree of LV dependencies
when performing a pvmove.
This means that users cannot move a cache pool or a cache LV's origin -
even when that cache LV is used as part of another LV (e.g. a thin pool).
The new test (pvmove-cache-segtypes.sh) currently builds up various LV
stacks that incorporate cache LVs. pvmove tests are then performed to
ensure that cache related LVs are /not/ moved. Once pvmove is enabled
for cache, those tests will switch to ensuring that the LVs /are/
moved.
Test currently fails with make check_cluster - so uses 'should'
CLVMD[4f435880]: Feb 19 23:27:36 Send local reply
format_text/archiver.c:230 WARNING: This metadata update is NOT backed up
metadata/mirror.c:1105 Failed to initialize log device
metadata/mirror.c:1145 <backtrace>
lvconvert.c:1547 <backtrace>
lvconvert.c:3084 <backtrace>
Remove 'skip' argument passed into the function.
We always used '0' - as this is the only supported
option (-K) and there is no complementary option.
Also add some testing for behaviour of skipping.
There are typically 2 functions for the more advanced segment types that
deal with parameters in lvcreate.c: _get_*_params() and _check_*_params().
(Not all segment types name their functions according to this scheme.)
The former function is responsible for reading parameters before the VG
has been read. The latter is for sanity checking and possibly setting
parameters after the VG has been read.
This patch adds a _check_raid_parameters() function that will determine
if the user has specified 'stripe' or 'mirror' parameters. If not, the
proper number is computed from the list of PVs the user has supplied or
the number that are available in the VG. Now that _check_raid_parameters()
is available, we move the check for proper number of stripes from
_get_* to _check_*.
This gives the user the ability to create RAID LVs as follows:
# 5-device RAID5, 4-data, 1-parity (i.e. implicit '-i 4')
~> lvcreate --type raid5 -L 100G -n lv vg /dev/sd[abcde]1
# 5-device RAID6, 3-data, 2-parity (i.e. implicit '-i 3')
~> lvcreate --type raid6 -L 100G -n lv vg /dev/sd[abcde]1
# If 5 PVs in VG, 4-data, 1-parity RAID5
~> lvcreate --type raid5 -L 100G -n lv vg
Considerations:
This patch only affects RAID. It might also be useful to apply this to
the 'stripe' segment type. LVM RAID may include RAID0 at some point in
the future and the implicit stripes would apply there. It would be odd
to have RAID0 be able to auto-determine the stripe count while 'stripe'
could not.
The only draw-back of this patch that I can see is that there might be
less error checking. Rather than informing the user that they forgot
to supply an argument (e.g. '-i'), the value would be computed and it
may differ from what the user actually wanted. I don't see this as a
problem, because the user can check the device count after creation
and remove the LV if they have made an error.
