IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There was a bug in value and their synonym definition for these two fields
causing selections on these fields to not work correctly - nothing matched
against vg/lv_permissions fields even if selection criteria should have
matched.
Scenario:
$ lvs -o name,lv_permissions vg
LV LPerms
lvol0 read-only
lvol1 writeable
Before this patch:
$ lvs -o name,lv_permissions vg -S 'permissions=read-only'
(blank)
$ lvs -o name,lv_permissions vg -S 'permissions=writeable
(blank)
With this patch applied:
$ lvs -o name,lv_permissions vg -S 'permissions=read-only'
LV LPerms
lvol0 read-only
$ lvs -o name,lv_permissions vg -S 'permissions=writeable'
LV LPerms
lvol1 writeable
Also synonyms match correctly now:
$ lvs -o name,lv_permissions vg -S 'permissions=rw'
LV LPerms
lvol1 writeable
Process PVs by iterating through VGs, then iterating through
devices if the command needs to process non-PV devices.
The process_single function can always use the VG and PV args.
[Committed by agk with cosmetic changes and tweaks.]
The cache mode of a new cache pool is always explicitly
included in the vg metadata. If a cache mode is not
specified on the command line, the cache mode is taken
from lvm.conf allocation/cache_pool_cachemode, which
defaults to "writethrough".
The cache mode can be displayed with lvs -o+cachemode.
Try to enforce consistent macro usage along these lines:
lv_is_mirror - mirror that uses the original dm-raid1 implementation
(segment type "mirror")
lv_is_mirror_type - also includes internal mirror image and log LVs
lv_is_raid - raid volume that uses the new dm-raid implementation
(segment type "raid")
lv_is_raid_type - also includes internal raid image / log / metadata LVs
lv_is_mirrored - LV is mirrored using either kernel implementation
(excludes non-mirror modes like raid5 etc.)
lv_is_pvmove - internal pvmove volume
Use lv_is_* macros throughout the code base, introducing
lv_is_pvmove, lv_is_locked, lv_is_converting and lv_is_merging.
lv_is_mirror_type no longer includes pvmove.
This makes it a bit more readable since we can report more general
layouts/roles first and keywords describing the LV more precisely
afterwards in the list.
The 'lv_type' field name was a bit misleading. Better one is 'lv_role'
since this fields describes what's the actual use of the LV currently -
its 'role'.
The lv_layout and lv_type fields together help with LV identification.
We can do basic identification using the lv_attr field which provides
very condensed view. In contrast to that, the new lv_layout and lv_type
fields provide more detialed information on exact layout and type used
for LVs.
For top-level LVs which are pure types not combined with any
other LV types, the lv_layout value is equal to lv_type value.
For non-top-level LVs which may be combined with other types,
the lv_layout describes the underlying layout used, while the
lv_type describes the use/type/usage of the LV.
These two new fields are both string lists so selection (-S/--select)
criteria can be defined using the list operators easily:
[] for strict matching
{} for subset matching.
For example, let's consider this:
$ lvs -a -o name,vg_name,lv_attr,layout,type
LV VG Attr Layout Type
[lvol1_pmspare] vg ewi------- linear metadata,pool,spare
pool vg twi-a-tz-- pool,thin pool,thin
[pool_tdata] vg rwi-aor--- level10,raid data,pool,thin
[pool_tdata_rimage_0] vg iwi-aor--- linear image,raid
[pool_tdata_rimage_1] vg iwi-aor--- linear image,raid
[pool_tdata_rimage_2] vg iwi-aor--- linear image,raid
[pool_tdata_rimage_3] vg iwi-aor--- linear image,raid
[pool_tdata_rmeta_0] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_1] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_2] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_3] vg ewi-aor--- linear metadata,raid
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
[pool_tmeta_rimage_0] vg iwi-aor--- linear image,raid
[pool_tmeta_rimage_1] vg iwi-aor--- linear image,raid
[pool_tmeta_rmeta_0] vg ewi-aor--- linear metadata,raid
[pool_tmeta_rmeta_1] vg ewi-aor--- linear metadata,raid
thin_snap1 vg Vwi---tz-k thin snapshot,thin
thin_snap2 vg Vwi---tz-k thin snapshot,thin
thin_vol1 vg Vwi-a-tz-- thin thin
thin_vol2 vg Vwi-a-tz-- thin multiple,origin,thin
Which is a situation with thin pool, thin volumes and thin snapshots.
We can see internal 'pool_tdata' volume that makes up thin pool has
actually a level10 raid layout and the internal 'pool_tmeta' has
level1 raid layout. Also, we can see that 'thin_snap1' and 'thin_snap2'
are both thin snapshots while 'thin_vol1' is thin origin (having
multiple snapshots).
Such reporting scheme provides much better base for selection criteria
in addition to providing more detailed information, for example:
$ lvs -a -o name,vg_name,lv_attr,layout,type -S 'type=metadata'
LV VG Attr Layout Type
[lvol1_pmspare] vg ewi------- linear metadata,pool,spare
[pool_tdata_rmeta_0] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_1] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_2] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_3] vg ewi-aor--- linear metadata,raid
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
[pool_tmeta_rmeta_0] vg ewi-aor--- linear metadata,raid
[pool_tmeta_rmeta_1] vg ewi-aor--- linear metadata,raid
(selected all LVs which are related to metadata of any type)
lvs -a -o name,vg_name,lv_attr,layout,type -S 'type={metadata,thin}'
LV VG Attr Layout Type
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
(selected all LVs which hold metadata related to thin)
lvs -a -o name,vg_name,lv_attr,layout,type -S 'type={thin,snapshot}'
LV VG Attr Layout Type
thin_snap1 vg Vwi---tz-k thin snapshot,thin
thin_snap2 vg Vwi---tz-k thin snapshot,thin
(selected all LVs which are thin snapshots)
lvs -a -o name,vg_name,lv_attr,layout,type -S 'layout=raid'
LV VG Attr Layout Type
[pool_tdata] vg rwi-aor--- level10,raid data,pool,thin
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
(selected all LVs with raid layout, any raid layout)
lvs -a -o name,vg_name,lv_attr,layout,type -S 'layout={raid,level1}'
LV VG Attr Layout Type
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
(selected all LVs with raid level1 layout exactly)
And so on...
Before the patch:
$ lvs -o name,active vg/lvol1 --driverloaded n
WARNING: Activation disabled. No device-mapper interaction will beattempted.
LV Active
lvol1 active
With this patch applied:
$ lvs -o name,active vg/lvol1 --driverloaded n
WARNING: Activation disabled. No device-mapper interaction will be attempted.
LV Active
lvol1 unknown
The same for active_{locally,remotely,exclusively} fields.
Also, rename headings for these fields (ActLocal/ActRemote/ActExcl).
If the lv_info call fails for whatever reason/INFO dm ioctl fails or
the dm driver communication is disabled (--driverloaded n), make
sure we always display "unknown" for LVSINFO fields as that's exactly
what happens - we don't know the state.
Before the patch:
$ lvs -o name,device_open --driverloaded n
WARNING: Activation disabled. No device-mapper interaction will be attempted.
Command failed with status code 5.
With this patch applied:
$ lvs -o name,device_open --driverloaded n
WARNING: Activation disabled. No device-mapper interaction will be attempted.
LV DevOpen
lvol1 unknown
Like other binary fields we already have:
$ lvs -o name,zero vg/lvx vg/pool vg/pool1
LV Zero
lvx unknown
pool
pool1 zero
$ lvs -o name,zero vg/lvx vg/pool vg/pool1 --binary
LV Zero
lvx -1
pool 0
pool1 1
We have 1/"descriptive word"/"yes" for 1 and 0/"no" for 0.
For example (the new recognized values are "yes" and "no"):
$ lvs -o name,device_open fedora vg/lvol1 vg/lvol2
LV DevOpen
root open
swap open
lvol1 open
lvol2
$ lvs -o name,device_open fedora vg/lvol1 vg/lvol2 -S 'device_open=open'
LV DevOpen
root open
swap open
lvol1 open
$ lvs -o name,device_open fedora vg/lvol1 vg/lvol2 -S 'device_open=1'
LV DevOpen
root open
swap open
lvol1 open
$ lvs -o name,device_open fedora vg/lvol1 vg/lvol2 -S 'device_open=yes'
LV DevOpen
root open
swap open
lvol1 open
$ lvs -o name,device_open fedora vg/lvol1 vg/lvol2 -S 'device_open=0'
LV DevOpen
lvol2
$ lvs -o name,device_open fedora vg/lvol1 vg/lvol2 -S 'device_open=no'
LV DevOpen
lvol2
So all attribute reporting functions are all in one section of code
for quick orientation (all these functions are defined in the order
of their attribute character displayed in pv/vg/lv_attr field).
lv_active_{locally,remotely,exclusively} display the original
"lv_active" field in a more separate way so that we can create
selection criteria in a binary-based form (yes/no).
The macros for reserved value definition makes the process a bit easier,
but there's still a place for improvement and make this even more
transparent. We can optimize and provide better automatism here later on.
Also respect --binary arg and/or report/binary_values_as_numeric
when displaying unknown values. If textual form is used, use "unknown",
if numeric value is used, use "-1" (which we already use to denote
unknown numeric values in other reports like lv_kernel_major and
lv_kernel_minor).
All binary attr fields have synonyms so selection criteria can use
either 0/1 or words to match against the field value (base type
for these binary fields is numeric one - DM_REPORT_FIELD_TYPE_NUMBER
so words are registered as reserved values):
pv_allocatable - "allocatable"
pv_exported - "exported"
pv_missing - "missing"
vg_extendable - "extendable"
vg_exported - "exported"
vg_partial - "partial"
vg_clustered - "clustered"
lv_initial_image_sync - "initial image sync", "sync"
lv_image_synced_names - "image synced", "synced"
lv_merging_names - "merging"
lv_converting_names - "converting"
lv_allocation_locked - "allocation locked", "locked"
lv_fixed_minor - "fixed minor", "fixed"
lv_merge_failed - "merge failed", "failed"
For example, these three are all equivalent:
$ lvs -o name,fixed_minor -S 'fixed_minor=fixed'
LV FixMin
lvol8 fixed minor
$ lvs -o name,fixed_minor -S 'fixed_minor="fixed minor"'
LV FixMin
lvol8 fixed minor
$ lvs -o name,fixed_minor -S 'fixed_minor=1'
LV FixMin
lvol8 fixed minor
The same with binary output - it has no effect on this functionality:
$ lvs -o name,fixed_minor --binary -S 'fixed_minor=fixed'
LV FixMin
lvol8 1
$ lvs -o name,fixed_minor --binary -S 'fixed_minor="fixed
minor"'
LV FixMin
lvol8 1
[1] f20/~ # lvs -o name,fixed_minor --binary -S 'fixed_minor=1'
LV FixMin
lvol8 1
The --binary option, if used, causes all the binary values reported
in reporting commands to be displayed as "0" or "1" instead of descriptive
literal values (value "unknown" is still used for values that could not be
determined).
Also, add report/binary_values_as_numeric lvm.conf option with the same
functionality as the --binary option (the --binary option prevails
if both --binary cmd option and report/binary_values_as_numeric lvm.conf
option is used at the same time). The report/binary_values_as_numeric is
also profilable.
This makes it easier to use and check lvm reporting command output in scripts.
Physical Volume Fields:
pv_allocatable - Whether this device can be used for allocation.
pv_exported - Whether this device is exported.
pv_missing - Whether this device is missing in system.
Volume Group Fields:
vg_permissions - VG permissions.
vg_extendable - Whether VG is extendable.
vg_exported - Whether VG is exported.
vg_partial - Whether VG is partial.
vg_allocation_policy - VG allocation policy.
vg_clustered - Whether VG is clustered.
Logical Volume Fields:
lv_volume_type - LV volume type.
lv_initial_image_sync - Whether mirror/RAID images underwent initial resynchronization.
lv_image_synced - Whether mirror/RAID image is synchronized.
lv_merging - Whether snapshot LV is being merged to origin.
lv_converting - Whether LV is being converted.
lv_allocation_policy - LV allocation policy.
lv_allocation_locked - Whether LV is locked against allocation changes.
lv_fixed_minor - Whether LV has fixed minor number assigned.
lv_merge_failed - Whether snapshot merge failed.
lv_snapshot_invalid - Whether snapshot LV is invalid.
lv_target_type - Kernel target type the LV is related to.
lv_health_status - LV health status.
lv_skip_activation - Whether LV is skipped on activation.
Logical Volume Info Fields
lv_permissions - LV permissions.
lv_suspended - Whether LV is suspended.
lv_live_table - Whether LV has live table present.
lv_inactive_table - Whether LV has inactive table present.
lv_device_open - Whether LV device is open.
LVSINFO is exactly the same as existing LVS report type,
but it has the "struct lvinfo" populated in addition for
use - this is useful for fields that display the status
of the LV device itself (e.g. suspended state, tables
present/missing...).
Currently, such properties are reported within the "lv_attr"
field so separation is unnecessary - the "lvinfo" call
to populate the "struct lvinfo" is directly a part of the
field reporting function - _lvstatus_disp/lv_attr_dup.
With upcoming patches, we'd like the lv_attr field bits
to be separated into their own fields. To avoid calling
"lvinfo" fn as many times as there are fields requiring
the "lv_info" structure to be populated while reporting
one row related to one LV, we're separating former LVS
into LVS and LVSINFO report type. With this, there's
just one "lvinfo" call for one report row and LV reporting
fields will take the info needed from this struct then,
hence reusing it and not calling "lvinfo" fn on their own.
Make dm_report_init_with_selection to accept an argument with an
array of reserved values where each element contains a triple:
{dm report field type, reserved value, array of strings representing this value}
When the selection is parsed, we always check whether a string
representation of some reserved value is not hit and if it is,
we use the reserved value assigned for this string instead of
trying to parse it as a value of certain field type.
This makes it possible to define selections like:
... --select lv_major=undefined (or -1 or unknown or undef or whatever string representations are registered for this reserved value in the future)
... --select lv_read_ahead=auto
... --select vg_mda_copies=unmanaged
With this, each time the field value of certain type is hit
and when we compare it with the selection, we use the proper
value for comparison.
For now, register these reserved values that are used at the moment
(also more descriptive names are used for the values):
const uint64_t _reserved_number_undef_64 = UINT64_MAX;
const uint64_t _reserved_number_unmanaged_64 = UINT64_MAX - 1;
const uint64_t _reserved_size_auto_64 = UINT64_MAX;
{
{DM_REPORT_FIELD_TYPE_NUMBER, _reserved_number_undef_64, {"-1", "undefined", "undef", "unknown", NULL}},
{DM_REPORT_FIELD_TYPE_NUMBER, _reserved_number_unmanaged_64, {"unmanaged", NULL}},
{DM_REPORT_FIELD_TYPE_SIZE, _reserved_size_auto_64, {"auto", NULL}},
NULL
}
Same reserved value of different field types do not collide.
All arrays are null-terminated.
The list of reserved values is automatically displayed within
selection help output:
Selection operands
------------------
...
Reserved values
---------------
-1, undefined, undef, unknown - Reserved value for undefined numeric value. [number]
unmanaged - Reserved value for unmanaged number of metadata copies in VG. [number]
auto - Reserved value for size that is automatically calculated. [size]
Selection operators
-------------------
...
The {pv,vg,lv,seg}_tags and lv_modules fields are reported as string
lists using the new dm_report_field_string_list - so we just pass
the list to the fn that takes care of reporting and item sorting itself.
This makes it easier to check against the fields (following patches for
report selection) and check whether size units are allowed or not
with the field value.
Internal reporting function cannot handle NULL reporting value,
so ensure there is at least dummy label.
So move dummy_lable from tools/reporter.c and use it for all
report_object() calls in lib/report/report.c.
(Fixes RHBZ 1108394)
Simlify lvm_report_object initialization.
Several fields used to display 0 if undefined. Recent changes
to the way the fields are reported threw away some tests for
valid pointers, leading to segfaults with 'pvs -o all'.
Reinstate the original behaviour.
