1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

375 Commits

Author SHA1 Message Date
David Teigland
1365f0d4c8 remove unneded check to skip filter init
There's no more persistent filter so we don't need
to check for it.
2018-09-12 16:30:50 -05:00
David Teigland
0aeca60aaa fix readonly activation override options
This fixes a problem in commit e6bb780d24, in which the
back compat handling for the old locking_type=4 was
incorrectly translated to mean the same thing as --readonly,
which prevented activation because activation uses an
exclusive vg lock.  Previously, locking_type=4 allowed
activation.

If we see locking_type 4 in an old config, translate it to
the new combination of --readonly and --sysinit, which we
now define to mean the --readonly behavior with an exception
to allow activation.
2018-09-12 16:30:50 -05:00
David Teigland
8a66c81b9b lvconvert: restrict command matching for no option variant
The 'lvconvert LV' command def has caused multiple problems
for command matching because it matches the required options
of any lvconvert command.  Any lvconvert with incorrect options
ends up matching 'lvconvert LV', which then produces an error
about incorrect options being used for 'lvconvert LV'.  This
prevents suggestions from nearest-command partial command matches.

Add a special case for 'lvconvert LV' so that it won't be used
as a partial match for a command that has options specified.
2018-07-23 11:12:38 -05:00
David Teigland
117160b27e Remove lvmetad
Native disk scanning is now both reduced and
async/parallel, which makes it comparable in
performance (and often faster) when compared
to lvm using lvmetad.

Autoactivation now uses local temp files to record
online PVs, and no longer requires lvmetad.

There should be no apparent command-level change
in behavior.
2018-07-11 11:26:42 -05:00
Zdenek Kabelac
7b8aa4af57 lvconvert: support to convert lv into vdopool
Support:

lvconvert --type vdo-pool  vg/lv

lvconvert --vdopool  vg/lv   --virtualsize 10G
2018-07-09 15:29:16 +02:00
David Teigland
428514a07f Drop --ignoreskippedcluster option
It's no longer needed.  Clustered VGs are now handled in
the same way as foreign VGs, and as shared VGs that
can't be accessed:

- A command processing all VGs sees a clustered VG,
  prints a message ("Skipping clustered VG foo."),
  skips it, and does not fail.

- A command where the clustered VG is explicitly
  named on the command line, prints a message and fails.
  "Cannot access clustered VG foo, see lvmlockd(8)."

The option is listed in the set of ignored options for
the commands that previously accepted it.  (Removing it
entirely would cause commands/scripts to fail if they
set it.)
2018-06-15 15:59:34 -05:00
David Teigland
e6bb780d24 Rework lock-override options and locking_type settings
The last commit related to this was incomplete:
  "Implement lock-override options without locking type"

This is further reworking and reduction of the locking.[ch]
layer which handled all clustering, but is now only used
for file locking.  The "locking types" that this layer
implemented were removed previously, leaving only the
standard file locking.  (Some cluster-related artifacts
remain to be cleared out later.)

Command options to override or modify locking behavior
are reimplemented here without using the locking types.
Also, deprecated locking_type values are recognized,
and implemented as if one of the equivalent override
options was set.

Options that override file locking are:

. --nolocking disables all file locking.

. --readonly grants read lock requests without actually
  taking a file lock, and refuses write lock requests.

. --ignorelockingfailure tries to set up file locks and
  uses them normally if possible.  When not possible, it
  behaves like --readonly, but allows activation.

. --sysinit is the same as ignorelockingfailure.

. global/metadata_read_only acquires actual read file
  locks, and refuses write lock requests.

(Some of these options could probably be deprecated
because they were added as workarounds to various
locking_type behaviors that are now deprecated.)

The locking_type setting now has one valid value: 1 which
refers to standard file locking.  Configs that contain
deprecated values are recognized and still work in
largely the same way:

. 0 disabled all locking, now implemented like --nolocking
  is set.  Allow the nolocking option in all commands.

. 1 is the normal file locking setting and is unchanged.

. 2 was for external locking which was not used, and
  reverts to normal file locking.

. 3 was for cluster/clvm.  This reverts to normal file
  locking, and prints messages about lvmlockd.

. 4 was equivalent to readonly, now implemented like
  --readonly is set.

. 5 disabled all locking, now implemented like
  --nolocking is set.
2018-06-07 16:47:15 -05:00
David Teigland
6e6ef95ba6 Implement lock-override options without locking type
The options: --nolocking, --readonly, --sysinit
override, or make exceptions to, the normal file locking
behavior.  Implement these by just checking for the
options in the file locking path instead of using
special locking types.
2018-06-07 16:17:04 +01:00
David Teigland
3e781ea446 Remove clvmd and associated code
More code reduction and simplification can follow.
2018-06-05 11:09:13 -05:00
Joe Thornber
7f97c7ea9a build: Don't generate symlinks in include/ dir
As we start refactoring the code to break dependencies (see doc/refactoring.txt),
I want us to use full paths in the includes (eg, #include "base/data-struct/list.h").
This makes it more obvious when we're breaking abstraction boundaries, eg, including a file in
metadata/ from base/
2018-05-14 10:30:20 +01:00
David Teigland
c1cd18f21e Remove lvm1 and pool disk formats
There are likely more bits of code that can be removed,
e.g. lvm1/pool-specific bits of code that were identified
using FMT flags.

The vgconvert command can likely be reduced further.

The lvm1-specific config settings should probably have
some other fields set for proper deprecation.
2018-04-30 16:55:02 -05:00
David Teigland
aee27dc7ba scan: skip device rescan in vg_read
For reporting commands (pvs,vgs,lvs,pvdisplay,vgdisplay,lvdisplay)
we do not need to repeat the label scan of devices in vg_read if
they all had matching metadata in the initial label scan.  The
data read by label scan can just be reused for the vg_read.
This cuts the amount of device i/o in half, from two reads of
each device to one.  We have to be careful to avoid repairing
the VG if we've skipped rescanning.  (The VG repair code is very
poor, and will be redone soon.)
2018-04-20 11:23:14 -05:00
David Teigland
c0973e70a5 dev_cache: clean up scan
Pull out all of the twisted logic and simply call dev_cache_scan
at the start of the command prior to label scan.
2018-04-20 11:22:48 -05:00
David Teigland
89c65d4f71 remove unnecessary REQUIRES_FULL_LABEL_SCAN
we always scan all devices
2018-04-20 11:22:48 -05:00
David Teigland
ae21305ee7 scan: drop bcache between lvm shell commands
A running lvm shell keeps all lvm devices open
unless the bcache is dropped.
2018-04-20 11:22:48 -05:00
David Teigland
d9a77e8bb4 lvmcache: simplify metadata cache
The copy of VG metadata stored in lvmcache was not being used
in general.  It pretended to be a generic VG metadata cache,
but was not being used except for clvmd activation.  There
it was used to avoid reading from disk while devices were
suspended, i.e. in resume.

This removes the code that attempted to make this look
like a generic metadata cache, and replaces with with
something narrowly targetted to what it's actually used for.

This is a way of passing the VG from suspend to resume in
clvmd.  Since in the case of clvmd one caller can't simply
pass the same VG to both suspend and resume, suspend needs
to stash the VG somewhere that resume can grab it from.
(resume doesn't want to read it from disk since devices
are suspended.)  The lvmcache vginfo struct is used as a
convenient place to stash the VG to pass it from suspend
to resume, even though it isn't related to the lvmcache
or vginfo.  These suspended_vg* vginfo fields should
not be used or touched anywhere else, they are only to
be used for passing the VG data from suspend to resume
in clvmd.  The VG data being passed between suspend and
resume is never modified, and will only exist in the
brief period between suspend and resume in clvmd.

suspend has both old (current) and new (precommitted)
copies of the VG metadata.  It stashes both of these in
the vginfo prior to suspending devices.  When vg_commit
is successful, it sets a flag in vginfo as before,
signaling the transition from old to new metadata.

resume grabs the VG stashed by suspend.  If the vg_commit
happened, it grabs the new VG, and if the vg_commit didn't
happen it grabs the old VG.  The VG is then used to resume
LVs.

This isolates clvmd-specific code and usage from the
normal lvm vg_read code, making the code simpler and
the behavior easier to verify.

Sequence of operations:

- lv_suspend() has both vg_old and vg_new
  and stashes a copy of each onto the vginfo:
  lvmcache_save_suspended_vg(vg_old);
  lvmcache_save_suspended_vg(vg_new);

- vg_commit() happens, which causes all clvmd
  instances to call lvmcache_commit_metadata(vg).
  A flag is set in the vginfo indicating the
  transition from the old to new VG:
  vginfo->suspended_vg_committed = 1;

- lv_resume() needs either vg_old or vg_new
  to use in resuming LVs.  It doesn't want to
  read the VG from disk since devices are
  suspended, so it gets the VG stashed by
  lv_suspend:
  vg = lvmcache_get_suspended_vg(vgid);

If the vg_commit did not happen, suspended_vg_committed
will not be set, and in this case, lvmcache_get_suspended_vg()
will return the old VG instead of the new VG, and it will
resume LVs based on the old metadata.
2018-04-20 11:22:45 -05:00
Zdenek Kabelac
7323557379 cleanup: add _mb_ to regiosize option
Just like with others mentions default unit in function name.
2018-04-20 12:17:01 +02:00
Zdenek Kabelac
7cfe5ab9bc partial revert "command: Skip some memory zeroing."
This partially reverts commit da37cbd24f.
As the _cmdline structure use mempool for allocated ellement
that is being release on cmd_context close.

Before the better fix is made - restore previous logic and
reinitialize cmd structures again for new cmd_context.

Problem can be hit with e.g. this test run:

make check_local T=foreign LVM_VALGRIND_DMEVENTD=1

Invalid read of size 1
   at 0x4C31C83: strcmp (vg_replace_strmem.c:846)
   by 0x6BA0939: _find_command (lvmcmdline.c:1555)
   by 0x6BA4304: lvm_run_command (lvmcmdline.c:2810)
   by 0x6BD5E02: lvm2_run (lvmcmdlib.c:91)
   by 0x685607E: dmeventd_lvm2_run (dmeventd_lvm.c:118)
   by 0x6652684: _use_policy (dmeventd_thin.c:117)
   by 0x6652E56: process_event (dmeventd_thin.c:298)
   by 0x10CC5A: _do_process_event (dmeventd.c:945)
   by 0x10CF83: _monitor_thread (dmeventd.c:1033)
   by 0x54B35E0: start_thread (in /usr/lib64/libpthread-2.26.9000.so)
   by 0x57C30EE: clone (in /usr/lib64/libc-2.26.9000.so)
 Address 0x6266270 is 4,352 bytes inside a block of size 8,192 free'd
   at 0x4C2ED68: free (vg_replace_malloc.c:530)
   by 0x5289142: dm_free_wrapper (dbg_malloc.c:393)
   by 0x528998A: _free_chunk (pool-fast.c:318)
   by 0x52892A6: dm_pool_destroy (pool-fast.c:78)
   by 0x6A8E52C: destroy_toolcontext (toolcontext.c:2254)
   by 0x6BA5BD6: lvm_fin (lvmcmdline.c:3327)
   by 0x6BD5EA7: lvm2_exit (lvmcmdlib.c:123)
   by 0x6856013: dmeventd_lvm2_exit (dmeventd_lvm.c:103)
   by 0x66535B8: unregister_device (dmeventd_thin.c:432)
   by 0x10CBBC: _do_unregister_device (dmeventd.c:926)
   by 0x10CD74: _monitor_unregister (dmeventd.c:979)
   by 0x10D094: _monitor_thread (dmeventd.c:1066)
   by 0x54B35E0: start_thread (in /usr/lib64/libpthread-2.26.9000.so)
   by 0x57C30EE: clone (in /usr/lib64/libc-2.26.9000.so)
 Block was alloc'd at
   at 0x4C2DBBB: malloc (vg_replace_malloc.c:299)
   by 0x5288F46: dm_malloc_aux (dbg_malloc.c:287)
   by 0x52890AC: dm_malloc_wrapper (dbg_malloc.c:371)
   by 0x52898E6: _new_chunk (pool-fast.c:286)
   by 0x52893BA: dm_pool_alloc_aligned (pool-fast.c:106)
   by 0x5289310: dm_pool_alloc (pool-fast.c:90)
   by 0x6A8A21A: _load_config_file (toolcontext.c:808)
   by 0x6A8A3D9: _init_lvm_conf (toolcontext.c:842)
   by 0x6A8D3BD: create_toolcontext (toolcontext.c:1941)
   by 0x6BA5B24: init_lvm (lvmcmdline.c:3308)
   by 0x6BD5B7C: cmdlib_lvm2_init (lvmcmdlib.c:34)
   by 0x6BD5EB8: lvm2_init (lvm2cmd.c:20)
   by 0x6855EA7: dmeventd_lvm2_init (dmeventd_lvm.c:67)
   by 0x665305F: register_device (dmeventd_thin.c:352)
   by 0x10CB7A: _do_register_device (dmeventd.c:916)
   by 0x10CEE4: _monitor_thread (dmeventd.c:1006)
   by 0x54B35E0: start_thread (in /usr/lib64/libpthread-2.26.9000.so)
   by 0x57C30EE: clone (in /usr/lib64/libc-2.26.9000.so)
2018-02-09 10:59:07 +01:00
Alasdair G Kergon
da37cbd24f command: Skip some memory zeroing.
commands[] is in bss, its content wouldn't change if reinitialised
and unregister has no memory to free so don't bother.
2018-01-13 03:44:15 +00:00
David Teigland
51340888aa lvmlockd: print warning when skipping locking 2018-01-09 11:46:00 -06:00
David Teigland
46cedb105b lvmlockd: add lockopt values for skipping selected locks
and add lockopt to common options.
2018-01-09 11:20:10 -06:00
Zdenek Kabelac
efa17cae24 cmdline: avoid overrun on very large numbers.
When large size number (>2^31) is given on command line it could be
misdetected and in certain cases lead to wrongly casted number.

So make sure all cases always do set _MAX number in case the value would
not fit within the supported range instead of getting some random value
within the range.

In most cases this was not a problem to detect, but i.e. stripesize
parameter might have been fooled by certain large numbers.
2017-11-27 10:34:30 +01:00
Alasdair G Kergon
6bf0f04ae2 log: Improve various device-related messages
- Use 'lvmcache' consistently instead of 'metadata cache'
- Always use 5 characters for source line number
- Remember to convert uuids into printable form
- Use <no name> rather than (null) when VG has no name.
2017-11-13 19:45:33 +00:00
Alasdair G Kergon
598fcccf45 persistent filter: Skip import before rescan
The persistent filter should not be imported by any command that doesn't
use it so take addtional note of REQUIRES_FULL_LABEL_SCAN (for vgrename)
and introduce IGNORE_PERSISTENT_FILTER for vgscan and pvscan.
2017-11-13 19:45:16 +00:00
Alasdair G Kergon
f1cc5b12fd tidy: Add missing underscores to statics. 2017-10-18 15:58:13 +01:00
Zdenek Kabelac
a65649b45d lvconvert: support repair of cache/cachepool
Extend repair for cache and cachepool target
and user 'lvconvert_repair' routine name.
2017-09-20 15:14:16 +02:00
David Teigland
955083e625 commands: recognize lvm command -?
and interpret it as lvm command -h
2017-08-09 15:06:36 -05:00
David Teigland
8bc8965847 commands: recognize -? for help
It's not known when this last worked, but there has
been documentation suggesting it worked, so enable it.
2017-08-09 09:34:33 -05:00
Alasdair G Kergon
54f5bc01b9 tools: Introduce exit code EINIT_FAILED.
Replace -1 (reported as 255) by 4.
2017-07-26 23:18:03 +01:00
David Teigland
1460cac273 vgchange: split out code for systemid
Use the command definitions to separate the implementation
of vgchange systemid from the rest of vgchange.
2017-07-24 14:12:08 -05:00
David Teigland
07cd88dcfa vgchange: split out code for lockstart and lockstop
Use the command definitions to separate the implementation
of lockstop and lockstart from the rest of vgchange.
2017-07-24 14:12:08 -05:00
David Teigland
f611b68f3c vgchange: separate change locktype and allow recovery
Add an independent command definition for "vgchange --locktype",
and split the implementation out of the set of common metadata
changes.  It is unlike normal metadata changes, and can only
be run by itself.  (Changing the lock type is similar in
principle to changing the VG name or the VG system ID; it
effects the ability of any host to see or access the VG.)

At some point this command lost the ability to forcibly change
the lock type of a shared VG to "none" (making it a local VG).
This can be necessary to repair shared VGs (e.g. recovery steps
that occur in vg_read are disabled for shared VGs because
they are not locked properly, or recovering sanlock locks
when the PV holding them is lost.)

"vgchange --locktype none --lockopt force VG" is used as the
method of forcing the shared VG to become local so that it
can be repaired.
2017-07-24 14:12:08 -05:00
Zdenek Kabelac
4fa739faf2 lvmcmdline: enhance locales check
Make check for 'radixchar' more readable and logical.
Also avoid reread of number of locale is already using '.' as radixchar.
2017-07-17 21:25:50 +02:00
Zdenek Kabelac
864017710c lvmcmdline: restore digit check
Commit 9b4b5d449e started to accept
rather way to wide set of strings we do not want to take for size.
i.e.  lvresize -t vg0/lvol0 -LNaNM

Restore check for 'digit ||  locales defined 'dot' |  '.'
(as we tend to take '.' even if locales uses ',')
2017-07-17 20:54:42 +02:00
Zdenek Kabelac
9b4b5d449e lvmcmdline: enhance acceptance of size numbers
Explictely detect duplicate sing symbols and leave the rest of
double number validation on 'strtod()' function. This way
we can also accept size like:

lvcreate -L.1M

We already accept -L0.1M - but it's common to accept numbers
starting with leading '.' - just as 'strtod()' accepts it).
2017-07-17 12:32:18 +02:00
Zdenek Kabelac
ba9820b142 numbers: strtod or strtoul need reset of errno
API for strtod() or strtoul() needs reset of errno, before it's being
called. So add missing resets in missing places and some also some
errno validation for out-of-range numbers.
2017-07-17 12:32:18 +02:00
Zdenek Kabelac
94838b4df0 lvmcmdline: validate size as double
Since we are reading size as (double) we can get way bigger
number then just plain int64. So to make this check actually
more valid and usable do a maxsize compare in 'double'.
2017-07-17 12:32:18 +02:00
Alasdair G Kergon
3cd492cd59 commands: fix lvm shell segfaults
Don't check for -h/--help if argc is 1.
2017-07-11 01:42:06 +01:00
David Teigland
56768ce36b lvm: report error if options are set before command
Previously, strange parsing errors were reported.
2017-07-10 11:02:11 -05:00
David Teigland
442d60842d lvm: run help from -h|--help 2017-07-10 11:02:11 -05:00
David Teigland
cf3a6bbbe8 commands: fix handing of ENO_SUCH_CMD in script
Fix the error messages when an unrecognized command is
run from a script.  We shouldn't attempt to parse options
for an unrecognized command name, which causes misleading
errors about bad options, but rather exit right when we
know the command name is not valid.  Also don't complain
about exiting without an error message when running a
script if no command didn't exist.
2017-07-07 15:34:27 -05:00
David Teigland
85f1814e9d commands: centralize shell vs script vs command decision
This clarifies the point where lvm decides if it is
running an lvm shell, command or a script.
2017-07-07 15:33:44 -05:00
Zdenek Kabelac
664e947726 coverity: add some error path for failed allocs
Coverity reports some unchecked allocations.
2017-06-27 00:27:36 +02:00
Zdenek Kabelac
52f4042f1a cmdline: fix missing NULL at end of array of args
lvm_run needs to place NULL as the last element into argv[].
Otherwise we get:

Conditional jump or move depends on uninitialised value(s)
 _command_required_pos_matches (lvmcmdline.c:1443)
 _find_command (lvmcmdline.c:1610)
 lvm_run_command (lvmcmdline.c:2770)
 lvm2_run (lvmcmdlib.c:91)
2017-06-26 20:07:21 +02:00
David Teigland
15eaf703fc commands: fix memory debug for cmd defs
Clean up the handling of memory used for cmd defs
so it doesn't trip up memory debugging.

Allocate memory for commands[] from libmem.

Free temporary memory used by define_commands()
at the end of the function.

Clear all the command def state in in lvm_fin().
2017-05-01 15:27:14 -05:00
David Teigland
54726a4950 fix running commands from a script file
Using any arg with a command name in a script file
would cause the command to fail.

The name of the script file being executed was being passed
to lvm_register_commands() and define_commands(), which
prevented command defs from being defined (simple commands
were still being defined only by name which was enough for those
to still work when run trivially with no args).
2017-04-28 16:51:04 -05:00
David Teigland
86b9c23dbe commands: improve syntax suggestion when no command is found
The logic for suggesting the nearest valid command syntax
was missing the simplest case.  If a command has only one
valid syntax, that is the one we should suggest.  (We were
suggesting nothing in this case.)
2017-04-27 14:21:01 -05:00
David Teigland
a3fdc966b5 commands: improve error messages for rules
Make the error messages more consistent,
and use less code-centric wording.
2017-04-25 15:49:58 -05:00
Zdenek Kabelac
3503ef23e3 cmdline: ensure command struct is defined
Make it clear to Coverity cmd will be defined.
2017-04-12 21:33:47 +02:00
David Teigland
6c342abb7f commands: improve error message for option rules
When a cmd def RULE fails because of a disallowed
combination of options, improve the error message
to show the option combination, not just the options
that broke the rule.
2017-04-12 14:05:36 -05:00