IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
If a RaidLV mapping is required to be refreshed as a result of temporarily failed
and recurred RAID leg device (pairs) caused by writes to the LV during failure,
the requirement is reported by volume health character r' in position 9 of the
LV's attribute field (see 'man lvs' about additional volume health characters).
As this character can be overlooked, this patch adds messages to the top
of the lvs command output informing the user explicitely about the fact.
pvs -A|--allpvs
Show PVs that would otherwise be excluded by the devices file.
pvscan -A|--allpvs
Show PVs that would otherwise be excluded by the devices file.
For those devices that are included by the devices file,
their device ID is displayed in place of the usual "lvm2"
format and size.
(pvs -a|--all is unchanged, and shows devices not formatted as PVs.)
Reuse existing report/headings config setting to make it possible to
change the type of headings to display:
0 - no headings
1 - column name abbreviations (default and original functionality)
2 - full column names (column names are equal to exact names that
-o|--options also accepts to set report output)
Also, add '--headings none|abbrev|full|0|1|2' command line option
so we are able to select the heading type for each LVM reporting
command directly.
If we are executing 'report_for_selection' to do an internal report
just for the selection itself (not for display), we can call it more
than once. In that case, we are reusing the same selection handle
(e.g. inside 'process_each_lv_in_vg').
The selection handle has 'report_type' field which is a union of all
report types needed for the report based on selection fields we actually
use.
The 'report_type' is further clarified based on checks and rules inside
'_get_final_report_type' which 'report_for_selection' calls. Then, this
final report type unambiguously identifies proper branch to take in
'report_all_in_{pv,vg,lv}' that is called next.
If the 'report_for_selection' is called more than once with the same
selection handle, we need to make sure that we always restore the report
type to its initial value, so all the rules inside 'report_for_selection'
are applied correctly next time.
This patch fixes the missing restoration of the 'report_type' value in
'selection_handle' that is reused for recurring 'report_for_selection'
calls.
An example scenario where this failed was with selecting an LV for
removal with "lvremove --select" while using a field in the selection
that required extra DM info or DM status call for the LV (that is,
"Logical Volume Device Info Fields" and "Logical Volume Device Status Fields"
as visible in 'lvs -S help').
Internally, NUM and BIN fields are marked as DM_REPORT_FIELD_TYPE_NUM_NUMBER
through libdevmapper API. The new 'json_std' format mandates that the report
string representing such a value must be a number, not an arbitrary string.
This is because numeric values in 'json_std' format do not have double quotes
around them. This practically means, we can't use string synonyms
("named reserved values") for such values and the report string must always
represent a proper number.
With 'json' and 'basic' formats, this is not an issue because 'basic' format
doesn't have any structure or typing at all and 'json' format puts all values
in quotes, including numeric ones.
The scanning rework missed removing this instance of label scan.
It's no longer needed because of the way that label scan is always
run once from the start of the command. This unnecessary scan
would be triggered by running 'pvs @tag'.
There have been two file locks used to protect lvm
"global state": "ORPHANS" and "GLOBAL".
Commands that used the ORPHAN flock in exclusive mode:
pvcreate, pvremove, vgcreate, vgextend, vgremove,
vgcfgrestore
Commands that used the ORPHAN flock in shared mode:
vgimportclone, pvs, pvscan, pvresize, pvmove,
pvdisplay, pvchange, fullreport
Commands that used the GLOBAL flock in exclusive mode:
pvchange, pvscan, vgimportclone, vgscan
Commands that used the GLOBAL flock in shared mode:
pvscan --cache, pvs
The ORPHAN lock covers the important cases of serializing
the use of orphan PVs. It also partially covers the
reporting of orphan PVs (although not correctly as
explained below.)
The GLOBAL lock doesn't seem to have a clear purpose
(it may have eroded over time.)
Neither lock correctly protects the VG namespace, or
orphan PV properties.
To simplify and correct these issues, the two separate
flocks are combined into the one GLOBAL flock, and this flock
is used from the locking sites that are in place for the
lvmlockd global lock.
The logic behind the lvmlockd (distributed) global lock is
that any command that changes "global state" needs to take
the global lock in ex mode. Global state in lvm is: the list
of VG names, the set of orphan PVs, and any properties of
orphan PVs. Reading this global state can use the global lock
in sh mode to ensure it doesn't change while being reported.
The locking of global state now looks like:
lockd_global()
previously named lockd_gl(), acquires the distributed
global lock through lvmlockd. This is unchanged.
It serializes distributed lvm commands that are changing
global state. This is a no-op when lvmlockd is not in use.
lockf_global()
acquires an flock on a local file. It serializes local lvm
commands that are changing global state.
lock_global()
first calls lockf_global() to acquire the local flock for
global state, and if this succeeds, it calls lockd_global()
to acquire the distributed lock for global state.
Replace instances of lockd_gl() with lock_global(), so that the
existing sites for lvmlockd global state locking are now also
used for local file locking of global state. Remove the previous
file locking calls lock_vol(GLOBAL) and lock_vol(ORPHAN).
The following commands which change global state are now
serialized with the exclusive global flock:
pvchange (of orphan), pvresize (of orphan), pvcreate, pvremove,
vgcreate, vgextend, vgremove, vgreduce, vgrename,
vgcfgrestore, vgimportclone, vgmerge, vgsplit
Commands that use a shared flock to read global state (and will
be serialized against the prior list) are those that use
process_each functions that are based on processing a list of
all VG names, or all PVs. The list of all VGs or all PVs is
global state and the shared lock prevents those lists from
changing while the command is processing them.
The ORPHAN lock previously attempted to produce an accurate
listing of orphan PVs, but it was only acquired at the end of
the command during the fake vg_read of the fake orphan vg.
This is not when orphan PVs were determined; they were
determined by elimination beforehand by processing all real
VGs, and subtracting the PVs in the real VGs from the list
of all PVs that had been identified during the initial scan.
This is fixed by holding the single global lock in shared mode
while processing all VGs to determine the list of orphan PVs.
Save the list of PVs in /run/lvm/hints. These hints
are used to reduce scanning in a number of commands
to only the PVs on the system, or only the PVs in a
requested VG (rather than all devices on the system.)
Native disk scanning is now both reduced and
async/parallel, which makes it comparable in
performance (and often faster) when compared
to lvm using lvmetad.
Autoactivation now uses local temp files to record
online PVs, and no longer requires lvmetad.
There should be no apparent command-level change
in behavior.
The report uses process_each_vg() which populates lvmcache
based on a VG list from lvmetad. If there are no VGs,
but only orphan PVs, the orphans are not shown. Add an
explicit call to populate lvmcache with PV info from lvmetad.
As we start refactoring the code to break dependencies (see doc/refactoring.txt),
I want us to use full paths in the includes (eg, #include "base/data-struct/list.h").
This makes it more obvious when we're breaking abstraction boundaries, eg, including a file in
metadata/ from base/
When old snapshot is merged, lvm2 still can report some data about
merged 'snapshot' - i.e. it occupied space in VG.
This patch fixes regression from commit:
6fd20be629
and resolved RHBZ: 1460161
The new check_single_lv() function is called prior to the
existing process_single_lv(). If the check function returns 0,
the LV will not be processed.
The check_single_lv function is meant to be a standard method
to validate the combination of specific command + specific LV,
and decide if the combination is allowed. The check_single
function can be used by anything that calls process_each_lv.
As commands are migrated to take advantage of command
definitions, each command definition gets its own entry
point which calls process_each for itself, passing a
pair of check_single/process_single functions which can
be specific to the narrowly defined command def.
This was missing piece in 77997c7673.
When merging origin is inactive (while driver is loaded) we
could already report merge in progress values as there is
no way to activate 'old state' now.
When there is 'merging' of an origin in progress, but metadata stil
do provide both origin and snapshot, we should show data from merged
snapshot. This is important mainly for thin case, where there was
a window, where i.e. 'lvs -o+device_id' would report information
about 'already gone' origin thin LV.
This race window is usually hard to trigger but can be ocasionally hit.
Usually shortly after activation, but before polling process manages
to update metadata after merge.
Drop LV from passed API arg - it's always segment being checked.
Also use_layer is now in full control of lv_info_with_seg_status().
It decides which device needs to be checked to get 'the most info'.
TODO: future version should be able to expose status from
Start moving selection of status taken for a LV into a single place.
The logic for showing info & status has been spread over multiple
places and were doing too complex decision going agains each other.
Unify selection of status of origin & cow scanned device.
TODO: in future we want to grab status for LV and layered LV and have
both statuses present for display - i.e. when 'old snapshot'
of thinLV is takes and there is ongoing merge - at some moment
we are not capable to show all needed info.
Reinstantiate reporting of metadata percent usage for cache volumes.
Also show the same percentage with hidden cache-pool LV.
This regression was caused by optimization for a single-ioctl in
2.02.155.
Commit e947c362dd introduced
config_settings.h file for central place to store all definitions for
config options. By mistake, it used report/colums_as_rows instead
of report/columns_as_rows (missing "n" in "columns").
When lvm commands are executed in lvm shell, we cover the whole lvm
command execution within this shell now. That means, all messages logged
and status caught during each command execution is now recorded in the
log report, including overall command's return code.
With patches that will follow, this will make it possible to widen log
report coverage when commands are executed from lvm shell so the amount
of messages that may end up in stderr/stdout instead of log report are
minimized.
Previously, a command sent lvmetad new VG metadata in vg_commit().
In vg_commit(), devices are suspended, so any memory allocation
done by the command while sending to lvmetad, or by lvmetad while
updating its cache could deadlock if memory reclaim was triggered.
Now lvmetad is updated in unlock_vg(), after devices are resumed.
The new method for updating VG metadata in lvmetad is in two phases:
1. In vg_write(), before devices are suspended, the command sends
lvmetad a short message ("set_vg_info") telling it what the new
VG seqno will be. lvmetad sees that the seqno is newer than
the seqno of its cached VG, so it sets the INVALID flag for the
cached VG. If sending the message to lvmetad fails, the command
fails before the metadata is committed and the change is not made.
If sending the message succeeds, vg_commit() is called.
2. In unlock_vg(), after devices are resumed, the command sends
lvmetad the standard vg_update message with the new metadata.
lvmetad sees that the seqno in the new metadata matches the
seqno it saved from set_vg_info, and knows it has the latest
copy, so it clears the INVALID flag for the cached VG.
If a command fails between 1 and 2 (after committing the VG on disk,
but before sending lvmetad the new metadata), the cached VG retains
the INVALID flag in lvmetad. A subsequent command will read the
cached VG from lvmetad, see the INVALID flag, ignore the cached
copy, read the VG from disk instead, update the lvmetad copy
with the latest copy from disk, (this clears the INVALID flag
in lvmetad), and use the correct VG metadata for the command.
(This INVALID mechanism already existed for use by lvmlockd.)
Simplify code around _do_get_report_selection - remove "expected_idxs[]"
argument which is superfluous and add "allow_single" switch instead to
allow for recognition of "--configreport <report_name> -S" as well as
single "-S" if needed.
Null pointer dereferences (FORWARD_NULL) /safe/guest2/covscan/LVM2.2.02.158/tools/reporter.c: 961 in _do_report_get_selection()
Null pointer dereferences (FORWARD_NULL) Dereferencing null pointer "single_args".
Uninitialized variables (UNINIT) /safe/guest2/covscan/LVM2.2.02.158/tools/toollib.c: 3520 in _process_pvs_in_vgs()
Uninitialized variables (UNINIT) Using uninitialized value "do_report_ret_code".
Null pointer dereferences (REVERSE_INULL) /safe/guest2/covscan/LVM2.2.02.158/libdm/libdm-report.c: 4745 in dm_report_output()
Null pointer dereferences (REVERSE_INULL) Null-checking "rh" suggests that it may be null, but it has already been dereferenced on all paths leading to the check.
Incorrect expression (MISSING_COMMA) /safe/guest2/covscan/LVM2.2.02.158/lib/log/log.c: 280 in _get_log_level_name()
Incorrect expression (MISSING_COMMA) In the initialization of "log_level_names", a suspicious concatenated string ""noticeinfo"" is produced.
Null pointer dereferences (FORWARD_NULL) /safe/guest2/covscan/LVM2.2.02.158/tools/reporter.c: 816 in_get_report_options()
Null pointer dereferences (FORWARD_NULL) Comparing "mem" to null implies that "mem" might be null.
Reporting commands can be of different types (even if the command name
is the same):
- pvs command can be either of PVS, PVSEGS or LABEL report type,
- vgs command is of VGS report type,
- lvs command is of LVS or SEGS report type.
Use basic report type when looking for report prefix used for
--configreport option.
This means that:
- 'pvs --configreport pv' applies to PVS, PVSEGS or LABEL report type
- 'vgs --configreport vg' applies to VGS report type
- 'lvs --configreport lv' applies to LVS and SEGS report type
This patch adds structures and functions to reroute error and warning
logs to log report, if it's set.
There are 5 new functions:
- log_set_report
Set log report where logging will be rerouted.
- log_set_report_context
Set context globally so any report_cmdlog call will use it.
- log_set_report_object_type
Set object type globally so any report_cmdlog call will use it.
- log_set_report_object_name_and_id
Set object ID and name globally so any report_cmdlog call will use it.
- log_set_report_object_group_and_group_id
Set object group ID and name globally so any report_cmdlog call will use it.
These functions will be called during LVM command processing so any logs
which are rerouted to log report contain proper information about current
processing state.
The lvm fullreport works per VG and as such, the vg, lv, pv, seg and
pvseg subreport is done for each VG. However, if the PV is not part of
any VG yet, we still want to display pv and pvseg subreports for these
"orphan" PVs - so enable this for lvm fullreport's process_each_vg call.
If we have fullreport, make sure that the options/sort keys used for
each report doesn't change its type - we want to preserve the original
type so it's always 5 different subreports within fullreport (vg, lv, pv,
seg, pvseg). Since we have all report types within fullreport, users
should add fields under proper subreport type - this minimizes
duplication of info displayed on output.
