IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Use common _lvname_disp to report lv_parent. The _lvname_disp
takes care of properly marking LVs which are not visible - such
LVs are always enclosed in brackets when reported within any
other field.
For example, thin pool over RAID.
Before:
$ lvs -a -o name,lv_parent,data_lv,metadata_lv vg
LV Parent Data Meta
cache_pool [cache_pool_tdata] [cache_pool_tmeta]
[cache_pool_tdata] cache_pool
[cache_pool_tdata_rimage_0] cache_pool_tdata
[cache_pool_tdata_rimage_1] cache_pool_tdata
[cache_pool_tdata_rmeta_0] cache_pool_tdata
[cache_pool_tdata_rmeta_1] cache_pool_tdata
[cache_pool_tmeta] cache_pool
[cache_pool_tmeta_rimage_0] cache_pool_tmeta
[cache_pool_tmeta_rimage_1] cache_pool_tmeta
[cache_pool_tmeta_rmeta_0] cache_pool_tmeta
[cache_pool_tmeta_rmeta_1] cache_pool_tmeta
[lvol0_pmspare]
With this patch applied:
$ lvs -a -o name,lv_parent,data_lv,metadata_lv vg
LV Parent Data Meta
cache_pool [cache_pool_tdata] [cache_pool_tmeta]
[cache_pool_tdata] cache_pool
[cache_pool_tdata_rimage_0] [cache_pool_tdata]
[cache_pool_tdata_rimage_1] [cache_pool_tdata]
[cache_pool_tdata_rmeta_0] [cache_pool_tdata]
[cache_pool_tdata_rmeta_1] [cache_pool_tdata]
[cache_pool_tmeta] cache_pool
[cache_pool_tmeta_rimage_0] [cache_pool_tmeta]
[cache_pool_tmeta_rimage_1] [cache_pool_tmeta]
[cache_pool_tmeta_rmeta_0] [cache_pool_tmeta]
[cache_pool_tmeta_rmeta_1] [cache_pool_tmeta]
[lvol0_pmspare]
Fix regression caused by commit c2d4330f27
which removed the dm_pool_strdup for the cache policy name in
_cache_policy_disp report function.
This regression was hit with buffered reporting only (which is
used by default). The reason is that for buffered reporting, we're
iterating over LVs in VG (process_each_lv) while gathering
all the information that is needed for the report. In this case,
the LV's cache policy name has not been duped, but only the pointer
to the original VG buffer was stored. When the LV iteration finished,
the VG buffer was freed and any report to output called later
(dm_report_output call) accessed already freed VG data.
This didn't appear if unbuffered reporting was used (--unbuffered)
because in this case, the data were reported to output as
soon as they were processed, hence it was reported to output
before the VG data was freed.
The lvm2-activation{-early,-net}.service systemd unit statuses were missing
in dump gathered by lvmdump -s. These are quite important when debugging
scenarios with systemd environment and where lvmetad is not used.
Pass full buffer size to printf() function - no reason to make
buffer 1 char smaller.
Also rename locn buffer to message buffer directly since it's
not used for anything else.
TODO: we may use same buffer also for 'buf[]' since there is
no collision - so may safe 1K on stack usage.
Just for convenience to display all new configuration settings
introduced since given version (before, there was only --atversion
to display settings introduced in concrete version).
For example:
$ lvmconfig --type new --sinceversion 2.2.120
allocation {
# cache_mode="writethrough"
# cache_settings {
# }
}
global {
use_lvmlockd=0
# lvmlockd_lock_retries=3
# sanlock_lv_extend=256
use_lvmpolld=1
}
activation {
}
# report {
# compact_output_cols=""
# time_format="%Y-%m-%d %T %z"
# }
local {
# host_id=0
}
When 'lvextend -L+XX vg/thinpool' do not leave inactive table
loaded for 'wrapping' LV on top of resized thin-pool
(ATM we use linear LV for this with same size as thin-pool).
Udev recently start to 'link-in' major amount of useless libs.
(Seem to be faulty 'systemd' link-in all issue)
Anyway - avoid locking those libs in RAM.
Avoid internal error message where thin pool repair code tries to
fix cache pool - was catched later in code stack, so rather
catch this early and make the repair function exlusive
to thin pools.
So far we have no code for repairing cache pools
(other then the automatic during activation/deactivation).
When reading older lvm2 metadata for cache-pool - we now handle more
extended syntax - basically we want to enter most setting when
actually creating cached LV.
For this new validation code has been added. However older metadata
without new settings set is now found as invalid.
Fix it by adding default settings for cache policy mq
and cache mode writethrough.
Udev db records are marked as not initialized (incomplete) on timeout.
Issue an error message whenever LVM finds such records so users are
aware that something's going wrong with udev db.
This is important in case we use devices/external_device_info_source="udev"
where udev database records are used to do various filtering decisions.
For example:
udev log of timed out worker:
Nov 11 13:02:25 raw.virt systemd-udevd[607]: seq 1997 '/devices/virtual/block/dm-2' is taking a long time
Nov 11 13:04:25 raw.virt systemd-udevd[607]: seq 1997 '/devices/virtual/block/dm-2' killed
Nov 11 13:04:25 raw.virt systemd-udevd[607]: worker [11221] terminated by signal 9 (Killed)
Nov 11 13:04:25 raw.virt systemd-udevd[607]: worker [11221] failed while handling '/devices/virtual/block/dm-2'
...
LVM also issues error message visibly if incomplete udev db record is found,
devices/external_device_info_source="udev" is set:
$ pvs
Udev database has incomplete information about device /dev/dm-2.
Failed to get external handle for device /dev/dm-2 [udev].
...
Doing 'stat' checking first and later opening is racy.
And since we do not really care about any 'status' info
here and we read 'sysfs' here - just drop whole 'stat()'
call and directly handle error from failing 'fopen()'.
Currently the code creates the log separately after allocating space for
the data and as no data allocation is needed this second time,
total_extents ends up holding zero so use new_extents directly instead.
Now with correctly functioning dmeventd enable usage of
low_water_mark for faster reaction on pool's threshold.
When user select e.g. 80% as a threshold value,
dmeventd doesn't need to wait 10 seconds till monitoring
timer expires, but nearly instantly resizes thin-pool
to fit bellow threshold.
The former patch(dab3ebce4c) is a little bit strict. For example, it is
OK to create PV on unpartitioned DASD devices with LDL formatted. So
after lvm version containing the patch, LVs created on those devices
could not be found.
Signed-off-by: Lidong Zhong <lzhong@suse.com>
Recognize the target only 'extends' and do not enforce
'flush' in this case. Only the size reduction
still requires flush (so disables usage of no_flush flag).
If some other targets do require flush before suspend,
they have to explicitly ask for it.
While the activation code tries to evaluate which target
really needs flush with suspend and which may go without flush,
it has stayed effectively disabled by original commit:
33f732c5e9 since here
it only allows to pass non-pvmoving 'mirrors'.
So remove check for mirror LV type and only disable
no_flush for 'pvmove'..
TODO: Looking into history - it also seemed like raid target
would have always required flushing but it's been later
removed without clean explanation.
If some more targets really do need 'no_flush' it should
been handle at their 'level' - since we now stack multiple
targets over itself.
Use single code to evaluate if the percentage value has
crossed threshold.
Recalculate amount value to always fit bellow
threshold so there are not need any extra reiterations
to reach this state in case policy amount is too small.
Since plugin's percentage compare has been fixed,
it's now revealed wrong compare here.
The logic for threshold is - to allow to go as high
as given value e.g. 80% - so if pool is exactlu 80%
full it's still allowed to use it (dmeventd will not
resize it).
When lvmetad is used and lvmcache update function (lvmcache_update_vgname_and_id)
was called to update existing lvmcache records, a condition was met
which made to retun from the update function immediately, effectively
making it NOOP.
It seems there's no reason for such condition and lvmcache should be
update appropriately even when lvmetad used as lvmcache may be reused,
most notably in lvm shell.
It's possible this is a remnant of the lvmetad development code which
didn't get removed for some reason and the bug didn't get spotted
because lvm shell is not used often (the condition dates back to 2012
or so).
Example, lvmetad and lvm shell used:
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/sda vg lvm2 a-- 124.00m 124.00m
Before this patch:
==================
lvm> vgremove vg
Volume group "vg" successfully removed
lvm> pvs
With this patch applied:
========================
lvm> vgremove vg
Volume group "vg" successfully removed
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/sda lvm2 --- 128.00m 128.00m
The lvmcache info might be resued, most notably in lvm shell.
We need to be sure that even lvmcache_info marked as invalid
is removed from the lvmcache so it does not confuse any subsequent
code/commands executed later on.
Problematic example with the lvm shell:
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/sda lvm2 --- 128.00m 128.00m
Before this patch (/dev/sda still displayed in a way):
======================================================
lvm> pvremove /dev/sda
Labels on physical volume "/dev/sda" successfully wiped
(without lvmetad)
lvm> pvs
No physical volume label read from /dev/sda
(with lvmetad)
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/sda lvm2 --- 128.00m 128.00m
With this patch applied:
========================
lvm> pvremove /dev/sda
Labels on physical volume "/dev/sda" successfully wiped
(without lvmetad)
lvm> pvs
(with lvmetad)
lvm> pvs
CONVERTING status flag is a tricky one. It's not set when converting
a non-mirror LV type to the mirror type, i.e.: linear -> two leg mirror.
Also the conversion itself is instant and doesn't require to be polled.
When mirror reaches sync state there's no final update on VG metadata
for lvmpolld to be made thereby report_progress in fact doesn't report
percentage of mirror being converted but percentage of mirror
being in sync. Perhaps we should reword the lvconvert output here.
On the other hand CONVERTING is set while we upconvert the mirror
from i.e. two leg mirror to four leg mirror. In such case the operation
is required to be polled so that lvmpolld can cleanup temporary
conversion log when the conversion is over.
Ignore CONVERTING lv_type for the moment and match LVs only by uuids
during 'mirror conversion'/'waiting for a sync to finish'.
The new report/compact_output_cols setting has exactly the same effect
as report/compact_output setting. The difference is that with the new
setting it's possible to define which cols should be compacted exactly
in contrast to all cols in case of report/compact_output.
In case both compact_output and compact_output_cols is enabled/set,
the compact_output prevails.
For example:
$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=0
compact_output_cols=""
$ lvs vg
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lvol0 vg -wi-a----- 4.00m
---
$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=0
compact_output_cols="data_percent,metadata_percent,pool_lv,move_pv,origin"
$ lvs vg
LV VG Attr LSize Log Cpy%Sync Convert
lvol0 vg -wi-a----- 4.00m
---
$ lvmconfig --type full report/compact_output report/compact_output_cols
compact_output=1
compact_output_cols="data_percent,metadata_percent,pool_lv,move_pv,origin"
$ lvs vg
LV VG Attr LSize
lvol0 vg -wi-a----- 4.00m
This reverts commit 1b1c01a27b.
This caused messages to get dropped instead of logged into the log file.
(The log file and log function are independent at the moment.)
Some signatures are spread around the disk in several copies, mainly for
backup. Make libblkid to detect these extra copies - there was missing
"blkid_probe_step_back" fn call after successful wipe of previous signature
copy.
An example with FAT table which has copies:
$ mkfs.vfat /dev/sda1
Before this patch:
$ pvcreate /dev/sda1
WARNING: vfat signature detected on /dev/sda1 at offset 54. Wipe it? [y/n]: y
Wiping vfat signature on /dev/sda1.
Physical volume "/dev/sda1" successfully created
With this patch applied:
$ pvcreate /dev/sda1
WARNING: vfat signature detected on /dev/sda1 at offset 54. Wipe it? [y/n]: y
Wiping vfat signature on /dev/sda1.
WARNING: vfat signature detected on /dev/sda1 at offset 0. Wipe it? [y/n]: y
Wiping vfat signature on /dev/sda1.
WARNING: vfat signature detected on /dev/sda1 at offset 510. Wipe it? [y/n]: y
Wiping vfat signature on /dev/sda1.
Physical volume "/dev/sda1" successfully created
$ vgcreate vgA /dev/sda
Volume group "vgA" successfully created
$ dd if=/dev/sda of=/dev/sdb bs=1M
$ dd if=/dev/sda of=/dev/sdc bs=1M
(the new VG name is prefix of existing VG name)
$ vgimportclone -n vg /dev/sdb
(the new VG name is suffix of existing VG name)
$ vgimportclone -n gA /dev/sdc
Before this patch:
------------------
(we end up with "vg1" and "gA1" names with the "1" suffix which is not needed)
$ vgs -o vg_name
VG
gA1
vg1
vgA
With this patch applied:
------------------------
(we end up with "vg" and "gA" names as they're unique already and no extra suffix is added)
$ # vgs -o vg_name
VG
gA
vg
vgA
Of course, if the name supplied is not unique, the number is added correctly:
$ dd if=/dev/sda of=/dev/sdb bs=1M
$ vgimportclone -n vgA /dev/sdb
$ vgs -o vg_name
VG
vgA
vgA1
We can replace the expressions with awk/grep/cut/tr with --select now and
more suitable reporting options and modes. Also, we don't need to check
the temporary lvm.conf generated within vgimportclone script since we're
generating it ourselves now using lvmconfig, not using sed anymore like
it was before (so we can be pretty sure it's correct - we use lvmconfig
now even for generating the lvm.conf itself).
We already have pv_count to report number of PVs that a VG has based
on metadata.
This patch exposes the information about how many of these PVs are
missing which is also useful information for a VG. Wwe could count
the sum of pv_missing reporting fields for each PV in the VG before,
but the new field is practical when reporting VG as a whole and there's
no need to process each PV from VG alone.
Before this patch:
$ lvs -a -o name,layout,role test/lvmlock
LV Layout Role
[lvmlock] linear public
With this patch applied:
$ lvs -a -o name,layout,role test/lvmlock
LV Layout Role
[lvmlock] linear private,lockd,sanlock
Add metadata_devices and seg_metadata_le_ranges report fields.
Currently only defined for raid, but should probably be extended
to all other segment types that don't report all their device
usage in the 'devices' field.
We want most of our units to be started before any local/remote mount
points are mounted - we used {local,remote}-fs.target for this purpose
before, but it was not 100% correct as there's even {local,remote}-fs-pre.target
special systemd unit reserved for this exact purpose.
See also man 7 systemd.special and "local-fs-pre.target"/"remote-fs-pre.target"
description.
When using lvm shell, some structures which are cached in memory may be
reused. This happens for the struct label (a part of lvmcache_info
structure) when lvmetad is used in which case the PV scan is not
done that would normally overwrite these label structures in memory
and making them up-to-date.
This is all consequence of the fact that struct lvmcache_info and
struct label are not always assigned in the same part of the code.
For example, if lvmetad *is not* used, parts of the struct label are
reassigned in label_read fn while struct lvmcache_info is created
elsewhere. No part of the code reused struct label (and its "dev"
field) before calling label_read fn. That's why the real bug is
hidden when using lvm shell without lvmetad.
However, with lvmetad and lvm shell, the situation is a bit different.
The label_read fn is not called if lvmetad *is* used, hence the
struct label may have ended up not initialized properly.
There was missing assignment for the dev field in struct label
in _text_pv_write fn which caused this problem to appear in
lvm shell with lvmetad, for example:
Before this patch:
lvm> pvcreate /dev/sda
Physical volume "/dev/sda" successfully created
lvm> pvs /dev/sda
PV VG Fmt Attr PSize PFree
unknown device lvm2 --- 128.00m 128.00m
With this patch applied:
lvm> pvcreate /dev/sda
Physical volume "/dev/sda" successfully created
lvm> pvs /dev/sda
PV VG Fmt Attr PSize PFree
/dev/sda lvm2 --- 128.00m 128.00m
Also, this problem had not appeared before changes introduced
by commits e1a63905d1 through
3a6f91d713 which, among other
things, added proper label field type reporting. Before, label
reporting was the same as using struct physical_volume which
has its own dev field assigned and so this problem was not exposed.
Commit 00b36ef06a had a typo
and missed '{' for shell variable, thus command used slightly
different 'tmp' dir name for cache dir (with extra '}').
Such change was unnoticed until a recent fix in persistent
filter, lvm2 missed to update cache file when --config
was specified.
The result was, /tmp dir was accumulating snap.XXXXX} dirs when
running vgimportclose script.
Since we may want to swap names when LVs are complex types, we cannot
avoid doing full renames on both LV stacks.
Temporarily use 'pvmove_tmeta' as unused name to prevent validation troubles.
ATM allocation can't handle stripping and cache pool allocation.
It's not yet even clear what should be actually result.
Until resolved, disable this option (it's been coredumping
inside allocation anyway).
Certain stacks of cached LVs may have unexpected consequences.
So add a warning function called when LV is cached to detect
such caces and WARN user about them - the best we could do ATM.
When we insert layer we also move status flag-bits for certain LV types,
so internal volume_group structure remains consistent.
(Perhaps it's misuse of 'insert_layer' function and we should have
another similar function for this.)
Basically we aim to maintain the same state as after reading fresh
metadata out of volume group.
Currently we when i.e. cache 'raid' LV - this should transfer 'raidLV' flag
to _corigin LV and cache is no longer a raid.
TODO: bits for stacked devices needs more exact rules.
Commit f6473baffc introduced a new
cmd->initialized variable to keep info about which parts of the
cmd_context have been initialized.
A part of this patch was also a change in refresh_filters fn
which checks for cmd->initialized.filters variable and it does
the filter refresh *only* if the filter has already been initialized
before otherwise it's a NOOP (before, the refresh_filters also
initialized filters as a side effect in case it had not been
initialized before which was not quite correct).
However, the commit f6473baffc
did not handle the case in which configuration changes
either via --config argument or when configuration file changed
and its timestamp was higher than the timestamp of the persistent
cache file - the /etc/lvm/cache/.cache.
This patch fixes this issue and it causes the init_filters fn
in lvm_run_command fn to be called with proper value of
"load_persistent_cache" switch even if the configuration changes,
hence causing the persistent cache file to be ignored in this
case.
Relocate generated configure.h and lvm-version.h outside
of compilable .c source tree.
The reason is behind - when compiling in builddir != srcdir
the generated file in lib/misc/configure.h was used for all compiled
source file except ones located in lib/misc dir - those would have used
configure.h file located in this dir - if there have existed one (i.e.
from some other build)
This problem was only visible, when srcdir == buildir was used before
trying to use srcdri != builddir (as configure.h appeared then in
srcdir).
As part of fix that came with cf700151eb,
I forgot to add the check whether the result of stat was successful or
not. This bug caused uninitialized buffer to be used for entries
from .cache file which are no longer valid.
This bug may have caused these uninitialized values to be used further,
for example (see the unreal (2567,590944) representing major:minor
pair):
$ pvs
/dev/abc: stat failed: No such file or directory
Path /dev/abc no longer valid for device(2567,590944)
PV VG Fmt Attr PSize PFree
/dev/mapper/test lvm2 --- 104.00m 104.00m
/dev/vda2 rhel lvm2 a-- 9.51g 0
