IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Drop unused passed cmd pointer from function.
TODO:
We have two similar functions (though not identical)
lv_manip.c: for_each_sub_lv()
metadata.c: _lv_each_dependency()
They seem to not always match - we should probably convert
to use only a single function.
Use proper vgmem memory pool for allocation of LV name in the vg
and check if new renamed LV is a valid name.
TODO: validation should really use also VG name, othewise we are not
able to tell "vgname-lvname" will be valid.
Commit 1a832398a7 moved
some code from _pvchange_single() to main pvchange() and
introduced exit code regression as return codes have not
been properly changed, thus pvchange command exited
with '0' exit code, even though it has reported error.
Also there is a missing vg unlock in error path.
Fix it by counting the total number of expected calls before
checking for pvname and also unlock and relase vg when
pv is not found.
For a quick overview of config when debugging and to quickly check
which values are different from defaults and which are not defined
in the config and for which defaults are used.
When lvm2 command works with clvmd and uses locking in wrong way,
it may 'leak' certain file descriptors in opened (incorrect) state.
dev_cache_exit then destroys memory pool of cached devices, while
_open_devices list in dev-io.c was still referencing them if they
were still opened.
Patch properly calls _close() function to 'self-heal' from this
invalid state, but it will report internal error (so execution
with abort_on_internal_error causes immediate death). On the
normal 'execution', error is only reported, but memory state is
corrected, and linked list is not referencing devices from
released mempool.
For crash see: https://bugzilla.redhat.com/show_bug.cgi?id=1073886
Smallest supported size for swap device is 40KB, however current
test skipped devices smaller then 4096 sectors (2MB).
Since page is in bytes, convert it to sectors before comparing
with device size (in sectors).
pvscan --uuid was broken since it was using only 128 char buffers
without checking any write size, so any longer device path leads to
crash.
Also ansure format is properly aligned into columns with this option.
The PV size is displayed in sectors, not kilobytes
for 'pvdisplay -c'
Signed-off-by: Thomas Fehr <fehr@suse.de>
Acked-by: Hannes Reinecke <hare@suse.de>
Instead of sending repeatedly LOCAL_SYNC commands to clvmds
like 'lvs', rememeber the last sent commmand, and if there was no other
clvmd command, drop this redundant SYNC call message.
The problem has started with commit:
56cab8cc03
This introduced correct synchronisation of name, when user requests to know
open_count (needs to wait for udev), however it is also executed for
read-only cases like 'lvs' command.
For now implement very simple solution, which is only monitoring
outgoing clvmd command, and when sequence of LOCAL sync names are
recognized, they are skipped automatically.
TODO:
Future solution might move this variable info 'cmd_context' and
use 'needs_sync' flag also i.e. in file locking code.
When the backup is disabled, avoid testing backup presence.
This only leads to errors being logged in debug trace and the missing
backup can't be fixed, since it's disabled.
Check whether lvm dumpconfig --mergedconfig is used only
with --type current (where we're merging current config and
the config supplied on command line). With other types
the config was merged, but it was thrown away since we're
generating other type of config anyway. This lead to a memleak.
Error out if --mergedconfig is used with anything else than
--type current (or without specifying --type in which case
the --type current is used by default).
Do not allow conversion of too small LV into a COW snapshot device.
Without this patch snapshot target is generating these kernel
messages before creation fails:
attempt to access beyond end of device
dm-9: rw=16, want=8, limit=2
attempt to access beyond end of device
...
device-mapper: table: 253:11: snapshot: Failed to read snapshot metadata
device-mapper: ioctl: error adding target to table
device-mapper: reload ioctl on failed: Input/output error
Usage of origin as a snapshot 'COW' volume is unsupported.
Without this test lvm2 is able to generate this ugly internal error message.
To test this:
lvcreate -L1 -n lv1 vg
lvcreate -L1 -n lv2 -s vg/lv1
lvcreate -L1 -n lv3 vg
lvconvert -s vg/lv3 vg/lv1
Internal error: LVs (5) != visible LVs (1) + snapshots (1) + internal LVs (0) in VG vg
Users can create several profiles for how the tools report
the output very easily and then just use
<lvm reporting command> --profile <report_profile_name>
This prevents numerous VG refreshes on each "pvscan --cache -aay" call
if the VG is found complete. We need to issue the refresh only if the PV:
- is new
- was gone before and now it reappears (device "unplug/plug back" scenario)
- the metadata has changed
Let's do this the other way round - this makes more logic than commit b995f06.
So let's allow empty values for global/thin_disabled_features where
such an empty value now means "none of this features are disabled".
The empty pool is also the pool which has yet queued list of messages
and transaction_id == 1.
Problem is exposed when pool is created inactive.
lvcreate -L10 -T vg/pool -an
lvcreate -V10 -T vg/pool
When pool_has_message() is queried with NULL lv and 0 device_id
it should just return 'true' when there is any message queued.
So it needs to return negative value dm_list_empty().
Since there is no user for this code path in code currently,
this bug has not been triggered.
This patch will releases allocated private resources from
startup. Needs previous dm_zalloc patch to ensure unset
private pointer is NULL.
TODO: check on real cluster.
Based on patch:
https://www.redhat.com/archives/lvm-devel/2014-March/msg00015.html
The CPPFunction typedef (among others) have been deprecated in favour of
specific prototyped typedefs since readline 4.2 (circa 2001).
It's been working since because compatibility typedefs have been in
place until they where removed in the recent readline 6.3 release.
Switch to the new style to avoid build breakage.
But also add full backward compatibility with define.
Signed-off-by: Gustavo Zacarias <gustavo zacarias com ar>
If the PV label is lost (e.g. by doing a dd on the device), call
"systemd-run pvscan --cache <major>:<minor>" in 69-dm-lvm-metad.rules
to inform lvmetad about this state.
The reason for this is that ENV{SYSTEMD_WANTS}="lvm2-pvscan@<major>:<minor>"
logic will not cause the pvscan to be fired in this case since this works
only on proper device addition/removal cycle - the lvm2-pvscan service's
ExecStop is called only on proper REMOVE event - the service is bound to
device existence. Hence we need pvscan call via systemd-run (that
instantiates a quick transient service just to call the command).
See also https://bugzilla.redhat.com/show_bug.cgi?id=1063813.
Code uses target driver version for better estimation of
max size of COW device for snapshot.
The bug can be tested with this script:
VG=vg1
lvremove -f $VG/origin
set -e
lvcreate -L 2143289344b -n origin $VG
lvcreate -n snap -c 8k -L 2304M -s $VG/origin
dd if=/dev/zero of=/dev/$VG/snap bs=1M count=2044 oflag=direct
The bug happens when these two conditions are met
* origin size is divisible by (chunk_size/16) - so that the last
metadata area is filled completely
* the miscalculated snapshot metadata size is divisible by extent size -
so that there is no padding to extent boundary which would otherwise
save us
Signed-off-by:Mikulas Patocka <mpatocka@redhat.com>
While stripe size is twice the physical extent size,
the original code will not reduce stripe size to maximum
(physical extent size).
Signed-off-by: Zhiqing Zhang <zhangzq.fnst@cn.fujitsu.com>
When read-only snapshot was created, tool was skipping header
initialization of cow device. If it happened device has been
already containing header from some previous snapshot, it's
been 'reused' for a newly created snapshot instead of being cleared.
To make "lvm dumpconfig --type default" output to be usable like any
other config, we need to comment out lines that have no default value
defined. Otherwise, we'd have the output with config options
with blank or zero values which is not the same as when the value
is not defined! And such configuration can't be feed into lvm again
without further edits. So let's fix this.
Currently this covers these configuration options exactly:
devices/loopfiles
devices/preferred_names
devices/filter
devices/global_filter
devices/types
allocation/cling_tag_list
global/format_libraries
global/segment_libraries
activation/volume_list
activation/auto_activation_volume_list
activation/read_only_volume_list
activation/mlock_filter
metadata/dirs
metadata/disk_areas
metadata/disk_areas/<disk_area>
metadata/disk_areas/<disk_area>/start_sector
metadata/disk_areas/<disk_area>/size
metadata/disk_areas/<disk_area>/id
tags/<tag>
tags/<tag>/host_list
Reorder detection of cmirrord. Now if cmirrord is not
running, target will not try to load kernel log module,
for communication with cmirrord.
Whole check for attrs now also happens just once.
Test raid10 availability as a target feature (instead of doing
it in all the places where raid10 should be checked).
TODO: activation needs runtime validation - so metadata with raid10
are skipped from activation in user-friendly way in lvm2.
Parsing vg structure during supend/commit/resume may require a lot of
memory - so move this into vg_write.
FIXME: there are now multiple cache layers which our doing some thing
multiple times at different levels. Moreover there is now different
caching path with and without lvmetad - this should be unified
and both path should use same mechanism.
Remove 'skip' argument passed into the function.
We always used '0' - as this is the only supported
option (-K) and there is no complementary option.
Also add some testing for behaviour of skipping.
We already have /dev/disk/by-id/dm-uuid-... (which encompasses the
VG UUID and LV UUID in case of LVs since the mapping's UUID is
VG+LV UUID together) and /dev/disk/by-id/dm-name-... (which encompasses
the VG and LV name in case of LVs).
This patch addds /dev/disk/by-id/lvm-pv-uuid-<PV_UUID> that completes
this scheme and makes navigation a bit easier using PV UUIDs since
one can navigate using PV UUIDs only and there's no need to do extra
PV UUID <--> kernel name matching (the PV UUID is stable across reboots).
This may come in handy in various scripts.
Since we already have the PV UUID stored in udev database (as a result
of blkid call - returned in ID_FS_UUID blkid's variable), this operation
is very cheap indeed, just creating the extra one symlink.
There are typically 2 functions for the more advanced segment types that
deal with parameters in lvcreate.c: _get_*_params() and _check_*_params().
(Not all segment types name their functions according to this scheme.)
The former function is responsible for reading parameters before the VG
has been read. The latter is for sanity checking and possibly setting
parameters after the VG has been read.
This patch adds a _check_raid_parameters() function that will determine
if the user has specified 'stripe' or 'mirror' parameters. If not, the
proper number is computed from the list of PVs the user has supplied or
the number that are available in the VG. Now that _check_raid_parameters()
is available, we move the check for proper number of stripes from
_get_* to _check_*.
This gives the user the ability to create RAID LVs as follows:
# 5-device RAID5, 4-data, 1-parity (i.e. implicit '-i 4')
~> lvcreate --type raid5 -L 100G -n lv vg /dev/sd[abcde]1
# 5-device RAID6, 3-data, 2-parity (i.e. implicit '-i 3')
~> lvcreate --type raid6 -L 100G -n lv vg /dev/sd[abcde]1
# If 5 PVs in VG, 4-data, 1-parity RAID5
~> lvcreate --type raid5 -L 100G -n lv vg
Considerations:
This patch only affects RAID. It might also be useful to apply this to
the 'stripe' segment type. LVM RAID may include RAID0 at some point in
the future and the implicit stripes would apply there. It would be odd
to have RAID0 be able to auto-determine the stripe count while 'stripe'
could not.
The only draw-back of this patch that I can see is that there might be
less error checking. Rather than informing the user that they forgot
to supply an argument (e.g. '-i'), the value would be computed and it
may differ from what the user actually wanted. I don't see this as a
problem, because the user can check the device count after creation
and remove the LV if they have made an error.
When clustered VG is available in the system but we don't have
clustering set up for whatever reason, the lvm2-monitor scripts should
not fail completely just because these clustered VGs are skipped during
vgs/vgchange calls in lvm2-monitor initscript/systemd unit.
When the activation units are generated if use_lvmetad=0 (no
autoactivation), use --ignoreskippedcluster option for vgchange calls
since the cluster with cLVM is set up by separate units.
This avoids a situation in which the generated activation units are
improperly in failed state just because of the vgchange return value
when clustered VGs are encountered while the activation of non-clustered
VGs does proceed normally.
lv_active_change will enforce proper activation.
Modification of activation was wrong and lead to misuse of
autoactivation. Fix allows to use proper local exclusive activation,
while the removed code turned this into just exclusive
activation (losing required local property).
lvm2_cluster_activation_red_hat.service.in -> lvm2_cluster_activation_systemd_red_hat.service.in
lvm2_clvmd_red_hat.service.in -> lvm2_clvmd_red_hat.service.in
Edit lvm2-cluster-activation reference on cmirror - take new
lvm2-cmirrord.service, it was just cmirrord(.service) before
as the old initscript was used in compatibility mode.
Also, use WantedBy=multi-user.target instead of sysinit.target
in lvm2-cluster-activation.service.
The commit splits original clvmd service in two new native services
for systemd enabled systems while original init scripts remain unaltered.
New systemd native services:
1) clvmd daemon itself (lvm2_clvmd_red_hat.service.in)
2) (de)activation of clustered VGs (lvm2_cluster_activation_red_hat.service.in)
There're several reasons to split it. First, there's no support for conditional
stop in systemd and AFAIK they don't plan to support it. In other words:
if the deactivation fails for some reason, systemd doesn't care and will simply
kill all remaining processes in original cgroup (by default). Killing the
remaining procs can be suppressed however it doesn't solve the following problem:
You can't repeat the stop command of a failed service. The repeated stop command
is simply not propagated to the service in a failed state. You would have to start
and then try to stop the service again. Unfortunately, this can't be done while
the daemon is still running (and we need the daemon to stay active until all
clustered VGs are deactivated properly).
In a separated setup we need only to restart the failed activation service and
that's fine.
No need to fork lvmetad when running under systemd.
Also, the "lvmetad -R" support has been removed in lvm2 v2.02.98
so remove the ExecReload line that called it on "systemctl reload".
The libblkid can detect DM_snapshot_cow signature and when creating
new LVs with blkid wiping used (allocation/use_blkid_wiping=1 lvm.conf
setting and --wipe y used at the same time - which it is by default).
Do not issue any prompts about this signature when new LV is created
and just wipe it right away without asking questions. Still keep the
log in verbose mode though.
Avoid use of external origin with size unaligned/incompatible with
thin pool chunk size, since the last chunk is not correctly provisioned
when it is overwritten.
Avoid starting conversion of the LV to the thin pool and thin volume
at the same time. Since this is mostly a user mistake, do not try
to just convert to one of those type, since we cannot assume if the
user wanted LV to become thin volume or thin pool.
Before the fix tool reported pretty strange internal error:
Internal error: Referenced LV lvol1_tdata not listed in VG mvg.
Fixed output:
lvconvert --thinpool lvol0 -T mvg/lvol0
Can't use same LV mvg/lvol0 for thin pool and thin volume.
When lvm2 command forks, it calls reset_locking(),
which as an unwanted side effect unlinked lock file from filesystem.
Patch changes the behavior to just close locked file descriptor
in children - so the lock is being still properly hold in the parent.
Test LVM_LVMETAD_PIDFILE for pid for lvm command.
Fix WHATS_NEW envvar name usage
Fix init order in prepare_lvmetad to respect set vars
and avoid clash with system settings.
Update test to really test the 'is running' message.
Comparing for available feature missed the code path, when
maj is already bigger.
The bug would be only hit in the case, thin pool target would have
increased major version.
When thin volume is using external origin, current thin target
is not able to supply 'extended' size with empty pages.
lvm2 detects version and disables extension of LV past the external
origin size in this case.
Thin LV could be however still reduced and extended freely bellow
this size.
We need both offset and length when trying to wipe detected signatures.
The libblkid can fail so it's good to have an error message issued for
this state instead of being silent (libblkid does not issue any error
messages here). We just issued "stack" here before but that was not
quite useful if some error occurs...
Only flag thin LV for no scanning in udev if this LV is about
to be wiped. This happens only in case the thin LV's pool was not
created with zeroing of the new blocks enabled.
DO NOT USE LVMETAD IF YOU HAVE ANY LVM1-FORMATTED PVS.
You may continue to use it without lvmetad, but do please schedule
an upgrade to the lvm2 format (with 'vgconvert').
Sending the original LVM1 formatted metadata to lvmetad is breaking
assumptions made by the code, so I am marking the format as obsolete for
now and no longer sending it to lvmetad.
This means that if you are using lvmetad, lvm1 volumes will usually
appear invisible - though not always: it depends on exactly what
sequence of commands you run!
The current situation is not satisfactory.
We'll either fix lvmetad and reenable this or we'll fix the code to
issue appropriate warning messages when lvm1 PVs are encountered
to avoid accidents.
(The latest unfixed problem is that lvmetad assumes metadata sequence
numbers exist and always increase - but the lvm1 format does not define
or store any sequence number, confusing both the daemon and client
when default values get passed to-and-fro.)
If a PV in an existing VG becomes orphaned (with 'pvcreate -ff', for
example) the VG struct cached against its vginfo must be invalidated.
This is because the struct device it references no longer contains
the PV label so becomes incorrect.
This triggers the error:
Internal error: PV $dev unexpectedly not in cache.
when the PV from the cached VG metadata is subsequently looked up
in the cache.
Bug introduced in 2.02.87 by commit 7ad0d47c3c
("Cache and share generated VG structs").
Before:
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/loop3 vg12 lvm2 a-- 28.00m 28.00m
/dev/loop4 vg12 lvm2 a-- 28.00m 28.00m
lvm> pvcreate -ff /dev/loop3
Really INITIALIZE physical volume "/dev/loop3" of volume group "vg12" [y/n]? y
WARNING: Forcing physical volume creation on /dev/loop3 of volume group "vg12"
Physical volume "/dev/loop3" successfully created
lvm> pvs
Internal error: PV /dev/loop3 unexpectedly not in cache.
PV VG Fmt Attr PSize PFree
/dev/loop3 vg12 lvm2 a-- 28.00m 28.00m
/dev/loop3 lvm2 a-- 32.00m 32.00m
/dev/loop4 vg12 lvm2 a-- 28.00m 28.00m
After:
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/loop3 vg12 lvm2 a-- 28.00m 28.00m
/dev/loop4 vg12 lvm2 a-- 28.00m 28.00m
lvm> pvcreate -ff /dev/loop3
Really INITIALIZE physical volume "/dev/loop3" of volume group "vg12" [y/n]? y
WARNING: Forcing physical volume creation on /dev/loop3 of volume group "vg12"
Physical volume "/dev/loop3" successfully created
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/loop3 lvm2 a-- 32.00m 32.00m
/dev/loop4 vg12 lvm2 a-- 28.00m 28.00m
unknown device vg12 lvm2 a-m 28.00m 28.00m
When using filters for the pvscan --cache (the global_filter),
there's a difference between:
pvscan --cache -aay /dev/block/<major>:<minor>
and
pvscan --cache -aay <major>:<minor> (or --major <major> --minor <minor>)
In the first case, we need to be sure to have an exact matching line
in the filter for the device to be used, no aliases are considered
So for example even if we have accept rule for "/dev/sda" present,
this won't apply for "/dev/block/8:0" even though it's the same device!
This is because we're comparing the path used on command line directly
with the path written in the rule.
For the second one, any alias mentioned in the filter will apply
as we're comparing the major and minor pair, not looking at actual
device names - so any alias mentioned in the rules will suffice for
the filtering rule to apply.
For the global_filter to be properly used, we need to call the
second one in the lvm2-pvscan@.service - nobody is able to tell
what value of major:minor the kernel assignes next time, hence
this bug makes the use of global_filter quite unusable!
This reverts commit 24639be558.
Ok - seems we could be here a bit too active - and we
may remove devices which are unsuable for reasons we are not
aware of - thus taking down whole device could be way to big hammer.
So we still need some solution to recover from failing preload
and activation - but it needs more tunning.
When activation fails - we may leak large tree of partially loaded
devices in the dm table (i.e. failure in snapshot activation)
The best we can do here is try to deactivate whole device and
remove as much inactive table entries as we can.
When LV is scanned for its dependencies - scan also origin's snapshots,
and thin external origins.
So if any PV from snapshot or external origin device is missing - lvm2 will
avoid trying to activate such device.
When the device is inserted in dev_name_confirmed() stat() is
called twice as _insert() has it's own stat() call.
Extend _insert() parameter with struct stat* - which could be used
if it has been just obtained. When NULL is passed code is
doing its own stat() call as before.
Use internal type by default for thin provisioning.
If user is not interested in thin provisiong and doesn't
have thin provisining supporting tools installed,
configure will just print warning at the end of configure
process about limited support.
Boolean algebra changes for process_each_lv_in_vg().
1st.
Drop process_lv variable since it's not needed.
2nd.
process_lv was always initilized to 0 - so the condition was always true.
It the condition (!tags_supplied && !lvargs_supplied) evaluates as "true",
process_all is already set to 1, so skip vg tags evaluation.
3rd.
Move check for matching lv name in the front of lv tags check
since this check can't be skipped for lvargs_matched counter.
If this filter evaluates to true, skip lv tags evaluation.
Thin kernel target 1.9 still does not support online resize of
thin pool metadata properly - so disable it with expectation
for much higher version - and reenable after fixing kernel.
Since activation takes only read-lock, there could be
multiple activation running in parallel.
So instead of checking before taking any real lock,
let the locking resolve the problem and just
detect if the reason for failure has been remote
exlusive activation.
It should be also faster, since each activation does
not need to do explicit lock query.
The PIE and RELRO compiler/linker options can be used to produce a code
some techniques applied that makes the code more immune to some attacks:
- PIE (Position Independent Executable). It can make use of the ASLR
(Address Space Layout Randomization) provided by kernel to avoid
static locations for .text regions of executables (this is the 'pie'
compiler and linker option)
- RELRO (Relocation Read-Only). This prevents overwrite attacks of
the GOT (Global Offset Table) and PLT (Procedure Lookup Table)
used for relocations by making it read-only after all relocations
are resolved (these are the 'relro' and 'now' linker options) -
hence all symbols are resolved at the very start so there's no
need for those tables to be writeable later.
These compiler/linker options are now used by default for daemons
if the compiler/linker supports it.
In the case we have a dir with multiple objects and for
an individual object file we need special define -
allow to define it without adding extra rules.
To ensure dmeventd.o compilation will use EXTRA_FLAGS:
CFLAGS_dmeventd.o += $(EXTRA_FLAGS)
Then it's better to use:
dmeventd.o: CFLAGS += $(EXTRA_FLAGS)
At the end of lvconvert --snapshot with an active origin, the origin
gets reloaded.
Commit 57c0f72b1d ("lvconvert: use
_reload_lv on more places") accidentally replaced this with a snapshot
LV reload (which does nothing because only the origin is active).
Make it easier to run a live lvmetad in debugging mode and
to avoid conflicts if multiple test instances need to be run
alongside a live one.
No longer require -s when -f is used: use built-in default.
Add -p to lvmetad to specify the pid file.
No longer disable pidfile if -f used to run in foreground.
If specified socket file appears to be genuine but stale, remove it
before use.
On error, only remove lvmetad socket file if created by the same
process. (Previous code removes socket even while a running instance
is using it!)
If using lv/vgchange --sysinit -aay and lvmetad is enabled, we'd like to
avoid the direct activation and rely on autoactivation instead so
it fits system initialization scripts.
But if we're calling lv/vgchange --sysinit -aay too early when even
lvmetad service is not started yet, we just need to do the direct
activation instead without printing any error messages (while
trying to connect to lvmetad and not finding its socket).
This patch adds two helper functions - "lvmetad_socket_present" and
"lvmetad_used" which can be used to check for this condition properly
and avoid these lvmetad connections when the socket is not present
(and hence lvmetad is not yet running).
Revert 4777eb6872 which put
target_present check into init_snapshot_merge(). However
this function is also used when parsing metadata. So we would
get this present test performed even when target is not really
needed. So move this target_present test directly into lvconvert.
Fix buggy usage of "" (empty string) as a numerical string
value used for sorting.
On intel 64b platform this was typically resolve
as 0xffffff0000000000 - which is already 'close' to
UINT64_MAX which is used for _minusone64.
On other platforms it might have been giving
different numbers depends on aligment of strings.
Use proper &_minusone64 for sorting value when the reported
value is NUM.
Note: each numerical value needs to be thought about if it needs
default value &_zero64 or &_minusone64 since for cases, were
value of zero is valid, sorting should not be mixing entries
together.
Add wrapper function for dm_report_field_set_value() which returns void
and return 1, so the code could be shorter.
Add wrapper function for percent display _field_set_percent().
There's a tiny race when suspending the device which is part
of the refresh because when suspend ioctl is performed, the
dm kernel driver executes (do_suspend and dm_suspend kernel fn):
step 1: a check whether the dev is already suspended and
if yes it returns success immediately as there's
nothing to do
step 2: it grabs the suspend lock
step 3: another check whether the dev is already suspended
and if found suspended, it exits with -EINVAL now
The race can occur in between step 1 and step 2. To prevent
premature autoactivation failure, we're using a simple retry
logic here before we fail completely. For a complete solution,
we need to fix the locking so there's no possibility for suspend
calls to interleave each other to cause this kind of race.
This is just a workaround. Remove it and replace it with proper
locking once we have that in!
Failures in the temporary mirror used when up-converting cause dmeventd
to issue 'lvconvert --repair' on the sub-LV, <lv_name>_mimagetmp_?. The
'lvconvert' command refuses to deal with this sub-LV outright - it
expects to be given the name of the top-level LV. So, just like we do
with mirrored logs, we strip-off the portion of the name that is not
the top-level LV and issue the command on the top-level LV instead.
This patch fixes mostly cluster behavior but also updates
non-cluster reaction where calls like 'lvchange -aln'
lead to incorrect errors for some segment types.
Fix the implicit activation rules where some segment types could
be activated only in exclusive mode in cluster.
lvm2 command was not preserver 'local' property and incorrectly
converted local activations in to plain exclusive, so the local
activation could have activate volumes exclusively, but remotely.
If the volume_list filters out volume from activation,
it is still success result for this function.
Change the error message back to verbose level.
Detect if the volume is active localy before zeroing,
so we report error a bit later for cases, where volume
could not be activated because it doesn't pass through volume
list (but user still could create volume when he disables
zeroing)
Correct return code of activate_lv_excl().
Function is not supposed to return activation state of
activated volume, but return code of the operation.
Since i.e. when activation filter is allowing to activate
volume on current system, it is still success even though
no volume is activated.
MD can directly create partition devices without a need to run
an extra kpartx or partprobe call. We need to react to this event in
a different way as for bare MD devices - we need to handle the ADD event
for KERNEL=="md[0-9]*p[0-9]*" kernel name and trigger the LVM scanning
to update lvmetad to trigger autoactivation and so on...
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1023250
