IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
dev_cache_index_devs() is taking a large amount of time
when there are many PVs. The index keeps track of
devices that are currently in use by active LVs. This
info is used to print warnings for users in some limited
cases.
The checks/warnings that are enabled by the index are not
needed by pvscan --cache, so disable it in this case.
This may be expanded to other cases in future commits.
dev_cache_index_devs should also be improved in another
commit to avoid the extreme delays with many devices.
There have been two separate checks for metadata
validity: first that the metadata text begins with
a valid VG name, and second the checksum of the
metadata text. These happen in different places,
which means there have been two separate error paths
for invalid metadata. This also causes large metadata
to be read in multiple parts, the first part is read
just to check the vgname, and then remaining parts are
read later when the full metadata is needed.
This patch moves the vg name verification so it's
done just before the checksum verification, which
results in a single error path for invalid metadata,
and causes the entire metadata to be read together
rather that in parts from different parts of the code.
If label_scan encounters bad vg metadata, invalidate
bcache data for the device and reread the mda_header
and metadata text back to back. With concurrent commands
modifying large metadata, it's possible that the entire
metadata area can be rewritten in the time between a
command reading the mda_header and reading the metadata
text that the header points to. Since the label_scan
is just assembling an initial overview of devices, it
doesn't use locking to serialize with other commands
that may be modifying the vg metadata at the same time.
Recent commit 84bd394cf9
"writecache: use block size 4096 when no fs is found"
changed the default writecache block size from 512 to 4096
when no file system is detected. The fs block size detection
requires the libblkid BLOCK_SIZE feature, so skip tests on
systems without this. Otherwise, 4096 writecache added to
512 xfs leads fs io or mount failures.
Add profilable configurable setting for vdo pool header size, that is
used as 'extra' empty space at the front and end of vdo-pool device
to avoid having a disk in the system the may have same data is real
vdo LV.
For some conversion cases however we may need to allow using '0' header size.
TODO: in this case we may eventually avoid adding 'linear' mapping layer
in future - but this requires further modification over lvm code base.
In testing where we inject large amounts of additional output in stderr
we can occassionally get truncated stdout from lvm. Catching and dumping
the json for debug before we re-raise the exception. As this doesn't
happen without the error injecting wrapper around lvm, the error seems to
be with the wrapper.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
When exec'ing lvm, it's possible to get large amounts of both stdout
and stderr depending on the state of lvm and the size of the lvm
configuration. If we allow any of the buffers to fill we can end
up deadlocking the process. Ensure we are handling stdout & stderr
during lvm execution.
Ref. https://bugzilla.redhat.com/show_bug.cgi?id=1966636
Signed-off-by: Tony Asleson <tasleson@redhat.com>
When we are walking the new lvm state comparing it to the old state we can
run into an issue where we remove a VG that is no longer present from the
object manager, but is still needed by LVs that are left to be processed.
When we try to process existing LVs to see if their state needs to be
updated, or if they need to be removed, we need to be able to reference the
VG that was associated with it. However, if it's been removed from the
object manager we fail to find it which results in:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/lvmdbusd/utils.py", line 666, in _run
self.rc = self.f(*self.args)
File "/usr/lib/python3.6/site-packages/lvmdbusd/fetch.py", line 36, in _main_thread_load
cache_refresh=False)[1]
File "/usr/lib/python3.6/site-packages/lvmdbusd/lv.py", line 146, in load_lvs
lv_name, object_path, refresh, emit_signal, cache_refresh)
File "/usr/lib/python3.6/site-packages/lvmdbusd/loader.py", line 68, in common
num_changes += dbus_object.refresh(object_state=o)
File "/usr/lib/python3.6/site-packages/lvmdbusd/automatedproperties.py", line 160, in refresh
search = self.lvm_id
File "/usr/lib/python3.6/site-packages/lvmdbusd/lv.py", line 483, in lvm_id
return self.state.lvm_id
File "/usr/lib/python3.6/site-packages/lvmdbusd/lv.py", line 173, in lvm_id
return "%s/%s" % (self.vg_name_lookup(), self.Name)
File "/usr/lib/python3.6/site-packages/lvmdbusd/lv.py", line 169, in vg_name_lookup
return cfg.om.get_object_by_path(self.Vg).Name
Instead of removing objects from the object manager immediately, we will
keep them in a list and remove them once we have processed all of the state.
Ref:
https://bugzilla.redhat.com/show_bug.cgi?id=1968752
When execute IDM testing, the command reports error:
/usr/bin/install: cannot stat ‘lib/idm_inject_failure’: No such file
or directory
Since there have a stale program in my local environment, thus Makefile
always uses the stale program and doesn't report any issue. In the
brand new repository, it doesn't contain an idm_inject_failure program,
and Makefile doesn't build it without specifying the dependency, thus
the test command complaints the file 'idm_inject_failure' is not found.
This patch adds the dependency 'lib/idm_inject_failure' for IDM testing,
so it can firstly build the injection program and dismiss the error.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
When adding a device to the devices file with --adddev, lvm
by default chooses the best device ID type for the new device.
The new --deviceidtype option allows the user to override the
built in preference. This is useful if there's a problem with
the default type, or if a secondary type is preferrable.
If the specified deviceidtype does not produce a device ID,
then lvm falls back to the preference it would otherwise use.
Previously there have been necessary explicit call of backup (often
either forgotten or over-used). With this patch the necessity to
store backup is remember at vg_commit and once the VG is unlocked,
the committed metadata are automatically store in backup file.
This may possibly alter some printed messages from command when the
backup is now taken later.
Instead of calling explicit archive with command processing logic,
move this step towards 1st. vg_write() call, which will automatically
store archive of committed metadata.
This slightly changes some error path where the error in archiving
was detected earlier in the command, while now some on going command
'actions' might have been, but will be simply scratched in case
of error (since even new metadata would not have been even written).
So general effect should be only some command message ordering.
As SUSE build tool reports the warning:
lvmlockd-core.c: In function 'client_thread_main':
lvmlockd-core.c:4959:37: warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size 6 [-Wformat-truncation=]
snprintf(buf, sizeof(buf), "path[%d]", i);
^~
lvmlockd-core.c:4959:31: note: directive argument in the range [0, 2147483647]
snprintf(buf, sizeof(buf), "path[%d]", i);
^~~~~~~~~~
To dismiss the compilation warning, enlarge the array "buf" to 17
bytes to support the max signed integer: string format 6 bytes + signed
integer 10 bytes + terminal char "\0".
Reported-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
This patch is to test timeout handling after activate LV with shareable
mode. It has the same logic with the testing for LV exclusive mode,
except it verifies the locking with shareable mode.
On the host A:
make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdj3,/dev/sdk3,/dev/sdl3 \
LVM_TEST_MULTI_HOST=1 T=multi_hosts_lv_sh_timeout_hosta.sh
On the host B:
make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdj3,/dev/sdk3,/dev/sdl3 \
LVM_TEST_MULTI_HOST=1 T=multi_hosts_lv_sh_timeout_hostb.sh
Signed-off-by: Leo Yan <leo.yan@linaro.org>
This patch is to test timeout handling after activate LV with exclusive
mode. It contains two scripts for host A and host B separately.
The script on host A firstly creates VGs and LVs based on the passed
back devices, every back device is for a dedicated VG and a LV is
created as well in the VG. Afterwards, all LVs are activated by host A,
so host A acquires the lease for these LVs. Then the test is designed
to fail on host A.
After the host A fails, host B starts to run the paired testing script,
it firstly fails to activate the LVs since the locks are leased by
host A; after lease expiration (after 70s), host B can achieve the lease
for LVs and it can operate LVs and VGs.
On the host A:
make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdj3,/dev/sdk3,/dev/sdl3 \
LVM_TEST_MULTI_HOST=1 T=multi_hosts_lv_ex_timeout_hosta.sh
On the host B:
make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdj3,/dev/sdk3,/dev/sdl3 \
LVM_TEST_MULTI_HOST=1 T=multi_hosts_lv_ex_timeout_hostb.sh
Signed-off-by: Leo Yan <leo.yan@linaro.org>
This patch is to add LV testing on multi hosts. There have two scripts,
the script multi_hosts_lv_hosta.sh is used to create LVs on one host,
and the second script multi_hosts_lv_hostb.sh will acquire
global lock and VG lock, and remove VGs. The testing flow verifies the
locking operations between two hosts with lvmlockd and the backend
locking manager.
On the host A:
make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdj3,/dev/sdk3,/dev/sdl3 \
LVM_TEST_MULTI_HOST=1 T=multi_hosts_lv_hosta.sh
On the host B:
make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdj3,/dev/sdk3,/dev/sdl3 \
LVM_TEST_MULTI_HOST=1 T=multi_hosts_lv_hostb.sh
Signed-off-by: Leo Yan <leo.yan@linaro.org>
This patch is to add VG testing on multi hosts. There have two scripts,
the script multi_hosts_vg_hosta.sh is used to create VGs on one host,
and the second script multi_hosts_vg_hostb.sh afterwards will acquire
global lock and VG lock, and remove VGs. The testing flow verifies the
locking operations between two hosts with lvmlockd and the backend
locking manager.
On the host A:
make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdj3,/dev/sdk3,/dev/sdl3 \
LVM_TEST_MULTI_HOST=1 T=multi_hosts_vg_hosta.sh
On the host B:
make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdj3,/dev/sdk3,/dev/sdl3 \
LVM_TEST_MULTI_HOST=1 T=multi_hosts_vg_hostb.sh
Signed-off-by: Leo Yan <leo.yan@linaro.org>
If the IDM lock manager fails to access drives, might partially fail to
access drives (e.g. it fails to access one of three drives), or totally
fail to access drives, the lock manager should handle properly for these
cases. When the drives are partially failure, if the lock manager still
can renew the lease for the locking, then it doesn't need to take any
action for the drive failure; otherwise, if it detects it cannot renew
the locking majority, it needs ti immediately kill the VG from the
lvmlockd.
This patch adds the test for verification the IDM lock manager failure;
the command can be used as below:
# make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdp3,/dev/sdl3,/dev/sdq3 \
LVM_TEST_FAILURE=1 T=idm_ilm_failure.sh
Signed-off-by: Leo Yan <leo.yan@linaro.org>
If the fabric is broken instantly and the partial drives connected on
the fabric disappear from the system. For this case, according to the
locking algorithm in idm, the lease will not lose since the half drives
are still alive so can renew the lease for the half drives. On the
other hand, since the VG lock requires to acquire the majority of drive
number, but half drives failure cannot achieve the majority, so it
cannot acquire the lock for VG and thus cannot change metadata for VG.
This patch is to add half brain failure for idm; the test command is as
below:
# make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdp3,/dev/sdo3 LVM_TEST_FAILURE=1 \
T=idm_fabric_failure_half_brain.sh
Signed-off-by: Leo Yan <leo.yan@linaro.org>
If the fabric is broken instantly, the drives connected on the fabric
will disappear from the system. For worst case, the lease is timeout
and the drives cannot recovery back. So a new test is added to emulate
this scenario, it uses a drive for LVM operations and this drive is also
used for locking scheme; if the drive and all its associated paths (if
the drive supports multiple paths) are disconnected, the lock manager
should stop the lockspace for the VG/LVs.
And afterwards, if the drive recovers back, the VG/LV resident in the
drive should be operated properly. The test command is as below:
# make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdp3 LVM_TEST_FAILURE=1 \
T=idm_fabric_failure_timeout.sh
Signed-off-by: Leo Yan <leo.yan@linaro.org>
When the fabric failure occurs, it will lose the connection with hosts
instantly, and after a while it can recovery back so that the hosts can
continue to access the drives.
For this case, the locking manager should be reliable for this case and
can dynamically handle this case and allows user to continue to use the
VG/LV with associated locking scheme.
This patch adds a testing to emulate the fabric faliure, verify LVM
commands for this case. The testing usage is:
# make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdo3,/dev/sdp3,/dev/sdp4 \
LVM_TEST_FAILURE=1 T=idm_fabric_failure.sh
Signed-off-by: Leo Yan <leo.yan@linaro.org>
After the lvmlockd abnormally exits and relaunch the daemon, if LVM
commands continue to run, lvmlockd and the backend lock manager (e.g.
sanlock lock manager or IDM lock manager) should can continue to serve
the requests from LVM commands.
This patch adds a test to emulate lvmlockd failure, and verify the LVM
commands after lvmlockd recovers back. Below is an example for testing
the case:
# make check_lvmlockd_idm \
LVM_TEST_BACKING_DEVICE=/dev/sdo3,/dev/sdp3,/dev/sdp4 \
LVM_TEST_FAILURE=1 T=lvmlockd_failure.sh
Signed-off-by: Leo Yan <leo.yan@linaro.org>
When the drive failure occurs, the IDM lock manager and lvmlockd should
handle this case properly. E.g. when the IDM lock manager detects the
lease renewal failure caused by I/O errors, it should invoke the kill
path which is predefined by lvmlockd, so that the kill path program
(like lvmlockctl) can send requests to lvmlockd to stop and drop lock
for the relevant VG/LVs.
To verify the failure handling flow, this patch introduces an idm
failure injection program, it can input the "percentage" for drive
failures so that can emulate different failure cases.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
This patch is to add the stress testing, which launches three threads,
one thread is for creating/removing PV, one thread is for
creating/removing VG, and the last one thread is for LV operations.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
This patch is to add the stress testing, which launches two threads,
each thread creates LV, activate and deactivate LV in the loop; so this
can test for multi-threading in lvmlockd and its backend lock manager.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
This patch is to add the stress testing, which loops to create LV,
activate and deactivate LV in the single thread.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
