IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Correction for aux test result ([] -> if;then;fi)
Use issue_discard to lower memory demands on discardable test devices
Use large devices directly through prepare_pvs
I'm still observing more then 0.5G of data usage through.
Particullary:
'lvcreate' followed by 'lvconvert' (which doesn't yet support --nosync
option) is quite demanging, and resume returns quite 'late' when
a lot of data has been already written on PV.
Reinstantiate reporting of metadata percent usage for cache volumes.
Also show the same percentage with hidden cache-pool LV.
This regression was caused by optimization for a single-ioctl in
2.02.155.
Allow RAID scrubbing on cache origin sub-LV
This patch adds the ability to perform RAID scrubbing on the cache
origin sub-LV (https://bugzilla.redhat.com/1169495). Cache origin
operations are restricted to non-clustered RAID LVs until there can
be further testing in a cluster (even for exclusive activation).
User can either specify directly _corig LV
or he can specify cache LV and operation --syncation is
passed ONLY to _corig LV.
If users wants to manipulation with cache-pool devices - he
needs to specify this object name.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Introduce 'hard limit' for max number of cache chunks.
When cache target operates with too many chunks (>10e6).
When user is aware of related possible troubles he
may increase the limit in lvm.conf.
Also verbosely inform user about possible solution.
Code works for both lvcreate and lvconvert.
Lvconvert fully supports change of chunk_size when caching LV
(and validates for compatible settings).
'pvmove -n name pv1 pv2' called with the name of a top-level LV
failed with mentioned commit.
Enhance pvmove-raid-segtypes.sh to test for prohibited RAID SubLV moves.
RAID6 LVs may not be created with --nosync or data corruption
may occur in case of device failures. The underlying MD raid6
personality used to drive the RaidLV performs read-modify-write
updates on stripes and thus relies on properly written parity
(P and Q Syndromes) during initial synchronization.
Once on it, enhance test to create/extend more and
larger RaidLVs and check sync/nosync status.
Commit 76ef2d15d8 introduced
raid0 <-> raid4 takeover and full mirror <-> raid1 support.
Add tests for these conversions.
Tests exposed a kernel semantics change freezing resynchronization
on conversions from raid0[_meta] -> raid4 or adding raid1 legs
because kernel kept the RAID mapped device in 'frozen' state unless
an 'idle' message was sent or the table was reloaded (kernel patch pending).
The MD raid6 personality being used to drive lvm raid6 LVs does
read-modify-write updates to any stripes and thus relies on correct
P and Q Syndromes being written during initial synchronization or
it may fail reconstructing proper user data in case of SubLVs failing.
We may not allow the '--nosync' option on
creation of raid6 LVs for that reason.
Update/fix 'man lvcreate' in that regard.
add lvcreate-raid-nosync.sh test script.
- Resolves rhbz1358532
This patch fixes link validation for used thin-pool.
Udev rules correctly creates symlinks only for unused new thin-pool.
Such thin-pool can be used by foreing apps (like Docker) thus
has /dev/vg/lv link.
However when thin-pool becomes used by thinLV - this link is no
longer exposed to user - but internal verfication missed this
and caused messages like this to be printed upon 'vgchange -ay':
The link /dev/vg/pool should have been created by udev but it was not
found. Falling back to direct link creation.
And same with 'vgchange -an':
The link /dev/vg/pool should have been removed by udev but it is still
present. Falling back to direct link removal.
This patch ensures only unused thin-pool has this link.
Add new logic to identify each unique operation and route
it to the correct function to perform it. The functions
that perform the conversions remain unchanged.
This new code checks every allowed combination of LV type
and requested operation, and for each valid combination
calls the function that performs that conversion.
The first stage of option validation which checks for
incompatible combinations of command line options, is done
done before process_each is called. This is unchanged.
(This new code will allow that first stage validation to
be simplified in a future commit.)
The second stage of checking options against the specific
LV type is done by this new code. For each valid combination
of operation + LV type, the new code calls an existing
function that implements it.
With this in place, the ad hoc checks for valid combinations
of LV types and operations can be removed from the existing
code in a future commit.
(The #if 0 is used to keep the patch clean, and the
disabled code will be removed by a following patch.)
This refactors the code for autoactivation. Previously,
as each PV was found, it would be sent to lvmetad, and
the VG would be autoactivated using a non-standard VG
processing function (the "activation_handler") called via
a function pointer from within the lvmetad notification path.
Now, any scanning that the command needs to do (scanning
only the named device args, or scanning all devices when
there are no args), is done first, before any activation
is attempted. During the scans, the VG names are saved.
After scanning is complete, process_each_vg is used to do
autoactivation of the saved VG names. This makes pvscan
activation much more similar to activation done with
vgchange or lvchange.
The separate autoactivate phase also means that if lvmetad
is disabled (either before or during the scan), the command
can continue with the activation step by simply not using
lvmetad and reverting to disk scanning to do the
activation.
Add support for active cache LV.
Handle --cachemode args validation during command line processing.
Rework some lvm2 internal to use lvm2 defined CACHE_MODE enums
indepently on libdm defines and use enum around the code instead
of passing and comparing strings.
The test was a weak attempt at verifying the special
combination of lvchange/vgchange -aay --sysinit, but
was only looking for lvmetad connection warnings.
Update the warning checks, and check the LV activation
state directly which is the main point.
Rename the test to reflect its purpose of checking
the -aay --sysinit combination.
Update the check about lvmetad running but not used.
Also add tests related to the new lvmetad disabled state.
lvm1 metadata is used here to test the disabled state
because lvm1 metadata is the first condition using the
disabled state.
Improved test script to verify lost mirror image does not
cause mirror corruption while mirror is in use.
TODO: add more cases (lost mlog...), lost image from 3leg mirror...
Using lvm1 metadata with lvmetad is not generally allowed,
but nothing has prevented creating new lvm1 metadata with
lvmetad (missing error checking in pvcreate/vgcreate.)
Various tests are using lvm1 with lvmetad and happen to
work because of the missing error checks.
This commit fixes the tests so they won't fail when the
lvm1/lvmetad error checking is fixed. A new variable
LVM_TEST_LVM1 is defined and is used in the scripts to
decide if lvm1 metadata should be tested. LVM_TEST_LVM1
is not defined when lvmetad is being tested, and the
combination of LVM_TEST_LVM1 and LVM_TEST_LVMETAD can
be used to verify the desired lvmetad+lvm1 behavior.
Showing 'u' in the pv_attr reporting field is mostly unnecessary because
most PVs are allocatable, and being allocatable implies it is (u)sed,
and this is already obvious from other fields in the default 'pvs'
output like the VG name.
So move the new (u)sed pv_attr from character position 4 to 1, and only
show it in those rare cases when the PV is not (a)llocatable or the
relevant metadata is missing.
(Scripts should not be using pv_attr, but rather pv_allocatable,
pv_exported, pv_missing, pv_in_use etc.)
Add tests for the "dmstats report" command:
* report
* report --count
* report --histogram
So far the tests just check the command runs as expected when a
correctly configured stats region exists: validation of output
can be added later.
Add tests for the "dmstats create" command:
* simple whole-device region
* region using --start/--len options
* region using --segments option
* region with precise timestamps (--precise)
* region with histogram bounds (--bounds)
Add initial dmstats tests to 000-basic.sh. These tests ensure that
the dmsetup binary is built and linked correctly when called as
'dmstats' and that the version of the binary matches the expected
library version used for the build.
Ask for confirmation when using pvcreate/pvremove on a PV which is
marked as belonging to a VG, just like we do in case of a PV which
belongs to known VG:
$ pvcreate -ff /dev/sda
Really INITIALIZE physical volume "/dev/sda" that is marked as belonging to a VG [y/n]? n
/dev/sda: physical volume not initialized
$ pvremove -ff /dev/sda
Really WIPE LABELS from physical volume "/dev/sda" that is marked as belonging to a VG [y/n]? n
/dev/sda: physical volume label not removed
There are two basic groups of fields for LV segment device reporting:
- related to LV segment's devices: devices and seg_pe_ranges
- related to LV segment's metadata devices: metadata_devices and seg_metadata_le_ranges
The devices and metadata_devices report devices in this format:
"device_name(extent_start)"
The seg_pe_ranges and seg_metadata_le_ranges report devices in
this format:
"device_name:extent_start-extent_end"
This patch reverts partly what commit 7f74a99502
(v 2.02.140) introduced in this area - it added [] for
hidden devices to mark them for all four fields mentioned above.
We won't be marking hidden devices in devices and metadata_devices
fields.
The seg_metadata_le_ranges field will have hidden devices marked -
it's new enough that we don't need to care about compatibility much
yet.
The seg_pe_ranges is old enough that we shouldn't be changing this
one - so we're reverting to not marking hidden devices here.
Instead, there's going to be a new field "seg_le_ranges" which
is going to replace the seg_pe_ranges and it will mark hidden devices -
this is going to be introduced in a patch later.
So in the end we'll end up with:
(LV segment's devices)
devices field with "device_name(extent_start)" format, not marking hidden devices
seg_pe_ranges field with "device_name:extent_start-extent_end" format, not marking hidden devices (deprecated, new seg_le_ranges should be used instead for standardized format)
seg_le_ranges field with "device_name:extent_start-extent_end" format, marking hidden devices
(LV segment's metadata devices)
metadata_devices field with "device_name:extent_start-extent_end" format, not marking hidden devices
seg_metadata_le_ranges field with "device_name:extent_start-extent_end" format, marking hidden devices
Also, both seg_le_ranges and seg_metadata_le_ranges will honour the
report/list_item_separator setting which can be used to configure
the delimiter used for list items.
So, to sum it up, we will recommend using the new seg_le_ranges and
seg_metadata_le_ranges fields because they display devices with
standard extent range format, they can mark hidden devices and they
honour the report/list_item_separator setting.
We'll be keeping devices,seg_pe_ranges and metadata_devices fields
for compatibility.
Thin pool discard mode set in metadata can be different from the one
actually used if any device underneath does not support that mode. Add
kernel_discard report field to make it possible to see this difference.
To handle multiple VGs with the same name.
Simply using the VG name is ambiguous, and
lvmetad requires the VG uuid be used to
specify which one is meant.
When reading older lvm2 metadata for cache-pool - we now handle more
extended syntax - basically we want to enter most setting when
actually creating cached LV.
For this new validation code has been added. However older metadata
without new settings set is now found as invalid.
Fix it by adding default settings for cache policy mq
and cache mode writethrough.
Use delay_dev to slow down mirror sync so we could more
easily check for race and proper reject of parallel mirror
leg addition/reduction.
Also expose fail in mirror allocation of parallel leg.
If two PVs have different VGs with the same name
(different uuids), one of the VGs is ignored by
lvmetad. A FIXME exists in lvmetad to find a
better response.
Drop already tested 'threshold & create' which is in
lvextend-thin-full.sh
Count with now match faster 'dmeventd' wakeup on watermark
as it's now nearly instant after crossing threshold value.
If the underlaying device has actually bigger read-ahead settings,
let it pass.
But anyway switch to 512 strip-size to get really high R-A sector count.
