IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
to a file using log/file, with log/overwrite set and dump this file in
STACKTRACE. The overall effect is that only the command that ran last before
the failure has been triggered will get its debug output logged. This is
similar to how we treat coredumps.
lvconvert testing is now in its own test, t-lvconvert-mirror-basic ... it
doesn't do anything fancy but it does run lvconvert through a lot of
combinations.
I have also merged the remaining t-mirror-lvconvert tests into
t-lvconvert-mirror and abolished the former. The latter will be split again
later into more thematic divisions. (The previous split was rather arbitrary,
may I even say random...)
fails, the test will carry on but will issue a warning. The harness detects
such warnings from tests and marks tests that passed with warnings with a
special status.
is active and while it is in-active.
+for i in $(seq 0 4); do
+ for j in $(seq 0 4); do
+ for k in core disk mirrored; do
+ for l in core disk mirrored; do
The testing code still needs some improvement. I'd like to add
the ability to test specifying the PVs to be added/removed during
a convert. It will also be important to test partial PV
specification during down converts (i.e. request to remove more
mirror images than we have provided PVs for).
Allow lv_remove_with_dependencies() to know the top-level LV that was
requested to be removed (otherwise it recurses and we lose context).
A merging snapshot cannot be removed directly but the associated origin
can be. Disallow removal of a merging snapshot unless the associated
origin is also being removed.
1) Test that the primary mirror image cannot be removed while
the mirror set is sync'ing.
2) Test that you cannot start a second mirror up-convert while
one is already in progress.
The trouble is that if the sync/conversion finishes before the
tests occur, the tests will fail by why of success where there
should have been failure. This means the sync/conversion must
happen very quickly, but this is possible because the test
mirrors we are creating are so small.
In order to decrease the likelyhood of these test failing (or
more correctly, failing to test the right thing), I've increase
the size of the mirrors. It will still be remotely possible that
the tests will fail (by way of failing to test the right thing).
If this continues to happen, more involved mechanisms will need
to be put in place. (Perhaps these will still be created, but
this change should be a remedy until that time.)
Reintroduce split teardown (teardown() calls teardown_devs()) because
t-topology-support.sh only needs the teardown_devs() subset of the full
teardown() between each iteration of the topology tests -- in particular
the $TESTDIR must not get removed between each topology test iteration.
prepare_loop() must return if prepare_scsi_debug_dev() already
established $LOOP.
Also fix (and simplify) the unsafe scsi-debug device discovery in
prepare_scsi_debug_dev().
Ensure we can create devices for use in tests before running the real
tests. This may in various cases, and may involve machine configuration
rather than a failure in some specific test.
For example, if a test is run with LVM_TEST_DIR=/tmp, selinux is enabled,
and the default security context is set to "<<none>>" for /tmp, all the
tests will fail, unable to create devices, since dmsetup will fail, a
result of machpathcon() returning an error code.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Patch is inspired by Debian's extra patch.
- removes OWNER & GROUP make vars they are parts of INSTALL command.
- adds INSTALL_PROGRAM for executable, uses $(INSTALL)
- adds INSTALL_DATA for non-executable data, uses ($INSTALL)
- adds INSTALL_WDATA for writable non-executable data, uses ($INSTALL)
- adds configure option --enable-write_install - to support
installatin of writable files used by distribution
- replaces usage of ifeq @LIB_SUFFIX@ with $(LIB_SUFFIX)
- installs .a files from static builds without executable flag
- installs .a files to $(usrlibdir) instead of $(libdir)
- installs all static binaries to $(staticdir)
- create .so links for devel package in $(usrlibdir) instead of
$(libdir)
- makes .so and .so.LIB_VERSION files within builddir
- removes VERSIONED_SHLIB and created versioned LIB_SHARED automagicaly
- install LIB_SHARED via install_lib_shared target
- install plugins via install_lib_shared_plugin target
- prints whole 'install' command during installation instead of less
informative "Installing $(something) $(somewhere)"
- install multiple man pages with one INSTALL command
- use DISTCLEAN_TARGETS instead of creating multiple distclean targets
Usage of VPATH makes troubles when used within $(builddir).
Not only source files are being found through VPATH,
but targets as well. (make --debug=v)
Thus if user builds the code in $(srcdir) and also in some $(builddir)
he gets mangled results as some generated files (i.e. .export.sym)
are 'reused' from $(srcdir) instead of $(builddir).
This patch switches to use vpath were we could explicitly name
suffixes that should be looked via vpath - we must take care,
we do not generate files with these suffixes:
.c, .in, .po, .exported_symbols
we are running the repair manually. If we don't ignore, then dmeventd
and the manually run repair can collide. (We should still get clean
results in such a case, but it makes it harder to validate the test
results.)
in clvmd, dmevend, man, tests.
Don't include dependency files for clow and cscope.out targets
Improve dependency tracking for dmeventd and liblvm2cmd sources.
This check-in enables the 'mirrored' log type. It can be specified
by using the '--mirrorlog' option as follows:
#> lvcreate -m1 --mirrorlog mirrored -L 5G -n lv vg
I've also included a couple updates to the testsuite. These updates
include tests for the new log type, and some fixes to some of the
*lvconvert* tests.
If user try to vgcreate or vgextend non-existent VG,
these messages appears:
# vgcreate xxx /dev/xxx
Internal error: Volume Group xxx was not unlocked
Device /dev/xxx not found (or ignored by filtering).
Unable to add physical volume '/dev/xxx' to volume group 'xxx'.
Internal error: Attempt to unlock unlocked VG xxx.
(the same with existing VG and non-existing PV & vgextend)
# vgextend vg_test /dev/xxx
...
It is caused because code tries to "refresh" cache if
md filter is switched on using cache destroy.
But we can change filters and rescan even without this
machinery now, just use refresh_filters
(and reset md filter afterwards).
(Patch also discovers cache alias bug in vgsplit test,
fix it by using better filter line.)
Create new substituted variable PTHREAD_LIBS and link this library
only with tools/libs which really needs it - i.e. dmeventd.
Check for libpthread only for builds with clvmd or dmeventd.
Remove variable LIB_PTHREAD
Switch lvconvert's --merge code over to using process_each_lv(). Doing
so adds support for a single 'lvconvert --merge' to start merging
multiple LVs (which includes @tag expansion).
Add 'lvconvert --merge @tag' testing to test/t-snapshot-merge.sh
Adjust man/lvconvert.8.in to reflect these expanded capabilities.
The lvconvert.c implementation requires rereading the VG each iteration
of process_each_lv(). Otherwise a stale VG instance associated with
the LV passed to lvconvert_single_merge() would result in stale VG
metadata being written back out to disk. This overwrote new metadata
that was written when a previous snapshot LV finished merging (via
lvconvert_poll). This is only an issue when merging multiple LVs that
share the same VG (a single VG is typical for most LVM configurations on
system disks).
In the end this new support is very useful for performing a "system
rollback" that requires multiple snapshot LVs be merged to their
respective origin LV.
The yum-utils 'fs-snapshot' plugin tags all snapshot LVs that it creates
with a common 'snapshot_tag' that is unique to the yum transaction.
Rolling back a yum transaction, that created LVM snapshots with the tag
'yum_20100129133223', is as simple as:
lvconvert --merge @yum_20100129133223
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Support "wait before testing" using '+' in pvmove and lvconvert
interval. Doing so overrides the new default of sleeping after checking
the LV's progress.
Sleeping before checking progress can lead to extraneous polldaemons
being left running. These polldaemons would have otherwise exited had
they checked before sleeping. Checking progress before sleeping helps
workaround the subtly unreliable nature of "finished" state checking
in _percent_run.
Update test/t-mirror-names.sh to use '+' when providing its lvconvert
interval.
LVM2 test (rather than using the traditional loop device).
prepare_scsi_debug_dev currently assumes exclussive access to the
scsi_debug module. Any script that tries to use prepare_scsi_debug_dev
when scsi_debug is unavailable or already loaded into the kernel will be
skipped.
t-topology-support.sh shows how prepare_scsi_debug_dev function can be
used repeatedly (within a script) to test LVM2 ontop of a ramdisk-based
SCSI device w/ arbitrary scsi_debug features.
isn't already available (in /proc/mdstat).
switch to requiring 2.6.33 for the alignment_offset tests; 2.6.{31,32}
alignment_offset values aren't reliable. 2.6.33 _should_ have mkp's
alignment_offset fixes but so far it doesn't (as of 2.6.33-rc4).
