IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The dm devs cache is separate from the ordinary dev cache,
so give the function names distinct prefixes, using
"dm_devs_cache" to prefix dm devs cache functions.
The list of dm devs was in the cmd struct and had a
different lifetime than the radix trees referencing
those dm devs. Now the list and radix trees are
created and destroyed together.
vgchange -an vg is permitted when the vg lockspace
is not available, because LVs could still be active
for some reason, and they should be inactive when not
properly locked. In case lvmlockd was not running, or
the lockspace was not started, the command was
unnecessarily trying and failing to unlock every LV,
printing errors for every LV. We can skip this when
the lockspace is known to not be available.
Lock adoption is not part of standard command behavior, but can
be used for manual recovery or cleanup from unexpected failure
cases. Like other lockopt values, they are hidden options for
--lockopt. Different lock managers will behave differently.
Adopting locks with lvmlockd -A1 is more accurate and automatic.
--lockopt adoptls
. for vgchange --lockstart
. adopt existing ls, or fail if no existing lockspace is found
--lockopt adoptgl | adoptvg | adoptlv
. for commands using lvmlockd locks
. adopt orphan gl/vg/lv lock, or fail the lock request if
no orphan lock is found
. will fail if orphan lock exists with a different lock mode
. command may still continue with a failed shared lock request
--lockopt adopt
. for lockstart or any command using lvmlockd locks
. adopt existing lockspace, or start lockspace if none exists
. adopt orphan gl/vg/lv lock, or acquire new lock if no orphan found
. will fail if orphan lock exists with a different lock mode
. command may still continue with a failed shared lock request
. with dlm this option only works for ls
Stop printing "Skipping global lock: lockspace not found or started"
for vgchange --lockstart, since it's generally an inherent limitation
that the global lock isn't available until after locking is started.
Update the start delay warning to "a few seconds".
The lvb is used to hold lock versions, but lock verions are
no longer used (since the removal of lvmetad), so the lvb
is not actually useful. Disable their use for sanlock to
avoid the extra i/o required to maintain the lvb.
vgremove with --lockopt force should skip lvmlockd-related
steps and allow a forced vg cleanup, in addition to using
--nolocking to skip normal locking calls.
Previously, a command would call lockd_vg() for a local VG,
which would go to lvmlockd, which would send back ENOLS,
and the command would not care when it saw the VG was local.
The pointless back-and-forth to lvmlockd for local VGs can
be avoided by checking the VG lock_type in lvmcache (which
label_scan now saves there; this wasn't the case back when
the original lockd_vg logic was added.) If the lock_type
saved during label_scan indicates a local VG, then the
lockd_vg step is skipped.
Set the lock_args string in addition to doing initialization.
lvconvert calls lockd_init_lv_args() directly, skipping
the normal lockd_init_lv() which usually sets lock_args.
Cover a case missed by the recent commit e0ea0706d
"report: query lvmlockd for lv_active_exclusively"
Fix the lv_active_exclusively value reported for thin LVs.
It's the thin pool that is locked in lvmlockd, and the thin
LV state was mistakenly being queried and not found.
Certain LV types like thin can only be activated exclusively, so
always report lv_active_exclusively true for these when active.
Query LV lock state in lvmlockd to report lv_active_exclusively
for active LVs in a shared VGs. As with all lvmlockd state,
it is from the perspective of the local node.
Signed-off-by: corubba <corubba@gmx.de>
The number of extents for the sanlock lvmlock lv is calculated using
integer division, which rounds towards zero. With a physical extent size
of 129M, instead of the requested 256M the lv is only 129M (1 extent).
With any physical extent size greater than 256M the lv creation fails
because the number of extents is zero.
This is fixed by replacing the integer division with a division macro
that rounds up and thus guarantees that the size of the lv will always
be equal or greater than the requested size. Using the examples above, a
pes of 129M will result in a 258M lv (2 extents), pes of 300M in a 300M
lv (1 extent).
The re-calculation of the lv size in bytes and megabytes is only so the
debug output shows the correct values. The size in mb there is still
not byte-perfect-accurate, but good enough for a human-readable estimate;
and the exact size in bytes and extents is right next to it.
Signed-off-by: corubba <corubba@gmx.de>
Names matching internal code layout.
Functionc in thin_manip.c uses thin_pool in its name.
Keep 'pool' only for function working for both cache and thin pools.
No change of functionality.
dev_name(dev) returns "[unknown]" if there are no names
on dev->aliases. It's meant mainly for log messages.
Many places assume a valid path name is returned, and
use it directly. A caller that wants to use the path
from dev_name() must first check if the dev has any
paths with dm_list_empty(&dev->aliases).
Since we check for present DM devices - cache result for
futher use of checking presence of such device.
lvm2 uses cache result for label scan, but also when
it tries to activate or deactivate LV - however only simple
target 'striped' is reasonably supported.
Use disable_dm_devs to be able to control when lv_info()
get cache or uncached results.
TODO: support more type, however this is getting very complicated.
Error path in _lockd_retrive_vg_pv_list() has not zeroed released path
caussing possible double-free later in the code.
Fix it by using one single function freeing lock_pvs structure.
Previously there have been necessary explicit call of backup (often
either forgotten or over-used). With this patch the necessity to
store backup is remember at vg_commit and once the VG is unlocked,
the committed metadata are automatically store in backup file.
This may possibly alter some printed messages from command when the
backup is now taken later.
For shared VG or LV locking, IDM locking scheme needs to use the PV
list assocated with VG or LV for sending SCSI commands, thus it requires
to use some places to generate PV list.
In reviewing the flow for LVM commands, the best place to generate PV
list is in the locking lib. So this is why this patch parses PV list as
shown. It iterates over all the PV nodes one by one, and compare with
the VG name or LV prefix string. If any PV matches, then the PV is
added into the PV list. Finally the PV list is sent to lvmlockd daemon.
Here as mentioned, it compares LV prefix string with the format
"lv_name_", the reason is it needs to find out all relevant PVs, e.g.
for the thin pool, it has LVs for metadata, pool, error, and raw LV, so
we can use the prefix string to find out all PVs belonging to the thin
pool.
For the global lock, it's not covered in this patch. To avoid the egg
and chicken issue, we need to prepare the global lock ahead before any
locking can be used. So the global lock's PV list is established in
lvmlockd daemon by iterating all drives with partition labeled with
"propeller".
Signed-off-by: Leo Yan <leo.yan@linaro.org>
We can consider the drive firmware a server to handle the locking
request from nodes, this essentially is a client-server model.
DLM uses the kernel as a central place to manage locks, so it also
complies with client-server model for locking operations. This is
why IDM and DLM are similar with each other for their wrappers.
This patch largely works by generalizing the DLM code paths and then
providing degeneralized functions as wrappers for both IDM and DLM.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
During removal of a lot of locking code the signal blocking got lost
and signal processing got broken leading to unpredictable
behavior of i.e. activation code the can get interrupted in the
middle of DM table processing.
lvm2 code always expects signals are blocked while lock is held
unless it is explictelly placed into section of:
sigint_allow();....;sigint_restore();
For checking catched interrupt there is sigint_catched();
When either logical block size or physical block size is 4K,
then lvmlockd creates sanlock leases based on 4K sectors,
but the lvm client side would create the internal lvmlock LV
based on the first logical block size it saw in the VG,
which could be 512. This could cause the lvmlock LV to be
too small to hold all the sanlock leases. Make the lvm client
side use the same sizing logic as lvmlockd.
Creating a snapshot was using a persistent LV lock
on the origin, so if the origin LV was inactive at
the time of the snapshot the LV lock would remain.
(Running lvchange -an on the inactive LV would
clear the LV lock.) Use a transient LV lock so it
will be dropped if it was not locked previously.
When pvcreate/pvremove prompt the user, they first release
the global lock, then acquire it again after the prompt,
to avoid blocking other commands while waiting for a user
response. This release/reacquire changes the locking
order with respect to the hints flock (and potentially other
locks). So, to avoid deadlock, use a nonblocking request
when reacquiring the global lock.
When a cachevol LV is attached, have the LV keep it's lock
allocated. The lock on the cachevol won't be used while
it's attached. When the cachevol is split a new lock does
not need to be allocated. (Applies to cachevol usage by
both dm-cache and dm-writecache.)
If a VG is forcibly changed from lock_type sanlock to
lock_type none, the internal lvmlock LV is left behind.
If that LV is not removed before vgremove is run on the
VG, then an internal check will be triggered by the
hidden lvmlock LV. So, check for and remove a left over
lvmlock LV during vgremove.
These two flags may be not reset at the end of
the command when the unlock is implicit, which
is a problem if the cmd struct is reused.
Clear the flags in the general fin_locking.
