IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Since we already check in few other places 'info' is not NULL,
do the same for others - however when info would be NULL
it more or less looks like internal error.
This reverts e28e22b9e1
The problem that that commit was fixing (pytest failure)
no longer appears with the current code, so the commit is
not needed.
That commit is a problem for pvchange, because it prevents
lvmcache from retaining VG metadata even while the global
lock is held. pvchange holds the global lock to ensure
that VG metadata is kept in lvmcache throughout processing.
If the cache is not kept, a PV with zero MDAs will appear
first in its actual VG and then appear again in the orphan VG.
It wrongly appears a second time in the orphan VG only if
the actual VG is dropped from lvmcache.
Use process_each_vg() to lock and read the old VG,
and then call the main vgrename code.
When real VG names are used (not a UUID in place of the
old name), the command still pre-locks the new name
(when strcmp wants it locked first), before calling
process_each_vg on the old name.
In the case where the old name is replaced with a UUID,
process_each_vg now translates that UUID into the real
VG name, which it locks and reads. In this case, we
cannot do pre-locking to maintain lock ordering because
the old name is unknown. So, in this case the strcmp
based lock ordering is suppressed and the old name is
always locked first. This opens a remote chance for
lock ordering conflict between racing vgrenames between
two names where one or both commands use the UUID.
Before commit c1f246fedf,
_get_all_devices() did a full device scan before
get_vgnameids() was called. The full scan in
_get_all_devices() is from calling dev_iter_create(f, 1).
The '1' arg forces a full scan.
By doing a full scan in _get_all_devices(), new devices
were added to dev-cache before get_vgnameids() began
scanning labels. So, labels would be read from new devices.
(e.g. by the first 'pvs' command after the new device appeared.)
After that commit, _get_all_devices() was called
after get_vgnameids() was finished scanning labels.
So, new devices would be missed while scanning labels.
When _get_all_devices() saw the new devices (after
labels were scanned), those devices were added to
the .cache file. This meant that the second 'pvs'
command would see the devices because they would be
in .cache.
Now, the full device scan is factored out of
_get_all_devices() and called by itself at the
start of the command so that new devices will
be known before get_vgnameids() scans labels.
When two different VGs with the same name exist,
they are both stored in lvmcache using the vginfo->next
list. Previously, the code would print warnings (sometimes)
when adding VGs to this list. Now the duplicate VG names
are handled by higher level code, so this list no longer
needs to print warnings about duplicate VG names being found.
After recent changes to process_each, vg_read() is usually
given both the vgname and vgid for the intended VG.
However, in some cases vg_read() is given a vgid with
no vgname, or is given a vgname with no vgid.
When given a vgid with no vgname, vg_read() uses lvmcache
to look up the vgname using the vgid. If the vgname is
not found, vg_read() fails.
When given a vgname with no vgid, vg_read() should also
use lvmcache to look up the vgid using the vgname.
If the vgid is not found, vg_read() fails.
If the lvmcache lookup finds multiple vgids for the
vgname, then the lookup fails, causing vg_read() to fail
because the intended VG is uncertain.
Usually, both vgname and vgid for the intended VG are passed
to vg_read(), which means the lvmcache translations
between vgname and vgid are not done.
When not using lvmetad, this uses the system_id field in
the cached vginfo structs that are populated during a scan.
When using lvmetad, this requests the VG from lvmetad, and
checks the system_id field in the returned metadata.
When the command already knows both the vgid and vgname,
it should send both to lvmetad for a more exact request,
and it can save lvmetad the work of a name lookup.
Use 'mda' instead of NULL to quite Coverity warn.
However this code seems to be actually not even possible to hit.
With proper analysis it may possibly be dropped from code to
simplify logic.
When the command gets a list of alternate devices
from lvmetad, log each one directly. This is not
the same as the warnings when adding lvmcache,
which are related to which duplicate is preferred.
When lvmetad is used and lvmcache update function (lvmcache_update_vgname_and_id)
was called to update existing lvmcache records, a condition was met
which made to retun from the update function immediately, effectively
making it NOOP.
It seems there's no reason for such condition and lvmcache should be
update appropriately even when lvmetad used as lvmcache may be reused,
most notably in lvm shell.
It's possible this is a remnant of the lvmetad development code which
didn't get removed for some reason and the bug didn't get spotted
because lvm shell is not used often (the condition dates back to 2012
or so).
Example, lvmetad and lvm shell used:
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/sda vg lvm2 a-- 124.00m 124.00m
Before this patch:
==================
lvm> vgremove vg
Volume group "vg" successfully removed
lvm> pvs
With this patch applied:
========================
lvm> vgremove vg
Volume group "vg" successfully removed
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/sda lvm2 --- 128.00m 128.00m
The old code made two loops through the PVs: in the first
loop it found the max PV and VG name lengths, and in the
second loop it printed each PV using the name lengths as
field widths for aligning columns.
The new code uses process_each_pv() which makes one loop
through the PVs. In the *first* call to pvscan_single(),
the max name lengths are found by looping through the
lvmcache entries which have been populated by the generic
process_each code prior to calling any _single functions.
Subsequent calls to pvscan_single() reuse the max lengths
that were found by the first call.
If lvmlockd is running, lvmetad is configured (use_lvmetad=1),
but lvmetad is not running, then commands will seg fault
when trying to send a message to lvmetad.
The difference is lvmetad being "active", not just "used".
When lvmetad_pvscan_vg() reads VG metadata from each PV,
it compares it to the last one to verify it matches.
If the VG metadata does not match on the PVs, an error
is printed and it fails to read the VG. In this error
case, use log_debug to show the differences between
the two unmatching copies of the metadata.
One host changes a VG, making the cached VG on another
host invalid. The other host then rereads the VG from
disk to get the latest copy. If the first host removed
a PV from the VG, the second host attempts to reread the
VG from old PV when rescanning. Reading the VG from the
removed PV fails, causing vg_read to return "VG not found".
The fix is to simply not fail when a VG is not found while
rereading a PV and continue without it.
(This doesn't happen if the second host happens to first
run a command like 'vgs' that triggers a global revalidation
of metadata.)
The code was expecting the wrong return value from
compare_config, which returns 0 when equal.
This is a problem for a lockd VG using multiple PVs
when the VG needs to be rescanned.
Previously, a command would only rescan a lockd VG
when lvmetad returned the "vg_invalid" flag indicating
that the cached copy was invalid (which is done by
lvmlockd.) This is still the only usual reason for
rescanning a lockd VG, but two new special cases are
added where we also do the rescan:
. When the --shared option is used to display lockd VGs
from hosts not using lvmlockd. This is the same case
as using --foreign to display foreign VGs, but --shared
was missing the corresponding bits to rescan the VGs.
. When a lockd VG is allowed to be read for displaying
after failing to acquire the lock from lvmlockd. In
this case, the usual mechanism for validating the
cache is missed, so assume the cache would have been
invalidated. (This had been a previous todo item
that was lost during other cleanup.)
These were long-standing todos that were lost track of.
This reverts commit 70db1d523d.
Since we use 'strncpy' even for case where it exactly matches
the buffer size and \0 is not expected to be added there.
This tries harder to avoid creating duplicate global locks in
sanlock VGs by refusing to create a new sanlock VG with a
global lock if other sanlock VGs exist that may have a gl.
vgsummary information contains provisional VG information
that is obtained without holding the VG lock. This info
can be used to lock the VG, and then read it with vg_read().
After the VG is read properly, the vgsummary info should
be verified.
Add the VG lock_type to the vgsummary. It needs to be
known before the VG can be locked and read.
pvscan autoactivation does not work for lockd VGs because
lock start is needed on a lockd VG before locking can be
done for it. Add a check to skip the attempt at autoactivate
rather than calling it, knowing it will fail.
Add a comment explaining why pvscan --cache works fine for
lockd VGs without locks, and why autoactivate is not done.
log_warn was added recently because no known code used
the given condition, but running pvcreate on an existing
PV uses this case, and should not produce a warning.
Put the change from commit #10d27998b3d2f6100e9e29e83d1d99948c55875f
back so we have working tree again for now. This code needs a bit of
a cleanup to return proper return value to check...
lib/format1/import-export.c:167: var_deref_op: Dereferencing null pointer "vg->lvm1_system_id"
lib/cache/lvmetad.c:1023: var_deref_op: Dereferencing null pointer "this"
daemons/lvmlockd/lvmlockd-core.c:2659: check_after_deref: Null-checking "act" suggests that it may be null, but it has already been dereferenced on all paths leading to the check
/daemons/lvmetad/lvmetad-core.c:1024: check_after_deref: Null-checking "pvmeta" suggests that it may be null, but it has already been dereferenced on all paths leading to the check
This is the client side handling of the global_invalid state
added to lvmetad in commit c595b50cec8a6b95c6ac4988912d1412f3cc0237.
The function added here:
. checks if the global state in lvmetad is invalid
. if so, scans disks to update the state in lvmetad
. clears the global_invalid flag in lvmetad
. updates the local udev db to reflect any changes
and update the lvmetad copy after it is reread from disk.
This is the client side handling of the vg_invalid state
added to lvmetad in commit c595b50cec8a6b95c6ac4988912d1412f3cc0237.
lvmetad_init() should not be called with open connection to the daemon.
Doing so is considered to be an internall error within lvm2 code.
Such coincidence can't occur within current code. Let's assure us it won't
ever happen.
Some of descritpions were misleading at least. Some were completely
off the reality.
lvmetad_init doesn't re-establish or initialise a connection
lvmetad_active and lvmetad_connect_or_warn can do so.
