IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Switch from warn to log_error since this generated
failing return code for command so printing log_error()
is mandatory.
Happens with i.e. pvscan --cache meets crashing lvmetad.
Repairing missing devices does not work reliably
with lvmetad, so disable lvmetad before repair.
A standard lvmetad refresh (pvscan --cache) will
enable lvmetad again.
Sending %d as format argument in lvmetad_vg_remove_pending() will cause
segfaults in config_make_nodes_v() when va_arg() casts to int64_t. Also, it is
clearly advertised in the lvm source code that using plain %d is prohibited, so
let's switch to FMTd64.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
When rescanning a VG from disk, the metadata read from
each PV was compared as a sanity check. The comparison
is done by exporting the vg metadata from each dev to
a config tree, and then comparing the config trees.
The function to create the config tree inserts
extraneous information along with the actual VG metadata.
This extra info includes creation_time. The config
trees for two devs can easily be created one second
apart in which case the different creation_times would
cause the metadata comparison to fail. The fix is to
exclude the extraneous info from the metadata comparison.
It's possible (mainly during boot) that udev has not finished
processing the device and hence the udev database record for that
device is still marked as uninitialized when we're trying to look
at it as part of multipath component check in pvscan --cache code.
So check several times with a short delay to wait for the udev db
record to be initialized before giving up completely.
When scanning devs to populate lvmetad during system startup,
filter-mpath with native sysfs multipath component detection
may not detect that a dev is multipath component. This is
because the multipath devices may not be set up yet.
Because of this, pvscan will scan multipath components during
startup, will see them as duplicate PVs, and will disable
lvmetad. This will leave lvmetad disabled on systems using
multipath, unless something or someone runs pvscan --cache
to rescan.
To avoid this problem, the code that is scanning devices to
populate lvmetad will now check the udev db to see if a
dev is a multipath component that should be skipped.
(This may not be perfect due to inherent udev races, but will
cover most cases and will be at least as good as it's ever
been.)
In some cases, the command will update VG metadata
in lvmetad without writing it. In these cases there
is no vg->vg_committed and it should use 'vg' directly.
This happens when the command finds that the lvmetad
VG has been invalidated, rereads the metadata from disk,
then updates lvmetad with that metadata. This happens
often with lvmlockd or foreign VGs, and can happen without
lvmlockd if a previous command fails after invalidating
the VG in lvmetad.
This fixes a regression from commit a7c45ddc5, which moved
the lvmetad VG update from vg_commit() to unlock_vg().
The lvmetad VG update needs to send the version of metadata
that was committed rather than sending the state of struct 'vg'.
The 'vg' may have been partially modified since vg_commit(),
and contain non-committed metadata that shouldn't be sent
to lvmetad.
Apply the same idea as vg_update.
Before doing the VG remove on disk, invalidate
the VG in lvmetad. After the VG is removed,
remove the VG in lvmetad. If the command fails
after removing the VG on disk, but before removing
the VG metadata from lvmetad, then a subsequent
command will see the INVALID flag and not use the
stale metadata from lvmetad.
Previously, a command sent lvmetad new VG metadata in vg_commit().
In vg_commit(), devices are suspended, so any memory allocation
done by the command while sending to lvmetad, or by lvmetad while
updating its cache could deadlock if memory reclaim was triggered.
Now lvmetad is updated in unlock_vg(), after devices are resumed.
The new method for updating VG metadata in lvmetad is in two phases:
1. In vg_write(), before devices are suspended, the command sends
lvmetad a short message ("set_vg_info") telling it what the new
VG seqno will be. lvmetad sees that the seqno is newer than
the seqno of its cached VG, so it sets the INVALID flag for the
cached VG. If sending the message to lvmetad fails, the command
fails before the metadata is committed and the change is not made.
If sending the message succeeds, vg_commit() is called.
2. In unlock_vg(), after devices are resumed, the command sends
lvmetad the standard vg_update message with the new metadata.
lvmetad sees that the seqno in the new metadata matches the
seqno it saved from set_vg_info, and knows it has the latest
copy, so it clears the INVALID flag for the cached VG.
If a command fails between 1 and 2 (after committing the VG on disk,
but before sending lvmetad the new metadata), the cached VG retains
the INVALID flag in lvmetad. A subsequent command will read the
cached VG from lvmetad, see the INVALID flag, ignore the cached
copy, read the VG from disk instead, update the lvmetad copy
with the latest copy from disk, (this clears the INVALID flag
in lvmetad), and use the correct VG metadata for the command.
(This INVALID mechanism already existed for use by lvmlockd.)
Previously, vgcfgrestore would attempt to vg_remove the
existing VG from lvmetad and then vg_update to add the
restored VG. But, if there was a failure in the command
or with vg_update, the lvmetad cache would be left incorrect.
Now, disable lvmetad before the restore begins, and then
rescan to populate lvmetad from disk after restore has
written the new VG to disk.
This fixes a problem in commit ae0a8740c. The problem
in that commit was that all existing PVs are initially
dropped from lvmetad. This works if the VG is updated
at the end, which replaces the dropped PVs, but if the
rescan finds that the VG seqno is unchanged, it leaves
the cached VG in place. So, we should only drop the
existing PVs in lvmetad when the VG is going to be updated.
Some commands scan labels to populate lvmcache multiple
times, i.e. lvmcache_init, scan labels to fill lvmcache,
lvmcache_destroy, then later repeat
Each time labels are scanned, duplicates are detected,
and preferred devices are chosen. Each time this is done
within a single command, we want to choose the same
preferred devices. So, check for existing preferences
when choosing preferred devices.
This also fixes a problem with the list of unused duplicate
devs when run in an lvm shell. The devs had been allocated
from cmd memory, resulting in invalid list entries between
commands.
A number of places are working on a specific dev when they
call lvmcache_info_from_pvid() to look up an info struct
based on a pvid. In those cases, pass the dev being used
to lvmcache_info_from_pvid(). When a dev is specified,
lvmcache_info_from_pvid() will verify that the cached
info it's using matches the dev being processed before
returning the info. Calling code will not mistakenly
get info for the wrong dev when duplicate devs exist.
This confusion was happening when scanning labels when
duplicate devs existed. label_read for the first dev
would add an info struct to lvmcache for that dev/pvid.
label_read for the second dev would see the pvid in
lvmcache from first dev, and mistakenly conclude that
the label_read from the second dev can be skipped
because it's already been done. By verifying that the
dev for the cached pvid matches the dev being read,
this mismatch is avoided and the label is actually read
from the second duplicate.
If a command gets stuck during an lvmetad update, lvmetad
will cancel that update after the timeout. The next command
to check the lvmetad will see that lvmetad needs to be
populated because lvmetad will return token of "none" after
a timed out update (same as when lvmetad is not populated
at all after starting.)
If a command gets an error during an lvmetad update, it
will now just quit and leave its updating token in place.
That update will be cancelled after the timeout.
This refactors the code for autoactivation. Previously,
as each PV was found, it would be sent to lvmetad, and
the VG would be autoactivated using a non-standard VG
processing function (the "activation_handler") called via
a function pointer from within the lvmetad notification path.
Now, any scanning that the command needs to do (scanning
only the named device args, or scanning all devices when
there are no args), is done first, before any activation
is attempted. During the scans, the VG names are saved.
After scanning is complete, process_each_vg is used to do
autoactivation of the saved VG names. This makes pvscan
activation much more similar to activation done with
vgchange or lvchange.
The separate autoactivate phase also means that if lvmetad
is disabled (either before or during the scan), the command
can continue with the activation step by simply not using
lvmetad and reverting to disk scanning to do the
activation.
If a command begins repopulating the lvmetad cache,
and fails part way through, it should set the disabled
state in lvmetad so other commands don't use bad data.
If a subsequent scan succeeds, the disabled state is
cleared.
If duplicate devices exist for a PV, and one device's
size matches the PV size, but the other doesn't, then
prefer the matching device.
If one device is used by an active LV, prefer that device.
When there are duplicate devices for a PV, one device
is preferred and chosen to exist in the VG. The other
devices are not used by lvm, but are displayed by pvs
with a new PV attr "d", indicating that they are
unchosen duplicate PVs.
The "duplicate" reporting field is set to "duplicate"
when the PV is an unchosen duplicate, and that field
is blank for the chosen PV.
Previously, duplicate PVs were processed as a side effect
of processing the "chosen" PV in lvmcache. The duplicate
PV would be hacked into lvmcache temporarily in place of
the chosen PV.
In the old way, we had to always process the "chosen" PV
device, even if a duplicate of it was named on the command
line. This meant we were processing a different device than
was asked for. This could be worked around by naming
multiple duplicate devs on the command line in which case
they were swapped in and out of lvmcache for processing.
Now, the duplicate devs are processed directly in their
own processing loop. This means we can remove the old
hacks related to processing dups as a side effect of
processing the chosen device. We can now simply process
the device that was named on the command line.
When the same PVID exists on two or more devices, one device
is preferred and used in the VG, and the others are duplicates
and are not used in the VG. The preferred device exists in
lvmcache as usual. The duplicates exist in a specical list
of unused duplicate devices.
The duplicate devs have the "d" attribute and the "duplicate"
reporting field displays "duplicate" for them.
'pvs' warns about duplicates, but the formal output only
includes the single preferred PV.
'pvs -a' has the same warnings, and the duplicate devs are
included in the output.
'pvs <path>' has the same warnings, and displays the named
device, whether it is preferred or a duplicate.
Wait to compare and choose alternate duplicate devices until
after all devices are scanned. During scanning, the first
duplicate dev is kept in lvmcache, and others are kept in a
new list (_found_duplicate_devs).
After all devices are scanned, compare all the duplicates
available for a given PVID and decide which is best.
If the dev used in lvmcache is changed, drop the old dev
from lvmcache entirely and rescan the replacement dev.
Previously the VG metadata from the old dev was kept in
lvmcache and only the dev was replaced.
A new config setting devices/allow_changes_with_duplicate_pvs
can be set to 0 which disallows modifying a VG or activating
LVs in it when the VG contains PVs with duplicate devices.
Set to 1 is the old behavior which allowed the VG to be
changed.
The logic for which of two devs is preferred has changed.
The primary goal is to choose a device that is currently
in use if the other isn't, e.g. by an active LV.
. prefer dev with fs mounted if the other doesn't, else
. prefer dev that is dm if the other isn't, else
. prefer dev in subsystem if the other isn't
If neither device is preferred by these rules, then don't
change devices in lvmcache, leaving the one that was found
first.
The previous logic for preferring a device was:
. prefer dev in subsystem if the other isn't, else
. prefer dev without holders if the other has holders, else
. prefer dev that is dm if the other isn't
When command is not using lvmetad because
use_lvmetad=0 in the config, but the lvmetad
pidfile exists, print a warning (previously
this checked for the socket existing instead
of the pidfile existing.)
The lvmetad connection is created within the
init_connections() path during command startup,
rather than via the old lvmetad_active() check.
The old lvmetad_active() checks are replaced
with lvmetad_used() which is a simple check that
tests if the command is using/connected to lvmetad.
The old lvmetad_set_active(cmd, 0) calls, which
stopped the command from using lvmetad (to revert to
disk scanning), are replaced with lvmetad_make_unused(cmd).
After a device rescan that repopulates lvmetad,
if no reason for disabling lvmetad was seen
(lvm1 metadata or duplicate PVs), then clear
the disabled flag in lvmetad. This allows
commands to resume using the lvmetad cache
after the cause for disabling it has been removed.
Commands already check if the lvmetad token is valid,
and if not, they rescan devices to repopulate lvmetad
before running. Now, in addition to checking the
lvmetad token, they also check if the lvmetad disabled
flag is set. If so, they do not use the lvmetad cache
and revert to disk scanning.
A global flag in lvmetad indicates it has been disabled.
Other flags indicate the reason it was disabled.
These flags can be queried using get_global_info.
The lvmetactl debugging utility can set and clear the
disabled flag in lvmetad. Nothing else sets the
disabled flag yet.
Commands will check these flags after connecting to
lvmetad. If the disabled flag is set, the command
will not use the lvmetad cache, but revert to disk
scanning.
To test this feature:
$ lvmetactl get_global_info
response = "OK"
global_invalid = 0
global_disable = 0
disable_reason = "none"
token = "filter:3041577944"
$ vgs
(should report VGs from lvmetad)
$ lvmetactl set_global_disable 1
$ lvmetactl get_global_info
response = "OK"
global_invalid = 0
global_disable = 1
disable_reason = "DIRECT"
token = "filter:3041577944"
$ vgs
WARNING: Not using lvmetad because the disable flag was set directly.
(should report VGs without contacting lvmetad)
$ lvmetactl set_global_disable 0
$ vgs
(should report VGs from lvmetad)
Move checking the lvmetad state, and the possible rescan,
out of lvmetad_send() to the start of the command.
Previously, the token mismatch and rescan would occur
within lvmetad_send() for some other request. Now,
the token mismatch is detected earlier, so the
rescan can be done before the main command is in
progress. Rescanning deep within the processing of
another command will disturb the lvmcache state of
that other command.
A rescan already exists at the start of the command
for the case where foreign VGs are going to be read.
This same rescan is now also performed when there is
an lvmetad token mismatch (from a changed global_filter).
The commands pvscan/vgscan/lvscan/vgimport are excluded
from this preemptive checking/rescanning for lvmetad
because they want to do rescanning themselves explicitly.
If rescanning devices fails, then lvmetad has not been
correctly repopulated and should not be used, so make
the command revert to not using lvmetad.
Since we already check in few other places 'info' is not NULL,
do the same for others - however when info would be NULL
it more or less looks like internal error.
This reverts e28e22b9e1
The problem that that commit was fixing (pytest failure)
no longer appears with the current code, so the commit is
not needed.
That commit is a problem for pvchange, because it prevents
lvmcache from retaining VG metadata even while the global
lock is held. pvchange holds the global lock to ensure
that VG metadata is kept in lvmcache throughout processing.
If the cache is not kept, a PV with zero MDAs will appear
first in its actual VG and then appear again in the orphan VG.
It wrongly appears a second time in the orphan VG only if
the actual VG is dropped from lvmcache.
Use process_each_vg() to lock and read the old VG,
and then call the main vgrename code.
When real VG names are used (not a UUID in place of the
old name), the command still pre-locks the new name
(when strcmp wants it locked first), before calling
process_each_vg on the old name.
In the case where the old name is replaced with a UUID,
process_each_vg now translates that UUID into the real
VG name, which it locks and reads. In this case, we
cannot do pre-locking to maintain lock ordering because
the old name is unknown. So, in this case the strcmp
based lock ordering is suppressed and the old name is
always locked first. This opens a remote chance for
lock ordering conflict between racing vgrenames between
two names where one or both commands use the UUID.
Before commit c1f246fedf,
_get_all_devices() did a full device scan before
get_vgnameids() was called. The full scan in
_get_all_devices() is from calling dev_iter_create(f, 1).
The '1' arg forces a full scan.
By doing a full scan in _get_all_devices(), new devices
were added to dev-cache before get_vgnameids() began
scanning labels. So, labels would be read from new devices.
(e.g. by the first 'pvs' command after the new device appeared.)
After that commit, _get_all_devices() was called
after get_vgnameids() was finished scanning labels.
So, new devices would be missed while scanning labels.
When _get_all_devices() saw the new devices (after
labels were scanned), those devices were added to
the .cache file. This meant that the second 'pvs'
command would see the devices because they would be
in .cache.
Now, the full device scan is factored out of
_get_all_devices() and called by itself at the
start of the command so that new devices will
be known before get_vgnameids() scans labels.
When two different VGs with the same name exist,
they are both stored in lvmcache using the vginfo->next
list. Previously, the code would print warnings (sometimes)
when adding VGs to this list. Now the duplicate VG names
are handled by higher level code, so this list no longer
needs to print warnings about duplicate VG names being found.
After recent changes to process_each, vg_read() is usually
given both the vgname and vgid for the intended VG.
However, in some cases vg_read() is given a vgid with
no vgname, or is given a vgname with no vgid.
When given a vgid with no vgname, vg_read() uses lvmcache
to look up the vgname using the vgid. If the vgname is
not found, vg_read() fails.
When given a vgname with no vgid, vg_read() should also
use lvmcache to look up the vgid using the vgname.
If the vgid is not found, vg_read() fails.
If the lvmcache lookup finds multiple vgids for the
vgname, then the lookup fails, causing vg_read() to fail
because the intended VG is uncertain.
Usually, both vgname and vgid for the intended VG are passed
to vg_read(), which means the lvmcache translations
between vgname and vgid are not done.
When not using lvmetad, this uses the system_id field in
the cached vginfo structs that are populated during a scan.
When using lvmetad, this requests the VG from lvmetad, and
checks the system_id field in the returned metadata.
When the command already knows both the vgid and vgname,
it should send both to lvmetad for a more exact request,
and it can save lvmetad the work of a name lookup.
Use 'mda' instead of NULL to quite Coverity warn.
However this code seems to be actually not even possible to hit.
With proper analysis it may possibly be dropped from code to
simplify logic.
When the command gets a list of alternate devices
from lvmetad, log each one directly. This is not
the same as the warnings when adding lvmcache,
which are related to which duplicate is preferred.
When lvmetad is used and lvmcache update function (lvmcache_update_vgname_and_id)
was called to update existing lvmcache records, a condition was met
which made to retun from the update function immediately, effectively
making it NOOP.
It seems there's no reason for such condition and lvmcache should be
update appropriately even when lvmetad used as lvmcache may be reused,
most notably in lvm shell.
It's possible this is a remnant of the lvmetad development code which
didn't get removed for some reason and the bug didn't get spotted
because lvm shell is not used often (the condition dates back to 2012
or so).
Example, lvmetad and lvm shell used:
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/sda vg lvm2 a-- 124.00m 124.00m
Before this patch:
==================
lvm> vgremove vg
Volume group "vg" successfully removed
lvm> pvs
With this patch applied:
========================
lvm> vgremove vg
Volume group "vg" successfully removed
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/sda lvm2 --- 128.00m 128.00m
The old code made two loops through the PVs: in the first
loop it found the max PV and VG name lengths, and in the
second loop it printed each PV using the name lengths as
field widths for aligning columns.
The new code uses process_each_pv() which makes one loop
through the PVs. In the *first* call to pvscan_single(),
the max name lengths are found by looping through the
lvmcache entries which have been populated by the generic
process_each code prior to calling any _single functions.
Subsequent calls to pvscan_single() reuse the max lengths
that were found by the first call.
If lvmlockd is running, lvmetad is configured (use_lvmetad=1),
but lvmetad is not running, then commands will seg fault
when trying to send a message to lvmetad.
The difference is lvmetad being "active", not just "used".
When lvmetad_pvscan_vg() reads VG metadata from each PV,
it compares it to the last one to verify it matches.
If the VG metadata does not match on the PVs, an error
is printed and it fails to read the VG. In this error
case, use log_debug to show the differences between
the two unmatching copies of the metadata.
One host changes a VG, making the cached VG on another
host invalid. The other host then rereads the VG from
disk to get the latest copy. If the first host removed
a PV from the VG, the second host attempts to reread the
VG from old PV when rescanning. Reading the VG from the
removed PV fails, causing vg_read to return "VG not found".
The fix is to simply not fail when a VG is not found while
rereading a PV and continue without it.
(This doesn't happen if the second host happens to first
run a command like 'vgs' that triggers a global revalidation
of metadata.)
The code was expecting the wrong return value from
compare_config, which returns 0 when equal.
This is a problem for a lockd VG using multiple PVs
when the VG needs to be rescanned.
Previously, a command would only rescan a lockd VG
when lvmetad returned the "vg_invalid" flag indicating
that the cached copy was invalid (which is done by
lvmlockd.) This is still the only usual reason for
rescanning a lockd VG, but two new special cases are
added where we also do the rescan:
. When the --shared option is used to display lockd VGs
from hosts not using lvmlockd. This is the same case
as using --foreign to display foreign VGs, but --shared
was missing the corresponding bits to rescan the VGs.
. When a lockd VG is allowed to be read for displaying
after failing to acquire the lock from lvmlockd. In
this case, the usual mechanism for validating the
cache is missed, so assume the cache would have been
invalidated. (This had been a previous todo item
that was lost during other cleanup.)
These were long-standing todos that were lost track of.
This reverts commit 70db1d523d.
Since we use 'strncpy' even for case where it exactly matches
the buffer size and \0 is not expected to be added there.
This tries harder to avoid creating duplicate global locks in
sanlock VGs by refusing to create a new sanlock VG with a
global lock if other sanlock VGs exist that may have a gl.
vgsummary information contains provisional VG information
that is obtained without holding the VG lock. This info
can be used to lock the VG, and then read it with vg_read().
After the VG is read properly, the vgsummary info should
be verified.
Add the VG lock_type to the vgsummary. It needs to be
known before the VG can be locked and read.
pvscan autoactivation does not work for lockd VGs because
lock start is needed on a lockd VG before locking can be
done for it. Add a check to skip the attempt at autoactivate
rather than calling it, knowing it will fail.
Add a comment explaining why pvscan --cache works fine for
lockd VGs without locks, and why autoactivate is not done.
log_warn was added recently because no known code used
the given condition, but running pvcreate on an existing
PV uses this case, and should not produce a warning.
Put the change from commit #10d27998b3d2f6100e9e29e83d1d99948c55875f
back so we have working tree again for now. This code needs a bit of
a cleanup to return proper return value to check...
lib/format1/import-export.c:167: var_deref_op: Dereferencing null pointer "vg->lvm1_system_id"
lib/cache/lvmetad.c:1023: var_deref_op: Dereferencing null pointer "this"
daemons/lvmlockd/lvmlockd-core.c:2659: check_after_deref: Null-checking "act" suggests that it may be null, but it has already been dereferenced on all paths leading to the check
/daemons/lvmetad/lvmetad-core.c:1024: check_after_deref: Null-checking "pvmeta" suggests that it may be null, but it has already been dereferenced on all paths leading to the check
This is the client side handling of the global_invalid state
added to lvmetad in commit c595b50cec8a6b95c6ac4988912d1412f3cc0237.
The function added here:
. checks if the global state in lvmetad is invalid
. if so, scans disks to update the state in lvmetad
. clears the global_invalid flag in lvmetad
. updates the local udev db to reflect any changes
and update the lvmetad copy after it is reread from disk.
This is the client side handling of the vg_invalid state
added to lvmetad in commit c595b50cec8a6b95c6ac4988912d1412f3cc0237.
lvmetad_init() should not be called with open connection to the daemon.
Doing so is considered to be an internall error within lvm2 code.
Such coincidence can't occur within current code. Let's assure us it won't
ever happen.
Some of descritpions were misleading at least. Some were completely
off the reality.
lvmetad_init doesn't re-establish or initialise a connection
lvmetad_active and lvmetad_connect_or_warn can do so.
This is an alternative/equivalent to commit
ca67cf84df
The problem (wrong label->dev after a new preferred
duplicate device is chosen) was isolated to the lvmetad
case (non-lvmetad worked fine), and this fixes the problem
by setting the new label->dev in the lvmetad-specific
code rather than in the general lvmcache code.
In process_each_{vg,lv,pv} when no vgname args are given,
the first step is to get a list of all vgid/vgname on the
system. This is exactly what lvmetad returns from a
vg_list request. The current code is doing a vg_lookup
on each VG after the vg_list and populating lvmcache with
the info for each VG. These preliminary vg_lookup's are
unnecessary, because they will be done again when the
processing functions call vg_read. This patch eliminates
the initial round of vg_lookup's, which can roughly cut in
half the number of lvmetad requests and save a lot of extra work.
Example:
/dev/loop0 and /dev/loop1 are duplicates,
created by copying one backing file to the
other.
'identity /dev/loopX' creates an identity
mapping for loopX named idmloopX, which
adds a duplicate for the named device.
The duplicate selection code for lvmetad is
incomplete, and lvmetad is disabled for this
example.
[~]# losetup -f loopfile0
[~]# pvs
PV VG Fmt Attr PSize PFree
/dev/loop0 foo lvm2 a-- 308.00m 296.00m
[~]# losetup -f loopfile1
[~]# pvs
Found duplicate PV LnSOEqzEYED3RvIOa5PZP2s7uyuBLmAV: using /dev/loop1 not /dev/loop0
Using duplicate PV /dev/loop1 which is more recent, replacing /dev/loop0
PV VG Fmt Attr PSize PFree
/dev/loop1 foo lvm2 a-- 308.00m 308.00m
[~]# ./identity /dev/loop0
[~]# pvs
Found duplicate PV LnSOEqzEYED3RvIOa5PZP2s7uyuBLmAV: using /dev/loop1 not /dev/loop0
Using duplicate PV /dev/loop1 without holders, replacing /dev/loop0
Found duplicate PV LnSOEqzEYED3RvIOa5PZP2s7uyuBLmAV: using /dev/mapper/idmloop0 not /dev/loop1
Using duplicate PV /dev/mapper/idmloop0 from subsystem DM, replacing /dev/loop1
PV VG Fmt Attr PSize PFree
/dev/mapper/idmloop0 foo lvm2 a-- 308.00m 296.00m
[~]# ./identity /dev/loop1
[~]# pvs
WARNING: duplicate PV LnSOEqzEYED3RvIOa5PZP2s7uyuBLmAV is being used from both devices /dev/loop0 and /dev/loop1
Found duplicate PV LnSOEqzEYED3RvIOa5PZP2s7uyuBLmAV: using /dev/loop1 not /dev/loop0
Using duplicate PV /dev/loop1 which is more recent, replacing /dev/loop0
Found duplicate PV LnSOEqzEYED3RvIOa5PZP2s7uyuBLmAV: using /dev/mapper/idmloop0 not /dev/loop1
Using duplicate PV /dev/mapper/idmloop0 from subsystem DM, replacing /dev/loop1
Found duplicate PV LnSOEqzEYED3RvIOa5PZP2s7uyuBLmAV: using /dev/mapper/idmloop1 not /dev/mapper/idmloop0
Using duplicate PV /dev/mapper/idmloop1 which is more recent, replacing /dev/mapper/idmloop0
PV VG Fmt Attr PSize PFree
/dev/mapper/idmloop1 foo lvm2 a-- 308.00m 308.00m
pv_write is called both to write orphans and to rewrite PV headers
of PVs in VGs. It needs to select the correct VG id so that the
internal cache state gets updated correctly.
It only affected commands that involved further steps after
the pv_write and was often masked because the metadata would
be re-read off disk and correct itself.
"Incorrect metadata area header checksum" warnings appeared.
Example:
Create vg1 containing dev1, dev2 and dev3.
Hide dev1 and dev2 from the system.
Fix up vg1 with vgreduce --removemissing.
Bring back dev1 and dev2.
In a single operation reinstate dev1 and dev2 into vg1 (vgextend).
Done as separate operations (automatically fix-up dev1 and dev2 as orphans,
then vgextend) it worked, but done all in one go the internal cache got
corrupted and warnings about checksum errors appeared.
Commit 80f4b4b803
introduced undesirable side-effects for lvm2app user
which happens to be our own python binding.
It appear obtaing pvs list keeps global lock.
So restricting this to VG_GLOBAL READ locks and skip
the drop skip if WRITE lock is held.
Refactor the recent metadata-reading optimisation patches.
Remove the recently-added cache fields from struct labeller
and struct format_instance.
Instead, introduce struct lvmcache_vgsummary to wrap the VG information
that lvmcache holds and add the metadata size and checksum to it.
Allow this VG summary information to be looked up by metadata size +
checksum. Adjust the debug log messages to make it clear when this
shortcut has been successful.
(This changes the optimisation slightly, and might be extendable
further.)
Add struct cached_vg_fmtdata to format-specific vg_read calls to
preserve state alongside the VG across separate calls and indicate
if the details supplied match, avoiding the need to read and
process the VG metadata again.
Fixes segfault when 'pvs' encounters two different PVs sharing the same
uuid but one an orphan, the other in a VG.
If VG_GLOBAL is held, there seems no point in doing a full scan more
than once.
If undesirable side-effects show up, we can try restricting this to
VG_GLOBAL READ locks. The original code dates back to 2.02.40.
Metadata areas which are marked as ignored should not be scanned
and read during pvscan --cache. Otherwise, this can cause lvmetad
to cache out-of-date metadata in case other PVs with fresh metadata
are missing by chance.
Make this to work like in non-lvmetad case where the behaviour would
be the same as if the PV was orphan (in case we have no other PVs
with valid non-ignored metadata areas).
When lvm1 PVs are visible, and lvmetad is used, and the foreign
option was included in the reporting command, the reporting
command would fail after the 'pvscan all devs' function saw
the lvm1 PVs. There is no reason the command should fail
because of the lvm1 PVs; they should just be ignored.
A full search for duplicate PVs in the case of pvs -a
is only necessary when duplicates have previously been
detected in lvmcache. Use a global variable from lvmcache
to indicate that duplicate PVs exist, so we can skip the
search for duplicates when none exist.
When multiple duplicate devices are specified on the
command line, the PV is processed once for each of them,
but pv->dev is the device used each time.
This overrides the PV device to reflect the duplicate
device that was specified on the command line. This is
done by hacking the lvmcache to replace pv->dev with the
device of the duplicate being processed. (It would be
preferable to override pv->dev without munging the content
of the cache, and without sprinkling special cases throughout
the code.)
This override only applies when multiple duplicate devices are
specified on the command line. When only a single duplicate
device of pv->dev is specified, the priority is to display the
cached pv->dev, so pv->dev is not overridden by the named
duplicate device.
In the examples below, loop3 is the cached device referenced
by pv->dev, and is given priority for processing. Only after
loop3 is processed/displayed, will other duplicate devices
loop0/loop1 appear (when requested on the command line.)
With two duplicate devices, loop0 and loop3:
# pvs
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop3 not /dev/loop0
PV VG Fmt Attr PSize PFree
/dev/loop3 loopa lvm2 a-- 12.00m 12.00m
# pvs /dev/loop3
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop3 not /dev/loop0
PV VG Fmt Attr PSize PFree
/dev/loop3 loopa lvm2 a-- 12.00m 12.00m
# pvs /dev/loop0
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop3 not /dev/loop0
PV VG Fmt Attr PSize PFree
/dev/loop3 loopa lvm2 a-- 12.00m 12.00m
# pvs -o+dev_size /dev/loop0 /dev/loop3
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop3 not /dev/loop0
PV VG Fmt Attr PSize PFree DevSize
/dev/loop0 loopa lvm2 a-- 12.00m 12.00m 16.00m
/dev/loop3 loopa lvm2 a-- 12.00m 12.00m 32.00m
With three duplicate devices, loop0, loop1, loop3:
# pvs -o+dev_size
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop1 not /dev/loop0
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop3 not /dev/loop1
PV VG Fmt Attr PSize PFree DevSize
/dev/loop3 loopa lvm2 a-- 12.00m 12.00m 32.00m
# pvs -o+dev_size /dev/loop3
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop1 not /dev/loop0
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop3 not /dev/loop1
PV VG Fmt Attr PSize PFree DevSize
/dev/loop3 loopa lvm2 a-- 12.00m 12.00m 32.00m
# pvs -o+dev_size /dev/loop0
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop1 not /dev/loop0
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop3 not /dev/loop1
PV VG Fmt Attr PSize PFree DevSize
/dev/loop3 loopa lvm2 a-- 12.00m 12.00m 32.00m
# pvs -o+dev_size /dev/loop1
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop1 not /dev/loop0
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop3 not /dev/loop1
PV VG Fmt Attr PSize PFree DevSize
/dev/loop3 loopa lvm2 a-- 12.00m 12.00m 32.00m
# pvs -o+dev_size /dev/loop3 /dev/loop0
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop1 not /dev/loop0
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop3 not /dev/loop1
PV VG Fmt Attr PSize PFree DevSize
/dev/loop0 loopa lvm2 a-- 12.00m 12.00m 16.00m
/dev/loop3 loopa lvm2 a-- 12.00m 12.00m 32.00m
# pvs -o+dev_size /dev/loop3 /dev/loop1
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop1 not /dev/loop0
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop3 not /dev/loop1
PV VG Fmt Attr PSize PFree DevSize
/dev/loop1 loopa lvm2 a-- 12.00m 12.00m 32.00m
/dev/loop3 loopa lvm2 a-- 12.00m 12.00m 32.00m
# pvs -o+dev_size /dev/loop0 /dev/loop1
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop1 not /dev/loop0
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop3 not /dev/loop1
PV VG Fmt Attr PSize PFree DevSize
/dev/loop1 loopa lvm2 a-- 12.00m 12.00m 32.00m
/dev/loop3 loopa lvm2 a-- 12.00m 12.00m 32.00m
# pvs -o+dev_size /dev/loop0 /dev/loop1 /dev/loop3
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop1 not /dev/loop0
Found duplicate PV XhLbpVo0hmuwrMQLjfxuAvPFUFZqD4vr: using /dev/loop3 not /dev/loop1
PV VG Fmt Attr PSize PFree DevSize
/dev/loop0 loopa lvm2 a-- 12.00m 12.00m 16.00m
/dev/loop1 loopa lvm2 a-- 12.00m 12.00m 32.00m
/dev/loop3 loopa lvm2 a-- 12.00m 12.00m 32.00m
Processes a PV once for each time a device with its PV ID
exists on the command line.
This fixes a regression in the case where:
. devices /dev/sdA and /dev/sdB where clones (same PV ID)
. the cached VG references /dev/sdA
. before the regression, the command: pvs /dev/sdB
would display the cached device clone /dev/sdA
. after the regression, pvs /dev/sdB would display nothing,
causing vgimportclone /dev/sdB to fail.
. with this fix, pvs /dev/sdB displays /dev/sdA
Also, pvs /dev/sdA /dev/sdB will report two lines, one for each
device on the command line, but /dev/sdA is displayed for each.
This only works without lvmetad.
There are actually three filter chains if lvmetad is used:
- cmd->lvmetad_filter used when when scanning devices for lvmetad
- cmd->filter used when processing lvmetad responses
- cmd->full_fiilter (which is just cmd->lvmetad_filter + cmd->filter chained together) used
for remaining situations
This patch adds the third one - "cmd->full_filter" - currently this is
used if device processing does not fall into any of the groups before,
for example, devices which does not have the PV label yet and we're just
creating a new one or we're processing the devices where the list of the
devices (PVs) is not returned by lvmetad initially.
Currently, the cmd->full_filter is used exactly in these functions:
- lvmcache_label_scan
- _pvcreate_check
- pvcreate_vol
- lvmdiskscan
- pvscan
- _process_each_label
If lvmetad is used, then simply cmd->full_filter == cmd->filter because
cmd->lvmetad_filter is NULL in this case.
We need to use proper filter chain when we disable lvmetad use
explicitly in the code by calling lvmetad_set_active(0) while
overriding existing configuration. We need to reinitialize filters
in this case so proper filter chain is used. The same applies
for the other way round - when we enable lvmetad use explicitly in
the code (though this is not yet used).
With this change, the filter chains used look like this now:
A) When *lvmetad is not used*:
- persistent filter -> regex filter -> sysfs filter ->
global regex filter -> type filter ->
usable device filter(FILTER_MODE_NO_LVMETAD) ->
mpath component filter -> partitioned filter ->
md component filter
B) When *lvmetad is used* (two separate filter chains):
- the lvmetad filter chain used when scanning devs for lvmetad update:
sysfs filter -> global regex filter -> type filter ->
usable device filter(FILTER_MODE_PRE_LVMETAD) ->
mpath component filter -> partitioned filter ->
md component filter
- the filter chain used for lvmetad responses:
persistent filter -> usable device filter(FILTER_MODE_POST_LVMETAD) ->
regex filter
We used to print an error message whenever we tried to deal with devices that
lvmetad knew about but were rejected by a client-side filter. Instead, we now
check whether the device is actually absent or only filtered out and only print
a warning in the latter case.
The list of strings is used quite frequently and we'd like to reuse
this simple structure for report selection support too. Make it part
of libdevmapper for general reuse throughout the code.
This also simplifies the LVM code a bit since we don't need to
include and manage lvm-types.h anymore (the string list was the
only structure defined there).
Recent debug tracing commit introduce read of uninitialized memory,
since VGID is not really a proper string which ends with '\0'.
Enforce at most 32 (ID_LEN) chars are read from vgid.
(in release fix)
Since commit f12ee43f2e call destroy,
it start to check all VGs are unlocked. However when we become_daemon,
we simply reset locking (since lock is still kept by parent process).
So implement a simple 'reset' flag.
Decorate NULL returns with debug_cache output so the
debug log doesn't contain spurios <bactrace> line without
any reason for it.
Add internal errors when cache is misused.
This prevents numerous VG refreshes on each "pvscan --cache -aay" call
if the VG is found complete. We need to issue the refresh only if the PV:
- is new
- was gone before and now it reappears (device "unplug/plug back" scenario)
- the metadata has changed
Test LVM_LVMETAD_PIDFILE for pid for lvm command.
Fix WHATS_NEW envvar name usage
Fix init order in prepare_lvmetad to respect set vars
and avoid clash with system settings.
Update test to really test the 'is running' message.
Several fields used to display 0 if undefined. Recent changes
to the way the fields are reported threw away some tests for
valid pointers, leading to segfaults with 'pvs -o all'.
Reinstate the original behaviour.
If a PV in an existing VG becomes orphaned (with 'pvcreate -ff', for
example) the VG struct cached against its vginfo must be invalidated.
This is because the struct device it references no longer contains
the PV label so becomes incorrect.
This triggers the error:
Internal error: PV $dev unexpectedly not in cache.
when the PV from the cached VG metadata is subsequently looked up
in the cache.
Bug introduced in 2.02.87 by commit 7ad0d47c3c
("Cache and share generated VG structs").
Before:
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/loop3 vg12 lvm2 a-- 28.00m 28.00m
/dev/loop4 vg12 lvm2 a-- 28.00m 28.00m
lvm> pvcreate -ff /dev/loop3
Really INITIALIZE physical volume "/dev/loop3" of volume group "vg12" [y/n]? y
WARNING: Forcing physical volume creation on /dev/loop3 of volume group "vg12"
Physical volume "/dev/loop3" successfully created
lvm> pvs
Internal error: PV /dev/loop3 unexpectedly not in cache.
PV VG Fmt Attr PSize PFree
/dev/loop3 vg12 lvm2 a-- 28.00m 28.00m
/dev/loop3 lvm2 a-- 32.00m 32.00m
/dev/loop4 vg12 lvm2 a-- 28.00m 28.00m
After:
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/loop3 vg12 lvm2 a-- 28.00m 28.00m
/dev/loop4 vg12 lvm2 a-- 28.00m 28.00m
lvm> pvcreate -ff /dev/loop3
Really INITIALIZE physical volume "/dev/loop3" of volume group "vg12" [y/n]? y
WARNING: Forcing physical volume creation on /dev/loop3 of volume group "vg12"
Physical volume "/dev/loop3" successfully created
lvm> pvs
PV VG Fmt Attr PSize PFree
/dev/loop3 lvm2 a-- 32.00m 32.00m
/dev/loop4 vg12 lvm2 a-- 28.00m 28.00m
unknown device vg12 lvm2 a-m 28.00m 28.00m
Introduce FMT_OBSOLETE to identify pool metadata and use it and FMT_MDAS
instead of hard-coded format names.
Explain device accesses on pvscan --cache man page.
If using lv/vgchange --sysinit -aay and lvmetad is enabled, we'd like to
avoid the direct activation and rely on autoactivation instead so
it fits system initialization scripts.
But if we're calling lv/vgchange --sysinit -aay too early when even
lvmetad service is not started yet, we just need to do the direct
activation instead without printing any error messages (while
trying to connect to lvmetad and not finding its socket).
This patch adds two helper functions - "lvmetad_socket_present" and
"lvmetad_used" which can be used to check for this condition properly
and avoid these lvmetad connections when the socket is not present
(and hence lvmetad is not yet running).
All labellers always use the "private" (void *) field as the fmt pointer. Making
this fact explicit in the type of the labeller simplifies the label reporting
code which needs to extract the format. Moreover, it removes a number of
error-prone casts from the code.
Fix and improve handling on sigint.
Always check for signal presence *before* calling of command,
so it will not call the command when break was hit.
If the command has been finished succesfully there is
no problem to mark the command ok and not report interrupt at all.
Fix cuple related stack; reports and assignments.
Changes:
- move device type registration out of "type filter" (filter.c)
to a separate and new dev-type.[ch] for common use throughout the code
- the structure for keeping the major numbers detected for available
device types and available partitioning available is stored in
"dev_types" structure now
- move common partitioning detection code to dev-type.[ch] as well
together with other device-related functions bound to dev_types
(see dev-type.h for the interface)
The dev-type interface contains all common functions used to detect
subsystems/device types, signature/superblock recognition code,
type-specific device properties and other common device properties
(bound to dev_types), including partitioning support.
- add dev_types instance to cmd context as cmd->dev_types for common use
- use cmd->dev_types throughout as a central point for providing
information about device types
Last commit made dump filter only partially composable.
Add remaining functionality and also support composable wipe,
which is needed, when i.e. vgscan needs to remove cache.
(in release fix)
New tools with PV header extension support will read the extension
if it exists and it's not an error if it does not exist (so old PVs
will still work seamlessly with new tools).
Old tools without PV header extension support will just ignore any
extension.
As for the Embedding Area location information (its start and size),
there are actually two places where this is stored:
- PV header extension
- VG metadata
The VG metadata contains a copy of what's written in the PV header
extension about the Embedding Area location (NULL value is not copied):
physical_volumes {
pv0 {
id = "AkSSRf-difg-fCCZ-NjAN-qP49-1zzg-S0Fd4T"
device = "/dev/sda" # Hint only
status = ["ALLOCATABLE"]
flags = []
dev_size = 262144 # 128 Megabytes
pe_start = 67584
pe_count = 23 # 92 Megabytes
ea_start = 2048
ea_size = 65536 # 32 Megabytes
}
}
The new metadata fields are "ea_start" and "ea_size".
This is mostly useful when restoring the PV by using existing
metadata backups (e.g. pvcreate --restorefile ...).
New tools does not require these two fields to exist in VG metadata,
they're not compulsory. Therefore, reading old VG metadata which doesn't
contain any Embedding Area information will not end up with any kind
of error but only a debug message that the ea_start and ea_size values
were not found.
Old tools just ignore these extra fields in VG metadata.
PV header extension comes just beyond the existing PV header base:
PV header base (existing):
- uuid
- device size
- null-terminated list of Data Areas
- null-terminater list of MetaData Areas
PV header extension:
- extension version
- flags
- null-terminated list of Embedding Areas
This patch also adds "eas" (Embedding Areas) list to lvmcache (lvmcache_info)
and it also adds support for common operations on the list (just like for
already existing "das" - Data Areas list):
- lvmcache_add_ea
- lvmcache_update_eas
- lvmcache_foreach_ea
- lvmcache_del_eas
Also, add ea_start and ea_size to struct physical_volume for processing
PV Embedding Area location throughout the code (currently only one
Embedding Area is supported, though the definition on disk allows for
more if needed in the future...).
Also, define FMT_EAS format flag to mark that the format actually
supports Embedding Areas (currently format-text only).
fmt1 doesn't have a separate commit function: updates take effect
immediately vg_write is called, so we must update lvmetad at this
point if we're going to go on and ask lvmetad for the VG metadata
again before calling the commit function (though that's probably an
unsupported and pointless thing to do anyway as the client must
already have that data and it cannot have changed because it's locked
and with devs suspended we shouldn't be communicating with lvmetad;
so when that's fixed properly, this fix here can be reverted).
This problem showed up as an internal error when lvremoving an LVM1
snapshot.
> Internal error: LV snap1 (00000000000000000000000000000001) missing from preload metadata
https://bugzilla.redhat.com/891855
Rename lvmetad_warning() to lvmetad_connect_or_warn().
Log all connection attempts on the client side, whether successful or not.
Reduce some nesting and remove a redundant assertion.
Calling pvscan --cache with -aay on a PV without an MDA would spuriously fail
with an internal error, because of an incorrect assumption that a parsed VG
structure was always available. This is not true and the autoactivation handler
needs to call vg_read to obtain metadata in cases where the PV had no MDAs to
parse. Therefore, we pass vgid into the handler instead of the (possibly NULL)
VG coming from the PV's MDA.
