IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Introduce structures lv_status_thin_pool and
lv_status_thin (pair to lv_status_cache, lv_status_vdo)
Convert lv_thin_percent() -> lv_thin_status()
and lv_thin_pool_percent() + lv_thin_pool_transaction_id() ->
lv_thin_pool_status().
This way a function user can see not only percentages, but also
other important status info about thin-pool.
TODO:
This patch tries to not change too many other things,
but pool_below_threshold() now uses new thin-pool info to return
failure if thin-pool cannot be actually modified.
This should be handle separately in a better way.
When thetable reload fails during suspend() - we were only calling
plain resume() - and this will reload only those devices,
which were left suspend, but will not try to restore
metadata state according to lvm2 reverted metadata.
So if we were reloading device tree - we have restored
only top-level LV and rest of reverted device manipulation
were left alone and possibly mismatched what is in committed
metadata.
FIXME: There are several cases were such revert will likely not work
properly anyway as some operation are currenly handled in single commit,
while they need multiple commits, but it's step towards better correctness.
At least we catch there errors now earlier.
This is probably somewhat experimantal patch - but when i.e. raid device
is just extend, there should not be a technical need for flush,
unless the target would stricly need it. It should allow faster
processing of lvm command not being blocked by possibly longer flush.
dm-integrity stores checksums of the data written to an
LV, and returns an error if data read from the LV does
not match the previously saved checksum. When used on
raid images, dm-raid will correct the error by reading
the block from another image, and the device user sees
no error. The integrity metadata (checksums) are stored
on an internal LV allocated by lvm for each linear image.
The internal LV is allocated on the same PV as the image.
Create a raid LV with an integrity layer over each
raid image (for raid levels 1,4,5,6,10):
lvcreate --type raidN --raidintegrity y [options]
Add an integrity layer to images of an existing raid LV:
lvconvert --raidintegrity y LV
Remove the integrity layer from images of a raid LV:
lvconvert --raidintegrity n LV
Settings
Use --raidintegritymode journal|bitmap (journal is default)
to configure the method used by dm-integrity to ensure
crash consistency.
Initialization
When integrity is added to an LV, the kernel needs to
initialize the integrity metadata/checksums for all blocks
in the LV. The data corruption checking performed by
dm-integrity will only operate on areas of the LV that
are already initialized. The progress of integrity
initialization is reported by the "syncpercent" LV
reporting field (and under the Cpy%Sync lvs column.)
Example: create a raid1 LV with integrity:
$ lvcreate --type raid1 -m1 --raidintegrity y -n rr -L1G foo
Creating integrity metadata LV rr_rimage_0_imeta with size 12.00 MiB.
Logical volume "rr_rimage_0_imeta" created.
Creating integrity metadata LV rr_rimage_1_imeta with size 12.00 MiB.
Logical volume "rr_rimage_1_imeta" created.
Logical volume "rr" created.
$ lvs -a foo
LV VG Attr LSize Origin Cpy%Sync
rr foo rwi-a-r--- 1.00g 4.93
[rr_rimage_0] foo gwi-aor--- 1.00g [rr_rimage_0_iorig] 41.02
[rr_rimage_0_imeta] foo ewi-ao---- 12.00m
[rr_rimage_0_iorig] foo -wi-ao---- 1.00g
[rr_rimage_1] foo gwi-aor--- 1.00g [rr_rimage_1_iorig] 39.45
[rr_rimage_1_imeta] foo ewi-ao---- 12.00m
[rr_rimage_1_iorig] foo -wi-ao---- 1.00g
[rr_rmeta_0] foo ewi-aor--- 4.00m
[rr_rmeta_1] foo ewi-aor--- 4.00m
Enhance lv_info with lv_info_with_name_check.
This 'variant' not only check existance if UUID in DM table
but also compares its DM name whether it's matching expected LV name.
Otherwise activation may 'skip' activation with rename in case the
DM UUID already exists, just device is different name.
This change make fairly easier manipulation with i.e. detached mirror
leg which ATM is using same UUID - just the LV name have been changed.
Used code was not able to run 'activation' (and do a rename) and just
skipped the call. So the code used to do a workaround and 'tried'
to deactivate such LV firts - this however work only in non-clvmd case,
as cluster was not having the lock for deactivated LV.
With this extended lv_info code will run 'activation' and will
synchronize the name to match expected LV name.
Patch extends _lv_info() with new paramter 'with_name_check',
which is later translated into 'name_check' argument for
_info_run() which in case of name mismatch evaluates the
check as if device does not exists.
Such call is only used in one place _lv_activate() which then
let activation run. All other invocation of _info() calls
are left intact.
TODO: fix mirror table manipulation (and raid)....
If the linear mapping is lost (for whatever reason, i.e.
test suite forcible 'dmsetup remove' linear LV,
lvm2 had hard times figuring out how to deactivate such DM table.
So add function which is in case inactive VDO pool LV checks if
the pool is actually still active (-vpool device present) and
it has open count == 0. In this case deactivation is allowed
to continue and cleanup DM table.
Enhance 'activation' experience for VDO pool to more closely match
what happens for thin-pools where we do use a 'fake' LV to keep pool
running even when no thinLVs are active. This gives user a choice
whether he want to keep thin-pool running (wihout possibly lenghty
activation/deactivation process)
As we do plan to support multple VDO LVs to be mapped into a single VDO,
we want to give user same experience and 'use-patter' as with thin-pools.
This patch gives option to activate VDO pool only without activating
VDO LV.
Also due to 'fake' layering LV we can protect usage of VDO pool from
command like 'mkfs' which do require exlusive access to the volume,
which is no longer possible.
Note: VDO pool contains 1024 initial sectors as 'empty' header - such
header is also exposed in layered LV (as read-only LV).
For blkid we are indentified as LV with UUID suffix - thus private DM
device of lvm2 - so we do not need to store any extra info in this
header space (aka zero is good enough).
Move DM usage into dev_manager.c source file.
Also convert STATUS to INFO ioctl - as that's enough
to obtain UUID - this also avoid issuing unwanted flush on checked DM
device for being mpath.
Since the parse_vdo_pool_status() become vdo_manip API part,
and there will be no 'dm' matching status parser,
the API can be simplified and closely match thin API here.
There's a small window during creation of a new RaidLV when
rmeta SubLVs are made visible to wipe them in order to prevent
erroneous discovery of stale RAID metadata. In case a crash
prevents the SubLVs from being committed hidden after such
wiping, the RaidLV can still be activated with the SubLVs visible.
During deactivation though, a deadlock occurs because the visible
SubLVs are deactivated before the RaidLV.
The patch adds _check_raid_sublvs to the raid validation in merge.c,
an activation check to activate.c (paranoid, because the merge.c check
will prevent activation in case of visible SubLVs) and shares the
existing wiping function _clear_lvs in raid_manip.c moved to lv_manip.c
and renamed to activate_and_wipe_lvlist to remove code duplication.
Whilst on it, introduce activate_and_wipe_lv to share with
(lvconvert|lvchange).c.
Resolves: rhbz1633167
With improved mirror activation code --splitmirror issue poppedup
since there was missing proper preload code and deactivation
for splitted mirror leg.
If a mirror LV is listed in read_only_volume_list, it would
still be activated rw. The activation would initially be
readonly, but the monitoring function would immediately
change it to rw. This was a regression from commit
fade45b1d1 mirror: improve table update
The monitoring function needs to copy the read_only setting
into the new set of mirror activation options it uses.
To support autoloading of VDO dm target driver loading of 'kvdo'
kernel module is needed - ATM it's not using 'dm-vdo' name.
So to support this strange name - add temporarily solution to
autoload kvdo kernel module in this case.
Basic LV functions:
activate_lv(), deactivate_lv(),
suspend_lv(), resume_lv()
were routed through the locking infrastruture on the way to:
lv_activate_with_filter(), lv_deactivate(),
lv_suspend_if_active(), lv_resume_if_active()
This commit removes the locking infrastructure from the
middle and calls the later functions directly from the former.
There were a couple of ancillary steps that the locking
infrastructure added along the way which are still included:
- critical section inc/dec during suspend/resume
- checking for active component LVs during activate
The "activation" file lock (serializing activation) has not
been kept because activation commands have been changed to
take the VG file lock exclusively which makes the activation
lock unused and unnecessary.
Different flavors of activate_lv() and lv_is_active()
which are meaningful in a clustered VG can be eliminated
and replaced with whatever that flavor already falls back
to in a local VG.
e.g. lv_is_active_exclusive_locally() is distinct from
lv_is_active() in a clustered VG, but in a local VG they
are equivalent. So, all instances of the variant are
replaced with the basic local equivalent.
For local VGs, the same behavior remains as before.
For shared VGs, lvmlockd was written with the explicit
requirement of local behavior from these functions
(lvmlockd requires locking_type 1), so the behavior
in shared VGs also remains the same.
As we start refactoring the code to break dependencies (see doc/refactoring.txt),
I want us to use full paths in the includes (eg, #include "base/data-struct/list.h").
This makes it more obvious when we're breaking abstraction boundaries, eg, including a file in
metadata/ from base/
To avoid the chance of freeing a saved vg while another
code path is using it, defer freeing saved vgs until
all the lvmcache content is dropped for the vg.
There are likely more bits of code that can be removed,
e.g. lvm1/pool-specific bits of code that were identified
using FMT flags.
The vgconvert command can likely be reduced further.
The lvm1-specific config settings should probably have
some other fields set for proper deprecation.
Shift refresh of mirror table right into monitor_dev_for_events().
Use !vg_write_lock_held() to recognize use of lvchange/vgchange.
(this shall change if this would no longer work, but requires
futher some API changes).
With this patch dm mirror table is only refreshed when necassary.
Also update WARNING message about mirror usage without monitoring
and display LV name.
In some pvmove tests, clvmd uses the new (precommitted)
saved_vg, but then requests the old saved_vg, and
expects that the new saved_vg be returned instead of
the old. So, when returning the new saved_vg, forget
the old one so we don't return it again.
After reading a VG, stash it in lvmcache as "saved_vg".
Before reading the VG again, try to use the saved_vg.
The saved_vg is dropped on VG lock operations.
The copy of the VG which clvmd stashes in lvmcache should
not only be used between suspend and resume, but between
sequential LV operations in clvmd, so that clvmd does not
need to reread the VG for each one. Prepare for that by
renaming the stashed VG as "saved_vg".
The copy of VG metadata stored in lvmcache was not being used
in general. It pretended to be a generic VG metadata cache,
but was not being used except for clvmd activation. There
it was used to avoid reading from disk while devices were
suspended, i.e. in resume.
This removes the code that attempted to make this look
like a generic metadata cache, and replaces with with
something narrowly targetted to what it's actually used for.
This is a way of passing the VG from suspend to resume in
clvmd. Since in the case of clvmd one caller can't simply
pass the same VG to both suspend and resume, suspend needs
to stash the VG somewhere that resume can grab it from.
(resume doesn't want to read it from disk since devices
are suspended.) The lvmcache vginfo struct is used as a
convenient place to stash the VG to pass it from suspend
to resume, even though it isn't related to the lvmcache
or vginfo. These suspended_vg* vginfo fields should
not be used or touched anywhere else, they are only to
be used for passing the VG data from suspend to resume
in clvmd. The VG data being passed between suspend and
resume is never modified, and will only exist in the
brief period between suspend and resume in clvmd.
suspend has both old (current) and new (precommitted)
copies of the VG metadata. It stashes both of these in
the vginfo prior to suspending devices. When vg_commit
is successful, it sets a flag in vginfo as before,
signaling the transition from old to new metadata.
resume grabs the VG stashed by suspend. If the vg_commit
happened, it grabs the new VG, and if the vg_commit didn't
happen it grabs the old VG. The VG is then used to resume
LVs.
This isolates clvmd-specific code and usage from the
normal lvm vg_read code, making the code simpler and
the behavior easier to verify.
Sequence of operations:
- lv_suspend() has both vg_old and vg_new
and stashes a copy of each onto the vginfo:
lvmcache_save_suspended_vg(vg_old);
lvmcache_save_suspended_vg(vg_new);
- vg_commit() happens, which causes all clvmd
instances to call lvmcache_commit_metadata(vg).
A flag is set in the vginfo indicating the
transition from the old to new VG:
vginfo->suspended_vg_committed = 1;
- lv_resume() needs either vg_old or vg_new
to use in resuming LVs. It doesn't want to
read the VG from disk since devices are
suspended, so it gets the VG stashed by
lv_suspend:
vg = lvmcache_get_suspended_vg(vgid);
If the vg_commit did not happen, suspended_vg_committed
will not be set, and in this case, lvmcache_get_suspended_vg()
will return the old VG instead of the new VG, and it will
resume LVs based on the old metadata.
Whenever we make visible LV out of previously invisible one,
reload it's table - the is mandator for proper udev rule
processing as well as ensure content of dm table is correct.
TODO: this new generic rule probably make extra raid rules unnecessary.
When snapshot is created in read-only mode with 'lvcreate -s -pr...',
lvm2 still needs to be able to write to layered -cow volume
to store metadata and exceptions blocks.
TODO: in some case we might be able to do full tree with read-only
volume but this probably needs futher validation:
1. checking snapshot header already exist
2. origin & snapshot are both in read-only mode.
Occasionaly users may need to peek into 'component devices.
Normally lvm2 does not let users activation component.
This patch adds special mode where user can activate
component LV in a 'read-only' mode i.e.:
lvchange -ay vg/pool_tdata
All devices can be deactivated with:
lvchange -an vg | vgchange -an....
Introduce:
lv_is_component() check is LV is actually a component device.
lv_component_is_active() checking if any component device is active.
lv_holder_is_active() is any component holding device is active.
So this is a bit more complex and possibly worth futher checking.
ATM clvmd drops cmd->mem mempool AFTER refresh of cmd.
So anything allocating from cmd->mem during toolcontext init
will likely die at some point in time.
As a quick fix - just use regular malloc/free for 'dso' alloction.
It's worth to note - cmd->libmem seems to be often misused
causing hidden memleaking for clvmd.
Build dso plugin name during segtype initialisation and just
use the string during command life-time.
Also slightlt update message verbosity and make it very_verbose
when operation is going to be made and 'verbose' when it's done.
