IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
1) Since the min|maxrecoveryrate args are size_kb_ARGs and they
are recorded (and sent to the kernel) in terms of kB/sec/disk,
we must back out the factor multiple done by size_kb_arg. This
is already performed by 'lvcreate' for these arguments.
2) Allow all RAID types, not just RAID1, to change these values.
3) Add min|maxrecoveryrate_ARG to the list of 'update_partial_unsafe'
commands so that lvchange will not complain about needing at
least one of a certain set of arguments and failing.
4) Add tests that check that these values can be set via lvchange
and lvcreate and that 'lvs' reports back the proper results.
In those places where mirrors were being created while assuming
a default segment type of "mirror", we include the '--type mirror'
argument to explicitly set the segment type. This will preserve
the mirror testing that is performed even though the default
mirroring segment type is now "raid1".
Support tests with abort when libdm encounters internal
error - i.e. for dmsetup tool.
Code execution will be aborted when
env var DM_ABORT_ON_INTERNAL_ERRORS is set to 1
When running in the context of the test framework
we need to limit our PVs to use to those created
in the framework.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Suggest to use _tdata and _tmeta devices for that.
This fixes regression from too relaxed change in
f1d5f6ae81
Without this patch there are some empty LVs created before
mirror code recognizes it cannot continue.
(in release fix)
When the merging of snapshot is finished, we need to clean dm table
intries for snapshot and -cow device. So for merging snapshot
we have to activate_lv plain 'cow' LV and let the table
resolver to its work - shortly deactivation_lv() request
will follow - in cluster this needs LV lock to be held by clvmd.
Also update a test - add small wait - if lvremove is not 'fast enough'
and merging process has not been stopped and $lv1 removed in background.
Ortherwise the following lvcreate occasionally finds name $lv1 still in use.
(in release fix)
We check the version number of dm-raid before testing certain
features to make sure they are present. However, this has
become somewhat complicated by the fact that the version #'s
in the upstream kernel and the REHL6 kernel have been diverging.
This has been a necessity because the upstream kernel has
undergone ABI changes that have necessitated a bump in the
'Y' component of the version #, while the RHEL6 kernel has not.
Thus, we need to know that the ABI has not changed but the
features have been added. So, the current version #'ing stands
as follows:
RHEL6 Upstream Comment
======|==========|========
** Same until version 1.3.1 **
------|----------|--------
N/A | 1.4.0 | Non-functional change.
| | Removes arg from mapping function.
------|----------|--------
1.3.2 | 1.4.1 | RAID10 fix redundancy validation checks.
------|----------|--------
1.3.5 | 1.4.2 | Add RAID10 "far" and "offset" algorithm support.
| | Note this feature came later in RHEL6 as part of
| | a separate update/feature.
------|----------|--------
1.3.3 | 1.5.0 | Add message interface to allow manipulation of
| | the sync_action.
| | New status (STATUSTYPE_INFO) fields: sync_action
| | and mismatch_cnt.
------|----------|--------
1.3.4 | 1.5.1 | Add ability to restore transiently failed devices
| | on resume.
------|----------|--------
1.3.5 | 1.5.2 | 'mismatch_cnt' is zero unless [last_]sync_action
| | is "check".
------|----------|--------
To simplify, writemostly/writebehind, scrubbing, and transient device
failure restoration are all tested based on the same version
requirements: (1.3.5 < V < 1.4.0) || (V > 1.5.2). Since kernel
support for writemostly/writebehind has been around for some time,
this could mean a reduction in the scope of kernels tested for this
feature. I don't view this as much of a problem, since support for
this feature was only recently added to LVM. Thus, the user would
have to be using a very recent LVM version with an older kernel.
The mismatch count reported by a dm-raid kernel target used
to be effectively random, unless it was checked after a
"check" scrubbing action had been performed. Updates to the
kernel now mean that the mismatch count will be 0 unless a
check has been performed and discrepancies had been found.
This has been the intended behaviour all along.
This patch updates the test suite to handle the change.
- lvs -o lv_attr has now 10 indicator bits
- use '--ignoremonitoring' instead of the shortcut '--ig' used before (since
it would be ambiguous with new '--ignoreactivationskip')
Update code to match lvm coding standards
Disable/skip test - since it's accessing VGs available in the system.
Before reenable - validate it's not touching any PV outside those
created during test.
Create/remove PV
Create/remove snapshots (old type & thin)
PV lookups based on name and UUID
PV resize
Signed-off-by: Tony Asleson <tasleson@redhat.com>
After the last rebase, existing unit test case was
run which uncovered a number of errors that required
attention.
Uninitialized variables and changes to type of numeric
return type were addressed.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Test the different RAID lvchange scenarios under snapshot as well.
This patch also updates calculations for where to write to an
underlying PV when testing various syncactions.
If the user would upconvert a linear LV to a mirror without specifying
the segment type ("--type mirror" vs "--type raid1"), the "mirror"
segment type would be chosen without consulting the 'default_mirror_segtype'
setting in lvm.conf. This is now used as the basis for determining
which should be used if left unspecified.
When vgname has not existed in metadata, it has crashed on double free
in format_instance destroy() - since VG was created, used FID and was
released - which also released FID, so further use was accessing bad
memory.
Fix it for this code path before release_vg() so FID will exists
when _vg_read_file_name() returns NULL.
Assumed size of 4M was too large and the test was failing because
'dd' was failing to perform its write.
Calculate the size we need to write with 'dd' instead, so we
don't overrun the device.
aux updates:
prepare_vg now created clustered VG for cluster tests.
since dm-raid doesn't work in cluster, skip the cluster
test when someone checks for dm-raid target until fixed.
Support vgsplit for VGs with thin pools and thin volumes.
In case the thin data and thin metadata volumes are moved to a new VG,
move there also all related thin volumes and check that external origins
are also present in this new VG.
Add limit for buffer so if the test is running in some loop
and generating lots of output, the output log gets too large
for browser to display (at least Firefox is quite confused
to display 300MB logs).
For now limit max output of one test to 32MB.
If there is need to see full log set LVM_TEST_UNLIMITED to
disable interruption of test.
harness now also prints max memory used during test,
it user and system time and amount of read/write operations.
For non udev path use DM_DEFAULT_NAME_MANGLING_MODE.
Skip this test when using real /dev dir, since udev is not able
to create such device name unless mangled...
This means that a test failure in one flavour no longer prevents all the
subsequent flavours from running. We also get an aggregate summary at
the end of the entire batch, instead of summaries interspersed with
progress output. Do not fail when flavour overrides are empty
This fixes a long standing regression since LVM2 2.02.74 (commit 4efb1d9c,
"Update heuristic used for default and detected data alignment.")
The default PE alignment could be used (via MAX()) even if it was
determined that the device's MD stripe width, or minimal_io_size or
optimal_io_size were not factors of the default PE alignment (either 64K
or the newer default of 1MB, etc). This bug would manifest if the
default PE alignment was larger than the overriding hint that the
device provided (e.g. default of 1MB vs optimal_io_size of 768K).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Support for exclusive activation of snapshots revealed some problems.
When snapshot is created, COW LV is activated first (for clearing) and
then it's transformed into snapshot's COW LV, but it has left the lock
for such LV active in cluster and this lock could not have been removed
from dlm, unless snapshot has been removed within same dlm session.
If the user tried to remove snapshot after rebooting node, the lock was
missing, and COW LV could not have been detached.
Patch modifes the approach in this way:
Always deactivate COW LV for clustered vg after clearing (so it's
activated again via imlicit snapshot activation rule when snapshot is activated).
When snapshot is removed, activate COW LV as independend LV, so the lock
will exist for such LV, but only when the snapshot is active.
Also add test case for testing snapshot removal after cluster reboot.
'lvchange' is used to alter a RAID 1 logical volume's write-mostly and
write-behind characteristics. The '--writemostly' parameter takes a
PV as an argument with an optional trailing character to specify whether
to set ('y'), unset ('n'), or toggle ('t') the value. If no trailing
character is given, it will set the flag.
Synopsis:
lvchange [--writemostly <PV>:{t|y|n}] [--writebehind <count>] vg/lv
Example:
lvchange --writemostly /dev/sdb1:y --writebehind 512 vg/raid1_lv
The last character in the 'lv_attr' field is used to show whether a device
has the WriteMostly flag set. It is signified with a 'w'. If the device
has failed, the 'p'artial flag has priority.
Example ("nosync" raid1 with mismatch_cnt and writemostly):
[~]# lvs -a --segment vg
LV VG Attr #Str Type SSize
raid1 vg Rwi---r-m 2 raid1 500.00m
[raid1_rimage_0] vg Iwi---r-- 1 linear 500.00m
[raid1_rimage_1] vg Iwi---r-w 1 linear 500.00m
[raid1_rmeta_0] vg ewi---r-- 1 linear 4.00m
[raid1_rmeta_1] vg ewi---r-- 1 linear 4.00m
Example (raid1 with mismatch_cnt, writemostly - but failed drive):
[~]# lvs -a --segment vg
LV VG Attr #Str Type SSize
raid1 vg rwi---r-p 2 raid1 500.00m
[raid1_rimage_0] vg Iwi---r-- 1 linear 500.00m
[raid1_rimage_1] vg Iwi---r-p 1 linear 500.00m
[raid1_rmeta_0] vg ewi---r-- 1 linear 4.00m
[raid1_rmeta_1] vg ewi---r-p 1 linear 4.00m
A new reportable field has been added for writebehind as well. If
write-behind has not been set or the LV is not RAID1, the field will
be blank.
Example (writebehind is set):
[~]# lvs -a -o name,attr,writebehind vg
LV Attr WBehind
lv rwi-a-r-- 512
[lv_rimage_0] iwi-aor-w
[lv_rimage_1] iwi-aor--
[lv_rmeta_0] ewi-aor--
[lv_rmeta_1] ewi-aor--
Example (writebehind is not set):
[~]# lvs -a -o name,attr,writebehind vg
LV Attr WBehind
lv rwi-a-r--
[lv_rimage_0] iwi-aor-w
[lv_rimage_1] iwi-aor--
[lv_rmeta_0] ewi-aor--
[lv_rmeta_1] ewi-aor--
New options to 'lvchange' allow users to scrub their RAID LVs.
Synopsis:
lvchange --syncaction {check|repair} vg/raid_lv
RAID scrubbing is the process of reading all the data and parity blocks in
an array and checking to see whether they are coherent. 'lvchange' can
now initaite the two scrubbing operations: "check" and "repair". "check"
will go over the array and recored the number of discrepancies but not
repair them. "repair" will correct the discrepancies as it finds them.
'lvchange --syncaction repair vg/raid_lv' is not to be confused with
'lvconvert --repair vg/raid_lv'. The former initiates a background
synchronization operation on the array, while the latter is designed to
repair/replace failed devices in a mirror or RAID logical volume.
Additional reporting has been added for 'lvs' to support the new
operations. Two new printable fields (which are not printed by
default) have been added: "syncaction" and "mismatches". These
can be accessed using the '-o' option to 'lvs', like:
lvs -o +syncaction,mismatches vg/lv
"syncaction" will print the current synchronization operation that the
RAID volume is performing. It can be one of the following:
- idle: All sync operations complete (doing nothing)
- resync: Initializing an array or recovering after a machine failure
- recover: Replacing a device in the array
- check: Looking for array inconsistencies
- repair: Looking for and repairing inconsistencies
The "mismatches" field with print the number of descrepancies found during
a check or repair operation.
The 'Cpy%Sync' field already available to 'lvs' will print the progress
of any of the above syncactions, including check and repair.
Finally, the lv_attr field has changed to accomadate the scrubbing operations
as well. The role of the 'p'artial character in the lv_attr report field
as expanded. "Partial" is really an indicator for the health of a
logical volume and it makes sense to extend this include other health
indicators as well, specifically:
'm'ismatches: Indicates that there are discrepancies in a RAID
LV. This character is shown after a scrubbing
operation has detected that portions of the RAID
are not coherent.
'r'efresh : Indicates that a device in a RAID array has suffered
a failure and the kernel regards it as failed -
even though LVM can read the device label and
considers the device to be ok. The LV should be
'r'efreshed to notify the kernel that the device is
now available, or the device should be 'r'eplaced
if it is suspected of failing.
'in_sync' was using the last field in the RAID status output as
the location for the sync ratio field. The sync ratio may not always
be the last field, but it will always be the 7th field. So we switch
to using the absolute value rather than computing the last field
index number.
Instead of check for lv_is_active() for thin pool LV,
query the whole pool via new pool_is_active().
Fixes a problem when we cannot change discards settings
for active pool device where the actual layer for pool
device was inactive, but thin volumes using thin pool
have been active.
Calling pvscan --cache with -aay on a PV without an MDA would spuriously fail
with an internal error, because of an incorrect assumption that a parsed VG
structure was always available. This is not true and the autoactivation handler
needs to call vg_read to obtain metadata in cases where the PV had no MDAs to
parse. Therefore, we pass vgid into the handler instead of the (possibly NULL)
VG coming from the PV's MDA.
Aux function to replace PV with specifically damaged device.
Usage:
aux error_dev "$dev1" 8:32 96:8
Replaces from 8 sector 32 error 512b sectors
and from 96 sector next 8 sectors will fail on rw.
Rest of device is preserved.
For testing:
dd if="$dev1" of=x bs=512 count=104 conv=sync,noerror iflag=direct
Commit bf2741376d started to use
lv_is_active() instead of call for lv_info & info.exists so
we cover also cluster activated devices.
For snapshost the conversion was not correct and introduced
regression by blocking creation of snapshot of inactive LV.
Fix it by assigning lv_is_active() directly.
Note: we still have minor issue to fix - to make
lv_is_???? function able to return error states since
lv_info() may fail.
I'm not sure what 'BUG's were being encountered when the restriction
to limit lvconvert-raid.sh tests to kernels > 3.2 was added. I do know
that there were BUG's that could be triggered when testing snapshots and
some of the earliest DM RAID available in the kernel. I've taken out
the 3.2 kernel restriction and added a dm-raid >= 1.2 restriction instead.
This will allow the test to run on patched production kernels.
Reset counter after thin pool resize failure.
If the pool goes above threshold, support unmounting
of all thin volumes if the lvextend fails to avoid
overfilling of the pool.
When valgrind usage is desired by user (--enable-valgrind-pool)
skip playing/closing/reopenning with descriptors - it makes
valgridng useless.
Make sleep delay for clvmd start longer.
Commit 3501f17fd0 enables a limited set
of metadata updates for partial LV/VGs when issuing lvchange or vgchange.
These tests verify those changes operate as intended.
Separate original raid test and new raid10 test,
so the old could be tested on platforms without raid10 support.
Replace test-unfriendly `ls /dev/mapper` with dmsetup ls
Revert changes to origin lvcreate-large test and use separate
test scripts for raid - so they can be properly skipped when
kernel doesn't support raid targets.
MD's bitmaps can handle 2^21 regions at most. The RAID code has always
used a region_size of 1024 sectors. That means the size of a RAID LV was
limited to 1TiB. (The user can adjust the region_size when creating a
RAID LV, which can affect the maximum size.) Thus, creating, extending or
converting to a RAID LV greater than 1TiB would result in a failure to
load the new device-mapper table.
Again, the size of the RAID LV is not limited by how much space is allocated
for the metadata area, but by the limitations of the MD bitmap. Therefore,
we must adjust the 'region_size' to ensure that the number of regions does
not exceed the limit. I've added code to do this when extending a RAID LV
(which covers 'create' and 'extend' operations) and when up-converting -
specifically from linear to RAID1.
When reformatting the 'lvchange_resync' code in commit
05131f5853, a '!' should have been removed
from the condition that checks for the LV_NOTSYNCED flag on a corelog
mirror LV. The presence of this '!' caused the LV_NOTSYNCED flag to be
cleared when it wasn't present and left when it was present.
It is not allowed to add images to a 'mirror' or 'raid1' LV if the
LV_NOTSYNCED flag is set. We add some up-convert tests to ensure this
behavior is being enforced and that the LV_NOTSYNCED flag is being
properly cleared by 'lvchange --resync'.
(Not updating WHATS_NEW because this is intrarelease.)
This patch adds support for RAID10. It is not the default at this
stage. The user needs to specify '--type raid10' if they would like
RAID10 instead of stacked mirror over stripe.
- logging is not controlled by "levels" but by "types"; types are
independent of each other... implementation of the usual "log level"
user-level semantics can be simply done on top; the immediate
application is enabling/disabling wire traffic logging independently
of other debug data, since the former is rather bulky and can easily
obscure almost everything else
- all logs go to "outlets", of which we currently have 2: syslog and
stderr; which "types" go to which "outlets" is entirely configurable
Commit 8767435ef8 allowed RAID 4/5/6
LV to be extended properly, but introduced a regression in device
replacement - a critical component of fault tolerance.
When only 1 or 2 drives are being replaced, the 'area_count' needed
can be equal to the parity_count. The 'area_multiple' for RAID 4/5/6
was computed as 'area_count - parity_devs', which could result in
'area_multiple' being 0. This would ultimately lead to a division by
zero error. Therefore, in calc_area_multiple, it is important to take
into account the number of areas that are being requested - just as
we already do in _alloc_init.
Reducing a RAID 4/5/6 LV or extending it with a different number of
stripes is still not implemented. This patch covers the "simple" case
where the LV is extended with the same number of stripes as the orginal.
When mirrors are up-converted, a transient mirror layer is put in so that
only the new devices are sync'ed. That transient layer must carry the tags
of the original mirror LV, otherwise it will fail to activate when activation
is regulated by lvm.conf:activation/volume_list. The conversion would then
fail.
The fix is to do exactly the same thing that is being done for linear ->
mirror converting (lib/metadata/mirror.c:_init_mirror_log()). We copy the
tags temporarily for the new LV and remove them after the activation.
Snapshots of RAID logical volumes are allowed (including "raid1"). However,
snapshots of "mirror" logical volumes has been disallowed due to unsolvable
issues inherent to the design. The fact that mirroring (dm-raid1.c) must
stop all I/O as the result of a failure and wait for userspace intervention
can lead to a circular dependency if userspace is simultaneously waiting for
snapshots (on mirrors) to make an I/O update before proceeding.
Various snapshot on mirror tests have been removed as a result.
Add make help target.
Add LVM_TEST_PARALLEL to support parallel runs of tests
Work around the problem the dmsetup table/info may return error
by using dmtable and dminfo function that will use 'should'.
(Error happens when some concurently running process removes table
entry while dmsetup command resolves table entries inside the loop.)
Make the teardown really usable - it will try down to remove all the left
devices even from previous test runs
(the only missing piece is probably proper mdadm teardown)
Add few more local vars
Try to setup PATH and LD_LIBRARY_PATH just once.
Try shorter sleeps.
Actually restart was failing for different reason - so pass in proper
location of dmeventd for restart from lvm command and avoid using
the one from /sbin location.
Update pv create test with "" around path.
Indent
Shell improvements - use internal function for checks
Use PVs in "" (LV and VG cannot have spaces)
Several test very starting 'dmeventd' without annoucing
it via prepade_dmeventd.
Fix some of test actually.
Indent
Better shell usage
Function simplification
More usage of 'get' functions
Don't use valgrind tracing for check and get function (faster)
Update shell debugging (PS4, better stacktrace)
Support paths with spaces
Export SCRIPTNAME for external usage
Watch for dmeventd unexpectedly started during test
Indent
Add valgrind support:
env LVM_TEST_VALGRIND={0123} (the higher level, more commands tested)
env LVM_TEST_CLVMD=1 runs clvmd within valgrind.
env VALGRIND script name executed for each lvm command (def. is valg).
Smarted teardown - should minimize occurence of left dev entries
(using dmsetup remove -f only as last resort)
sort removed devices by open count before actual removal
Use "" around string that may contain spaces.
Set log/verbose and activation/retry_deactivation to defined value.
Remove debug.log after successful lvm command (easier to check output).
Currently we could not test special prefixes in our test suite.
As teardown will not find such device and basicaly busyloops here,
as at cannot remove such names.
This patch adds possibity to use:
vgcreate V_$vg1 $dev
Note: you still need to use $PREFIX somewhere in the name.
(And of course, it's really bad idea to use $PREFIX (=LVMTEST)
for normally used LVs)
The only purpose of this patch is to allow testing cluster with
special vg names that begins with V_ , P_....
When down-converting a RAID1 device, it is the last device that is extracted
and removed when the user does not specify a particular device. However,
when a device is specified (and it is not the last), the device is removed and
the remaining sub-LVs are "shifted down" to fill the hole. This cause problems
when resuming the LV because if the shifted devices were resumed (and thus
renamed) before the sub-LV being extracted, there would be a name conflict.
The solution is to resume the extracted sub-LVs first so that they can be
properly renamed preventing a possible conflict.
This addresses bug 801967.
Support timestamping with harness - using VERBOSE=2
Fix also logging in several situation
(i.e. continue logging multiple test in VERBOSE mode,
do not coredump with empty output).
Test if thin_check is present in system and disable its use, when its missing.
Add testing for poolmetadatasize.
FIXME: Allocation policy for metadata pool might need some relaxing.
(For now it needs to put all block on one PV.)
Reduce disc excercise for some test and focus on LVM testing by
using smaller extent size.
Reduce number of teardown_devs calls and use vg/lvremove instead.
Don't sleep for seconds on pvmove.
FIXME: shell/lvconvert-mirror-basic.sh seems to need more checking.
Test fails for smalled extent size then 512k.
make devices invisible to lvm, but the behaviour of those is slightly different
than of actual missing devices. Running vgscan after re-enabling the device
triggers a metadata repair which is not done by vgremove -ff. This is not a
regression, merely an odd behaviour that has been around even before lvmetad.
Replace asserts with test for failing memory allocation.
Add at least stack traces.
Index counter starts from 1 (0 reserved for error), so replacing fingerprint.
Failure to do so results in "Performing unsafe table load while X device(s) are
known to be suspended" errors. While fixing the problem in this way works and
is consistent with the way the mirror segment type does it, it would be nice
to find a solution that uses the generic suspend/resume calls.
Also included in this check-in are additions to the test suite that perform
conversions on RAID LVs under a snapshot. These tests are disabled for the
time being due to a kernel bug that is yet to be tracked down.
Cleanup generated files from coverage testing.
Do not skip standard .o compilation for lib/not and lib/harness.
Make a bit longer string in harness to fit new shell/ in.
Simplify /api makefile and use SUBDIRS target for test dir.
Properly cleanup Makefiles with distclean in /test.
Use symbolic links for shell scripts for non-srcdir compilation.
bitset_t.c:39: warning: 'last' may be used uninitialized in this function
Compiler is not smart enough to see the code path which avoid using
unitialized 'last'.
tests from unit-tests/*/*_t.c (now under test/unit). The valgrind/pool test is
missing, since it's not really a unit test and probably not too valuable
either. Available via "make unit" (and if --enable-testing was passed to
configure, also executed by make check).
Removal of an inactive origin removes also all related snapshots.
When we now support 'old' external snapshots with thin volumes,
removal of pool will not only drop all thin volumes, but as
a consequence also all snapshots - which might be seen a bit
unexpected for the user - so add a query to confirm such action.
lvremove -f will skip the prompt.
grep need -F to check what we really want to test.
Add better test for existing device.
Currently this test DOES NOT work with real /dev handle via udev
since our tool does not see such device listet through udev.
FIXME: We might be able to see it at least through dmsetup table and
use for lvm.
Example:
~> lvconvert --type raid1 vg/mirror_lv
Steps to convert "mirror" to "raid1"
1) Allocate a RAID metadata LV for each mirror image from the same PVs
on which they are located.
2) Clear the metadata LVs. This involves writing LVM metadata, so we don't
change any aspects of the mirror LV before this so that the user can easily
remove LVs from the failed convert attempt while retaining the original
mirror.
3) Remove the mirror log, if it exists.
4) Add metadata LVs to mirror LV
5) Rename mirror sub-lvs (s/mimage/rimage/)
6) Change flags and segtype from mirror to raid1
Example:
~> lvconvert --type raid1 -m 1 vg/lv
The following steps are performed to convert linear to RAID1:
1) Allocate a metadata device from the same PV as the linear device
to provide the metadata/data LV pair required for all RAID components.
2) Allocate the required number of metadata/data LV pairs for the
remaining additional images.
3) Clear the metadata LVs. This performs a LVM metadata update.
4) Create the top-level RAID LV and add the component devices.
We want to make any failure easy to unwind. This is why we don't create the
top-level LV and add the components until the last step. Should anything
happen before that, the user could simply remove the unnecessary images. Also,
we want to ensure that the metadata LVs are cleared before forming the array to
prevent stale information from polluting the new array.
A new macro 'seg_is_linear' was added to allow us to distinguish linear LVs
from striped LVs.
The problem as reported by "ben <benscott@nwlink.com>" on lvm-devel:
vgsplit fails with mirrored mirror log
#lvs --all -o lv_name,lv_attr,devices
LV Attr Devices
MyMirror mwi--
[MyMirror_mimage_0] Iwi--- /dev/sdq(0)
[MyMirror_mimage_1] Iwi--- /dev/sdo(0)
[MyMirror_mimage_2] Iwi--- /dev/sdi(0)
[MyMirror_mlog] mwi---
[MyMirror_mlog_mimage_0] Iwi--- /dev/sds(0)
[MyMirror_mlog_mimage_1] Iwi--- /dev/sde(0)
#vgsplit -v "TestA" "TestB" "/dev/sdq" "/dev/sdo" "/dev/sdi" "/dev/sds"
"/dev/sde"
Checking for volume group "TestA"
Checking for new volume group "TestB"
Archiving volume group "TestA" metadata (seqno 213).
Can't split mirror MyMirror between two Volume Groups
AFTER FIX:
[root@bp-01 ~]# lvs -a -o name,vg_name,devices vg new
Volume group "new" not found
Skipping volume group new
LV VG Devices
lv vg lv_mimage_0(0),lv_mimage_1(0)
[lv_mimage_0] vg /dev/sdb1(0)
[lv_mimage_1] vg /dev/sdc1(0)
[lv_mlog] vg lv_mlog_mimage_0(0),lv_mlog_mimage_1(0)
[lv_mlog_mimage_0] vg /dev/sdh1(0)
[lv_mlog_mimage_1] vg /dev/sdi1(0)
[root@bp-01 ~]# vgsplit vg new /dev/sd[bchi]1
New volume group "new" successfully split from "vg"
[root@bp-01 ~]# lvs -a -o name,vg_name,devices vg new
LV VG Devices
lv new lv_mimage_0(0),lv_mimage_1(0)
[lv_mimage_0] new /dev/sdb1(0)
[lv_mimage_1] new /dev/sdc1(0)
[lv_mlog] new lv_mlog_mimage_0(0),lv_mlog_mimage_1(0)
[lv_mlog_mimage_0] new /dev/sdh1(0)
[lv_mlog_mimage_1] new /dev/sdi1(0)
Since execve passed only NULL as environ, we had lost all environment vars on
restart - thus actually running 'different' clvmd then the one at start.
Preserving environ allows to restart clvmd with the same settings
(i.e. LD_LIBRARY_PATH)
Add test for second restart.
Add named cluster_ops to easily learn the name of the active cluster manager,
so we are able to restart singlenode manager in testing.
Add simple test for clvmd -S (restart) and -R (refresh)
(though it needs some extensions).
When running tests it might be useful to have an override option when
testing on real /dev and some broken system (i.e. Debian and its rules).
So one can use:
LVM_TEST_DEVDIR=/dev LVM_VERIFY_UDEV=1 make check
When read in drain returned <0 value, terminal content has been trashed.
Remove unneeded memset() and use whole buffer.
Free readbuf before exit (valgrind).
Test whether nodes could be used on given filesystem where TMP
dir is being used and skip teardown quicker in fail case.
(makes the problem quickly obvious if you try to such fs).
Skip teardown_dev if we have not created any devs yet.
and do not mkdir /dev/mapper dir when LVM_TEST_DEVDIR is set.
Drop this test from t-000-basic.sh.
It seems like test-suite is significantly slowed down on removal phase.
Maybe it should be part of generic teardown - though the reason of slowdown
should be also discovered - probably related to retry loop ?
When the srcdir == builddir we get the link on non-exectable file.
So make always sure fsadm.sh is executable script file.
Add cleanup target for lib/fsadm.
Currently test is skipped by default (since it needs code hack to work)
Check command line options to create & remove thin pools and thin volumes.
Activation code for thin LV support is missing, thus it only works without
driver loaded.
Some major distributions are still using 'mawk' and they are not using
the latest version - we end here with hidden dependency on the latest
version of mawk (1.3.4) while i.e. Debian Lenny seems to stay with 1.3.3.
So we end with completely broken vgimportclone script on such system.
We would need to check for proper support of :space: and abort build if
it doesn't work or simplier replace [:space:] with [ \t] which seems
sufficient to make it work (as can be seen in this patch)
A better fix would be to use command line parameter override - leaving
as FIXME comment.
This patch makes t-vgimportclone.sh test passing on Lenny.
daemon/common code in a single libdaemon.a, which is completely private. This
is currently linked into the lvmetad binary, and will be linked into LVM (the
client part, since static linking only picks up only symbols that are actually
used). I have also added --enable/disable-lvmetad to ./configure; although the
current default is off, I expect this to be flipped to on shortly. There's no
LVM-side support yet, but when there is, even when built, it'll still need to
be enabled by an lvm.conf option.
There is duplicate code in t-lvconvert-raid.sh and t-lvcreate-raid.sh.
This should be moved into a common file which is then sourced by these two
files. I'll wait to move the duplicate code until I can talk to mornfall.
Add config option to enable crc checking of VG structures.
Currently it's disabled by default.
For the internal test-suite this check it is enabled.
Note: In the case the internal error is detected, debug build with
compile option DEBUG_ENFORCE_POOL_LOCKING helps to catch the source
of the problem.
where the naming is left completely on lvm.
(Commited code has been different version of test).
So here it should be able to figure out new free name and create a new LV.
device that has been brought back from the dead: this sometimes fails with
clvmd (the cache is updated "too soon"). Instead, force a pvscan and rely on an
up-to-date cache as usual.
Since some test may leave devices in suspend mode which would require
carefull order of resume operation - use '-f' to replace them with
error targets
For disable_dev - when 'error' target is used for open count - treat
return code as ok (|| true) to avoid breaking futher test processing.
