IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
TODO:
It seems commit 7e685e6c70
has changed the old logic, when 'pvs device_name' used
to work. (regression from 2.02.104)
Currently put in extra pvscan.
We need to use "--verifyudev" for dmsetup mangle command used in
the name-mangling test since without the --verifyudev, we'd end up
with the failed rename.
Also, add direct check for the dev nodes - node with old name must
be gone and node with new name must be present. Before, we checked
just the output of the command.
One bug popped up here when renaming with udev and libdevmapper
fallback checking the udev when target mangle mode is "none"
(fixme added in the libdevmapper's node rename code).
It's not so easy to recongnize unusable /dev/kmsg
Reorder the code in a way if the first regular read of /dev/kmsg
fail, fallback to klogctl interface.
Call drain_dmesg also for the case there is no user log output.
Add a bit more complexity here - Switch to use /dev/kmsg
which has been introduced in 3.5 kernels and could run without
lossing lines from /proc/kmsg.
On older systems user may set env var LVM_TEST_CAN_CLOBBER_DMESG=1
to get kernel messages via klogctl() call (which deletes dmesg buffer)
otherwise no logging of kernel messages is provided.
Since there could be multiple readers of kmsg (test & journald) it needs
to be fast, to capture things like sysrq trace.
But to capture whole output it would need to prioritize reading of kmsg,
thus we would first log kernel messages and followed by command output.
As a trade-off always log command output first and use large drain
buffer so is captures most of messages, but occasionaly miss some
lines.
Use separate files for raid1, raid456, raid10.
They need different target versions to work, so support
more precise test selection.
Optimize duplicate tests of target avalability and skip
unsupported test cases sooner.
Basically reverts commit af8580d756.
"test: Use klogctl in the harness instead of reading /var/log/messages."
Problem is - this interface clears dmesg buffer
(just like call of dmesg -c)
Thus after running lvm2 test suitedmesg is empty - while all the
messages are usually logged in the journal/message, it's still not nice to
clear dmesg buffer.
It's not a pure revert, but switch to use /proc/kmsg directly instead of
reading /var/log/messages.
In cases where PV appears on a new device without disappearing from an old one
first, the device->pvid pointers could become ambiguous. This could cause the
ambiguous PV to be lost from the cache when a different PV comes up on one of
the ambiguous devices.
This is probably not optimal, but makes the lvmetad case mimic non-lvmetad code
more closely. It also fixes vgremove of a partially corrupt VG with lvmetad, as
_vg_write_raw (and consequently, entire vg_write) currently panics when it
encounters a corrupt MDA. Ideally, we'd be able to explicitly control when it is
safe to ignore them.
%FREE allocation has been broken for RAID. At 100%FREE, there is
still an extent left for certain tests. For now, change the test
to warn rather than completely fail.
Condition was swapped - however since it's been based on 'random'
memory content it's been missed as attribute has not been set.
So now we have quite a few possible results when testing.
We have old status without separate metadata and
we have kernels with fixed snapshot leak bug.
(in-release update)
Code uses target driver version for better estimation of
max size of COW device for snapshot.
The bug can be tested with this script:
VG=vg1
lvremove -f $VG/origin
set -e
lvcreate -L 2143289344b -n origin $VG
lvcreate -n snap -c 8k -L 2304M -s $VG/origin
dd if=/dev/zero of=/dev/$VG/snap bs=1M count=2044 oflag=direct
The bug happens when these two conditions are met
* origin size is divisible by (chunk_size/16) - so that the last
metadata area is filled completely
* the miscalculated snapshot metadata size is divisible by extent size -
so that there is no padding to extent boundary which would otherwise
save us
Signed-off-by:Mikulas Patocka <mpatocka@redhat.com>
While stripe size is twice the physical extent size,
the original code will not reduce stripe size to maximum
(physical extent size).
Signed-off-by: Zhiqing Zhang <zhangzq.fnst@cn.fujitsu.com>
Switch to use ext2 to make it usable on older systems.
Previous test has not been able to catching problem.
Multiple tests are now put in.
FIXME: validate what is doing kernel target when
the header is undeleted and same chunk size is used.
It seems snapshot target successfully resumes and
just complains COW is not big enough:
kernel: dm-8: rw=0, want=40, limit=24
kernel: attempt to access beyond end of device
When chunk size is different it fails instantly.
For checking this with lvm2 and this test case use this patch:
--- a/tools/lvcreate.c
+++ b/tools/lvcreate.c
@@ -769,7 +769,7 @@ static int _read_activation_params(struct
lvcreate_params *lp,
lp->permission = arg_uint_value(cmd, permission_ARG,
LVM_READ | LVM_WRITE);
- if (lp->snapshot) {
+ if (0 && lp->snapshot) {
/* Snapshot has to zero COW header */
lp->zero = 1;
lp->wipe_signatures = 0;
---
and switch to use -c 4 for both snapshots
When read-only snapshot was created, tool was skipping header
initialization of cow device. If it happened device has been
already containing header from some previous snapshot, it's
been 'reused' for a newly created snapshot instead of being cleared.
Skip over LVs that have a cache LV in their tree of LV dependencies
when performing a pvmove.
This means that users cannot move a cache pool or a cache LV's origin -
even when that cache LV is used as part of another LV (e.g. a thin pool).
The new test (pvmove-cache-segtypes.sh) currently builds up various LV
stacks that incorporate cache LVs. pvmove tests are then performed to
ensure that cache related LVs are /not/ moved. Once pvmove is enabled
for cache, those tests will switch to ensuring that the LVs /are/
moved.
Test currently fails with make check_cluster - so uses 'should'
CLVMD[4f435880]: Feb 19 23:27:36 Send local reply
format_text/archiver.c:230 WARNING: This metadata update is NOT backed up
metadata/mirror.c:1105 Failed to initialize log device
metadata/mirror.c:1145 <backtrace>
lvconvert.c:1547 <backtrace>
lvconvert.c:3084 <backtrace>
Remove 'skip' argument passed into the function.
We always used '0' - as this is the only supported
option (-K) and there is no complementary option.
Also add some testing for behaviour of skipping.
There are typically 2 functions for the more advanced segment types that
deal with parameters in lvcreate.c: _get_*_params() and _check_*_params().
(Not all segment types name their functions according to this scheme.)
The former function is responsible for reading parameters before the VG
has been read. The latter is for sanity checking and possibly setting
parameters after the VG has been read.
This patch adds a _check_raid_parameters() function that will determine
if the user has specified 'stripe' or 'mirror' parameters. If not, the
proper number is computed from the list of PVs the user has supplied or
the number that are available in the VG. Now that _check_raid_parameters()
is available, we move the check for proper number of stripes from
_get_* to _check_*.
This gives the user the ability to create RAID LVs as follows:
# 5-device RAID5, 4-data, 1-parity (i.e. implicit '-i 4')
~> lvcreate --type raid5 -L 100G -n lv vg /dev/sd[abcde]1
# 5-device RAID6, 3-data, 2-parity (i.e. implicit '-i 3')
~> lvcreate --type raid6 -L 100G -n lv vg /dev/sd[abcde]1
# If 5 PVs in VG, 4-data, 1-parity RAID5
~> lvcreate --type raid5 -L 100G -n lv vg
Considerations:
This patch only affects RAID. It might also be useful to apply this to
the 'stripe' segment type. LVM RAID may include RAID0 at some point in
the future and the implicit stripes would apply there. It would be odd
to have RAID0 be able to auto-determine the stripe count while 'stripe'
could not.
The only draw-back of this patch that I can see is that there might be
less error checking. Rather than informing the user that they forgot
to supply an argument (e.g. '-i'), the value would be computed and it
may differ from what the user actually wanted. I don't see this as a
problem, because the user can check the device count after creation
and remove the LV if they have made an error.
When an origin exists and the 'lvcreate' command is used to create
a cache pool + cache LV, the table is loaded into the kernel but
never instantiated (suspend/resume was never called). A user running
LVM commands would never know that the kernel did not have the
proper state unless they also ran the dmsetup 'table/status' command.
The solution is to suspend/resume the cache LV to make the loaded
tables become active.
Introduce a new parameter called "approx_alloc" that is set when the
desired size of a new LV is specified in percentage terms. If set,
the allocation code tries to get as much space as it can but does not
fail if can at least get some.
One of the practical implications is that users can now specify 100%FREE
when creating RAID LVs, like this:
~> lvcreate --type raid5 -i 2 -l 100%FREE -n lv vg
Replace some in-test use of lvs commands with their check
and get equivalent.
Advantage is these 'checking' commands are not necessarily always
valiadated via extensive valgrind testing and also the output noice
is significantly reduces since the output of check/get is suppressed.
This patch allows users to create cache LVs with 'lvcreate'. An origin
or a cache pool LV must be created first. Then, while supplying the
origin or cache pool to the lvcreate command, the cache can be created.
Ex1:
Here the cache pool is created first, followed by the origin which will
be cached.
~> lvcreate --type cache_pool -L 500M -n cachepool vg /dev/small_n_fast
~> lvcreate --type cache -L 1G -n lv vg/cachepool /dev/large_n_slow
Ex2:
Here the origin is created first, followed by the cache pool - allowing
a cache LV to be created covering the origin.
~> lvcreate -L 1G -n lv vg /dev/large_n_slow
~> lvcreate --type cache -L 500M -n cachepool vg/lv /dev/small_n_fast
The code determines which type of LV was supplied (cache pool or origin)
by checking its type. It ensures the right argument was given by ensuring
that the origin is larger than the cache pool.
If the user wants to remove just the cache for an LV. They specify
the LV's associated cache pool when removing:
~> lvremove vg/cachepool
If the user wishes to remove the origin, but leave the cachepool to be
used for another LV, they specify the cache LV.
~> lvremove vg/lv
In order to remove it all, specify both LVs.
This patch also includes tests to create and remove cache pools and
cache LVs.
Avoid starting conversion of the LV to the thin pool and thin volume
at the same time. Since this is mostly a user mistake, do not try
to just convert to one of those type, since we cannot assume if the
user wanted LV to become thin volume or thin pool.
Before the fix tool reported pretty strange internal error:
Internal error: Referenced LV lvol1_tdata not listed in VG mvg.
Fixed output:
lvconvert --thinpool lvol0 -T mvg/lvol0
Can't use same LV mvg/lvol0 for thin pool and thin volume.
Since we are currently incapable of providing zeroes for
reextended thin volume area, let's disable extension of
such already reduce thin volumes.
(in-release change)
When lvm2 command forks, it calls reset_locking(),
which as an unwanted side effect unlinked lock file from filesystem.
Patch changes the behavior to just close locked file descriptor
in children - so the lock is being still properly hold in the parent.
Test LVM_LVMETAD_PIDFILE for pid for lvm command.
Fix WHATS_NEW envvar name usage
Fix init order in prepare_lvmetad to respect set vars
and avoid clash with system settings.
Update test to really test the 'is running' message.
Thin kernel target 1.9 still does not support online resize of
thin pool metadata properly - so disable it with expectation
for much higher version - and reenable after fixing kernel.
If we are stuck in user for too long without output,
grab kernel stack traces.
If we just produce too many lines of output, it's
not probably kernel related bug.
When the test is interrupted because debug.log has got to big,
and the test doesn't react on SIGINT - and needs to be only
killed with SIGKILL - it's still valuable to print at least
a portion of this debug.log (currently 4MB).
LVM_TEST_UNLIMITED could be set to avoid this limitation
(i.e. when busy-looping lvm command needs to be running
for gdb attachment)
Make it easier to run a live lvmetad in debugging mode and
to avoid conflicts if multiple test instances need to be run
alongside a live one.
No longer require -s when -f is used: use built-in default.
Add -p to lvmetad to specify the pid file.
No longer disable pidfile if -f used to run in foreground.
If specified socket file appears to be genuine but stale, remove it
before use.
On error, only remove lvmetad socket file if created by the same
process. (Previous code removes socket even while a running instance
is using it!)
Do not use signature wiping for newly created LVs in tests - we're
reusing the devs in tests and such detection could just interfere
inappropriately. We'd need to modify all tests to anwer the prompt
whether any signature found should be removed or not or we'd need
to use "-y" option for all lvcreates in tests. It's better to disable
this feature then and let's do a separate test to test this signature
wiping functionality.
Changed naming of methods from camel case to all lower case with
underscores per guidelines. Changed any methods that can be
static methods to static.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
3.12.0 kernel prevents raid test to be usable,
leaving unremovable devices in table.
This needs to be fixed ASAP, meanwhile disable test to make
test machines at least usable.
Add 'can_use_16T' to detect systems where we could
safely use 16T devices without causing system deadlocks.
16T size leads on those to endless loops in udevd
- it calls blkid which tries cached read from such device
- this ends in endless loop.
Related problems:
https://bugzilla.redhat.com/show_bug.cgi?id=1015028
Reverts previously added udevsettle call.
Seems to be unrelated, while udev on old system may take over 10
minutes, to finish it's very slow and CPU intensive work, it doesn't
interact directly with created device, only access /dev/mapper/control
node via dmsetup, so the device is ocasionaly blocked by something else.
Patch helps a bit when lvm2 is build with disabled udev_sync support,
but udevd runs in the system - so it randomly influences unrelated tests
even - so before every test wait at least till udevd is settled.
Initial testing of thin pool's metadata with thin repairing tools.
Try to use tools from configuration settings, but allow them
to be overriden by settings of these variables:
LVM_TEST_THIN_CHECK_CMD,
LVM_TEST_THIN_DUMP_CMD,
LVM_TEST_THIN_REPAIR_CMD
FIXME: test reveals some more important bugs:
pvremove -ff also needs --yes
vgremove -ff doesn not remove metadata when there are no real LVs.
vgreduce is not able to reduce VG with pool without pool's PVs
Reshape code a bit to make sockepair 'swappable' with plain old pipe
call.
Display status for FAILED error.
Increase buffer to hold always at least 1 page size.
Print error results with capitals.
1) When converting from an x-way mirror/raid1 to a y-way mirror/raid1,
the default behaviour should be to stay the same segment type.
2) When converting from linear to mirror or raid1, the default behaviour
should honor the mirror_segtype_default.
3) When converting and the '--type' argument is specified, the '--type'
argument should be honored.
catch such conditions, but errors in the tests caused the issue to go
unnoticed. The code has been fixed to perform #2 properly, the tests
have been corrected to properly test for #2, and a few other tests
were changed to explicitly specify the '--type mirror' when necessary.
A know issue with kmem_cach is causing failures while testing
RAID 4/5/6 device replacement. Blacklist the offending kernel
so that these tests are not performed there.
Since our current vgcfgbackup/restore doesn't deal
with difference of active volumes between current and
restored set of volumes - run test with inactive LVs.
Rewrite check lv_on and add new lv_tree_on
Move more pvmove test unrelated code out to check & get sections
(so they do not obfuscate trace output unnecesserily)
Use new lv_tree_on()
NOTE: unsure how the snapshot origin should be accounted here.
Split pmove-all-segments into separate tests for raid and thins
(so the test output properly shows what has been skipped in test)
Update usage of "" around shell vars.
trim needs to trim both sides now.
trim also removes debug.log since it's only called when lvm command
has finished properly (so if something fails afterward, there
is no missleading debug trace in the log)
'die' evaluates given string - so \n could be used for
multiline error report
Also remove debug.log since the command finished properly when we
call 'die'
Note: we should not call 'die' after lvm command failure.
lvchange-raid.sh checks to ensure that the 'p'artial flag takes
precedence over the 'w'ritemostly flag by disabling and reenabling
a device in the array. Most of the time this works fine, but
sometimes the kernel can notice the device failure before it is
reenabled. In that case, the attr flag will not return to 'w', but
to 'r'efresh. This is because 'r'efresh also takes precedence over
the 'w'ritemostly flag. So, we also do a quick check for 'r' and
not just 'w'.
Add a very simple hack for embeding /var/log/messages into
the tests output - it's not ideal since it sometimes breaks lines,
but still gives valuable info.
The same corner cases that exist for snapshots on mirrors exist for
any logical volume layered on top of mirror. (One example is when
a mirror image fails and a non-repair LVM command is the first to
detect it via label reading. In this case, the LVM command will hang
and prevent the necessary LVM repair command from running.) When
a better alternative exists, it makes no sense to allow a new target
to stack on mirrors as a new feature. Since, RAID is now capable of
running EX in a cluster and thin is not active-active aware, it makes
sense to pair these two rather than mirror+thinpool.
As further background, here are some additional comments that I made
when addressing a bug related to mirror+thinpool:
(https://bugzilla.redhat.com/show_bug.cgi?id=919604#c9)
I am going to disallow thin* on top of mirror logical volumes.
Users will have to use the "raid1" segment type if they want this.
This bug has come down to a choice between:
1) Disallowing thin-LVs from being used as PVs.
2) Disallowing thinpools on top of mirrors.
The problem is that the code in dev_manager.c:device_is_usable() is unable
to tell whether there is a mirror device lower in the stack from the device
being checked. Pretty much anything layered on top of a mirror will suffer
from this problem. (Snapshots are a good example of this; and option #1
above has been chosen to deal with them. This can also be seen in
dev_manager.c:device_is_usable().) When a mirror failure occurs, the
kernel blocks all I/O to it. If there is an LVM command that comes along
to do the repair (or a different operation that requires label reading), it
would normally avoid the mirror when it sees that it is blocked. However,
if there is a snapshot or a thin-LV that is on a mirror, the above code
will not detect the mirror underneath and will issue label reading I/O.
This causes the command to hang.
Choosing #1 would mean that thin-LVs could never be used as PVs - even if
they are stacked on something other than mirrors.
Choosing #2 means that thinpools can never be placed on mirrors. This is
probably better than we think, since it is preferred that people use the
"raid1" segment type in the first place. However, RAID* cannot currently
be used in a cluster volume group - even in EX-only mode. Thus, a complete
solution for option #2 must include the ability to activate RAID logical
volumes (and perform RAID operations) in a cluster volume group. I've
already begun working on this.
Creation, deletion, [de]activation, repair, conversion, scrubbing
and changing operations are all now available for RAID LVs in a
cluster - provided that they are activated exclusively.
The code has been changed to ensure that no LV or sub-LV activation
is attempted cluster-wide. This includes the often overlooked
operations of activating metadata areas for the brief time it takes
to clear them. Additionally, some 'resume_lv' operations were
replaced with 'activate_lv_excl_local' when sub-LVs were promoted
to top-level LVs for removal, clearing or extraction. This was
necessary because it forces the appropriate renaming actions the
occur via resume in the single-machine case, but won't happen in
a cluster due to the necessity of acquiring a lock first.
The *raid* tests have been updated to allow testing in a cluster.
For the most part, this meant creating devices with '-aey' if they
were to be converted to RAID. (RAID requires the converting LV to
be EX because it is a condition of activation for the RAID LV in
a cluster.)
Simulate crash of the system and restarted pvmove after next VG
activation.
Test is catching regression introduced in 2.02.99 for partial tree
creation changes.
Function to create slower responsive device.
Useful for testing things which needs to happen something during on
going operation - with 'delayed' device - much smaller sizes of devices
are needed and its much more deterministic (though still not optimal)
After enable_dev, the following commands were not
consistently seeing the pv on it.
Alasdair explained, "whenever enabling/disabling devs
outside the tools (and you aren't trying to test how
the tools cope with suddenly appearing/disappering
devices) use "vgscan""
The original "check" target stays confined to a local device directory, while
check_full does 6 flavours, 3 with a local device directory and 3 with the
global /dev directory (the latter are prefixed with "s" for
"system"). I.e.: normal, cluster, lvmetad, snormal, scluster, slvmetad.
Patch includes RAID1,4,5,6,10 tests for:
- setting writemostly/writebehind
* syncaction changes (i.e. scrubbing operations)
- refresh (i.e. reviving devices after transient failures)
- setting recovery rate (sync I/O throttling)
while the RAID LVs are under a thin-pool (both data and metadata)
* not fully tested because I haven't found a way to force bad
blocks to be noticed in the testsuite yet. Works just fine
when dealing with "real" devices.
Test moving linear, mirror, snapshot, RAID1,5,10, thinpool, thin
and thin on RAID. Perform the moves along with a dummy LV and
also without the dummy LV by specifying a logical volume name as
an argument to pvmove.
These test the toollib functions that select
vgs/lvs to process based on command line args:
empty, vg name(s), lv names(s), vg tag(s),
lv tags(s), and combinations of all.
1) Since the min|maxrecoveryrate args are size_kb_ARGs and they
are recorded (and sent to the kernel) in terms of kB/sec/disk,
we must back out the factor multiple done by size_kb_arg. This
is already performed by 'lvcreate' for these arguments.
2) Allow all RAID types, not just RAID1, to change these values.
3) Add min|maxrecoveryrate_ARG to the list of 'update_partial_unsafe'
commands so that lvchange will not complain about needing at
least one of a certain set of arguments and failing.
4) Add tests that check that these values can be set via lvchange
and lvcreate and that 'lvs' reports back the proper results.
In those places where mirrors were being created while assuming
a default segment type of "mirror", we include the '--type mirror'
argument to explicitly set the segment type. This will preserve
the mirror testing that is performed even though the default
mirroring segment type is now "raid1".
