IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Since commit f12ee43f2e call destroy,
it start to check all VGs are unlocked. However when we become_daemon,
we simply reset locking (since lock is still kept by parent process).
So implement a simple 'reset' flag.
Accept --ignoreskippedcluster with pvs, vgs, lvs, pvdisplay, vgdisplay,
lvdisplay, vgchange and lvchange to avoid the 'Skipping clustered
VG' errors when requesting information about a clustered VG
without using clustered locking and still exit with success.
The messages can still be seen with -v.
Udev daemon has recently introduced a limit on the number of udev
processes (there was no limit before). This causes a problem
when calling pvscan --cache -aay in lvmetad udev rules which
is supposed to activate the volumes. This activation is itself
synced with udev and so it waits for the activation to complete
before the pvscan finishes. The event processing can't continue
until this pvscan call is finished.
But if we're at the limit with the udev process count, we can't
instatiate any more udev processes, all such events are queued
and so we can't process the lvm activation event for which the
pvscan is waiting.
Then we're in a deadlock since the udev process with the
pvscan --cache -aay call waits for the lvm activation udev
processing to complete, but that will never happen as there's
this limit hit with the number of udev processes.
The process with pvscan --cache -aay actually times out eventually
(3min or 30sec, depends on the version of udev).
This patch makes it possible to run the pvscan --cache -aay
in the background so the udev processing can continue and hence
we can avoid the deadlock mentioned above.
Just to make it more clear and also not to confuse
config_valid with check against config definition
(and its 'valid' flag within the config defintion tree).
When placing the profile in a configuration cascade, this sequence is
used exactly:
CONFIG_STRING -> CONFIG_PROFILE -> CONFIG_FILE/MERGED_FILES
So if the profile is used, it overloads the lvm.conf (and any
existing tag configs). However, if "--config" is used to define
a custom configuration on command line, this overloads even the
profile config!
This patch adds --profile arg to lvm cmds and adds config/profile_dir
configuration setting to select the directory where profiles are stored
By default it's /etc/lvm/profile.
The profiles are added by using new "add_profile" fn and then loaded
using the "load_profile" fn. All profiles are stored in a cmd context
within the new "struct profile_params":
struct profile_params {
const char *dir;
struct profile *global_profile;
struct dm_list profiles_to_load;
struct dm_list profiles;
};
...where "dir" is the directory with profiles, "global_profile" is
the profile that is set globally via the --profile arg (IOW, not
set per VG/LV basis based on metadata record) and the "profiles"
is the list with loaded profiles.
A helper type that helps with identification of the configuration source
which makes handling the configuration cascade a bit easier, mainly
removing and adding configuration trees to cascade dynamically.
Currently, the possible types are:
CONFIG_UNDEFINED - configuration is not defined yet (not initialized)
CONFIG_FILE - one file configuration
CONFIG_MERGED_FILES - configuration that is a result of merging more files into one
CONFIG_STRING - configuration string typed on cmd line directly
CONFIG_PROFILE - profile configuration (the new type of configuration, patches will follow...)
Also, generalize existing "remove_overridden_config_tree" to work with
configuration type identification in a cascade. Before, it was just
the CONFIG_STRING we used. Now, we need some more to add in a
cascade (like the CONFIG_PROFILE). So, we have:
struct dm_config_tree *remove_config_tree_by_source(struct cmd_context *cmd, config_source_t source);
config_source_t config_get_source_type(struct dm_config_tree *cft);
... for removing the tree by its source type from the cascade and
simply getting the source type.
Instead of seeing wierd overflows inside the lvm code,
giving false error messages, kill the user experiment in the begining.
Who needs to use more then 16EiB with lvm2 and 64bit anyway...
Accept --yes on all commands, even ones that don't today have prompts,
so that test scripts that don't care about interactive prompts no
longer need to deal with them.
But continue to mention --yes only in the command prototypes that
actually use it.
For example, the old call and reference:
find_config_tree_str(cmd, "devices/dir", DEFAULT_DEV_DIR)
...now becomes:
find_config_tree_str(cmd, devices_dir_CFG)
So we're referring to the named configuration ID instead
of passing the configuration path and the default value
is taken from central config definition in config_settings.h
automatically.
Rename lvmetad_warning() to lvmetad_connect_or_warn().
Log all connection attempts on the client side, whether successful or not.
Reduce some nesting and remove a redundant assertion.
If udev synchronization is disabled by means of --noudevsync
option, we should disable just the synchronization and nothing else.
The udev fallback (verifying udev operations and fixing the
nodes/symlinks if found incorrect) is orthogonal and controlled
by a separate activation/verify_udev_operations configuration option.
When valgrind usage is desired by user (--enable-valgrind-pool)
skip playing/closing/reopenning with descriptors - it makes
valgridng useless.
Make sleep delay for clvmd start longer.
We should check whether the fd is opened before trying to reopen it.
For example, the stdin is closed in test/lib/harness.c causing the
test suite to fail.
Accept -q as the short form of --quiet.
Suppress non-essential standard output if -q is given twice.
Treat log/silent in lvm.conf as equivalent to -qq.
Review all log_print messages and change some to
log_print_unless_silent.
When silent, the following commands still produce output:
dumpconfig, lvdisplay, lvmdiskscan, lvs, pvck, pvdisplay,
pvs, version, vgcfgrestore -l, vgdisplay, vgs.
[Needs checking.]
Non-essential messages are shifted from log level 4 to log level 5
for syslog and lvm2_log_fn purposes.
Remove the limit for major and minor number arguments used while specifying
persistent numbers via -My --major <major> --minor <minor> option which
was set to 255 before. Follow the kernel limit instead which is 12 bits
for major and 20 bits for minor number (kernel >= 2.6 and LVM formats
that does not have FMT_RESTRICTED_LVIDS - so still keep the old limit
of 255 for lvm1 format).
Add arg support for discard.
Add discard ignore, nopassdown, passdown (=default) support.
Flags could be set per pool.
lvcreate [--discard {ignore|no_passdown|passdown}] vg/thinlv
Define an 'activation_handler' that gets called automatically on
PV appearance/disappearance while processing the lvmetad_pv_found
and lvmetad_pv_gone functions that are supposed to update the
lvmetad state based on PV availability state. For now, the actual
support is for PV appearance only, leaving room for PV disappearance
support as well (which is a more complex problem to solve as this
needs to count with possible device stack).
Add a new activation change mode - CHANGE_AAY exposed as
'--activate ay/-aay' argument ('activate automatically').
Factor out the vgchange activation functionality for use in other
tools (like pvscan...).
We're refererring to 'activation' all over the code and we're talking
about 'LVs being activated' all the time so let's use 'activation/activate'
everywhere for clarity and consistency (still providing the old
'available' keyword as a synonym for backward compatibility with
existing environments).
Never return unfinished toolcontext - since error path is hit on
various stages of initialization we cannot leave it partially uninitialized,
since we would need to spread many more test across the code for config_valid.
Instead return NULL and properly release udev library resources as well.
Read lvm.conf setting for monitoring for each command. So we should not
activate monitoring if the default compilation is set to monitor during
lvconvert commnads.
Patch also removes check for clustered VG and allows to disable monitoring
for clustered VG with the assumption, the problem with monitoring and dmeventd
flag passing for INGNORE is already fixed.
LVM has huge set of options now - it's approaching 60 short-arg less options
and we get interesting case of misdetection for 'merge' option which has been
put into the middle of options with 'short_arg' - thus certainly past 65. (ASCII 'A').
To avoid confusion of short_arg with long_opt number - add '128' to all such
non-short-arg options.
Makes dumpconfig whole-section output wrong in a different way from before,
but we should be able to merge cft_cmdline properly into cmd->cft now and
remove cascade.
We've used udev fallback code till now to check whether udev
created/removed the entries in /dev correctly and if not,
a repair was done (giving a warning messagea about that).
This patch adds a possibility to enable this additional check
and subsequent fallback only when required (debugging purposes
mostly) and trust udev completely.
So let's disable the fallback code by default and add a new
configuration option "activation/udev_fallback".
(The original code for creating the nodes will still be used
in case the device directory that is set in lvm.conf differs
from the one that udev uses and also when activation/udev_rules
is set to 0 - otherwise we would end up with no nodes/symlinks
at all)
allocates these buffers in such way it adds memory page for each such buffer
and size of unlock memory check will mismatch by 1 or 2 pages.
This happens when we print or read lines without '\n' so these buffers are
used. To avoid this extra allocation, use setvbuf to set these bufffers ahead.
Signed-off-by: Zdenek Kabelac <zkabelac@redhat.com>
Reviewed-by: Milan Broz <mbroz@redhat.com>
Reviewed-by: Petr Rockai <prockai@redhat.com>
Also, add a new 'obtain_device_list_from_udev' setting to lvm.conf with which
we can turn this feature on or off if needed.
If set, the cache of block device nodes with all associated symlinks
will be constructed out of the existing udev database content.
This avoids using and opening any inapplicable non-block devices or
subdirectories found in the device directory. This setting is applied
to udev-managed device directory only, other directories will be scanned
fully. LVM2 needs to be compiled with udev support for this setting to
take effect. N.B. Any device node or symlink not managed by udev in
udev directory will be ignored with this setting on.
Allowing an 'all' and 'unmanaged' value is more intuitive, and
provides a simple way for users to get back to original LVM behavior
of metadata written to all PVs in the volume group.
If the user requests "--vgmetadatacopies unmanaged", this instructs
LVM not to manage the ignore bits to achieve a specific number of
metadata copies in the volume group. The user is free to use
"pvchange --metadataignore" to control the mdas on a per-PV basis.
If the user requests "--vgmetadatacopies all", this instructs LVM
to do 2 things: 1) clear all ignore bits, and 2) set the "unmanaged"
policy going forward.
Internally, we use the special MAX_UINT32 value to indicate 'all'.
This 'just' works since it's the largest value possible for the
field and so all 'ignore' bits on all mdas in the VG will get
cleared inside _vg_metadata_balance(). However, after we've
called the _vg_metadata_balance function, we check for the special
'all' value, and if set, we write the "unmanaged" value into the
metadata. As such, the 'all' value is never written to disk.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Now that we have both --pvmetadatacopies and --vgmetadatacopies,
we need to make sure --metadatacopies gets interpreted correctly.
For pv commands, --metadatacopies should imply --pvmetadatacopies,
and for vg commands, --vgmetadatacopies.
Note: this will change the behavior of vgcreate with --metadatacopies
to be a synonym for --vgmetadatacopies. Previously, --metadatacopies
would apply to any PVs given with vgcreate that needed an implicit
pvcreate. As a result, one small change is needed to one of the nightly
tests - t-vgcreate-usage.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
A shortcut for --ignorelockingfailure, --ignoremonitoring, --poll n options
and LVM_SUPPRESS_LOCKING_FAILURE_MESSAGES environment variable used all at
once in initialisation scripts (e.g. rc.sysinit or initrd).
We can use it even in read-only environment where a try to initialise
file-based locking fails (not to mention other processing related with
lvm2 init). Simply, we want to output the version only, nothing else.
And this should always work.
This prevents some confusion when libudev was not found so udev_sync was disabled
automatically. Configure was successful though giving only a tiny warning.
Also, if "dmsetup udevcreatecookie" is used, never return 0x000000 as a result if
udev is not running and keep the output blank.
Allow the number of logical extents to be expressed (for a snapshot) as
a percentage of the total space in the Origin Logical Volume with the
suffix %ORIGIN.
Update the relevant man pages accordingly. Eliminate inconsistencies
between the man pages and tools/commands.h
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
more descriptive message if locking fails instead of
"Locking type -1 initialisation failed."
Use read-only locking instead of misleading ignorelocking option
in message.
DSO is currently not dl_close-ing pluing during it is unregister handling,
so clear structure and related counter, so there are no memory problems.
Futher fixes are needed.
successfully created it must _exit() once it completes.
Update _become_daemon() to differentiate between a failed fork() and a
successful fork().
Added lvm_return_code() to lvmcmdline.[ch]
Going forward, we would like to allow users to specify the total
number of metadatacopies in a VG rather than on a per-PV basis. In
order to facilitate that, introduce --pvmetadatacopes to replace
--metadatacopies everywhere. We still allow --metadatacopies for
pv commands, but require --pvmetadatacopies for vg commands.
Eventually we will introduce --vgmetadatacopies. Once we do that,
we should either deprecate --metadatacopies or make it a synonym based
on the command (pvmetadatacopies for pv commands, and vgmetadatacopies
for vg commands). The latter option would likely just require a simple
'strncpy' check against cmd->command->name to qualify the merge_synonym
call.
Update nightly tests to cover the pvmetadatacopies synonym.
Note that this patch is the result of an eariler review comment for
the implicit pvcreate patches. Should apply cleanly on top of the
implicit pvcreate patches (I applied after patch 10/10 in that series).
NOTE: This patch will require --pvmetadatacopies for vgconvert as
--metadatacopies is no longer accepted.
Very simple / crude method of removing 'is_static' from initialization.
Why should we require an application tell us whether it is linked
statically or dynamically to libLVM? If the application is linked
statically, but libraries exist and dlopen() calls succeed, why
do we care if it's statically linked?
This allows us to remove one argument from create_toolcontext() and
moves it closer to a generic library init function.
In the arg_*() functions, we just use _the_args() directly.
For now we leave the first parameter to these
arg_*() functions (struct cmd_context *) because
of the number of files involved in removing the
parameter.
In preparation for removing cmd->args.
IMO, it makes more sense to put these accessor functions
in the same location as the static array _the_args.
Next patch will update arg_* functions to use _the_args[]
directly and remove cmd->args.
Move init_full_scan_done(0) and init_mirror_in_sync(0) from init_lvm()
after call to create_toolcontext() to _init_globals(), called from bottom
of create_toolcontext(). No functional change.
Author: Dave Wysochanski <dwysocha@redhat.com>
Acked-by: James Cameron <james.cameron@hp.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
init_formats() sets up the command formats, and currently sets cmd->fmt_backup
but does not set cmd->fmt to a default value. This seems incorrect so we
set it to cmd->default_settings.fmt before returning.
The call we remove here may set cmd->fmt based on a command line setting.
But it is safe to remove this, because the only caller of init_lvm() that
cares about the cmdline override is the cmdline tools (clvmd does not care),
called from lvm2_main(). After lvm2_main() calls init_lvm(), it later calls
lvm_run_command(). In lvm_run_command(), we have a call to _apply_settings(),
which has the identical assignment of cmd->fmt that this patch removes.
This is very obvious - _init_logging() makes the identical init_msg_prefix()
and init_cmd_name() calls with cmd->default_settings so these calls are
clearly redundant after calling create_toolcontext().
Very similar argument to removal of init_debug() and other calls.
create_toolcontext() calls _process_config() which sets
cmd->default_settings.activation, then calls
set_activation(cmd->default_settings.activation). Later, create_toolcontext()
sets cmd->current_settings = cmd->default_settings. So these calls
set_activation(cmd->current_settings.activation) are redundant.
Identical argument to previous patch which removed archive_enable() calls.
We add a new parameter to backup_init() which sets the enable value based
on the cmd->default_settings.backup value. This value was used to set
cmd->current_settings.backup, used in the removed backup_enable() call.
_init_backup() calls archive_init(), which originally set 'enabled' to
a hardcoded '1' value. This seems incorrect based on my read of other
areas of the code so here we add a 'enabled' paramter to archive_init().
We pass in cmd->default_settings.archive, which is obtained from the
config tree. Later in create_toolcontext, cmd->current_settings is
set to cmd->default_settings. The archive_enable() call we remove
here was using cmd->current_settings to set the 'archive' enable
value. The final value of cmd->archive_params->enabled should thus
be equivalent to the original code.
This one we actually need to move. _init_logging() is called from
create_toolcontext(), which makes this call:
/* Test mode */
cmd->default_settings.test =
find_config_tree_int(cmd, "global/test", 0);
But it does not call init_test(). So we need an init_test() somewhere.
The most logical place is to put it inside _init_logging(), since this
is where the config value is read and default_settings are set. Placing
the init_test() call here matches what is done with other variables and
seems to make sense.
This variable is set at the top of create_toolcontext() to 0.
Nothing later in create_toolcontext() changes the value.
In init_lvm(), nothing between create_toolcontext() call and this assignment
changes the value. Thus, the assignment is redundant.
The rationale for removing init_verbose() call is very similar to removing
init_debug() call. create_toolcontext() calls _init_logging() which
makes these calls:
/* Verbose level for tty output */
cmd->default_settings.verbose =
find_config_tree_int(cmd, "log/verbose", DEFAULT_VERBOSE);
init_verbose(cmd->default_settings.verbose + VERBOSE_BASE_LEVEL);
And being that create_toolcontext() copies default_settings into
current_settings at the bottom, the init_verbose() call we are removing:
init_verbose(cmd->current_settings.verbose + VERBOSE_BASE_LEVEL);
is redundant.
We can safely remove because create_toolcontext() calls _init_logging(),
which makes these calls:
/* Debug level for log file output */
cmd->default_settings.debug =
find_config_tree_int(cmd, "log/level", DEFAULT_LOGLEVEL);
init_debug(cmd->default_settings.debug);
Then at the bottom of create_toolcontext() we do this:
cmd->current_settings = cmd->default_settings;
So the call we are removing from init_lvm() functions (clvmd and lvmcmdline):
init_debug(cmd->current_settings.debug);
Just sets the value of debug based on 'cmd->current_settings.debug'.
Since cmd->current_settings is equivalent to cmd->default_settings, and
init_debug() was called with cmd->default_settings, the call we remove is
redundant.
Print just one line:
Use `COMMAND --help' for more information.
after "real" diagnostic(s), rather than all of the usage lines.
Otherwise, the 30-40+ lines of --help output could obscure the real diagnostic.
Author: Jim Meyering <jim@meyering.net>
Move yes_no_prompt() into library (display.c, display.h).
Fixup includes as a result of movement of prior two functions.
Fixup force_t enum to be more descriptive.
e.g. lvcreate -l 100%FREE to create an LV using all available space.
lvextend -l 50%LV to increase an LV by 50% of its existing size.
lvcreate -l 20%VG to create an LV using 20% of the total VG size.
event-driven model. Without changes to the way the cache gets updated, the
option is currently unreliable without a global lock to prevent any lvm2
commands from running concurrently.
Add --config for overriding most config file settings from cmdline.
Quote arguments when printing command line.
Remove linefeed from 'initialising logging' message.
Add 'Completed' debug message.
Don't attempt library exit after reloading config files.
Always compile with libdevmapper, even if device-mapper is disabled.
Fix some memory leaks in error paths found by coverity.
Use C99 struct initialisers.
Move DEFS into configure.h.
Clean-ups to remove miscellaneous compiler warnings.
Additional verbosity level -vvvv includes line numbers and backtraces.
Verbose messages now go to stderr not stdout.
Close any stray file descriptors before starting.
Refine partitionable checks for certain device types.
Allow devices/types to override built-ins.