IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
These two flags may be not reset at the end of
the command when the unlock is implicit, which
is a problem if the cmd struct is reused.
Clear the flags in the general fin_locking.
There have been two file locks used to protect lvm
"global state": "ORPHANS" and "GLOBAL".
Commands that used the ORPHAN flock in exclusive mode:
pvcreate, pvremove, vgcreate, vgextend, vgremove,
vgcfgrestore
Commands that used the ORPHAN flock in shared mode:
vgimportclone, pvs, pvscan, pvresize, pvmove,
pvdisplay, pvchange, fullreport
Commands that used the GLOBAL flock in exclusive mode:
pvchange, pvscan, vgimportclone, vgscan
Commands that used the GLOBAL flock in shared mode:
pvscan --cache, pvs
The ORPHAN lock covers the important cases of serializing
the use of orphan PVs. It also partially covers the
reporting of orphan PVs (although not correctly as
explained below.)
The GLOBAL lock doesn't seem to have a clear purpose
(it may have eroded over time.)
Neither lock correctly protects the VG namespace, or
orphan PV properties.
To simplify and correct these issues, the two separate
flocks are combined into the one GLOBAL flock, and this flock
is used from the locking sites that are in place for the
lvmlockd global lock.
The logic behind the lvmlockd (distributed) global lock is
that any command that changes "global state" needs to take
the global lock in ex mode. Global state in lvm is: the list
of VG names, the set of orphan PVs, and any properties of
orphan PVs. Reading this global state can use the global lock
in sh mode to ensure it doesn't change while being reported.
The locking of global state now looks like:
lockd_global()
previously named lockd_gl(), acquires the distributed
global lock through lvmlockd. This is unchanged.
It serializes distributed lvm commands that are changing
global state. This is a no-op when lvmlockd is not in use.
lockf_global()
acquires an flock on a local file. It serializes local lvm
commands that are changing global state.
lock_global()
first calls lockf_global() to acquire the local flock for
global state, and if this succeeds, it calls lockd_global()
to acquire the distributed lock for global state.
Replace instances of lockd_gl() with lock_global(), so that the
existing sites for lvmlockd global state locking are now also
used for local file locking of global state. Remove the previous
file locking calls lock_vol(GLOBAL) and lock_vol(ORPHAN).
The following commands which change global state are now
serialized with the exclusive global flock:
pvchange (of orphan), pvresize (of orphan), pvcreate, pvremove,
vgcreate, vgextend, vgremove, vgreduce, vgrename,
vgcfgrestore, vgimportclone, vgmerge, vgsplit
Commands that use a shared flock to read global state (and will
be serialized against the prior list) are those that use
process_each functions that are based on processing a list of
all VG names, or all PVs. The list of all VGs or all PVs is
global state and the shared lock prevents those lists from
changing while the command is processing them.
The ORPHAN lock previously attempted to produce an accurate
listing of orphan PVs, but it was only acquired at the end of
the command during the fake vg_read of the fake orphan vg.
This is not when orphan PVs were determined; they were
determined by elimination beforehand by processing all real
VGs, and subtracting the PVs in the real VGs from the list
of all PVs that had been identified during the initial scan.
This is fixed by holding the single global lock in shared mode
while processing all VGs to determine the list of orphan PVs.
This reverts 518a8e8cfb
"lvmlockd: activate mirror LVs in shared mode with cmirrord"
because while activating a mirror LV with cmirrord worked,
changes to the active cmirror did not work.
When lvextend extends an LV that is active with a shared
lock, use this as a signal that other hosts may also have
the LV active, with gfs2 mounted, and should have the LV
refreshed to reflect the new size. Use the libdlmcontrol
run api, which uses dlm_controld/corosync to run an
lvchange --refresh command on other cluster nodes.
When an LV is active with a shared lock, a command can be
run to change the LV with --lockopt skiplv (to override the
exclusive lock the command ordinarily requires which is not
compatible with the outstanding shared lock.)
In this case, other commands may have the LV active and may
need to refresh the LV, so print warning stating this.
and "cachepool" to refer to a cache on a cache pool object.
The problem was that the --cachepool option was being used
to refer to both a cache pool object, and to a standard LV
used for caching. This could be somewhat confusing, and it
made it less clear when each kind would be used. By
separating them, it's clear when a cachepool or a cachevol
should be used.
Previously:
- lvm would use the cache pool approach when the user passed
a cache-pool LV to the --cachepool option.
- lvm would use the cache vol approach when the user passed
a standard LV in the --cachepool option.
Now:
- lvm will always use the cache pool approach when the user
uses the --cachepool option.
- lvm will always use the cache vol approach when the user
uses the --cachevol option.
If there are two independent scripts doing:
vgchange --lockstart vg
lvchange -ay vg/lv
The first vgchange to do the lockstart will wait for
the lockstart to complete before returning.
The second vgchange to do the lockstart will see that
the start is already in progress (from the first) and
will do nothing. This means the second does not wait
for any lockstart to complete, and moves on to the
lvchange which may find the lockspace still starting
and fail.
To fix this, make the vgchange lockstart command
wait for any lockstart's in progress to complete.
In few cases error paths from initialization were returned as
'success == 1'.
Also assing num_mb with single compare checking valid sector_size.
For dumb compiler make num_mb always defined.
If a single, standard LV is specified as the cache, use
it directly instead of converting it into a cache-pool
object with two separate LVs (for data and metadata).
With a single LV as the cache, lvm will use blocks at the
beginning for metadata, and the rest for data. Separate
dm linear devices are set up to point at the metadata and
data areas of the LV. These dm devs are given to the
dm-cache target to use.
The single LV cache cannot be resized without recreating it.
If the --poolmetadata option is used to specify an LV for
metadata, then a cache pool will be created (with separate
LVs for data and metadata.)
Usage:
$ lvcreate -n main -L 128M vg /dev/loop0
$ lvcreate -n fast -L 64M vg /dev/loop1
$ lvs -a vg
LV VG Attr LSize Type Devices
main vg -wi-a----- 128.00m linear /dev/loop0(0)
fast vg -wi-a----- 64.00m linear /dev/loop1(0)
$ lvconvert --type cache --cachepool fast vg/main
$ lvs -a vg
LV VG Attr LSize Origin Pool Type Devices
[fast] vg Cwi---C--- 64.00m linear /dev/loop1(0)
main vg Cwi---C--- 128.00m [main_corig] [fast] cache main_corig(0)
[main_corig] vg owi---C--- 128.00m linear /dev/loop0(0)
$ lvchange -ay vg/main
$ dmsetup ls
vg-fast_cdata (253:4)
vg-fast_cmeta (253:5)
vg-main_corig (253:6)
vg-main (253:24)
vg-fast (253:3)
$ dmsetup table
vg-fast_cdata: 0 98304 linear 253:3 32768
vg-fast_cmeta: 0 32768 linear 253:3 0
vg-main_corig: 0 262144 linear 7:0 2048
vg-main: 0 262144 cache 253:5 253:4 253:6 128 2 metadata2 writethrough mq 0
vg-fast: 0 131072 linear 7:1 2048
$ lvchange -an vg/min
$ lvconvert --splitcache vg/main
$ lvs -a vg
LV VG Attr LSize Type Devices
fast vg -wi------- 64.00m linear /dev/loop1(0)
main vg -wi------- 128.00m linear /dev/loop0(0)
The lvmlock LV size was not adjusted correctly for 512 vs 4K
sector sizes which influence the lease size used by sanlock.
When lvmlock was automatically extended, the zeroing through
bcache wasn't working.
This fixes a problem in commit e6bb780d24, in which the
back compat handling for the old locking_type=4 was
incorrectly translated to mean the same thing as --readonly,
which prevented activation because activation uses an
exclusive vg lock. Previously, locking_type=4 allowed
activation.
If we see locking_type 4 in an old config, translate it to
the new combination of --readonly and --sysinit, which we
now define to mean the --readonly behavior with an exception
to allow activation.
Native disk scanning is now both reduced and
async/parallel, which makes it comparable in
performance (and often faster) when compared
to lvm using lvmetad.
Autoactivation now uses local temp files to record
online PVs, and no longer requires lvmetad.
There should be no apparent command-level change
in behavior.
The last commit related to this was incomplete:
"Implement lock-override options without locking type"
This is further reworking and reduction of the locking.[ch]
layer which handled all clustering, but is now only used
for file locking. The "locking types" that this layer
implemented were removed previously, leaving only the
standard file locking. (Some cluster-related artifacts
remain to be cleared out later.)
Command options to override or modify locking behavior
are reimplemented here without using the locking types.
Also, deprecated locking_type values are recognized,
and implemented as if one of the equivalent override
options was set.
Options that override file locking are:
. --nolocking disables all file locking.
. --readonly grants read lock requests without actually
taking a file lock, and refuses write lock requests.
. --ignorelockingfailure tries to set up file locks and
uses them normally if possible. When not possible, it
behaves like --readonly, but allows activation.
. --sysinit is the same as ignorelockingfailure.
. global/metadata_read_only acquires actual read file
locks, and refuses write lock requests.
(Some of these options could probably be deprecated
because they were added as workarounds to various
locking_type behaviors that are now deprecated.)
The locking_type setting now has one valid value: 1 which
refers to standard file locking. Configs that contain
deprecated values are recognized and still work in
largely the same way:
. 0 disabled all locking, now implemented like --nolocking
is set. Allow the nolocking option in all commands.
. 1 is the normal file locking setting and is unchanged.
. 2 was for external locking which was not used, and
reverts to normal file locking.
. 3 was for cluster/clvm. This reverts to normal file
locking, and prints messages about lvmlockd.
. 4 was equivalent to readonly, now implemented like
--readonly is set.
. 5 disabled all locking, now implemented like
--nolocking is set.
The options: --nolocking, --readonly, --sysinit
override, or make exceptions to, the normal file locking
behavior. Implement these by just checking for the
options in the file locking path instead of using
special locking types.
Basic LV functions:
activate_lv(), deactivate_lv(),
suspend_lv(), resume_lv()
were routed through the locking infrastruture on the way to:
lv_activate_with_filter(), lv_deactivate(),
lv_suspend_if_active(), lv_resume_if_active()
This commit removes the locking infrastructure from the
middle and calls the later functions directly from the former.
There were a couple of ancillary steps that the locking
infrastructure added along the way which are still included:
- critical section inc/dec during suspend/resume
- checking for active component LVs during activate
The "activation" file lock (serializing activation) has not
been kept because activation commands have been changed to
take the VG file lock exclusively which makes the activation
lock unused and unnecessary.
Four commands lock two VGs at a time:
- vgsplit and vgmerge already have their own logic to
acquire the locks in the correct order.
- vgimportclone and vgrename disable this ordering check.
Different flavors of activate_lv() and lv_is_active()
which are meaningful in a clustered VG can be eliminated
and replaced with whatever that flavor already falls back
to in a local VG.
e.g. lv_is_active_exclusive_locally() is distinct from
lv_is_active() in a clustered VG, but in a local VG they
are equivalent. So, all instances of the variant are
replaced with the basic local equivalent.
For local VGs, the same behavior remains as before.
For shared VGs, lvmlockd was written with the explicit
requirement of local behavior from these functions
(lvmlockd requires locking_type 1), so the behavior
in shared VGs also remains the same.
In this command, lvcreate creates a new LV and then combines
it with an existing cache pool, producing a cache LV. This
command was previously not allowed in in a shared VG.
It's not an error if a command requests the global lock
when it has already acquired it. It shouldn't happen,
but there could be cases we've not found.
As we start refactoring the code to break dependencies (see doc/refactoring.txt),
I want us to use full paths in the includes (eg, #include "base/data-struct/list.h").
This makes it more obvious when we're breaking abstraction boundaries, eg, including a file in
metadata/ from base/
There are likely more bits of code that can be removed,
e.g. lvm1/pool-specific bits of code that were identified
using FMT flags.
The vgconvert command can likely be reduced further.
The lvm1-specific config settings should probably have
some other fields set for proper deprecation.
Occasionaly users may need to peek into 'component devices.
Normally lvm2 does not let users activation component.
This patch adds special mode where user can activate
component LV in a 'read-only' mode i.e.:
lvchange -ay vg/pool_tdata
All devices can be deactivated with:
lvchange -an vg | vgchange -an....
While 'file-locking' code always dropped cached VG before
lock was taken - other locking types actually missed this.
So while the cache dropping has been implement for i.e. clvmd,
actually running command in cluster keept using cache even
when the lock has been i.e. dropped and taken again.
This rather 'hard-to-hit' error was noticable in some
tests running in cluster where content of PV has been
changed (metadata-balance.sh)
Fix the code by moving cache dropping directly lock_vol() function.
TODO: it's kind of strange we should ever need drop_cached_metadata()
used in several places - this all should happen automatically
this some futher thinking here is likely needed.
In fact pvmove does support 'clustered-core' target for clustered
pvmove of LVs activated on multiple nodes.
This patch restores support for activation of pvmove on all nodes
for LVs that are also activate on all nodes.
Introduce enum dev_io_reason to categorise block device I/O
in debug messages so it's obvious what it is for.
DEV_IO_SIGNATURES /* Scanning device signatures */
DEV_IO_LABEL /* LVM PV disk label */
DEV_IO_MDA_HEADER /* Text format metadata area header */
DEV_IO_MDA_CONTENT /* Text format metadata area content */
DEV_IO_FMT1 /* Original LVM1 metadata format */
DEV_IO_POOL /* Pool metadata format */
DEV_IO_LV /* Content written to an LV */
DEV_IO_LOG /* Logging messages */
There is no need to differentiation between clustered VG and normal VG.
As the activation depends on locking type.
Use unconditionally locally exclusive activation for pvmove.
When activation of LVs fails prior pvmove start, try to deactivate
already activated LVs.
TODO: possibly remember which LVs where already activate and only those
take down - devices which are already in-use will stay active.
Activation lock has a primary purpose to serialize locking of individual
LV in case there is no other protecting mechanism for parallel
execution.
However in the case an activated LV is composed from several other LVs,
noone should be able to manipulate with those LVs as well.
This patch add a very 'naive' global VG activation locking in this case.
In the future we may introduce smarter function detecting minimal closed
graph components if this will appear as bottleneck
Patch checks if the VG Write lock is held - in this case we do not
need any more locking - command has exclusive access to VG.
In case we have clustered VG and we are activating an LV which does not
need other LVs - we also do not need any more locks.
In all other cases take respective lock - for single LV - use lvid,
for complex LVs use vgname.
In a shared VG, lvconvert must be used to create thin pools
and cache pools, not the lvcreate variants of those commands.
Deny these cases early in lvcreate using the new command defs.
Denying these cases deeper in the code was missing some
cleanup of the partially completed command.
Revert the lvmlockd.c changes from:
commit 0bf836aa14
"tidy: prefer not using else after return"
The commit introduced at least one regression, which broke
lvcreate of a thin pool in a shared VG.
After the internal lvmlock LV (holding sanlock leases) is
extended to hold more leases, it needs to be zeroed.
sanlock expects to see either zeroed blocks or blocks
initialized with leases.
Some lvconvert commands can be used directly on the data sublv:
lvconvert ... vg/pool_tdata
The correct LV lock to use in lvmlockd is the one on the pool LV.
If the VG holding the global lock is removed, we can indicate
that as the reason for not being able to acquire the global
lock in subsequent error messages, and can suggest enabling
the global lock in another VG. (This helpful error message
will go away if the global lock is enabled in another VG,
or if lvmlockd is restarted.)
Previously, a command sent lvmetad new VG metadata in vg_commit().
In vg_commit(), devices are suspended, so any memory allocation
done by the command while sending to lvmetad, or by lvmetad while
updating its cache could deadlock if memory reclaim was triggered.
Now lvmetad is updated in unlock_vg(), after devices are resumed.
The new method for updating VG metadata in lvmetad is in two phases:
1. In vg_write(), before devices are suspended, the command sends
lvmetad a short message ("set_vg_info") telling it what the new
VG seqno will be. lvmetad sees that the seqno is newer than
the seqno of its cached VG, so it sets the INVALID flag for the
cached VG. If sending the message to lvmetad fails, the command
fails before the metadata is committed and the change is not made.
If sending the message succeeds, vg_commit() is called.
2. In unlock_vg(), after devices are resumed, the command sends
lvmetad the standard vg_update message with the new metadata.
lvmetad sees that the seqno in the new metadata matches the
seqno it saved from set_vg_info, and knows it has the latest
copy, so it clears the INVALID flag for the cached VG.
If a command fails between 1 and 2 (after committing the VG on disk,
but before sending lvmetad the new metadata), the cached VG retains
the INVALID flag in lvmetad. A subsequent command will read the
cached VG from lvmetad, see the INVALID flag, ignore the cached
copy, read the VG from disk instead, update the lvmetad copy
with the latest copy from disk, (this clears the INVALID flag
in lvmetad), and use the correct VG metadata for the command.
(This INVALID mechanism already existed for use by lvmlockd.)
This reverts commit fa69ed0bc8.
This code sometimes expects to be presented with a read-only filesystem
(during some boot sequences for example) and copes appropriately with
this and it should not lead to expected error messages that might cause
unnecessary alarm.
lv_name arg is only used without known LV for resolving '*lv'.
Once we know *lv, never use lv_name ever again.
So setting it when passing *lv has not needed.
Use common API design and pass just LV pointer to lv_manip.c functions.
Read cmd struct via lv->vg->cmd when needed.
Also do not try to return EINVALID_CMD_LINE error when we
have already openned VG - this error code can only be returned before
locking VG.
If 'vgcreate --shared' finds both sanlock and dlm are running,
print a more accurate error message:
"Found multiple lock managers, select one with --lock-type."
When neither is running, we still print:
"Failed to detect a running lock manager to select lock type."
vgchange --lock-type iterates through LVs to ensure
no LVs are active before changing the lock type of
the VG, but the loop was not checking that an LV
actually has a lock before trying it, so it would
fail if the VG had any LVs that don't use locks,
e.g it would fail on a tmeta LV from a pool.
