IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When activation of LVs fails prior pvmove start, try to deactivate
already activated LVs.
TODO: possibly remember which LVs where already activate and only those
take down - devices which are already in-use will stay active.
Only lv_committed() now uses vg->vg_committed and it appears redundant
if its contents match the enclosing VG so don't waste cycles creating it
when that's known to be true when no write lock is held so the struct
won't get modified.
The persistent filter should not be imported by any command that doesn't
use it so take addtional note of REQUIRES_FULL_LABEL_SCAN (for vgrename)
and introduce IGNORE_PERSISTENT_FILTER for vgscan and pvscan.
In HA cluster, we have "clvm" resource agent to manage clvmd daemon.
The agent invokes clvmd like: "clvmd -T90 -d0", which always prints
a scaring error message:
"""
local socket: connect failed: No such file or directory
"""
When specifed with "-d" option, clvmd tries to check if an instance
of the clvmd daemon is already running through a testing connection.
The connect() will fail with this ENOENT error in such case, so supress
the error message in such case.
TODO: add missing error reaction code - since ofter log_error, program
is not supposed to continue running (log_error() is for reporting
stopping problems).
Signed-off-by: Eric Ren <zren@suse.com>
Check and prevent starting another snapshot merge before
exiting merging is finished.
TODO: we can possibly implement smarter logic to drop existing
merging and start a new one.
We always preferred and recommended socket activation for our services
so remove the Install section in related .service units which are unused
in this case and keep only the Install section in associated .socket
units.
Signed-off-by: Bastian Blank <waldi@debian.org>
Since 4fa5add6b1 ("pvcreate: Wipe cached
bootloaderarea when wiping label.") label_remove is responsible
for the lvmcache_del. (toollib and liblvm need fixing to share
the code.)
Correct reported message when thin snapshot has been already merged.
So lvm2 is no longer reporting "Mergins of snapshot X will occur..."
(even with swapped names).
When an ignored metadata area gets flagged for use again, make sure the
code doesn't try to parse its old metadata. Firstly by trying to detect
this situation and skipping the read (while still remembering the
position reached in the circular buffer), and secondly by clearing the
invalid live metadata location on disk as a precaution when subsequently
writing out the precommitted metadata.
Problems showed up when a metadata area in one VG got moved to
another VG in ignored state (still holding metadata for the original
VG) and then later got brought into use in the new VG - only the header
should be read in this case, not any of the metadata content.
vgsplit shares the vg_rename code so that must only set the PV_MOVED_VG
flag introduced in commit 486ed10848
("vgmerge: Fix intermediate metadata corruption") on PVs that moved.
Last patch missed to mention, we've improved/fixed generated paths
in units and init.d shell scripts when lvm2 was plainly configured
with just i.e. --prefix.
Note: some distros might have fully specified --sbindir and
--usrsbindir - thus those very not seeing problems in generated paths.
Do not allow to take snapshot of mirror/raid leg or log or metadata LV.
This was actually never supported, but user was able to create it,
and this put device stack in hardly fixable state (needs manual work).
This prevents such creation to pass.
Also improve validation when recreating snapshot volume type
from origin and COW volume.
Correction to function for extracting vgname out of lvconvert
parameters.
Avoid repeating some checks.
Add code to handle generic options which may provide vgname in its argument
and compare them all so they match to a single vgname (otherwise it's a
error).
Extract default (envvar) vgname only when no position nor optional vgname is
found.
Fixing regression instroduce with patchset started with commit:
1e2420bca8 (2.02.169)
lvcreate supports a 'conversion' when caching LV.
This normally worked fine, however in case passed LV was
thin-pool's data LV with suffix _tdata we have failed to early.
As the easiest fix looks dropping validation of name when
caching type is select - such name check will happen later
once the VG is opened again and properly detect if the LV
with protected name already exists and can be converted,
or will be rejected as ambigiuous operation requiring user
to specify --type cache | --type cache-pool.
Replaced the confusing device error message "not found (or ignored by
filtering)" by either "not found" or "excluded by a filter".
(Later we should be able to say which filter.)
Left the the liblvm code paths alone.
Activation lock has a primary purpose to serialize locking of individual
LV in case there is no other protecting mechanism for parallel
execution.
However in the case an activated LV is composed from several other LVs,
noone should be able to manipulate with those LVs as well.
This patch add a very 'naive' global VG activation locking in this case.
In the future we may introduce smarter function detecting minimal closed
graph components if this will appear as bottleneck
Patch checks if the VG Write lock is held - in this case we do not
need any more locking - command has exclusive access to VG.
In case we have clustered VG and we are activating an LV which does not
need other LVs - we also do not need any more locks.
In all other cases take respective lock - for single LV - use lvid,
for complex LVs use vgname.
vgmerge suffers from a similar problem to the one fixed in commit
8146548d25 ("vgsplit: Fix intermediate
metadata corruption.")
When merging, splitting or renaming VGs, use a new PV status flag
PV_MOVED_VG to mark the PVs that hold metadata with the old VG name and
use this to provide PV-level granularity instead of incorrectly assuming
all PVs in the VG are the same.
Changing the VG of a PV uses the same on-disk mechanism as vgrename.
This relies on recognising both the old and new VG names. Prior to this
patch the vgsplit code incorrectly provided the new VG name twice
instead of the old and new ones. This lead the low-level mechanism not
to recognise the device as already belonging to a VG and so paying no
attention to the location of its existing metadata, sometimes partly
overwriting it and then later trying to read the corrupt metadata and
issuing a checksum error.
In a shared VG, only allow pvmove with a named LV,
so that only PE's used by the LV will be moved.
The LV is then activated exclusively, ensuring that
the PE's being moved are not used from another host.
Previously, pvmove was mistakenly allowed on a full PV.
This won't work when LVs using that PV are active on
other hosts.
Enable handling of --poolmetadataspare so if user can prevent
creation of _pmspare volume during --repair operation (just
like during actual lvcreate or lvconvert) for pool volumes.
When file-locking mode failed on locking, such description was leaked
(typically not an issue since command usually exists afterwards).
So shirt close() at the end of function and use it in all error paths.
Also make sure, when interrrupt is detected, it's really not holding
lock and returns 0.
Fix code checking that the 2nd mda which is at the end of disk really
fits the available free space and avoid any DA and MDA interleaving when
we already have DA preallocated. This mainly applies when we're restoring
a PV from VG backup using pvcreate --restorefile where we may already have
some DA preallocated - this means the PV was in a VG before with already
allocated space from it (the LVs were created). Hence we need to avoid
stepping into DA - the MDA can never ever be inside in such case!
The code responsible for this calculation was already in
_text_pv_add_metadata_area fn, but it had a bug in the calculation where
we subtracted one more sector by mistake and then the code could still
incorrectly allocate the MDA inside existing DA. The patch also renames
the variable in the code so it doesn't confuse us in future.
Also, if the 2nd mda doesn't fit, don't silently continue with just 1
MDA (at the start of the disk). If 2nd mda was requested and we can't
create that due to unavailable space, error out correctly (the patch
also adds a test to shell/pvcreate-operation.sh for this case).
If the PV was originally created with a larger-than-default
metadata area the restored one wasn't and might not even be
large enough to hold the metadata!
Previously the cache remembered an existing bootloaderarea and
reinstated it (without even checking for overlap) when asked to
write out the PV. pvcreate could write out an incorrect layout.
Avoid adding -g more then once for debug builds.
Avoid enabling DEBUG_MEM when we build multithreaded tools.
Link executables with -fPIE -pie and --export-dynamic LDFLAGS
Introduce PROGS_FLAGS to add option to pass flags for external libs.
Link lvm2 internally library only when really used.
Link DAEMON_LIBS with daemons.
Pass VALGRIND_CFLAGS internally
Set shell failure mode on couple places.
lvm2 warned about zeroing and too big chunksize (>=512KiB), but
only during lvconvert, so lvcreate was creating thin-pools
without any warning about possible slowness of thin provisioning
because of zeroing.
Since _deactivate_and_remove_lvs() is used in more then one place,
move the needed udev synchronization into this function so other
users automatically get correct fs state before next dm manipulation.
Assumption here is that this udev synchronization 'delay' may also
prevent to 'early' table reloads which might cause kernel problems
for md-core - but we may need more generic time-limited reload
frequency for raid devices.
Note: on udev-less system there will be almost no delay.
Since we are reading size as (double) we can get way bigger
number then just plain int64. So to make this check actually
more valid and usable do a maxsize compare in 'double'.
Initialize mutex upfront any debugging and fix this report:
Mutex reinitialization: mutex 0x485d20, recursion count 0, owner 1.
at 0x4C38480: pthread_mutex_init_intercept (drd_pthread_intercepts.c:821)
by 0x4C38480: pthread_mutex_init (drd_pthread_intercepts.c:830)
by 0x11F359: main (clvmd.c:562)
mutex 0x485d20 was first observed at:
at 0x4C38F63: pthread_mutex_lock_intercept (drd_pthread_intercepts.c:885)
by 0x4C38F63: pthread_mutex_lock (drd_pthread_intercepts.c:898)
by 0x11E920: debuglog (clvmd.c:254)
by 0x11F1D8: main (clvmd.c:527)
Switch from warn to log_error since this generated
failing return code for command so printing log_error()
is mandatory.
Happens with i.e. pvscan --cache meets crashing lvmetad.
Centralise editing of the client list into _add_client() and
_del_client(). Introduce _local_client_count to track the size of the
list for debugging purposes. Simplify and standardise the various ways
the list gets walked.
While processing one element of the list in main_loop(),
cleanup_zombie() may be called and remove a different element, so make
sure main_loop() refreshes its list state on return. Prior to this
patch, the list edits for clients disappearing could race against the
list edits for new clients connecting and corrupt the list and cause a
variety of segfaults.
An easy way to trigger such failures was by repeatedly running shell
commands such as:
lvs &; lvs &; lvs &;...;killall -9 lvs; lvs &; lvs &;...
Situations that occasionally lead to the failures can be spotted by
looking for 'EOF' with 'inprogress=1' in the clvmd debug logs.
lvm_run needs to place NULL as the last element into argv[].
Otherwise we get:
Conditional jump or move depends on uninitialised value(s)
_command_required_pos_matches (lvmcmdline.c:1443)
_find_command (lvmcmdline.c:1610)
lvm_run_command (lvmcmdline.c:2770)
lvm2_run (lvmcmdlib.c:91)
When raid leg rimage device is marked as 'D'ead by mdcore,
lvm2 was not able to replace such device with allocate policy,
as device has not appared as missing.
Add detection of transiently failing devices.
Basically reverting commit 58a9f88b8c.
We can use origin_only in case we are snapshot's origin,
as we do support this stack.
So when we are 'uncaching' origin+snaps - we do need to reload only
origin and we do not need to play with snaps.
'lvdisplay -m' tried to go through NULL policy settings,
when such policy was not defined for CachedLV.
Patch is fixing display of cache-pool without defined settings,
as this is now a valid pool and we mostly want users to define
these settings when actually really caching a LV.
Since cache LV can be a stacked device, there is no real reason
trying to use slight optimised tree for origin_only cache reload
(it could be even wrongly implemented in this case).
We can easily go with stardard tree load here.
When user runs command like 'lvconvert --splitcache' the operation
might be actually either slow or not making any progress in kernel,
so lets give user a chance to abort such operation.
When user press 'Ctrl+C' device table is restored to pre-flushing state.
Enhance reporting code, so it does not need to do 'extra' ioctl to
get 'status' of normal raid and provide percentage directly.
When we have 'merging' snapshot into raid origin, we still need to get
this secondary number with extra status call - however, since 'raid'
is always a single segment LV - we may skip 'copy_percent' call as
we directly know the percent and also with better precision.
NOTE: for mirror we still base reported number on the percetage of
transferred extents which might get quite imprecisse if big size
of extent is used while volume itself is smaller as reporting jump
steps are much bigger the actual reported number provides.
2nd.NOTE: raid lvs line report already requires quite a few extra status
calls for the same device - but fix will be need slight code improval.
Previously, we were treating non-RAID to RAID up-converts as a "resync"
operation. (The most common example being 'linear -> RAID1'.) RAID to
RAID up-converts or rebuilds of specific RAID images are properly treated
as a "recover" operation.
Since we were treating some up-convert operations as "resync", it was
possible to have scenarios where data corruption or data loss were
possibilities if the RAID hadn't been able to sync completely before a
loss of the primary source devices. In order to ensure that the user took
the proper precautions in such scenarios, we required a '--force' option
to be present. Unfortuneately, the force option was rendered useless
because there was no way to distiguish the failure state of a potentially
destructive repair from a nominal one - making the '--force' option a
requirement for any RAID1 repair!
We now treat non-RAID to RAID up-converts properly as "recover" operations.
This eliminates the scenarios that can potentially cause data loss or
data corruption; and this eliminates the need for the '--force' requirement.
This patch removes the requirement to specify '--force' for RAID repairs.
Two of the sync actions performed by the kernel (aka MD runtime) are
"resync" and "recover". The "resync" refers to when an entirely new array
is going through the process of initializing (or resynchronizing after an
unexpected shutdown). The "recover" is the process of initializing a new
member device to the array. So, a brand new array with all new devices
will undergo "resync". An array with replaced or added sub-LVs will undergo
"recover".
These two states are treated very differently when failures happen. If any
device is lost or replaced while "resync", there are no worries. This is
because any writes created from the inception of the array have occurred to
all the devices and can be safely recovered. Even though non-initialized
portions will still be resync'ed with uninitialized data, it is ok. However,
if a pre-existing device is lost (aka, the original linear device in a
linear -> raid1 convert) during a "recover", data loss can be the result.
Thus, writes are errored by the kernel and recovery is halted. The failed
device must be restored or removed. This is the correct behavior.
Unfortunately, we were treating an up-convert from linear as a "resync"
when we should have been treating it as a "recover". This patch
removes the special case for linear upconvert. It allows each new image
sub-LV to be marked with a rebuild flag and treats the array as 'in-sync'.
This has the correct effect of causing the upconvert to be treated as a
"recover" rather than a "resync". There is no need to flag these two states
differently in LVM metadata, because they are already considered differently
by the kernel RAID metadata. (Any activation/deactivation will properly
resume the "recover" process and not a "resync" process.)
We make this behavior change based on the presense of dm-raid target
version 1.9.0+.
Code path missed validation of lvcreate --cachepool argument.
If the non cache-pool LV was passed in, code has still continued
further work and failed later on internal error. Validate this
condition at right place now.
When a combination of thin-pool chunk size and thin-pool data size
goes beyond addressable limit, such volume creation is directly
prohibited.
Maximum usable thin-pool size is calculated with use of maximal support
metadata size (even when it's created smaller) and given chunk-size.
If the value data size is found to be too big, the command reports
error and operation fails.
Previously thin-pool was created however lots of thin-pool data LV was
not usable and this space in VG has been wasted.
Warn about a PV that has the in-use flag set, but appears in
the orphan VG (no VG was found referencing it.)
There are a number of conditions that could lead to this:
. The PV was created with no mdas and is used in a VG with
other PVs (with metadata) that have not yet appeared on
the system. So, no VG metadata is found by lvm which
references the in-use PV with no mdas.
. vgremove could have failed after clearing mdas but
before clearing the in-use flag. In this case, the
in-use flag needs to be manually cleared on the PV.
. The PV may have damanged/unrecognized VG metadata
that lvm could not read.
. The PV may have no mdas, and the PVs with the metadata
may have damaged/unrecognized metadata.
A PV holding VG metadata that lvm can't understand
(e.g. damaged, checksum error, unrecognized flag)
will appear as an in-use orphan, and will be cleared
by this repair code. Disable this repair until the
code can keep track of these problematic PVs, and
distinguish them from actual in-use orphans.
Switch METADATA_FORMAT flag usage to be stored via segtype
instead of 'status' flag which appeared to cause major
incompatibility troubles.
For backward compatiblity segtype flags are still accepted also
via 'status' bits which were used from version 2.02.169 so metadata
saved by this newer lvm2 version should still work nicely, although
new save version will no longer work on this older lvm2 version.
Allow storing LV status bits with segment type name field.
Switching to this since this field has better support for compatibility
with older version of lvm2 - since such unknown segtype will not cause
complete invisiblity of metadata from older lvm2 code - just the
particular LV will become unusable with unknown type of segment.
When 'fsadm' was running without terminal (i.e. pipe), it's been
automatically working like in '--yes'.
Detect terminal and only accept empty "" input in this mode.
Add more validation to catch mainly renamed devices, where
filesystem utils are not able to handle devices properly,
as they are not addressed by major:minor by rather via some
symbolic path names which can change over time via rename operation.
Offer possible interim LV types and display their aliases
(e.g. raid5 and raid5_ls) for all conversions between
striped and any raid LVs in case user requests a type
not suitable to direct conversion.
E.g. running "lvconvert --type raid5 LV" on a striped
LV will replace raid5 aka raid5_ls (rotating parity)
with raid5_n (dedicated parity on last image).
User is asked to repeat the lvconvert command to get to the
requested LV type (raid5 aka raid5_ls in this example)
when such replacement occurs.
Resolves: rhbz1439403
Add an exception to not allowing lvchange to change properties
on hidden LVs. When a thin pool data LV is a cache LV, we
need to allow changing cache properties on the tdata sublv of
the thin pool.
Trap cases where the percentage calculation currently leads to an empty
LV and the message:
Internal error: Unable to create new logical volume with no extents
Additionally convert the calculated number of extents from physical to
logical when creating a mirror using a percentage that is based on
Physical Extents. Otherwise a command like 'lvcreate -m3 -l80%FREE'
can never leave any free space.
This brings the behaviour closer to that of lvresize.
(A further patch is needed to cover all the raid types.)
_check_reappeared_pv() incorrectly clears the MISSING_PV flags of
PVs with unknown devices.
While one caller avoids passing such PVs into the function, the other
doesn't. Move the check inside the function so it's not forgotten.
Without this patch, if the normal VG reading code tries to repair
inconsistent metadata while there is an unknown PV, it incorrectly
considers the missing PVs no longer to be missing and produces
incorrect 'pvs' output omitting the missing PV, for example.
Easy reproducer:
Create a VG with 3 PVs pv1, pv2, pv3.
Hide pv2.
Run vgreduce --removemissing.
Reinstate the hidden PV pv2 and at the same time hide a different PV
pv3.
Run 'pvs' - incorrect output.
Run 'pvs' again - correct output.
See https://bugzilla.redhat.com/1434054
Using any arg with a command name in a script file
would cause the command to fail.
The name of the script file being executed was being passed
to lvm_register_commands() and define_commands(), which
prevented command defs from being defined (simple commands
were still being defined only by name which was enough for those
to still work when run trivially with no args).
Unless a change of the regionsize is requested via "lvconvert -R N ...",
keep the region size when the number of images changes in a raid1 LV.
Related: rhbz1443705
Unless a change of the regionsize is requested via "lvconvert -R N ...",
keep the region size when the number of images changes in a raid1 LV.
Resolves: rhbz1443705
When metadata LV size was over DM_THIN_MAX_METADATA_SIZE sectors,
the info() routine was incorrectly trying to match bigger size,
while we do never pass any bigger device.
Fixing a case, where lvs should be displaying status for metadata
LV with 16GB size.
We have to unset the LoadState variable from previous use when we check
for systemd unit state. We use this variable to check if systemd services
are loaded or not and if it is loaded, we issue systemctl commands to
enable/disable and start/stop the service. We don't issue these commands
if the unit is not loaded to avoid error messages which may confuse users.
Removing some unused new lines and changing some incorrect "can't
release until this is fixed" comments. Rename license.txt to make
it clear its merely an included file, not itself a licence.
Better support for lvdisplay.
By default info about running (in kernel) cache status is printed.
To get 'segtype' info, user runs: 'lvdisplay -m', example:
--- Logical volume ---
LV Path /dev/vg/lvol0
LV Name lvol0
VG Name vg
LV UUID Y4uWuN-TBGk-duer-aPWl-yBWn-iFFR-RU1gg1
LV Write Access read/write
LV Creation host, time linux, 2017-03-01 20:52:39 +0100
LV Cache pool name lvol2
LV Cache origin name lvol0_corig
LV Status available
# open 0
LV Size 12,00 MiB
Cache used blocks 10,42%
Cache metadata blocks 0,49%
Cache dirty blocks 0,00%
Cache read hits/misses 112 / 34
Cache wrt hits/misses 133 / 0
Cache demotions 0
Cache promotions 20
Current LE 3
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:0
--- Segments ---
Logical extents 0 to 2:
Type cache
Chunk size 64,00 KiB
Metadata format 1
Mode writethrough
Policy smq
Setting migration_threshold=100000
Cache pool read/writes metadata_format within its segment type..
For CachePoolLV unselected metadata format is NOT stored in metadata.
For CacheLV when metadata format is not present/selected in lvm2 metadata,
it's automatically assumed to be the version 1 (backward compatible).
To ensure older lvm2 will not 'miss-read' metadata with new version 2,
such LV is marked with METADATA_FORMAT status flag (segment is
specifying metadata format). So when cache uses metadata format 2,
it will become inaccesible on older system without such support.
(kernel dm cache < 1.10, lvm2 < 2.02.169).
Add new profilable configation setting to let user select
which metadata format of a created cache pool he wish to use.
By default the 'best' available format is autodetected at runtime,
but user may enforce format 1 or 2 ATM.
Code also detects availability for metadata2 supporting cache target.
In case of troubles user may easily Disable usage of this feature
by placing 'metadata2' into global/cache_disabled_features list.
Reuse same code for getting/setting cache parameters with lvcreate.
So there is single one place how to get vars from profiles and configs.
Variables declarations are moved to start of function and
there is no need to initialize them as they are always
defined by functions get_cache_params() and get_pool_params().
Since cache chunk might be huge and there is no technical need
to enforce rounding and there is actually more 'real' VG space
used then necessary - keep rounding on 'chunk' bounrary only
for thin volumes - where it's the space used anyway.
NB: we support conversion of any-size 'existing' LV into cached LV.
Fix missing reset of '*settings' pointer when no args were given.
Handle cache_chunk settings like all other settings, so it is properly
updated only with non-zero settings and the existing cache-pool
chunk_size is not being reconfigured.
User can specify metadata profile which stores important cache
geometry data for easy configuration.
Fix missing support for getting chunk_size, cache_mode, cache_policy
for a cache/cache pools volumes from configuration or metadata profile.
The fedorahosted git repository shuts down tomorrow:
https://communityblog.fedoraproject.org/fedorahosted-sunset-2017-02-28/
Our upstream git repository has moved back to sourceware.org.
Mailing list hosting is not changing.
Gitweb:
https://www.sourceware.org/git/?p=lvm2
Git:
git://sourceware.org/git/lvm2.git
ssh://sourceware.org/git/lvm2.git
http://sourceware.org/git/lvm2.git
Example command to change the origin of a repository clone:
Public:
git remote set-url origin git://sourceware.org/git/lvm2.git
Committers:
git remote set-url origin git+ssh://sourceware.org/git/lvm2.git
The MD kernel raid1 personality does no use any writemostly leg as the primary.
In case a previous linear LV holding data gets upconverted to
raid1 it becomes the primary leg of the new raid1 LV and a full
resynchronization is started to update the new legs.
No writemostly and/or writebehind setting may be allowed during
this initial, full synchronization period of this new raid1 LV
(using the lvchange(8) command), because that would change the
primary (i.e the previous linear LV) thus causing data loss.
lvchange has a bug not preventing this scenario.
Fix rejects setting writemostly and/or writebehind on resychronizing raid1 LVs.
Once we have status in the lvm2 metadata about the linear -> raid upconversion,
we may relax this constraint for other types of resynchronization
(e.g. for user requested "lvchange --resync ").
New lvchange-raid1-writemostly.sh test is added to the test suite.
Resolves: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=855895
Previously when lvremove tried to remove 'active' origin,
it had been asking for every 'snapshot' LV separately
and doing individual single snapshot removals first.
To be faster it now deactivates origin before removal
all connected snapshots.
This avoids multiple reloads of dm table for origin volume
which were unnecessary as origin was meant to be removed as well.
Some archs can use even 64K pages and then lvm2 runs into trouble if
the stack is 'too small' to fit extra page capturing stack overwrite.
So when lvm2 limits stack - add extra mem page - be it 4K or 64K.
Relates to ppc64le bug: https://bugzilla.redhat.com/1387279
Add:
- conversion support from striped/raid0/raid0_meta to/from raid10;
raid10 goes by the near format (same as used in creation of
raid10 LVs), which groups data copies together with their original
blocks (e.g. 3-way striped, 2 data copies resulting in 112233 in the
first stripe followed by 445566 in the second etc.) and is limited
to even numbers of legs for now
- related tests to lvconvert-raid-takeover.sh
- typo
Related: rhbz1366296
- support shrinking of raid0/1/4/5/6/10 LVs
- enhance lvresize-raid.sh tests: add raid0* and raid10
- fix have_raid4 in aux.sh to allow lv_resize-raid.sh
and other scripts to test raid4
Resolves: rhbz1394048
Add:
- support to change region size of existing RaidLVs
(all RAID LV types but raid0/raid0_meta)
- lvconvert-raid-regionsize.sh with test variations
for different RAID types and region sizes
Resolves: rhbz1392947