IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Before removing thin pool LV always make sure, stacked message
for previous run are cleared - but allow to remove any
device that should have been created
(i.e. creation of snapshot failed - so the message for snapshot creation
may be replaced with delete message within unfinished transaction).
Also commit messages after lv remove - so free space is released in pool.
Extend the usage of origin_only flag to allow resume of thin pool LV
(when it's active) to pass only the messages.
origin_only flag will skip detection of already resumed tree for thin_pool,
so we do not need to suspend the tree and we just send messages.
Pass in the origin_only flag also for thin volumes - but curently the flag
is not used to its best.
FIXME: achieve the state where only thin volume snapshot origin is
suspended without its childrens - let's explore whether this may
happen automatically inside libdm (might be generic for other targets).
So the code would not need to annotate the node for this.
Extend lv_activate_opts with bool flag to know for which purpose
dtree is created - and add message only for activation tree
(since that's the only place that may send them).
Extend validation check for thin snapshot creation and test whether
active snapshot origin is suspended before its snapshot is created
(useful in recover scenarios) - in this case also detect, whether
transaction has been already completed and avoid such suspend check
failure in that case.
Add pool_has_message and use it in attach_pool_message.
Also update header to make more obvious which segment type is
expected as parameter.
Rename 'read_only' to 'no_update' (no auto update transaction_id)
to better fit how it's used.
Fix problem when there was only one stacked message replaced with delete
message that caused unwanted transaction_id increase.
Failure to do so results in "Performing unsafe table load while X device(s) are
known to be suspended" errors. While fixing the problem in this way works and
is consistent with the way the mirror segment type does it, it would be nice
to find a solution that uses the generic suspend/resume calls.
Also included in this check-in are additions to the test suite that perform
conversions on RAID LVs under a snapshot. These tests are disabled for the
time being due to a kernel bug that is yet to be tracked down.
Similar to the "mirror" segment type's log device, _add_dev_to_dtree should
be called and not _add_lv_to_dtree when adding metadata sub-LVs to the deptree.
Since _add_lv_to_dtree was being called, 'origin_only' could be set if a
snapshot sits on top of the RAID device. This would cause the actual device
that needed to be added to be skipped in favor of the non-existant device,
"<foo>-real".
Reformat name and path how the LV is represented with lvm1 compatible option,
to switch to the old way - which had number of problem - i.e. many links
do not exist - since for private devices we are not creating them.
Add more info about thin pools and volumes.
Since striped name function knows when to report 'linear' instead of
'stripe' type name - drop it from this place.
This fixes problem when reporting segtype e.g. for thin-pool which
is also using area_count=1 to store thin data device reference.
It also returns properly strduped memory instead of badly casted const char*.
This patch to the suspend code - like the similar change for resume -
queries the lock mode of a cluster volume and records whether it is active
exclusively. This is necessary for suspend due to the possibility of
preloading targets. Failure to check to exclusivity causes the cluster target
of an exclusively activated mirror to be used when converting - rather than
the single machine target.
Since snapshot needs to suspend origin - it might lead to pool userspace
deadlock (as the pool will wait for new space in case it would be overfilled,
but dmeventd would not be able to resize it, as the lvcreate operation would
have kept the VG lock.)
To minimize the risk of such scenario - we prevent to create new snapshot
in case we are over the threshold - but beware, there is still small timewindow,
so keep threshold at some reasonable level!
New field Data% is able to display info about
thin_pool, thin, snapshot and has generic meaning here.
Simple Time/Host field are here to display host and time creation.
Basic support to keep info when the LV was created.
Host and time is stored into LV mda section.
FIXME: Current version doesn't support configurable string via lvm.conf
and used fixed version strftime "%Y-%m-%d %T %z".
This value returns percentage of 'mapped' size compared with total LV size.
(Without passed seg pointer it return highest mapped size - but it's
not used yet.)
LVM- prefix.
Try harder not to leave stray empty devices around (locally or remotely) when
reverting changes after failures while there are inactive tables.
Since the !(dev->flags & DEV_REGULAR) code path just called
dev_name_confirmed() which has just called 'stat()' inside,
remove duplicate second stat() call here.
When both path have identical prefix i.e. /dev/disk/by-id
skip 2 x lstat() for /dev /dev/disk /dev/disk/by-id
and directly lstat() only different part of the path.
Reduces amount of lstat calls on system with lots of devices.
The RAID plug-in for dmeventd now calls 'lvconvert --repair' to address failures
of devices in a RAID logical volume. The action taken can be either to "warn"
or "allocate" a new device from any spares that may be available in the
volume group. The action is designated by setting 'raid_fault_policy' in
lvm.conf - the default being "warn".
Also, don't allow a splitmirror operation on a RAID LV that is already tracking
a split, unless the operation is to stop the tracking and complete the split.
Example:
~> lvconvert --splitmirrors 1 --trackchanges vg/lv /dev/sdc1
# Now tracking changes - image can be merged back or split-off for good
~> lvconvert --splitmirrors 1 -n new_name vg/lv /dev/sdc1
# ^ Completes split ^
If a split is performed on a RAID that is tracking an already split image and
PVs are provided, we must ensure that
1) the already split LV is represented in the PVs
2) we are careful to split only the tracked image
RAID is not like traditional LVM mirroring. LVM mirroring required failed
devices to be removed or the logical volume would simply hang. RAID arrays can
keep on running with failed devices. In fact, for RAID types other than RAID1,
removing a device would mean substituting an error target or converting to a
lower level RAID (e.g. RAID6 -> RAID5, or RAID4/5 to RAID0). Therefore, rather
than removing a failed device unconditionally and potentially allocating a
replacement, RAID allows the user to "replace" a device with a new one. This
approach is a 1-step solution vs the current 2-step solution.
example> lvconvert --replace <dev_to_remove> vg/lv [possible_replacement_PVs]
'--replace' can be specified more than once.
example> lvconvert --replace /dev/sdb1 --replace /dev/sdc1 vg/lv
LVM metadata knows only of striped segments - not linear ones.
The activation code detects segments with a single stripe and switches
them to use the linear target.
If the new lvm.conf setting is set to 0 (e.g. in a test script), this
'optimisation' is turned off.
Remove FIXMES - there should not be any pool free call since
the memory pool is from device manager, and pool is detroyed
after the operation, so doing extra free here would not help here.
However lv_has_target_type() is using cmd mempool so here the extra
call for dm_pool_free makes sence.
"result_independent_of_operands: ((dev->dev & 0xfff00UL) >> 8) ==
18446744073709551615UL /* -1 */ is always false regardless of the values
of its operands (logical operand of if)."
'dev->dev' is set in dev-cache.c _insert() and it's not expectable
st_rdev would have '-1'
This code has been introduced with drbd support commit and code never
worked - so eliminated.
Use static buffer instead of stack allocated buffer.
This reduces stack size usage of lvm tool and the
change is very simple.
Since the whole library is not thread safe - it should not
add any new problems - and if there will be some conversion
it's easy to convert this to use some preallocated buffer.
For write we do not need to hold memory locked.
This relaxes many conditions and avoid problems when allocating
a lot of memory for writting metadata buffers.
(In case of huge MDA size this would lead to mismatch between
locked and unlocked memory region size).
Add also internal check we are not writing in critical section.
Removal of an inactive origin removes also all related snapshots.
When we now support 'old' external snapshots with thin volumes,
removal of pool will not only drop all thin volumes, but as
a consequence also all snapshots - which might be seen a bit
unexpected for the user - so add a query to confirm such action.
lvremove -f will skip the prompt.
