IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Just like 52656c89fd
when now cache is compiled in 'unditionally'.
This patch is actually enforce by changes in
commit: 2bc896f2a3
where CACHE value is not set anymore.
Usage of dm_delay looks to be slowing not just 'delayed' portion
of device, but due to the fact it's also slows down ANY flush
operation on such device it's overal speed impact is huge.
In some case we can however user other methods to slowdown disk writes,
in case of old dm 'mirror' target we can throttle I/O of mirror
synchronisation giving the next commands enough time to test couple
race conditions.
Usage:
throttle_dm_mirror [percentage]
Thtrottle down sync speed (lowest is '1' which is also default when
unspecified)
restore_dm_mirror
Restores the value of throttling before call of 'throttle_dm_mirror'
Usually it should '100'
Currently usage of loop device over backend file in ramdisk (tmpfs)
is actually causing unnecassary memory consution, since just
reading such loop device is causing RAM provisioning.
This patch add another possible way how to use ramdisk directly
through 'brd' device when possible (and allowed).
This however has it's limitation as well - brd does not support
TRIM, so the only way how to erase is to remove brd module ??
Alse there is 4K sector size limitation imposed by ramdisk.
Anyway - for some mirror test that were using large amount of
disk space (tens of MB) this brings noticable speed boost.
(But could be worth to solve the slowness of loop in kernel?)
To prevent using 'brd' for testing set LVM_TEST_PREFER_BRD=0
like this:
make check_local LVM_TEST_PREFER_BRD=0
When 'dmsetup' reports result with --nameprefixes it currently
incorrectly 'escapes' problematic characters.
Letting pass such string though shell 'eval' function is hard task.
So instead cut away substring.
Once dmsetup will start to properly escape backslash and apostrophe
this function may need further tuning.
With problematic kernels raid devices can be occasionaly left with
'frozen' status - try to 'unfreeze' them with idle message on teardown.
Also replace couple greps with 'built-in' dmsetup --select feature.
Note: dmsetup --select currently reports 'No devices found' on stdout
and return success - looks like a bug to fix.
Sleep a bit before checking /sys/block dir so the kernel has a moment to
actually put scsi debug device in it...
Some quite old kernels are in troubles with this plain searching grep
without sleep (namely 2.6.32)
modprobe scsi_debug
<sleep .1>
grep -H scsi_debug /sys/block/*/device/model
modprobe -r scsi_debug
lvmdbusd was started, but the process was not recognized by pgrep.
- configure does not make the script executable - set the flag
explicitly when running make check,
- process name changed to lvmdbusd. The previous python3 value
originated from the use of /usr/bin/env.
Commit 8a912d6dbc missed the wrong logic,
we use 2 vars 'dev' & 'mddev' and their usage can't be mixed.
So correctly separate them so mddev keeps name of MD device.
During test do a more close selection of visible devices.
If some test leaks a device with LVMTEST prefix, next
test should not be influnced (or parallel running one).
If the test is running in non-/dev dir - it's already protected
by full path with $PREFIX in it - however it test is running
in real /dev dir - there was no such protection and test
were confused when they have seen such leaked device.
Patch 72a58ce4b0 was wronly placing
double quotes around this variable which we want to pass expanded,
as it's just set of 'space' device args ATM.
TODO consider using array[@] to make this cleaner.
Add shellcheck directive to skip warning here
Use 1 logic for 2 loops tearing down left device.
First loops tries to remove all closed devices with 'normal' remove.
Second loop tries to replace those left devices with 'error' target.
We can't really sleep that much in teardown as it slows test too much.
So do a nested loop (similar to 'dmsetup remove_all') and keep
removing devices with open count == 0 as long as it works.
When we want to squash as much device as possible,
it's better to give it some delay, so devices have
some time to release it's resouces for next removal.
Also drop surrounding cookie processing and let each
dmsetup call run on its own.
The checking order here has happend after TESTDIR was removed
resulting in weird further error on trap path.
Properly check for unexpected dmeventd before removing TESTDIR
since 'trap' codepath is still using it.
Also try to kill this unexpected dmeventd so testing is
not skipping all next dmeventd tests.
(Downside would be - if user would be accidentally starting
dmeventd by some regular system admin work - such dmeventd
might be killd if it's unused. It can't kill dmeventd in-use.
Correctly skip the test when lvmdbusd is found already running.
For pgrep usage we need to add '-f -l' options to get python3 name
printed.
Remove no longer used 'pids' local var.
In order to support striped raid5/6/10 LV reshaping (change
of LV type, stripesize or number of legs), this patch
introduces the changes to call the reshaping infratructure
from lv_raid_convert().
Changes:
- add reshaping calls from lv_raid_convert()
- add command definitons for reshaping to tools/command-lines.in
- fix raid_rimage_extents()
- add 2 new test scripts lvconvert-raid-reshape-linear_to_striped.sh
and lvconvert-raid-reshape-striped_to_linear.sh to test
the linear <-> striped multi-step conversions
- add lvconvert-raid-reshape.sh reshaping tests
- enhance lvconvert-raid-takeover.sh with new raid10 tests
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
When the test would need to try to write some large amount of data
we can give it 'zero' segments - for obvious reason such written data
can't be verified but in some test cases it doesn't really matter.
Usage follows 'error_dev' style.
For now test suite is not supporting any combination of
error/delay/zero segments so only 1 type could be used per PV.
- support shrinking of raid0/1/4/5/6/10 LVs
- enhance lvresize-raid.sh tests: add raid0* and raid10
- fix have_raid4 in aux.sh to allow lv_resize-raid.sh
and other scripts to test raid4
Resolves: rhbz1394048
Since we still experience occasiaonal test failure - slow
things down even more to avoid race.
Add support for 'quick' table changes between normal & delayed tables.
0 interval leads as of now to a busy loop with lvmetad and command.
Avoid testing this patological case.
TODO: Code should possibly translate zero interval into some small
sleep. With lvmpolld it's already 1/10s
'lvchange --resync LV' or 'lvchange --syncaction repair LV' request the
RAID layout specific parity blocks in raid4/5/6 to be recreated or the
mirrored blocks to be copied again from the master leg/copy for raid1/10,
thus not allowing a rebuild of a particular PV.
Introduce repeatable option '--[raid]rebuild PV' to allow to request
rebuilds of specific PVs in a RaidLV which are known to contain corrupt
data (e.g. rebuild a raid1 master leg).
Add test lvchange-rebuild-raid.sh to test/shell doing rebuild
variations on raid1/10 and 5; add aux function check_status_chars
to support the new test.
- Resolves rhbz1064592
TODO: it might be better to log dmeventd messages with test output
just like we do with clvmd - maybe we will switch to this one
instead of extra DMEVENTD log file in future....
When force removing thin-pool we loose 'real' access to hidden device,
and if such pool is in suspended state, any thin volume cannot be
dropped. It likely should be also checked by dmsetup, but meanwhile
apply simple logic - try to force remove first all higher minors first
with assumption we first create thin-pool and then thin volume
and there are usually not being released lower dm numbers to
get the order wrong.
For raid1 use chunksize as bitmap-chunk specification.
Always enforce usage of bitmap - getting comparable outcome
as lvm2 raid support uses.
Add udev_wait after stopping md array - as in fact leg-device
are still in use by target even command has finished.
(mdadm --stop causes WATCH rule wakeup, and
ioctl(STOP_ARRAY) returns IMHO to early - it should finish
and fsync work on leg devices first).
Rather then skipping whole test - just do not use it.
Failing tests that have required delay need to deal with reality
and shell either check for HAVE_DM_DELAY and skip portion
of test or using should when needed.
Hopefull 4.3 will be fixed and test will be updated to let
raid test running again.
Meanwhile using md-raid may effectively kill kernel,
so leave at least other tests running.
Since now we enable those by default when compiled with those daemons,
explicitely disable them in tests when needed.
Alphabetically sort configurables.
Introduce LVM_TEST_LVMETAD_DEBUG_OPTS to allow to override
default debug opts for lvmetad.
However could be still overloaded on command line:
make check_lvmetad LVM_TEST_LVMETAD_DEBUG_OPTS="-l all"...
Better name for aux function.
First use normal -TERM, and only after a while use -KILL
(leaving some time to correctly finish)
Print INFO about killed processes.
New lvmconf function is using bash associative arrays - however
older systems like RHEL5 doesn't provide this feature. In this case
stay with older variant.
Restore support for use case like this:
aux lvmconf 'tags/@foo {}'
some tests left dangling bg processes originating in
lvm2 commands being able to spawn any bg polling process
(lvchange, vgchange, pvmove, lvconvert...)
Initial fn 'add_to_kill_list' should collect processes with
specific parameters (proc's command line and parent processes ID).
After testing finishes the fn kill_listed_processes should remove these
listed by 'add_to_kill_list'.
Unfortunately it proved to be prone to an error especially in scenarios
where cmd line of initiating command contained characters required to
be espaced before passing to shell script to make it work correctly.
(Or if cmd spawned more than one bg process with same cmd line. i.e.:
vgchange or lvchange).
The new implementation is much simpler. It uses env. variable (LVM_TEST_TAG)
for marking a process desired to be killed later or during test env. teardown.
(i.e.: LVM_TEST_TAG=kill_me_$PREFIX to kill only processes related to
current test environment)
When test is executed on real device - lets try a more complete
cleanup - discard whole device first and try to wipe any
headers it might be left from previous test.
When test suite is used from installed rpm package
we need to handle things better.
This patch is rather first approach - expecting few more
tweaks needed.
Enhance 'not' to manage autodeletion of log files in right cases.
Use separately marked epoch log files for clvmd and dmeventd.
Properly manage stack tracing for new debug.log names.
Previous commit has made have_cache & have_thin producing
false return value.
Fix it and at the some time provide much better reconfiguring
warning message.
If the test machine is missing needed and configured binaries
it will produce TEST WARNING result.
